Confused between the e6 and c7!

I want a phone that's going to last for a long time. It should withstand regular drops and knocks..is it safe to buy a touchscreen phone with a 'gorilla glass' display? How long is the touch sensivity going to last? Please help. I'm really confused!

touch sensitivity and the phone itself would last many years as long as you take good care of it.
why drop it and knock it on the ground? :/
take care of your things and they will last "forever".
Greece Nokia X6 RM-559 v40.0.002

Similar Messages

I have purchased a new iPad and given my old one to my husband. How do I change the Apple ID over to him. We are having continuous confusion between the two iPads

I have purchased a new iPad and given my old one to my husband. How do I change the Apple ID over to him. We are having continuous confusion between the two iPads

Hi Marg42,
Thanks for visiting Apple Support Communities.
First, your husband can create his own Apple ID via the web, computer, or iPad, if he hasn't already:
My Apple ID
https://appleid.apple.com
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/ht2731
Next, he can sign out of the Apple services that are currently using your Apple ID on your old iPad, and sign in with his own.
This article has instructions for doing so for specific Apple services:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Alternately, he can erase the device and set it up as new using the steps in this article:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/ht4137
Best Regards,
Jeremy

Show difference between the years and how much money increased ever year

Hi everyone
I need to make the following code show how many years it took for it to reach its required goal.
show difference between the years and how much money increased ever year. ..
I am totally confused at the moment... any help would be greatly appreciated...
declare
a number(9):=1000;
b number(9);
c number(9);
d number(9);
begin
for d in 2012..2099
loop
dbms_output.put_line(a||' '||d);
if a >2000 then
exit;
end if;
a :=a + a*10/100;
end loop;
end;
Result for above query:
Price Years
1000 2012
1100 2013
1200 2014 etc...
I need to show the amount of years it took to reach its goal, which was $2000
and also the change in price, how much it increased every year...
Thanks
Umair

960361 wrote:
Hi everyone
I need to make the following code show how many years it took for it to reach its required goal.
show difference between the years and how much money increased ever year. ..
I am totally confused at the moment... any help would be greatly appreciated...
declare
a number(9):=1000;
b number(9);
c number(9);
d number(9);
begin
for d in 2012..2099
loop
dbms_output.put_line(a||' '||d);
if a >2000 then
exit;
end if;
a :=a + a*10/100;
end loop;
end;
Result for above query:
Price Years
1000 2012
1100 2013
1200 2014 etc...
I need to show the amount of years it took to reach its goal, which was $2000
and also the change in price, how much it increased every year...
Thanks
UmairHow do I ask a question on the forums?
SQL and PL/SQL FAQ

Confuse between SAP Kernel and SAP Installation file

Dears:
My CPU is ADM 64 bit, but when i try to download the ECC5 which will be installed in linux 32 bit system from SAP site, i find the confuse between SAP Kernel and SAP instllation file.
1. In the ECC5 download page, i can see lots of oracle download file, some named DVD ORACLE RDBMS 10.2 LINUX_IA32 1 of 4 , some named Oracle 10.2.0.2. for LINUX32. So if the LINUX_IA32 is only for the CPU which is Itanium CPU?
2. I check the sap update kernel, SAP Kernel 32 bit unicode is devided by sap kernel 6.4 320-bit unicode---Linux on IA 32-bit, so if my CPU is AMD 64 bit, but my os is Linux 32 bit, if the upgrade kernel file Linux on IA 32-bit can be used for Linux 32 bit system whith 64 bit CPU, or if the Linux on IA 32-bit is just for Itanium CPU?

Hello again
I just checked the pam again, and it looks like i got it wrong. There is still 32-bit available for ECC5.
ORACLE 10.2 LINUX REDHAT EL5/IA32 32BIT 24.07.2007 Released SAP KERNEL 6.40 32-BIT
So technically it should be possible to install it the way you wanted. Sorry for my misleading post (but hey you should still consider using 64-bit :-).
Best regards, Michael

Confused between delivery,shipping and shipment

Hi Gurus,
               While going through SD flow, I just confused between shipping, delievery and shipment. Can you please explain the complete process and tell me what exactly we do in shipping, delievery and shipment.
My e-mail id is [email protected]
Thanks and Regards
Rajat Garg

Hi Rajat,
Shipping:
      shipping activities perform before delivering the goods to the ship to party,
like time take to pick the goods, packing of those goods into carts ( as per the its packing system), loading this packed goods into truck ( or any vehicle which uses to ship the goods).
Delivery:
starting from the shipping point,how much time taken to reach the customer,
might be travelling time, stages like,if itz through Air, initially this load should go airport, from there customer country , n frm there to actual ship to party location.
Transporation:
        Moving of the goods, in which transporation mode, as we have roadways, railways, by air,
how many stages involved ( itinaries), from which route,all comes into transporation.
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/d5/2285347860ea35e10000009b38f83b/frameset.htm">Transporation</a>
hope this adds info
*reward points

Communication between the computer and the disc drive failed

The disc can’t be burned because because communication between the computer and the disc drive failed (error code 0x80020022). This computer has been out of the box for less than a month and this has been a growing problem.

My problem was FIXED at the apple store..... there was something wrong in the system preferences and the genius deleted something that recreated it's self. Surely enough we we're able to burn a 600 mb dmg of nothing onto a few test disks. For anyone having this issue...it's NOT The media, it's some configuration issue within the computer's preferences. I'm telling you all to take your machine to the nearest apple store and have them fix it, if your machine is still under warranty the fix is free. There was no hardware issue, so the optical drive was not replaced.

Tethering via USB between the Z10 and a laptop or PC & and few Comments About the Playbook Tethering

Tethering via USB between the Z10 and a laptop or PC can be a bit tricky.
On the Z10 do the following:
On the Z10 go to the Settings.
Go to Network Connections.
Go to Internet Tethering.
Select USB.
Turn on Tethering.
On the computer run the Blackberry Link software for the Z10:
Once the software starts, connect the Z10 via the USB cable to the PC.
Open the browser.
You should now be able to cruise the net, and do emails.
With the Playbook, the Bluetooth tethering does not yet work. This may be an OS or communications issue.
The best way to tether the Playbook for full speed and functions is using the WiFi option. Simply turn on the WiFi hot spot option and follow the instructions. The Playbook WiFi must also be properly set up. The Z10 USB and Bluetooth tethering mode must be turned off when using the WiFi mode. You can leave the base Bluetooth active on the Z10. There is a lot of available information about using the WiFi hot spot from the Z10. The process is very similar to the past models of Blackberry phones.
If you use the Bridge mode to tether, the Playbook email client software does not work very well. The browser will work fairly well, but slower with the Bridge mode. With WiFi the Playbook can brows at very high speed. With Bluetooth it is restricted to about 1.5 to 2.5 mb/sec. Take care that the WiFi mode burns through battery time very fast on both the Playbook and the Z10. Using the Bridge mode uses less power consumption than WiFi.
To use the Bridge mode, make sure the Playbook and the Z10 are first Bluetooth mated. Also the Bridge mode has to be set up between the devices. You will have to first install the Bridge software in to the phone for this to work.
I did extensive testing between the Z10 and the Playbook. They function well together as far as Internet and email are concerned, in consideration of using either tether or Bridge, depending on what you want to do.
From what I understand the Bridge mode uses some compression. It will not be as fast as using WiFi or Bluetooth tethering. The data cost using the Bridge mode is probably a bit lower because of the compression.
As far as the Bridge phone options are concerned, these features are not yet available. From what I read in a number of articles there are going to soon be some updates coming out to fix this. The Bridge options are a big part of the tablet application with the Blackberry phone. This was the big original application point of this tablet, otherwise any generic tablet would do the job.
Jerry G.

From the look of this thread it appears that no one outside of Canada uses an OS 10 BB yet. 247 views and no comments or help ? I'm sure I'm not the only BB user that uses Tether. If BB doesn't care to help then this will just be another nail in the corporate coffin that has been projected.
Maybe we need different forums for US users as the Canadians don't seem to have the same issues or cares.
The whole idea of the app Tether is not to have to pay the outrageous tethering fees that US carriers charge and it has worked well for years. But it can't work and won't work in the future without help from BB and the BB community.

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

What are the major differences between the air and the pro

what are the major differences between the air and the pro?

In a nutshell, the Air is a lightened, more compact system than the 13" Pro counterpart. The Air loses some hardware features to accommodate the physical downsizing.
No FireWire port
No built-in optical drive
A lesser performing CPU to retain battery charge life, and adequate cooling.
No Ethernet port
No Kensington lock slot
The Air does have a superior native resolution at 1440 x 900, and a standard SSD that does make up alot of the speed differential, and then some. Of course, the 13" Pro can be optionally configured with an SSD.
You buy the Air if the physical size an weight savings are demonstrably more important than the features lost.

Is it normal for there to be a gap between the glass and bezel on iPhone 5?

As you can see, there's a really small gap between the glass and the rim (frame) whatever you want to call it. I can fit a piece of paper there, as u can see.
It also collects dust. It's annoying.
Is it normal and can it be replaced under the 1 year warranty? I bought the device just 2 weeks ago and haven't dropped it or anything.

Is anyone else seeing this on their phone or is it just me?

I'd like to toggle between the source and timeline and bypass the program tab - what is this called in the shortcut tab?

When editing, I have to press my shortcut twice to get back to the source window as it goes via the program monitor first. Is there an assignable shortcut just between the timeline and source? If so, what is it called?

If so many people have the same question and concern about this, why is it consistently ignored? I've seen countless posts like this that are told to ignore the logs or to only dump when asked to. How can those of us that have these questions get an answer? Can I im someone who can help me or are they being ignored because it it evidence that our devices have been jailbroken without our knowledge?
If you can point me in the direction of someone who is willing to help I would greatly appreciate it!
Thanks in advance!

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

While not in edit mode:
- if start typing numbers, then it enters number mode.
- if start typing text, then it enters text mode.
Using the arrow keys exits edit mode. So this should work for you:
1 Type text into a cell, which enters text mode.
2 Press Return to move to the next cell.
3 Press right arrow key to exit edit mode.
4 Press left arrow key to get back to the cell.
5 Type a number, which enters number mode.
Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
This all works fine for me. Hopefullly it does for you also.

Price difference between the requisition and the order

Hi All,
There is new functionality in ERP6 that checks the difference in price price between the requisition and the order. The configuration is under Purchase Requisition -> Tolerance Limits -> Define Tolerance Keys. This is very useful functionality when the requistion item is approved at an estimated price, but a purchasing group needs to change the $ value it will block the Purchase Order.
I have this configuration menu available in SPRO in one of my systems (IDES), however on a newly installed ERP6 system we are missing this menu path in SPRO.
Does anyone know why this menu path in SPRO is missing on some systems...

Thanks Henry,
I've done some digging and the tables that store these config settings are part of US Federal Governement addons.
Looks like all the (non government) sites that need it aren't able to have it. Great shame really as this would be very useful to communicate with the requestor whena price difference occurs.

I received a car charger for xmas. I have an iPhone 4. Is there a difference in the charging dock between the older and newer iphones? I don't want to damage it by shoving a cable in that is designed for a newer model.

I received a car charger for xmas. I have an iPhone 4. Is there a difference in the charging dock between the older and newer iphones? I don't want to damage it by shoving a cable in that is designed for a newer model.

there are 2 connectors the old pin30 and the new ligthing bolt
they don't look very much alike so if anybody were damage byt forcing it in it would be their own fault seeing how diffrent they are

Confused between the e6 and c7!

Similar Messages

Maybe you are looking for