Confused! Airport or Airport Extreme for M9145

Hi there folks.
I'm slightly confused over this one.
I've read on a number of forums and resellers that my PowerMac G4 MDD 1.25, or more specifically the M9145 is able to take an Airport Extreme card - but then in the next breadth I read that it takes the standard Airport card!?
Hence me being confused!
Could anybody out there please confirm to me as to which one it actually requires? Also, any chance of a part number?
Many thanks in advance.
Regards, Mark.

The M9145 comes up as the dual 1.25GHz MDD from 2003. That is, it takes the older, original AirPort card.
Now the painful part, for the wireless speed the original AirPort card offers, you may as well put a chocolate biscuit in the AirPort card slot. In todays wireless standards, it's really painfully slow.
You could look at a PCI wireless option, or an Ethernet attached WDS router option. Both would come in at about 50x faster, and probably cost less too. Or live with an Ethernet connection to your router.
If you're only going to use the MDD for web browsing, rather than connecting to other local computers, and you're not on superfast broadband, then the original AirPort card may be OK.

Similar Messages

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
Open AirPort Utility, select the Time Capsule, and click Manual Setup
Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
Next, click the Wireless tab located to the right of the Time Capsule tab
Change the setting for Wireless Mode to Off
Click the Internet icon, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
You are all set

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

How to setup the Airport Extreme for PSP?

Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
PowerBook G4 Mac OS X (10.4.3)

Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

How to setup the airport extreme for window xp

How to setup the airport extreme for window xp

Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

Is there a way to test airport extreme for optimal function

Is there a way to test airport extreme for optimal function?

In your Mavericks OS X.
Go to the WiFi icon on the top right.
Hold the option key and click.
At the bottom of the list you will see "Open Wireless Diagnostics"
Open this and you can diagnose your wireless network.
While it'sopen hit the Command + 2 and it will open the Utilities window.
This will give you and overview of interference and what channel is best.
You can alos run a speedtes over WiFi then run a speedtest directly connected with ethernet.

Using an aiport express + airport extreme for printing.

I have an airport extreme to which I connect a lexmark color laser printer. Everything works well. I just moved and am now using DSL. There is no phone jack in the room where I want to put my printer. Can I use the airport extreme for my wireless internet through my dsl phone line and then use an airport express to hook up my printer and print wirelessly? Can I use a second airport express for a second printer which will go in yet a different place?

Another option would be to setup the Express units as clients on your Airport network especially if you don't need to extend your network.
You will still be able to print, but avoid the bandwidth hit that using WDS (extending the network) has.
iFelix

Is it worthwhile to buy the airport extreme for non intel

I currently am using an airport express for my home network and want to use it on my home stereo(upstairs) so we can play music from itunes. So I need to buy another airport for downstairs. Will I get any benefit from the extreme or should I just get another express?

idadof3, Welcome to the discussion area!
I think iFelix provided a very good answer in your other thread "Is it worthwhile to buy the airport extreme for non intel".

Is it possible to share a disk on airport extreme for both Time Capsule use and Windows use

Hello
I was hoping to add some better backup capacity to our home. Can I use the same disk attacheded to the USB port of an Airport Extreme for Time Capsule use for our Macbooks, as well as general use by the windows laptops> If not is it possible to add multiple disks to the Airport Extreme and designate one for Mac Laptops, and the other for Windows use.
Regards
Ted

Regardless of the client's OS, you can use the AirPort Disk (USB HDD attached to the AirPort Extreme's USB) port as a 'NAS' device. You also have the option of partitioning it if you actually want separate volumes to be used between Mac or Windows clients. I would recommend partitioning it for Mac OS Extended (Journaled) which would also format it for HFS+. Normally HFS+ volumes are not readable (natively) by Windows, but the Extreme's File Server will share this drive out with both AFP (for Macs) and SMB (for Windows/Linux) clients.
However, one note of caution. Do NOT use this AirPort Disk for Time Machine backups as this is NOT supported by Apple. Although a number of users have done so, a number of them also post here complaining of corrupted backups.

Hi having trouble setting my airport extreme for guests?

hi having trouble setting my airport extreme for guests?

This is likely because you have the AirPort Extreme connected to a modem/router, or gateway device.....and not a simple modem. Can you provide the make and model number of your "modem", as we previously asked?

Having trouble setting my airport extreme for guests

hi having trouble setting my airport extreme for guests?

Please see your other post on exactly the same subject.

Is Internet Explorer incompatible with Airport Extreme for connecting wirelessly to the Internet?

repeat -is Internet Explorer incompatible with Airport Extreme for connecting to the Internet- I am trying to hook up my sister's / Windows 7...HP mini computer to my wireless connection (Airport Extreme to cable /BrightHouse ) all I get is -failed due to 'error 651' -am about to call the jockeys at the cable company to see if they have work-around. Any comment appreciate. Thanks./jimiros

Diane,
I have added very few apps to my G5. The majority of my time is spent editing photos with PhotoshopCS3. I have software updates set to run weekly and have always kept them up to date. I really believe it's a disk permissions issue...but repairing them doesn't help.
*+Upon installation, I used Archive and Install.+* While I agree that Erase and Install may sound like a good idea, it makes me nervous. I do have everything backed up on a bootable CMS drive, but I'm a photographer and was hoping to not have to erase the G5.
Yes, as I mentioned in the original post, I've downloaded and installed the Airport firmware update. And all software is up to date.
All was working just dandy before the upgrade. Unfortunately now it's sounding like I may have to erase my hard drive and install fresh.
If I do that, is it just a matter then of dragging my photos from the backup disk to the G5? And documents? Etc?? The thought of getting all my photos and important information back on the G5 seems a bit staggering.

I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections. How do I get the two networks to connect?

I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections. How do I get the two networks to connect to each other?

Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl This way I can just use one of the LAN outputs from the Airport to feed the FVS318. Here is what I think I am hearing you say:
Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
To remedy the situastion here is probably what I need to do in order:
1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
2. Then, disable the Netgear FVS318G as a DHCP server.
3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
4. Restart everything.
Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict? I have the Airport Utility. I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
Thank you.
Steve

Still possible to use airport extreme for time machine?

I know apple doesn't officially support it but I remember with one of the airport utility updates, it allowed you to use an external HDD with an airport extreme for time machine backups. I tried hooking my external western digital to my airport extreme and it showed up as an airport disk, however I couldn't get time machine to access it. Is there a way I can get this to work?

I followed the instructions found on the link above and had a couple of issues:
1) Instructions state "Make sure 'Share disks over Ethernet WAN port' is checked." Could not find that check box anyplace.
2) Using first disk and then airport passwords as security, the disk does not show up in the Time Machine preferences. Am I to mount the disk first? Does not state that in the instructions.
3) If I mount the disk in the finder (security is a disk password), I am then able to see the drive in Time Machine and the back-up commences. The disk icon appears on my desktop and contains machine.sparcebundle. Another "disk" also appears on my desktop with the name "Time Machine Backups" and which contains the folder Backups.backupdb. I am also able to remotely attach to the machine doing the TM backup from another mac on the network and login.
4) Back-up started and appeared to go well (240G backed up with several partials after that) until I rebooted.
5) After reboot, it was frozen in "Making backup disk available" Opened preferences and it locked up. Had to force a reboot.
6) After restart, manually mounted the extreme external, opened Time Machine prefs, and when selecting back up location saw one with a red "∅" which I could not select and the other the extreme drive with 240G used. Attempted the back-up to the drive and I got "Making backup disk available" on the menu bar and the same message on TM system prefs with a spinning beach ball. Have been able to force quit system prefs and sent to error log to apple, but a forced reboot is still required because the TM icon on the menu continues to spin. Even a "sudu shutdown -r now" in terminal will not reboot the machine. Get to a blue screen with the spinning tick marks and it just sits there.
I wonder if the fact that I could not find "Make sure 'Share disks over Ethernet WAN port' is checked." is the issue. It does not appear to be available in the current version of the extreme base 7.4.2. Could those of you who were able to configure it with a previous version get grandfathered in? I wonder if I need to manually mount the extreme hard disk each time I reboot the machines. I am not sure how to do that but will try and see if it works.
I will be losing internet and e-mail access for a few weeks so will look at this thread again when I return.

Confused! Airport or Airport Extreme for M9145

Similar Messages

Maybe you are looking for