Confused, need help regarding a MPG audio file

I have some video and the sound is not that good however I used my Marantz recorder using a CF card. The quality if very good on the card. The file is 1003.MPG around 250 MB. I have imported my video into Imovie and I thought I could just drag or import this MPG file into the audio and edit. It starts off like it will import and then nothing. I even imported the 1003.MPG file into Itunes hoping I could bring it in through Itunes. No luck. I am not sure what an MPG files but it doesn't appear to be an audio file that I need to import into I movie. When I double click on the file it opens in QT and I can play it there. What am I missing and what do I need to do in order to get it into Imovie so I can match up with video.
Thanks
Bob

Hi SDillini. I looked at your link and saw all the options I should have had. For some reason I have not been able to figure out as of yet it only gave me the two which I listed above. If I would have had all the options which were listed I would have been on easy street. I finally got it converted over, thanks to my son but now I have even a bigger problem. Worked on some video for about 7 hours and Imovie started just shutting down every so often. I would continue to save every 5 minutes. Now the last time it quit I tried to open and the clips showed up but nothing in the timeline. It looks like it wants to start however I get the spinning ball and after about 3 or 4 minutes it just shuts down. I have tried to put all the folders linked with that movie into a new Imovie project and I also tried to to import everything in to FCP. All I get is the clips I was not going to use with nothing I have edited going into the timeline or clip file. This has been a very difficult project and due tomorrow. If I can't figure this out fast I will start all over today and make an all nighter out of it. I may try a new post to possibly get some help on new problem.
Thanks for the info.
Bob

Similar Messages

  • Need help regarding 5.1 audio on sblive va

    dear users,
    i m tight on budget thats y cant afford the audigy series or any new hifi cards.. i need help in activating 5. audio on my sbli've value card though old but i always love it.. theres a feature li've surround and when i activate it my surround mixer shows fi've speakers and sound comes from 4 speakers i wonder how can i connect the 5th speaker.. 2ndly there r two analog outputs on the card which connects front two and rear two speakers theres another spdif output now is that to connect 5th speaker? also plz guide me about the spdif cable which will connect with sbli've value cards and how can i get its output from ? i m really amauter in this stuff plz guide and help me thanks
    regards
    muddassar

    Muddassar,
    The SB Li've Value is only a 4/4. speaker system card and that does not support a 5. speaker as you would not have the available jack for such connection.
    Jason

  • Need HELP regarding installinfg CR2008/Visual Advantage

    I need help regarding installing CR2008/Visual Advantage. I had the evaluation copy of cr2008. My compnay purchased the CR2008 Visual Advantage. Upon calling your customer service, I was told that I had to UN-install the CR2008 evaluation copy then install the CR2008. I did the unstall HOWEVER, when I try to install the CR2008 that we purchased, i get the following error..HR
    HR -2147024770-"c:\program files\business objects enterprise 12.0\win32_x86\REPORTCONVTOOL.DLL FAILED TO REGISTER"..
    I get more that just that one...I have received this before and based upon this formum, i have delted the regristry in the following using regedit.exe
    HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECT ;
    HKEY_CURRENT_USER\SOFTWARE\BUSINESS OBJECTS..
    Afeter i deleted the keys, I re-boot my pc and try to install the coftware again...BUT I GET THE SAME ERRORS...I have tryied this several times....what am i missing/not doing correctly

    Hi Shamish
    Actually you were on the right track, i think you just have to increase PSAPTEMP a bit and you will be fine. 358 MB seems just too small, i suggest you increase it to at least 2GB.
    1. what will be the difference in use of PSAPUNDO and PSAPTEMP while copy is running. ( i.e. what will be entered in PSAPUNDO and what will be filled in PSAPTEMP.)
    PSAPTEMP: is needed for large sort operations, as mentioned when you have a select with an ORDER BY clause, or if you do join two tables. During the client copy some sorting might be needed for special tables (cluster tables) where data is stored sorted.
    PSAPUNDO: undo space is only needed for DML (data manipulation), if data is changed undo is generated. This obviously is heavily the case during a client copy.
    2. the target client already has a copy taken 1 month before. so I think while importing it first delete existing data and then copies the new one.
    So If I first delete the target client and then take import on it; will it have advantage in regards of getiing UNDO or TEMP segments getting filled ?
    Deleting the client first might help for the undo problem, but you already solved that. I cannot imagine, it will help for the PSAPTEMP issue. As i said i would just increase PSAPTEMP and restart the copy.
    One more add: if you are doing the client copy with parallel processes, this will influence your requirements on temp and undo space, because of the concurrently running processes.
    Best regards
    Michael

  • I need help regarding installation of Netweaver 2004s

    Hi,
    I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
    " SAPinst is getting started.
    Please be patient ...
    starting gui server process:
      sapinstport: 21200
      guiport    : 21212
      guistart   : true
      command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
    load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
    guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
    guiengine: login in process...............................
    guiengine: login timeout; the client was unable to establish a valid connection
    Exit status of child: 1"
    Regards,
    Farooq Shaik.

    Hi
    Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

  • Captivate 7: Need help to diagnose background audio which increases suddenly mid-video.

    http://www.youtube.com/watch?v=6hQ1GJpVQNU
    I inserted a music file into the video background.  At 1:39 you'll hear the background music suddenly jump up in volume. 
    When I imported the audio file to the background, I edited it by adjusting the volume.  The volume was reduced appropriately in the preview, however, as you can hear, it jumps significantly.  There is nothing I can see either in the audio file - or in the other elements that may cause this.
    I've tried deleting and re-importing and changing the volume using the  threshhold/ ratio settings (versus just the volume bar), but nothing changes that jump. 
    Any help is appreciated!

    Thanks for considering the problem! Unfortunately, as I stated above, the voiceover needs to be a background audio file that plays throughout the project. It's not possible to record audio-per-slide because of the structure of the video - and because I do a lot of editing of the audio files for 8-minute videos.
    FYI - I was able to have a chat conversation with a support tech. Here is the transcript of that chat:
    Anvinder: We have not tested the workflow of captivate 7 with yosemite so far.
    Anvinder: You might find some inconsistencies.
    AMANDA: So, is there no solution to this error?
    AMANDA: Do I need to publish the entire project every single time I make a small change?
    AMANDA: Has Captivate 8 shown this error in Yosemite?
    Anvinder: In order to make the changes evident in the output  you need to publish the whole output.
    Anvinder: Amanda, the best practice is to publish the whole project.We are in testing phase for the same. You can download the trial version of captivate 8 and work on it on yosemite.
    If you have a suggestion for a better workflow for creating tutorial videos (ultimately published to YouTube) that need to include the following, please share!
    a voiceover
    heavily animated explanations of concepts
    live screen capture of business processes in software
    Thanks!

  • I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.

    I need help regarding measurement of "time domain parameters of Heart rate variability" using labview.
    I am using Labview 8 ... I  need to develop a software to accquire the ECG data (simulated enironment ) and compute the time domain parameters of Heart rate variability like "SDNN, SDANN...etc". Can some 1 plllzzzz help me out.Plzz help me if u can.Thanx in advance.

    Hi Andy,
      Thanx for responding.  The input is from a text file. SDNN, SDANN,etc are  the timedomain parameters of heart rate variability.
     SDNN: the standard deviation of the NN or RR interval  i.e. the square root of variance.
    SDANN:the standard deviation of the averageNN interval calculated over short periods, usually 5 min,which is an estimate of the changes in heart rate due tocycles longer than 5 min
    SDNN index, the meanof the 5-min standard deviation of the NN intervalcalculated over 24 h,
     RMSSD: the square root ofthe mean squared differences of successive NN intervals
    NN50: the number of interval differences of successiveNN intervals greater than 50 ms, and
    pNN50 the proportionderived by dividing NN50 by the total numberof NN intervals.
    The problem is dat I am a fresher to the world of Labview. I have jus recently started working on it. Can u please suggest me some some idea as soon as possible.
      As i said  I have the ECG data in the form of text files..I need to create sort of GUI to calculate the time domain parmeters....I need help urgently. Plzzz help me if u can. If u have and .vi example to calculate the RR interval plzz send it to me ASAP.
    Thanku

  • I need help viewing password protected PDF files on my tablet

    I need help veiwing password protected PDF files on my tablet

    Any free apps available especially for this purpose?
    not that i know of. but i think _*Documents To Go*_ will be worth the expenditure.
    JGG
    edited by the Jolly Green Giant (where Green stands for environmentally friendly)

  • Need Help Regarding Enabling The Matrix

    Hi All,
    We have got one user form and we have got one choose from list and one matrix, on click of choose from list the value will be displayed in the text box and at the same time matrix should get enabled. But it;s not happening in our case. The value is coming in the text box through choose from list but matrix is not getting enabled. We are able to change the back ground color of the matrix, make first column invisible and all but not able to enable the matrix. We need help regarding this one.
    Regards,
    Jayanth

    Hey first bind the columns of matrix to any user datasource
    and then you can enter any thing into your matrix 
    following code may help
    suppose you have one column
    oForm = SBO_Application.Forms.Item("URFRM")
    oUserDataSource = oForm.DataSources.UserDataSources.Add("URDSName",
    SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 20)
    oMatrix=oForm.Item("URMATRX")
    oMatrix = oItem.Specific
    oColumns = oMatrix.Columns
    oColumn = oColumns.Item("URCOLName")
    oColumn.DataBind.SetBound(True, "", "URDSName")
    oMatrix.Addrow()
    hope this will help
    additionally you can look at this sample
    .....SAP\SAP Business One SDK\Samples\COM UI\VB.NET\06.MatrixAndDataSources

  • Need Help Regarding JAVA BEAN

    Is any one tell me that JAVA BEAN only used in WEB or also you in Desktop applications???? and aslo tell how i implement Java class and use JAVA BEAN. I need help regarding above matter
    thanks in advance
    Rehan MIrza

    Here is a good link that indicate that JavaBean is not only for applets
    http://java.sun.com/docs/books/tutorial/javabeans/whatis/beanDefinition.html
    quote:
    The JavaBeans API makes it possible to write component software in the Java programming language. Components are self-contained, reusable software units that can be visually composed into composite components, applets, applications, and servlets using visual application builder tools. JavaBean components are known as Beans.
    Francois

  • I need help regarding setting my mail accounts on macbook pro

    I need help regarding resetting my mail accounts on macbook pro

    What kind of accounts do you need to reset? IMAP or POP accounts using one of the many web-based messaging systems? An Exchange server account? Were they working and now just not working any longer?
    You're going to have to be a little more specific in what you need...
    Clinton

  • Need Help regarding text Output

    Dear gurus.
    I need help regarding formatting of a text.
    I want to format a employee sub group text.
    im getting a text workers (7) from a table t503t having field ptext.
    i want to show only (7) in the output not the whole text how can i do this ?
    Please help
    regards
    Saad.Nisar

    DATA: BEGIN OF itab_odoe OCCURS 0,
      department_text LIKE t527x-orgtx,"Holds the short text for department
      department_no LIKE pernr-orgeh,
      pernr LIKE pernr-pernr,
      ename LIKE pernr-ename,
      grade like t503t-ptext,   "THIS AREA GET ME TEXT OF EMPLOYEE SUBGROUP"
    *  department_text LIKE t527x-orgtx,"Holds the short text for department
      current_year LIKE sy-datum,
      wt0001 LIKE q0008-betrg,"Basic Pay
      wt1101 LIKE q0008-betrg," COLA
      wt3002 LIKE p0015-betrg,"Overtime
      per_basic type p DECIMALS 2,"Overtime percentage on basic
      per_basic_sum type p decimals 2,"Overtime Sum Division
      overtime_sum LIKE p0015-betrg,"holds sum of overtime
      basic_sum like q0008-betrg,"holds sum of basic
    END OF itab_odoe.
    Im using the select statement to get the employee subgroup from the table
    select single ptext
        from t503t
        into itab_odoe-grade
        where persk eq pernr-persk
        AND SPRSL eq 'EN'.
    now in itab_odoe-grade the values comes is Workers (7) , Snr Mgt (M3)
    i want to show only the text in Brackets.

  • I had to put my computer by together without migration or time machine I NEED help with order of the files?

    I had to put my computer by together without migration or time machine I NEED help with order of the files?

    Hi, where are these other files exactly?

  • Need help to share Number/Pages file visa Mail option. Cannot do with iPad Air (iOS7)

    Need help to share Number/Pages file visa Mail option. Cannot do with iPad Air

    Oh, okay. After selecting the format I want to send, it says "creating... ". Then irrespective of the format I choose the message e.g. "creating spreadsheet" disappears, and so does the choice window (where I earlier chose Mail). I am taken back to the Numbers (or Page) where I had started from. Diavonex's note indicated that after "creating ... " stage I should be taken to an option where I can type in email address where I want to  send the  file, if I want to copy it to another address etc. I cannot arrive at that page - no matter whether I am working with Pages or Number, or which format I choose for the file to share !
    I will try to close as you have suggested and try. However, I have switched on and off several times by now, but nothing changed!
    Will look forward to any ideas to solve this !!!
    Thanks much!
    Best

  • Need Help Regarding  ibook

    em user of   iphone  3gs  os 6.1.6
    Yesterday  i restore ma  iphone
    after that  em  Unable  to   install    ibook in  ma iphone  its  say me that u  need  os 7 ...
    need help regarding this issue....   what i do  is there any alternative app  ...?

    Hey Seungly,
    I've realized that my computer runs fine UNLESS I turn the AirPort on to connect to the Internet. The moment I click "Turn AirPort On," the "You need to restart your computer" screen immediately pops up. Is there any connection between AirPort and my problem?
    That could very easily be the case, a bad Airport card. Look at this recent post:
    http://discussions.apple.com/thread.jspa?messageID=7960754&#7960754
    John diagnosed it from the panic log.
    Does yours say something similar?
    Richard

  • Need help regarding image scanning from scanner and resizing it...

    Hi,
    I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!
    Thanks,
    Avinash.
    Edited by: Kalakonda on Jul 24, 2009 8:08 AM

    Kalakonda wrote:
    I need help regarding scanning of image directly from scanner. Here is the scenario when the person clicks scan button on the webpage should scan the image and resize it and store it in some temp location. Is there any way i can do this. Any Help regarding this would be great!!!So what you are doing is you have a Scanner (hardware: like an HP flatbed scanner) attached to a server that you want to use as a scanning station? Is this the senario that you are talking about?

Maybe you are looking for