Confused! LaCie FireWire 800 PC Card

Greetings!
I purchased an Iomega 250 GB external hard drive. Because my notebook doesn't have an 800 Mbps port I also purchased a LaCie FireWire 800 PC card. I was aleady to hook all of this up today, when I discovered that the LaCie card has 2 FireWire 800 bilingual ports compatible with FireWire 400/1394a products. It also has 1 FireWire 400 6-pin port. The Iomega ext. hard drive has 2 FireWire 800 (1394b) ports and 1 FireWire 400 port and a USB 2.0 port.
Does a "bilingual" port on the LaCie mean that both a 1394a and a 1394b cable will work in the same port? If not, then how do you get the LaCie FireWire 800 PC card to work at 800Mbps?
Thank you in advance!!!
tenntooter (back again after a long time out of town.)

The information provided was helpful. I purchased the iomega external hard drive and an Lacie card, but I haven't been able to get these working properly. I only worked on this for a short time though, and I now have time to work on this some more. I'm sure that I've overlooked something. I'll get it to work I'm certain.
Thank you!

Similar Messages

Is my Firewire 800 PCI card fried?

A couple of days ago my G4 with Sonnet dual 1.8 Ghz processors woke up. There was an immediate warning on my screen in five languages that something bad had happened. I rebooted and all was OK, except my G-RAID 320 gig wouldn't mount. I had it connected via Firewire 800. There was nothing I could do to get it on my desktop, including swapping cables. It shows up fine if I connect via Firewire 400.
I just tried it again after installing Leopard, and it still won't mount via FW 800. My thoughts are that my LaCie FW 800 PCI card is blown and I'll need to replace it. Any other ideas?

Hi! Try resetting the pmu. Press the button once with all external cables unhooked. Tom
Here's an example of the button location.
QS/DA
[IMG]http://img140.imageshack.us/img140/6197/qsdalogicbdjn7.jpg[/IMG]
FW800
[IMG]http://img49.imageshack.us/img49/3729/fw800logicbd4xu.jpg[/IMG]
Sawtooth
[IMG]http://img96.imageshack.us/img96/5706/sawtoothlogicbd2yu.jpg[/IMG]
MDD
[IMG]http://img470.imageshack.us/img470/1623/mddlogicbd4ga.jpg[/IMG]

Lacie firewire 800 and powerbook

I am having trouble tranferring Final Cut Express and iMovie files over to my LaCie firewire 800 250GB Extreme. I get an error -50. Any idea what is wrong? It seems to only be those files.
thanks

David, yep that's the exact drive I was looking at!
So you chain two of 'em together with FW 800?
"Uses the ExpressCard/34 flash card slot for ingesting."
I presume you mean the new SxS cards go in the ExpressCard slot? I was aware that was the case, which is cool!
Will that FW800 connection be quick enough to edit from? It is with my current DV workflow, but with HD content?

When I plug in my Lacie Firewire 800 drive it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?

When I plug in my Lacie Firewire 800 drive into my Mid-2009 Macbook Pro running Mountain Lion - 10.8.2, it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?
I've restarted, verfied the disk, repaired permissions, smc reset.. don't know what else to do..

Contact Lacie since it's their product you are having issues with.

Lacie FW 800 PCMCIA card low speed in Vista

I have a Lacie FW 800 pcmcia card - whith on my old Toshiba Qosmio would give me read speeds of greater than 50Mb per seconds. Now with my lovely new Satellite and Vista it barely reads @ 7Mbs and writes at a pathetic 2Mbs. Any idea's before I get rid of Vista as a waste of time.
Dermot

Hi
Well, its not easy to say if its a PCMCIA slot issue or Vista issue.
But I have noticed that some users have had a slow PCMCIA performance with Vista on different notebooks series. So I tending to say its a Visa issue.
But it would also very interesting to know the performance with XP and then to compare the both results.

Lacie firewire 800 external hard drive not mounting in mac os 10.4.8

I have a pm g5 Dual 2ghz system ,i have connected an firewire 800 lacie 1tb external hard drive to the system,now the problem is it is not mounting on the desktop shows in the diskutility repaired the disk say's disk volume ok any way to mount the external hd on the desktop

Hi Veena, Welcome to Apple Discussions.
And you've tried choosing the volume and pressing the "Mount " icon on the tool bar of Disk Utility?
Have you shut down your Mac and disconnected your firewire cable from both ends and let it sit about ten minutes then reconnect and try. Also, it is important to disconnect the AC power to your Mac, this helps to reset the FireWire port(s).
Do you have TTP or DW, both of which you could use to try to mount it.
It is also possible that you have a bad cable or a bad port, do other FW devices work?
-mj
[email protected]

Daisy chaining two Lacie Firewire 800 drives on a G%

I've had one external drive working perfectly for months. Tried to daisy chain a second drive and can't get the second drive to register on my desktop. Support said to reboot. My system freezes upon shutting down. If I restart with the two connected, neither drives shows and my Eye TV shuts down. As soon as I disconnect the second drive, Eye TV works and the one drive appears. Any suggestions? Apple Care had none except purchasing a port that would handle firewire 800. How trustworthy would that be?

I've tried daisychaining a new d2 Big Disk Extreme FW800 and a d2 FW800 drive on my G5's FW 800 bus. I can't copy files from one drive to the other without an Error -36 code. I CAN copy to and from the drives to the Mac at nice fast speeds with no errors. Both LaCie drives are updated to their latest firmware, respectively.
The few times that I was able to copy a small folder from the d2 to the Big Disk, it took forever.
As a result of this thread, I'm now awaiting the delivery of a Belkin FW800 3 port hub. I hope this will clear up this issue, as I need to be able to move data between the two drives (both of which passed their tests via Disk Utility, Drive Genius, and DiskWarrior in flying colors).
I have noticed the older d2 FW800 has a lower firmware number than the Big Disk, however, the LaCie Update Tool reports that each drive is at its current appropriate firmware number. And yes, I ran the Update Tool independently on each drive, while the other was unmounted and unplugged.
Any advice?

OS X 10.6.8 incompatibility with Firewire 800 or LaCie Firewire 800?

Somewhere along the line my MAC OS X running version 10.6.8 stopped supporting Firewire 800. When I connect my LaCie remote disks the MAC seems not to see them. Since I have two separate LaCie disks and have tried several cables, I think I can eliminate LaCie and the cable as being the problem. I am up-to-date on LaCie's downloads. Does Apple have a fix for this?

Reinstall:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
You also might try Intel-based Macs: Resetting the System Management Controller (SMC). Or you can take it in for service in case it's a hardware issue.

My LaCie Firewire 800 hard drive, connected to my Macbook Pro via Thunderbolt Cinema Display port, disconnects after sleep

I have a LaCie RAID Quadra hard drive (two disks in a case set to a redundant array) which for all intents and purporses appears as a normal hard drive to my mac.
When connected directly via FW800 to my Macbook Pro (2011, with thunderbolt port), it works perfectly.
For the sake of convenience, and since I am using it only at home as my Time Machine drive, I connected it to the FW800 port on my Thunderbolt Cinema Display. The display works perfectly in every way up until now.
When connected, the drive works great. However, when I put the machine to sleep, upon awakening it, I receive the "Disk improperly ejected" error immediately upon the screen coming up.
The drive is set to Auto mode which has always worked fine in the past; putting the drive to sleep when the computer is asleep, etc.
So, I only receive the disk ejected error when it's plugged into the Cinema Display; not when directly plugged into the MBP.
I have the 1.1 firmware update applied to the monitor.
Any ideas? I appreciate it.

{quote}
My desktop has two FireWire ports. In the first one I had my webcam plugged in. In the second one, the External Hard Drive. I unplugged the camera and used the first port for my External HDrive and now it works! So it seems the problem is a hardware problem with the port.
I'd check to see if the problem returns when you plug the camera back into the second port, or if the drive works in the original port when the camera is not connected.
Edit: Maybe you unplugged the problem, when you unplugged the camera?
Message was edited by: dechamp

LaCie Firewire 800 expresscard 34 - not working

Just received this card. Not working well.
- My Mac completely freezed 3 times in 10 minutes (by inserting the card in the Mac or inserting a cable in the card)
- It did not allow me (when not freezing...) my external Firewire Canopus card. Same for my external Firewire audio card.
- Surpringly, worked OK to detect my external Firewire disk drive.
Anyone had problems like this?

Hey don't know if you ever sorted out your problems ad after tht response about "no help for 3rd party blah blah" you've probably stopped using this site.
Firstly if you have a 3rd party anything that you're using with a mac - you're in the correct place on this disscussions forum.
Good Luck sorting your problem and to the unhelpful troll that responded to you "get a pc mate" you're on the wrong team.

Firewire 800 express card 34

I'm finding it impossible to purchase one of these cards in the UK
Anyone had any luck? products to avoid? compatibility issues?
Would be very grateful
S

Buy one on eBay and ask the seller if they ship it UK.

Experience with Iomega 250GB Ext Drive & Lacie PCMCIA to Firewire 800?

Hi!
I bought an Iomega 250GB Ext. Hard Drive and I'm contemplating buying a Lacie PCMCIA to Firewire 800 PC card for my PowerBook G4 (the G4 is older and does not have built in Firewire 800 capability.) Has anyone had experience with this configuration? I'd like to know if there have been any problems trying to go with this configuration before I buy the Lacie card. If there are problems with this set-up then my best choice it appears would be to use the Firewire 400 port on the laptop and on the ext. drive. (There is also USB 1.1/2.0 capability.) Anyone with experience in this area please advise.
Thank you!
tenntooter

Hi t,
I haven't had experience with this setup, but ran across this test sometime ago. They tested the LaCie card you're looking at with a Ti 800MHz with no issues.
(There is also USB 1.1/2.0 capability.)
Take my word for it, you don't want to use USB1 (major slow) and to use USB2, you'd need to buy a PCMCIA card to USB2 adapter anyway. Even then, in real-world transfers, FW400 is faster than USB2, so if your FW port is working, there's no reason to go the USB2 route.

Sonnet Firewire 800 Expresscard/34

The Sonnet firewire 800 express card doesn't work with latest mac os 10.5.2 update, I try also on another macbook pro (same hardware config.) with 10.5.0 and doesn't work either. I think problems are Mac os X 10.5.x drivers, because the system mount the card and in System profiler I can see the PCI Express line 3/4 hosting the firewire controller and PCI controller, but plugging any hardisk resoult in nothing mounted on desktop. The card is ok tested on a Windows laptop.
Does anyone know a solution?
Thanks

Hi All,
I solved the problems with Sonnet's FW800 card on my own MacBook Pro/10.5.2 system so wanted to post here for the benefit of others using 10.5.x and the Sonnet card. There are at least two potential sources of the problem:
1) From Sonnet tech support -- Try this trick and see if it helps:
Delete and empty trash for the three (3) following files and directories:
/System/Library/Extensions.mkext (a file)
/System/Library/Caches/com.apple.kernelcaches (a directory)
/System/Library/Caches/com.apple.romextensions (a directory)
The last directory might not exist so don't worry about it if it isn't there. Restart after you do this so OS X will rebuild some of the files.
2) TCP/IP networking -- simply disable it (Off rather than DHCP or Manual) on one or both of your Firewire interfaces in System Prefs/Networking. This is what made things start working for me on my own system.
Good luck!
OS X can get confused if you add in peripheral cards that are duplicating function that exists already. The above often cures that problem.

Firewire 800 PIC ards

After much searching I Receieved this message from LaCie
"Thank you for contacting LaCie Technical Support. This device was
designed for PCI-X slots. It will work with a regular PCI slot, but this
does not seem to affect you."
he device being Laci Firewire 800 3 port PCI card.
I hope this may help peaple with simillar apprehensions as mine
Power Mac Dual 2.5 Mac OS X (10.4) PCI-X expansion slots

Nice note for everyone's benefit.
My LaCie FW800 PCI card is working beautifully in my G5...has since day one.

SATA II verses Firewire 800 External Hard Drive

I want to add a 500MB external disk to a 866MHz G4. I have bought LaCie products before and had no problems so I was looking at their offerings.
The two main choices I see are:
A. 500GB Big Disk that supports Firewire 800 + Firewire 800 PCI card.
Issues
1. I can connect the disk to my iBook using Firewire 400
2. If I got a new Mac it will probably come with Firewire 800 so can be used.
3. Available now.
B. 500GB Two Big disk (shipping 2/1) that supports SATA II and comes with a SATA II PCI card.
Issues
1. Better access speed (looks like 115MB/s v 75-80MB/s)
2. The SATA II card will not work in a new Mac as it is PCI/PCIX and not PCI Express.
3. Cannot connect to my iBook.
3. Shipping 2/1.
The price difference is only $30 more for the SATA II.
I am trying to figure out if the improved performance of the SATA II drive will be significant enough to be the deciding factor. Or is the performance difference not going to be that noticeable and the convenience of Firewire would be a better choice.
Any experiences/thoughts?
Thanks,
-Tony
866 G4 Mac OS X (10.4.4)

Thanks for all the info:-)
Both the LaCie external drives I was looking at are stripped RAIDs with two 250GB drives.
The Firewire 800 drive also has a Firewire 400 and USB 2.0 port so I am assuming that means I can use a standard Firewire 400 cable.
The LaCie SATA II card comes with the drive, has multiple ports and does claim to support booting.
I will check on the deep sleep issue with regards to the LaCie 800 card.
If I were to get a new Mac I would probably replace the desktop machine. I wondered if Apple would adopt SATA II in place of Firewire 800. I seemed to be getting the impression that Firewire 800 has not been very popular but external SATA drives are getting more popular. Plus SATA II seemes to offer better performance than Firewire 800.
I was intending to use the drive for video editing DV material using FinalCut Pro so disk performance may be more noticeable. That is why I was looking at striped RAID drives.
-Tony

Confused! LaCie FireWire 800 PC Card

Similar Messages

Maybe you are looking for