Confused on how to start (opening FCE project in Livetype)

Sorry to sound completely clueless, but I watched the wonderful video tutorials at Livetypecentral.com, but there's no mention of exporting and importing. Before I start my Livetype project, do I import my FCE project into LiveType, or vice versa? I want to make sure I do this correctly.

do I import my FCE project into LiveType, or vice
versa?
You will create your Live Type project and save it.
Then you can import it directly into FCE for use in
your final cut express project.
Doug
But I was planning on having the text positioned in different places around cropped images of the movie. If I don't have the FCE movie on while I'm working with Live Type, how will I know exactly where to put the Live Type text?

Similar Messages

How do you open a project started in Muse, Dreamweaver, or other to tweak for different screen sizes

How do you open a project started in Muse, Dreamweaver, or other design program to tweak for different screen sizes?

Hi. As of now HTML import is not plan of record for Reflow 1.0. See this FAQ for a bit more info - http://forums.adobe.com/message/5071510#5071510.
-C

How can I open a project made in 2000 on Final Cut Pro to migrate it to a new version?

how can I open a project made in late 2000 on Final Cut Pro to migrate it to a new version to finish editing it? files, timeline and unfinished edit are all stored on hard drive since early 2001, with all the original miniDV tapes still in hand

Do you still have legacy FCP? If you not you need to find someone who will open the project in FCP6.0.6 or later. Export an XML file of the project. Use 7toX to convert it to an XML format that works with FCPX. Import the converted XML file to FCP.

How do I open a project in CS6 when it's apparently become too large (1.68 GB) to load?

I have a project that was recently sent back to me by someone who was working on the audio. When it was sent to me it was around 217 MB. After working on the project for a few more days before sending it out for color correction and additional audio work, I'm all of a sudden unable to load the project. My guess is that it has become too large to open, because now it is 1.68 GB. I don't know how that happened. I haven't applied any additional effects or brought in more media. All I've done is make trims to the picture and merged 3 sequences. I'm trying to figure out how I can open the project and, if I do need to make it smaller in order to continue working on it, is there a way to do so without losing the work that I've recently done? Thanks!

I'm trying to "import select sequences" from that project into a new project but it won't load. The loading bar is stopping about a quarter of the way through, same as it did when I recently tried to load the project normally. The loading bar has been sitting there at a quarter full for about 20 minutes now. A friend of mine tried to load the project (I sent him a zip file through Dropbox.) onto his computer yesterday and couldn't get it to open either.

Final cut X-- how do you open previous projects?

i must be missing something really basic. How do you open previous projects in Final Cut X? When I try to open one it hangs on "loading (nameofproject) into time line.

You need to provide more information. Are you seeing it within the FCP interface properly when you go to show the Project Library? If so, I would click on it to select it and then open the Inspection window and click on Modify Event References and select proceed from there. I'm assuming you have not moved the project from it's proper folder....

How I can Open a Project CS5 in CS3?

How I can Open a Project that was created in After Efects CS5 in After Efects CS3?
Any Pluging that upgrade to read New Files in Older Version ?
Thans For any Information.

Ok thank for the information.
So I have the project in a Folder, you mean open and star working with one single file?
I dont have any experence in the program so you can recomend me any tutorial for newbies, I want to learn to do my own Introduction to my videos
Thank

How can I open other projects?

I want to open projects, which ı download in planetsourcecode.com in netbeans or in Sun Java Studio Enterprise 8.1.
The problem is that open dialog of JSE or netbeans looks for a directory. And if I try to open the directory which I have downloaded, it doesnt open the project. I tried to do same with my project (made in netbeans) and there was a small sign bottom of the directory icon. And it opened project succesfully. How can I open other projects?

Probably best to firstly copy the media folder - you could Option/drag it to the desktop. Then open a new project and go File/Import that desktop folder.
Let us know if that works out for you.

Is it possible to open FCE projects in the latest version of FCPX?

Is it possible to open Final Cut Express 4 projects in the latest version of Final Cut Pro X (10.0.4)?
I have 18 projects on my hard drive, and I'm concecrned about their compaitibility in the future. Should I leave them as they are, and I'll be able to import them into Final Cut Pro X, or should I first convert them to Final Cut Pro 7 projects?

You can't open FCE projects in FCPX. If you can open a copy in FCP7 and export an XML file.

How can you open a project file backup if the main project won't load?

This has only started happening in the last couple of weeks. I'm on Logic 10.0.7, OSX 10.8.5. On one particular project, it will be loading seemingly normally, then it just disappears with no crash log, nothing.
Presumably there is some sort of corruption in the project file.
In the old pre package days, you would just go to the project file backups folder and pick a previous one. Bingo, you have only lost a little bit of work.
Now when I show package contents, the project file backups folder has project data files that won't open logic, and are invisible until you have logic open. Which I can't do.
Rue the day I selected the package option rather than folder.
Any suggestions?
Or to put the question another way, how can I convert the project data in the project file backups folder to a file that Logic can recognise and open?

Having his install the trial is the way to go. Working between AI versions is a pain and as you are finding out almost impossible with 5 versions between the collaborators.

How could I export FCE project into XML format?

Hello,
I recently decided to upgrade from Final Cut Express to Final Cut Pro X. But I don't seem to be able to export my FCE unfinish projects. That is because FCE does not export into XML format !!!
Does anyone knows how to have FCE to generate a XML file? Or to have the FCP file format converted into a XML file format?
Thanks

If you are editing in FCE4, then you can open your FCE Project in FCP6 or FCP7 and do the .xml export there. Once you have that .xml file, you need to use the software 7toX to convert the file to FCP-X.
http://assistedediting.intelligentassistance.com/7toX/
It should be noted that the conversion of a sequence file to .xml and then .xml to FCP-X may not pass 100% of the information.
There is information about what is and is not translated here:
http://assistedediting.intelligentassistance.com/7toX/about.html
MtD

How can i open Jbuilder project in Eclipse

Hi All
Can anyone tell me that how can i open Jbuilder 2006 project(.jpx)
in Eclipse 3.2.2
Regards

Hello, perhaps this will be helpful : http://www-128.ibm.com/developerworks/library/os-ecidea/.
*Edit - This link will be much more useful : http://www.bleb.org/software/jpx2eclipse/
Laginimianeb
Message was edited by:
laginimaineb

How to delete Open/WIP Projects/Network Orders/WBSes using program PSARCHP1

Hi,
We have multiple open or WIP projects/Network orders. Program PSARCHP1 is used for this purpose. Can anybody suggest how to delete all these projects/networks that are open/WIP.
Regards,
Rakesh Kumar

I think it's not possible to remove for the data base in sap. However you can delete the records for the tables which is not suggetable. which server do you want to do this??
if developement yes you can delete the table records.
As per my experiance we should not delete the table records because it's linked many tables and diff modules in sap.
I hope it's help ful.
give the points.
Regards,
Raman

How can I open a project that has been created with Mercury Playback Engine GPU Acceleration software, on my trial version of Premier Pro CC?

Hi,
I'm working with a colleague who is using Mercury Playback Engine GPU Acceleration software on his PC version of Premier Pro CC. I am using a mac and have a trial version of Premier Pro CC. When I try to open a project file that he has sent me I get an error message-
"Missing renderer: This project was last used with Mercury Playback Engine GPU Acceleration (CUDA), which is either not available or not certified on this system. Mercury Playback Engine Software Only will be used."
When I click OK and locate the files I get a message saying "File format not supported".
Can anyone tell me what to do so that we can share project files?
Many thanks,
Jessie

Shouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project?

Will FCP 5 open FCE projects?

I know I have seen the answer . . . I want to install FCP 5 but I have several on going FCE projects . . .
SHINER
THE BEST BEER IN TEXAS!

Thank you Steve . . .
Shiner

How to start a new project in SDK

Hi, I'm totally new in SDK and I need to make a project, plugin, on the Uni. Could somebody explain me please how to install the SDK? I downloaded the SDK, but there is now exe file, so I suppose I need to add these libraries to the new project in Visual Studio. I really have no idea how to do that, so let me beg you for your help. Can it be Visual Studio 2013, is newer than 2010 also ok? Pls help

Hi! As long as I know, you cannot install SDK. The best thing to do is to explore sample projects - and then modify them for your own purpose.
This introductory article is probably best start
http://www.mactech.com/articles/mactech/Vol.15/15.04/PhotoshopPlug-InsPart1/index.html
It is from 1999., some things changed, but the principle stayed same.
Also, sample projects contain a lot of comments, so the code can be comprehended relatively easily.
Best!

Confused on how to start (opening FCE project in Livetype)

Similar Messages

Maybe you are looking for