Confused - getting wierd results

NOTE: Please keep the explanations very simple - I'm a computer science/biology student working as an intern, and I probably don't have as much experience as some of the professional software engineers who write into this forum.
I'm trying to create a simple database application.
I am able to add a protein to the database I've created, but I keep running into problems when I try to retrieve the ProteinID ("pid")
from the database.
When I run the code that I have included at the end of this message, I get some very wierd results. A few times I was actually able to retrieve the correct pid, but most of the time my program just outputs 0.0 for The_Source_ID.
The only thing that I changed when between runs of this program is whether I use the code
double The_Source_ID;
The_Source_ID = TheInterface2.getSourceID_Protein(ProteinName);
System.out.println("The Source ID is " + The_Source_ID);
before or after the AddProtein() function.
Also, once when I ran my program, I got the error message....
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x771E312E
Function=CoGetComCatalog+0xD88
Library=C:\WINDOWS\system32\ole32.dll
On another post where someone asked about this problem, ....
http://forum.java.sun.com/thread.jsp?forum=37&thread=235942
http://forum.java.sun.com/thread.jsp?forum=37&thread=213559
-- The problem is that I don't have a full understanding of what the responses to the above posts mean. ---- I don't understand how my code can be incorrect if my program occassionally gives me the correct results.
Any ideas?
public void AddProtein() {
     System.out.println("");
     System.out.println("You may add this protein.");
     TheInterface2.AddProtein_ByName(ProteinName);
     GUI_ProteinDetails ProteinDetails = new GUI_ProteinDetails();
     ProteinDetails.initWithProteinName(ProteinName);
     double The_Source_ID;
     The_Source_ID = TheInterface2.getSourceID_Protein(ProteinName);
     System.out.println("The Source ID is " + The_Source_ID);
     System.out.println("");
}

sorry about that
----- i realized my error just after posting this message

Similar Messages

  • Custom Search Portlet not getting the results as expected.

    Hi All,
    I am using CustomSearchPortlet and I am having following problems. I created an itemtype IT with attributes A1,A2.Then I configured my custom search portlet to search based on A1,A2 attributes only. I have created 3 instances of items Item1,Item2,Item3 based on itemtype IT as follows
    Item1(A1=value11,A2=value12)
    Item2(A1=value21,A2=cat22)
    Item3(A1=value11,A2=value32)
    and when I search for value11, I get Item1,Item3 as results. Till here it was nice and behaving as expected. Suddenly after some time, it stopped working and i am not getting the results I used to get before. The only thing i remember to have changed in the meanwhile was to change the A2 attribute values of some of these items. my searchtext remained the same as value11. I was confused as to why the custom search portlet is not getting these results that it was getting before...Thanks for any help in solving this.
    Thanks,
    Prasanth.

    Hi,
    If Oracle Text is enabled in your portal, the updated items need to be synchronised before they can be returned in the Search. Since you updated those items, though not changing values for this particular attribute, it will be in the queue for indexing and hence will not be returned until it is indexed.
    Thanks.

  • How to comple query to get correct results?

    Hello,
    I am having problems getting the results from a query.  I have 2 tables:
    Marriage table
    People1ID People2ID DateMarried
    1 4 5/5/2014
    5 7 6/5/2014
    2 3 7/5/2014
    People table
    PeopleID First Last
    1 Bob Jones
    2 Mary Smith
    3 Steve Smith
    4 Jane Jones
    5 Robert Apple
    6 Julie Jackson
    7 Diane Apple
    Looking for result like this:
    First1 Last1 First2 Last2 DateMarried
    Bob Jones Jane Jones 5/5/2014
    Robert Apple Diane Apple 6/5/2014
    Mary Smith Steve Smith 6/5/2014
    Paul

    I'm little confuse on your expected result specially on the third row column "Datemarried". Are you sure that its 6/5/2014. I think its 7/5/2014. Anyway you can try this query.
    select b.[First], b.[Last],
    c.[First],c.[Last], 
    a.DateMarried from marriage a
    left outer join People b
    on a.people1id=b.peopleid
    left outer join People c
    on a.people2id=c.peopleid
    this will be the result:
    First Last
    First Last
    DateMarried
    Bob Jones
    Jane Jones
    5/5/2014
    Robert Apple
    Diane Apple
    6/5/2014
    Mary Smith
    Steve Smith
    7/5/2014

  • How do I get the results of 2 text fields and put the output into another ?

    I have 2 text fields that multiply off of each other.
    My question is, is there a way to get the result of this and put it into another text field? And from that result get another result? Or do I have to get the results from a textarea?

    I have 2 text fields that multiply off of each other.I assume this really means you want to have something else multiply the contents of the two text fields. When you are using an object-oriented language, it is helpful if you consider what objects are responsible for what actions. Loose descriptions lead to confusion.
    My question is, is there a way to get the result of
    this and put it into another text field? And from
    that result get another result? Or do I have to get
    the results from a textarea?Assuming that your "text field" is a Swing text component (and not, say, an HTML text field) then it has a getText() method that returns the contents as a String. If you plan to multiply this by something then you'll want to convert it to an int or a double or maybe a BigInteger or a BigDecimal object. Are we on the right track here?

  • Can't get the result if I use SUBSTR From the resultSet

    Hi,
    I have a request that make some changes on a String data.
    This modification is an extraction of a sub string with SUBSTR function of oracle.
    The problem is that I can to get the result on my java code
                   pst = connect.prepareStatement(GET_PATH);
                   rset = pst.executeQuery();
              while (rset.next()) {
                   String chemin = rset.getString("IMG_PATH"); // rset.getString(2);
                   system.out.println("Le chemin récuperé de la base est : " + chemin);
                   chemins.add(chemin);
              }this is the request :
    SELECT DISTINCT nl.img_id, SUBSTR(ni.img_chemin, 1, INSTR(ni.img_chemin, '\', -1)) IMG_CHEMIN from images nlThe oracle documentation say the SUBSTR function return a STRING type.
    Thnaks for your help. (And sorry for my little english)
    Technical Information :
    DB : ORACLE
    DRIVER VERSION : ojdbc14-10.2.0.3.0.jar (tested with version 9 same thing)
    Java 6 update 3
    Edited by: Aberghouss on 29 août 2008 17:11

    Aberghouss wrote:
    Hi,
    I change the INSTR(ni.img_chemin, '\', -1) by number 20 and the program get correctelly the value
    SELECT DISTINCT nl.img_id, SUBSTR(ni.img_chemin, 1, 20) IMG_CHEMIN from images nlNow have you any idea how can I resolve this problem with INSTRLittle confusing what you are actually doing.
    You need to post code that actually has the problem.
    Given that you are using names, rather than indexes, usually the problem is that the name doesn't match what is actually in the meta data. Try printing the meta data. And try using indexes just to verify that there is in fact a result (which would be another reason for not getting it.)

  • Paths that intersect - getting mixed results???

    CS3 - on OSX 10.5.2 Leopard
    I frequently have to add to existing product image paths, but get mixed results. Trial and error using the different clipping "modes" still has me confused. I'm looking for a consistent way to add to a path without overlapping path areas becoming a hole or "negative space", when placed in page layout app (Xpress 7.2)
    What am I doing wrong?, Thanks...

    You are right Curt, unfortunately its because Quark is fairly stupid at reading path data and always has been. There is a checkbox in there somewhere called "Outside edge only" which might help, if you need to keep your overlapping paths separate.
    You need to construct your paths in Photoshop properly using the Combine button and the "exclude overlapping areas" option.
    Maybe someone else has a better solution?

  • How to get the results in one line

    Hi
    if i use the script below i get the name of path and then : and in next line i get the results.is there a way to get the results from every path after the : and not in the next line?
    another question - is there a way that the script will not show the server name on every path?
    (Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter
    THC

    If you take you script and pipe it to get member, it will give you a list of various script properties.
    (Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | get-member
    You will see that the object type returned by "Get-Counter" is Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet.
    TypeName:
    Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet
    Name MemberType Definition
    Equals Method bool Equals(System.Object obj)
    GetHashCode Method int GetHashCode()
    GetType Method type GetType()
    ToString Method string ToString()
    CounterSamples Property Microsoft.PowerShell.Commands.GetCounter.Perfo...
    Timestamp Property datetime Timestamp {get;set;}
    Readings ScriptProperty System.Object Readings {get=$strPaths = ""...
    You can try grabbing different properties, and they will print out differently, displaying the data on the same line in some cases. For example, pipe your output to a "foreach-object" block, and then for each object print out the CounterSamples property.
    (Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | foreach-object { ($_).CounterSamples }
    This should all print on one line now. However, you also asked if there was a way to not have the server print out on every line. The way to control the format of these outputs is to use the "format-table" cmdlet. So you would pipe your output to format-table
    and then give it various options. This is how you would pipe it (without any options).
    (Get-Counter -ListSet LogicalDisk).PathsWithInstances |
    Get-Counter | object { ($_).CounterSamples | format-table }#OR USE YOUR ORIGINAL CODE(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
    Get-Counter | format-table }
    Now, it's up to you to give format-table the options you want. With no options, output will look unchanged. To see what options are available to you, use get-help.
    get-help format-table
    I hope this helps!
    Thank for all the info...

  • Best way to get UUT result to Custom TestStand UI

    Hello,
    I am trying to get the results of my UUT to my custom UI.  I am already using the EndExecution Callback to tell my UI when the UUT is finished executing.  I was hoping ot use that same callback VI to tell my UI the result of the execution. 
    The EndExecution callback includes a reference to the execution.  I figured I could read the "ResultStatus" Property, which seems to report "Passed" or "Failed" correctly, but if I terminate execution, it is still returning "Passed", when I would expect it to return "Terminated". 
    Does anybody have any thoughts on what I am doing wrong or what might be a better way to do this?  I thought of just using a UI Message, but then that requires me to modify the client sequence and post the UI message with the results.  I'd rather have this work for all client sequences. 
    Solved!
    Go to Solution.

    I think you are looking for handling the UIMsg_ModelState_TestingComplete user interface message.
    Refer to the help:
    UIMsg_ModelState_TestingComplete–(Value: 34) TestStand process models post this message to the user interface after the MainSequence in the client sequence file returns control to the model. If the execution is not a batch controller or a parallel controller, the stringDataParam parameter specifies the UUT result status. If the execution is a batch controller or a parallel controller, the value of the stringDataParam parameter is Done. The numericDataParam parameter specifies the test-socket index. The activeXDataParam parameter contains a reference to the sequence context for the process model sequence file that posts the message.
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing?

       How do I get iTunes 11 to work as the old iTunes did in this respect: after playing a song in one playlist, I click on another playlist, highlight a song, press play, and get the result of that song playing & that playlist continuing?  As it goes now, one clicks on the song in the new playlist where the arrow is and then chooses 'Play Song Next.'  So, it plays next, but then the song after that is back in the old playlist.  I want to use iTunes smoothly without the extra clicks I've had to do in order to get the playlist to continue.  This is music for background while I play the violin at restaurants, and extra clicks and hassle is quite unappreciated, especailly since it worked fine in the previous iTunes.
       Thanks.

    At the top of the playlist where it shows the playlist title and the number of songs, there are two icons. Click the "play" triangle to add the entire playlist to "Up Next", or the "shuffle" symbol to do the same thing but in random order. But the currently playing track will stop playing, and all the songs in "Up Next" will be removed (replaced by the ones from this playlist).
    If you hold down the "option" key while clicking those icons, the currently playing song will continue playing, and the new playlist will be added to "Up Next" (above the songs that were already there).

  • Ipod Nano 5th GenerationWindows xp.  My nano no longer opens automatically with file options menu.  Trying to import priceless videos of my daughter  from ipod to computer so I run it and get these results:  My computer/ipod/dcim/000apple and 75 IMG.DAT

    Nano 5th GenerationWindows xp. 
    My nano no longer opens automatically with file options menu when I connect it to my lap top.  Trying to import priceless videos of my daughter  from ipod to computer, However,  when I run it I get these results: I click onto  My computer/ipod/dcim/000apple and 75 IMG.DAT files come up.  Now I am almost sure those files shouldnt be on there.  If my memory serves me corrrectly the dcim folder is where one should be able to find video recording made with their iopd?If there is a way to import these videos without having to reset my ipod and lose precious videos please please let me know? HELLLLLLP

    Try: http://discussions.apple.com/thread.jspa?threadID=743515&tstart=15

  • 10.5.5 Client Getting No Results with Spotlight Search

    Hi -
    My company is slow to change. We are just now getting some Leopard workstations in our enterprise. The thing my users noticed right away was that under 10.5.5, they are unable to get any results from Spotlight searches on our Tiger Xserves over AFP. The Tiger workstation users can get search results from share points but not Leopard ones.
    The Xserves all have 10.4.9 Server installed. The XServes and workstations are all bound to AD with SSO turned on. I limited the servers 10.4.9 Server because with 10.4.11 Server I get AD issues. 10.4.9 is stable for us.
    I am forced to use Leopard as the new MacPros demand it
    My question - What should I do so the Leopard workstations (10.5.5) can get real Spotlight results from my share points?
    I have looked at the other Apple Support Boards and I don't get understand what they are talking about.
    Thanks in advance.

    I am an IT manager in a similar situation. However, I have shelled out the thousands to upgrade everything to the latest OS with my xserve running 10.5.5, and users running 10.5.5 or 10.5.6. Spotlight is totally useless. I have talked to tech "supportless" several times - no help. I have installed and reinstalled 10.5 on the server, reformatted drives, copied and deleted hundreds of gigs of data, done all kinds of terminal commands that were supposed to fix it, but it still just doesn't work. I wish Apple would stop coming out with new stuff for a while and fix this basic computer function. For now I use "Better Search". Better Search is Freeware from http://www.fornextsoft.com. Its ok - at least it finds stuff, but it is still not 100% accurate sometimes.

  • I lost my password and i could get into my phone, i tried but it said connect to itune. i did, but i did not get any result. please give me some advises how do i get my password back or reset with a new one?

    Ipjone6, silver, 64GB
    I lost my password and i could get into my phone, i tried but it said connect to itune. i did, but i did not get any result. please give me some advises how do i get my password back or reset with a new one?

    how to reset password:
    https://iforgot.apple.com/password/verify/appleid

  • Having problem with UDF, getting unwanted result Ljava.lang.String;@25c560

    Hi,
    This is atually a follow-up to other post in the same forum: <b>Sending XMl message as text (Mail body) by receiver mail adapter</b>
    We are having problem with UDF to get correct output.
    We are getting <b>result of UDF</b> as below:
    [[Ljava.lang.String;@f37573 [Ljava.lang.String;@1a409ed [Ljava.lang.String;@87c011 [Ljava.lang.String;@52a077 [Ljava.lang.String;@a4e8e5<BR>[Ljava.lang.String;@f37573 [Ljava.lang.String;@1a409ed [Ljava.lang.String;@87c011 [Ljava.lang.String;@52a077 [Ljava.lang.String;@a4e8e5<BR>[Ljava.lang.String;@f37573 [Ljava.lang.String;@1a409ed [Ljava.lang.String;@87c011 [Ljava.lang.String;@52a077 [Ljava.lang.String;@a4e8e5<BR>[Ljava.lang.String;@f37573 [Ljava.lang.String;@1a409ed [Ljava.lang.String;@87c011 [Ljava.lang.String;@52a077 [Ljava.lang.String;@a4e8e5<BR>]
    Does any body know what it mean?
    Following are the source ans target XSD's:
    Here is the <b>source xsd:</b>
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://NameSpace" targetNamespace="NameSpace">
    <xsd:complexType name="row">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    5e090470385011db9654000e7f22e9d4
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:sequence>
    <xsd:element name="DeliveryNumber">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0a0377b11db91dbf237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="10" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="DeliveryLineItem">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0a1377b11db98aaf237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="6" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="OrderNumber">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0a2377b11dbc5c4f237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="10" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="OrderLineItem">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0a3377b11db9d84f237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="6" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="BillToID">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0a4377b11dbb49bf237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="17" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="BillToName">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0a5377b11dbb38ff237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="40" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="ShipToID">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0a6377b11db9370f237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="17" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="ShipToName">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0a7377b11dbb66cf237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="40" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="ProductCode">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0a8377b11db8f94f237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="18" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="ProductDesc">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0a9377b11db929ff237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="40" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="ScheduledLoadDate">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0aa377b11db8d1df237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="8" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="ScheduledLoadTime">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0ab377b11dba57ff237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="6" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="Carrier">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0ac377b11dbcc03f237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="40" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="CustomerPO">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0ad377b11dbb5a2f237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="35" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="OutYard">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0ae377b11dbcc51f237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="16" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="OrderedQty">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0af377b11dbbe6cf237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="15" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="OrderUofM">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0b0377b11db9264f237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="3" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="LabConc">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0b1377b11dbb0e7f237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="50" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="GrossMT">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0b2377b11db99f1f237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="4" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="GrossST">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0b3377b11db9b6ff237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="4" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="BilledQty">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0b4377b11db8a9af237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="8" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    <xsd:element name="Status">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    9d3ac0b5377b11dba39cf237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:simpleType>
    <xsd:restriction base="xsd:string">
    <xsd:length value="10" />
    </xsd:restriction>
    </xsd:simpleType>
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    <xsd:complexType name="resultset">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    5e044980385011dbb2d3000e7f22e9d4
    </xsd:appinfo>
    </xsd:annotation>
    <xsd:sequence>
    <xsd:element name="row" type="row" maxOccurs="unbounded">
    <xsd:annotation>
    <xsd:appinfo source="http://sap.com/xi/TextID">
    c1cb8fd0377b11db912af237ac102206
    </xsd:appinfo>
    </xsd:annotation>
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:schema>
    <b>Target xsd:</b>
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/XI/Mail/30" targetNamespace="http://sap.com/xi/XI/Mail/30">
    <xsd:element name="Mail">
    <xsd:annotation>
    <xsd:documentation>
    Mail package for XI - Mail Adapter
    </xsd:documentation>
    </xsd:annotation>
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="Subject" type="xsd:string" minOccurs="0" />
    <xsd:element name="From" type="xsd:string" minOccurs="0" />
    <xsd:element name="To" type="xsd:string" minOccurs="0" />
    <xsd:element name="Reply_To" type="xsd:string" minOccurs="0" />
    <xsd:element name="Content_Type" type="xsd:string" minOccurs="0" />
    <xsd:element name="Date" type="xsd:dateTime" minOccurs="0" />
    <xsd:element name="Message_ID" type="xsd:string" minOccurs="0" />
    <xsd:element name="X_Mailer" type="xsd:string" minOccurs="0" />
    <xsd:element name="Content" minOccurs="0" maxOccurs="unbounded">
    <xsd:annotation>
    <xsd:documentation>
    any type
    </xsd:documentation>
    </xsd:annotation>
    </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="encoding" type="xsd:string" />
    </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    And <b>following is the UDF we are using</b>:
      =========================================
    String mailBody = new String();
    int inta, intb, intc, intd, inte;
    inta = a.length;
    intb = b.length;
    intc = c.length;
    intd = d.length;
    inte = e.length;
    for(int i = 0;  i < a.length; i++)
      mailBody = mailBody + a + " " + b + " " + c + " " + d + " " + e + "<BR>";
    result.addValue(mailBody);
    ====================================
    <b>Any help to resolve this would be very helpful.</b>
    Thanx
    Sue

    Hi Bhavesh,
    We are getting following error if we use the UDF you given below:
    Check Result for Object test   Source code has syntax error:  D:/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapf2026120390a11db9d1f000e7f22e9d4/source/com/sap/xi/tf/_test_.java:75: a is already defined in testUDF$(java.lang.String[],java.lang.String[],java.lang.String[],java.lang.String[],java.lang.String[],com.sap.aii.mappingtool.tf3.rt.ResultList,com.sap.aii.mappingtool.tf3.rt.Container) int a = a.length(); ^ D:/usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapf2026120390a11db9d1f000e7f22e9d4/source/com/sap/xi/tf/_test_.java:75: int cannot be dereferenced int a = a.length(); ^
    We have no knowledge of java at all.
    We did some modifications to it as below:
    String mailBody = new String();
    int a = a.length();
    int b = b.length();
    int c = c.length();
    int d = d.length();
    int e = e.length();
    for(int i = 0; i < a.length(); i++)
    mailBody = mailBody + a + " " + b + " " + c + " " + d + " " + e + "<BR>";
    result.addValue(mailBody);
    It it didn't work. Think we are missing something. Can please help us to figure it out.
    Thanx
    Sue

  • How to get the result set in batches

    I have a query which results into large data. This data i want to display in a group of 20. After every 20 records i want to add header and footer to it.
    Is it possible to get the result set data into batch of 20 ? means can i specify start and end index of query ?
    regards
    Manisha

    What I am saying is that a big query with lots of
    joins will probably be slow, and as such would be a
    ripe candidate for batching the responses, if it were
    not possible to speed/optimize it. Batching is nice
    to look at for the user, but is not a solution for
    performance problems. In essence it is irrelevant
    that it adds a little performance deficit, as it
    appears to be running a lot quicker, and gives more
    feedback to the user.Then let me say it again....
    - "Join" is a term that applies to a method of doing queries in the database....
    - Query 1 which uses a join and returns 15 rows
    - Query 2 which does not use a join and returns 1500 rows.
    Given the above then Query 1 will provide better overall performance for the system than Query 2 in a properly configured database.
    If it doesn't then the database is not set up correctly.
    And again this will be irrespective of whether the query is scrollable or not.

  • How to get the result of a method on a page

    I use JDeveloper 11g
    I want the result of a method (String) in the ApplicationModule on a page (jspx)
    What I have done is:
    1. make a method (getValue) in the ApplicationModule Algemeen (also in Client interface)
    2. make a pagedef-file with executables and bindings, see
    <executables>
    <invokeAction id="doGetValue" Binds="getValue"
    Refresh="renderModel"/>
    <variableIterator id="variables" Refresh="renderModel">
    <variable Type="java.lang.String" Name="getValueReturn"
    IsQueriable="false" IsUpdateable="0"
    DefaultValue="${bindings.getValue.result}"/>
    </variableIterator>
    </executables>
    <bindings>
    <methodAction id="getValue" RequiresUpdateModel="true"
    Action="invokeMethod" MethodName="getValue"
    IsViewObjectMethod="false" DataControl="AlgemeenDataControl"
    InstanceName="AlgemeenDataControl.dataProvider"
    ReturnName="AlgemeenDataControl.methodResults.getValue_AlgemeenDataControl_dataProvider_getValue_result"/>
    <attributeValues IterBinding="variables" id="ValueReturn">
    <AttrNames>
    <Item Value="getValueReturn"/>
    </AttrNames>
    </attributeValues>
    </bindings>
    3. on the page (jspx) I have an outputText-component:
    <h:outputText value="#{bindings.ValueReturn.inputValue}"/>
    But, it does not work, I don't get the result of the method on the screen.
    Who can help me with this?

    Hi,
    Simple example below:
    Suppose you have this method in AppmoduleImpl:
    public void testHello( ) {
    return "Hello";
    1.After you expose this to clientInterface,drop this method on the jspx page as ADF Parameter
    form
    2.Drop the return String as outputText
    3.Run the page,click on the commandButton & the outputText returns 'Hello'
    Regards,
    Shantala

Maybe you are looking for