Confused on vid cards for new dv6t and dv7t quad core units

I've been looking at a new unit and HP is currently advertising the following grahics cards for the above mentioned units. That being:
1GB Discrete GDDR5 Graphics AMD Radeon(TM) [HDMI, VGA]
2GB Discrete GDDR5 Graphics AMD Radeon(TM) [HDMI, VGA]
+$75.00
I called customer support and also talked to tech suppurt and no one could tell me what these cards are......does anyone have anymore specific info on this vid cards? Thanks in advance!!!

If anyone else is having this issue I found this info on another site:
http://forum.notebookreview.com/hp-pavilion-notebooks/634581-hp-dv6-graphics-card-confusion-clear-up...

Similar Messages

Which Airport card for a Power Mac G5 Quad Core?

i think it's a late 2005 model (11,2). having difficulty finding the right airport card to connect to my wireless broadband network at home. bought a wireless USB adapter but this won't work. any ideas would be hugely appreciated! thanks.

how easy are these things to install?
No so much easy, or hard, just delicate.
These instructions are originally in German, but with translation, you should be able to install it:
Install Airport/BT DC G5
Original link:
http://www.macuser.de/forum/showthread.php?t=143115

I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?

I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
MAX says it recognizes all the cards in the chassiss.

Jeremy, Thanks for the reply.
I tried to set up the system as DAQmx.
I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
It didn't seem right that the system should behave that way, but I pressed onward.
I then tried to create a new DAQmx Task
When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
Analog>>Voltage
Analog>>Temperature
Ana
log>>Strain
Analog>>Current
Analog>>Resistance
Analog>>Frequency
Analog>>Custom Voltage with Excitation
Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
I had included the system report of what programs I am using, etc. as attached file nireport.txt
After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
Which I guess it is since both configurations are now set-up in MAX.
I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
't come up with
Analog input>>POSITION>>LVDT
When I try to create a new DAQmx task.
Thanks for the help so far! As you can probably tell I am new at this.
Ryan
Attachments:
nireport.txt ‏2 KB

How do I turn on my wireless keyboard and make it 'discoverable'? I got a message that the batteries were low, so I changed them for new ones and now the keyboard doesn't work.

I got a message saying that the batteries were low, so changed them for new ones and now the keyboard cannot be 'found'. There seems to be no way to turn it on and make it 'discoverable' to the system. At the moment I'm typing this on a spare keyboard plugged into the back of my mac via a USB. Please help!

Have you checked to make sure the batteries are inserted the correct way? Have you tried to turn it on by pushing the right upper (round) edge of the keyboard - if you do that, do you see a tiny little green light? Since you have a wired keyboard, can you get to the Bluetooth setup/preference pane so you can manually try to sync the keyboard?
PS - posting duplicate posts is not helpful - it makes things too confusing, so I've asked the hosts to remove your other (identical) post.

HT1689 Why is my money gone my sister just gave me a card for $25.00 and I loaded it on iTunes and it logged me out and my money's gone PLEASE HELP!!

hy is my money gone my sister just gave me a card for $25.00 and I loaded it on and I got out of my account and now the money's gone PLEASE HELP!?!

Sounds like either the Display or Graphics chip, that will not be cheap to fix. Because it is a 2006 and getting on in years, it might be best to move whatever you want to keep over to your newer iMac using Firewire Target Disk Mode and let it rest in peace.
see > How to use and troubleshoot FireWire target disk mode

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

Click here for options.
(58961)

TS1292 hi, I've got itunes music card for my birthday and when I scratch the back to redeem the code everything gone, so no code, what can I do?

hi, I've got itunes music card for my birthday and when I scratched the back to redeem the code everything gone, so no code, what can I do? I've been to tesco to customer service and they told to contact itunes support

These are user-to-user forums. If the page that you posted from doesn't help then you can try contacting iTunes Support via this page (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Try to force quit the mail app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works

Gift card for new school day

Hello Apple staff,
I bought a iPad mini retina display with a $50 gift card for new school day. I received the e-mail saying that the gift card has been sent. However, I have not really received any gift card code to redeem yet. So I'm here to ask help about the issue, please?
Thanks,

This is a user to user tech support forum. Apple is not here. Apple does not answer questions here. You need to call the store directly to get answers to your questions about a purchase that you have made in a store.

Can i use other credit card for my id and purchase

Can i use other credit card for my id and purchase

Your original question did not mention seeing billing info.
Here's how to contact iTunes Store Billing Support:
iTunes Store: Contacting billing support

HT6006 Hello, I have a charge on my Discover card for $116.86 and I do not know what it is for. Can I get more information on it please. The info in the statement is MHDBQJ1Z3G-0

Hello, I have a charge on my Discover card for $116.86 and I do not know what it is for. Can I get more information on it please. The info in the statement is MHDBQJ1Z3G-0

Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
If it's a charge though your iTunes Store account, it should be reflected in your Purchase History:
http://support.apple.com/kb/HT4098
If the charges are not reflected in the Purchase History, then it's most likely a fraudulent charge to your credit card directly or your credit card number has been stolen and used by someone else in another iTunes Store account rather than an unauthorized purchase through your account. In either case it will be up to your bank to handle.
Regards.

HT201209 We have a gift card for iTunes that was purchased in the United States and we live in Canada and iTunes won't allow us to redeem it. Is there any way we can exchange it?

We have a gift card for iTunes that was purchased in the United States and we live in Canada and iTunes won't allow us to redeem it. Is there any way we can exchange it?

Sorry, but as KP guessed, Apple will not exchange the card, and you are correct that you can't use a US iTunes card in Canada. You will need to give or sell it to someone in the US.
Regards.

Create Separate Views for New,Edit and Display forms in Infopath

Hi,
I need to create a separate views for New, Edit and Display forms in infopath.
For ex : I need a Submit Button on Display form and not in New/Edit forms.
I tried, but i amnot able to get the changes.
Regards, Shreyas R S

I just validated my approach in a 2013 farm, this is precisely how it's done!
Step 1) List > Display Form
Step 2) Change the View within the Web Part Properties. In your screenshot it looks like you simply went to View Item on the single item, which is not the direction I gave =P.
**Assuming you've already created the multiple views within InfoPath, this allows you to set them up as distinct defaults for New, Edit and Display, let's make that clear. If you are not even to the point of having separate views, that is just in InfoPath,
Page Design tab, far left, New View button

TS1292 i got a itunes card for a gift and i cant activate it

hi i got a 50 dollar itunes card for a gift and i cant reedeem the code and activate it

Normally you would go back to the store from which the card was purchased and get them to handle the problem, but since this was a gift, that's probably not possible. Go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store. You'll want to include the serial number of the card; see:
http://support.apple.com/kb/TS1292
Regards.

Purchased software download card for Adobe photoshopelements13 and adobepremiereelements13 at my campus bookstore on Friday morning Oct 31. Went through the process of entering product/serial numbers etc. and became "verified". Downloaded the product (~

Purchased software download card for Adobe photoshopelements13 and adobepremiereelements13 at my campus bookstore on Friday morning Oct 31. Went through the process of entering product/serial numbers etc. and became "verified". Downloaded the product (~2 hours in time), the proceeded to install. At this - THIS point I was "told" I needed the 64 bit version (I have a 64 bit Lenovo T431s laptop). My patience wearing thin... I returned to the Adobe site from which I had done everything to this point. NOTHING with regard to a choice of 32 or 64 bit! Looked closely at the info that came with the download card... again, nothing regarding 32 or 64 bit option. Outlined this matter to Identit-e customer service... they said I need to contact Adobe. Adobe site does not make it easy to do that. Anyone have a solution and/or a suggestion?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools

Confused on vid cards for new dv6t and dv7t quad core units

Similar Messages

Maybe you are looking for