Confused regarding v$session shows 'sys' in 'user' field for scott,

hi all,
new to oracle, little confused about why v$session view shows 'sys' in 'user' field for scott user connected, while user# shows id of scott and schema is also of scott is being used.
i am using oracle 9i on a rhel3, logged in(client: sqlplus, db user: scott) from the same os user 'oracle' used by sys on a standalone test machine.
regards,
rishi

why v$session view shows 'sys' in 'user' field for scott userPlease be more specific: There is no column »user« in v$session view. Are you actually refering to username column?

Similar Messages

Search help for user field for WBS element

Hi,
how can I add a search help to one of the user fields for WBS elements without modification? Is there an exit which I can use? I want to have a search help for field PRPS-USR02.
Thanks for your help.

Hi
Create an elementary serach help using the Table USR01 or USR03
see the steps
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
Regards
Anji

I did force shutdown on my MacBook Pro (2006 year, 15.4"), so, when I tried to boot, it shows apple logo (as usual) and shuts down. When I booting MacBook with Option key pressed it shows lock icon and field for password. Please help me.

I did force shutdown on my MacBook Pro (2006 year, 15.4"), so, when I tried to boot, it shows apple logo (as usual) and shuts down. When I booting MacBook with Option key pressed it shows lock icon and field for password. Please help me.

Wait for advice on repairing a damaged filesystem. Forceshutdown stops processs in mid-stream and leaves some parts not-valid.
Do not proceed until you get that avice.

How to manage sessions(IEnterpriseSession) across multiple users?

Assuming that we are going to have only one user for our web-app to access the BO-ReportServer.
Are we supposed to fetch the IEnterpriseSession, using the following code for every user who is trying to access the WEBI report using BO-SDK from a web application.
CrystalEnterprise.getSessionMgr().logon
Example:
When User_One, logs on to the webapp start a new HttpSession and then do a CrystalEnterprise.getSessionMgr().logon
When User_Two, logs on to the webapp start a new HttpSession and then do a CrystalEnterprise.getSessionMgr().logon
Questions:
1. Is this right approach
2. If yes, So does this keep going, considering if our webapp has around 500 concurrent users then will this be scalable
3. If no, then I wondering if the IEnterpriseSession will be threadsafe
Confusion:
Just confused if IEnterprise session is similiar to a datasource(for db connections which manages the connection pool) or is it more like HTTPSession, which is created for every individual user accessing the application.

Yes total users should be around 5000, but there could be around 500 users accessing concurrently. Besides we are using to BOE to show a dashboard, with charts and graphs(using the HTMLView) so we will have to 500 concurrent IEnterprise sessions. I just hope that:
1. Each session is unique(independent thread) although they have logged on using the same credentials
2. The CMS server can scale upto this number(500). Don't know if there are some caching options available?

How to specify RD USER cal for particular session host server on a licensing server.

Hello,
I have 25 user cal license which I want to deploy to my 5 session host servers (5 user cal for each host)
I got 1 licensing server, where I have installed these licenses and pointed all other servers to it.
but I dont see any option to reserve 5 for each host. (4 win 2008R2, 1 win 2003 separate to each other no session host)
Thanks

I would always have two licence servers for resilience.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
Blog: http://www.windows-support.co.uk
Twitter: LinkedIn:

User Exit for saving Invoice

Hi Experts,
My req, is I have to check billing date with order date/ delivery date while creating the invoice in VF01.
For that I have done codig in user exit RV60AFZZ, so it gives error ,but the billing date field get disable.
& this invoice no. alsp get created.
So can anybody plz tell me in which user exit i have to put my code ???
I have tried with RV60AFZC.But it is not working.
My code is
FORM userexit_pricing_prepare_tkomp.
* TKOMP-zzfield = xxxx-zzfield2.
* structure for vbak
TYPES:BEGIN OF ty_vbak,
      vbeln TYPE vbak-vbeln,
      audat TYPE vbak-audat,
      END OF ty_vbak.
*likp structure
TYPES:BEGIN OF ty_likp,
      vbeln TYPE likp-vbeln,
      lfdat TYPE likp-lfdat,
      END OF ty_likp.
*vbrp structure
TYPES:BEGIN OF ty_vbrp,
      vgbel TYPE vbrp-vgbel,
      vgpos TYPE vbrp-vgpos,
      aubel TYPE vbrp-aubel,
      aupos TYPE vbrp-aupos,
      END OF ty_vbrp.
DATA:it_vbak TYPE STANDARD TABLE OF ty_vbak,
     it_likp TYPE STANDARD TABLE OF ty_likp,
     it_vbrp TYPE STANDARD TABLE OF ty_vbrp.
DATA:wa_vbak TYPE ty_vbak,
     wa_likp TYPE ty_likp,
     wa_vbrp TYPE ty_vbrp.
***** take reference document no & delivery no. *****
LOOP AT xvbrp.
wa_vbrp-vgbel = xvbrp-vgbel.
wa_vbrp-vgpos = xvbrp-vgpos.
wa_vbrp-aubel = xvbrp-aubel.
wa_vbrp-aupos = xvbrp-aupos.
APPEND wa_vbrp TO it_vbrp.
ENDLOOP.
IF it_vbrp IS NOT INITIAL.
SELECT vbeln audat FROM vbak
      INTO TABLE it_vbak
      FOR ALL ENTRIES IN it_vbrp
      WHERE vbeln = it_vbrp-aubel.
SELECT vbeln lfdat from likp
       INTO TABLE it_likp
       FOR ALL ENTRIES IN it_vbrp
       WHERE vbeln = it_vbrp-vgbel.
ENDIF.
**** check for invoice date with order date *****
LOOP AT it_vbak INTO wa_vbak.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_vbak-audat.
    MESSAGE 'Invoice Date is less than Order Date' TYPE 'E'.
ENDIF.
ENDLOOP.
**** check for invoice date with delievery date *****
LOOP AT it_likp INTO wa_likp.
IF xvbrk-fkdat IS NOT INITIAL AND xvbrk-fkdat < wa_likp-lfdat.
    MESSAGE 'Invoice Date is less than Delivery Date' TYPE 'E'.
ENDIF.
ENDLOOP.
ENDFORM.                    "USEREXIT_PRICING_PREPARE_TKOMP
Thanks & Regards,
Anagha Deshmukh

Hello,
These are the user exits for the tcode.
J_3RSINV            Export sales
SDVFX007            User exit: Billing plan during transfer to Accounting
SDVFX008            User exit: Processing of transfer structures SD-FI
SDVFX009            Billing doc. processing KIDONO (payment reference number)
SDVFX010            User exit item table for the customer lines
SDVFX011            Userexit for the komkcv- and kompcv-structures
V05I0001            User exits for billing index
V05N0001            User Exits for Printing Billing Docs. using POR Procedure
V60A0001            Customer functions in the billing document
V60P0001            Data provision for additional fields for display in lists
V61A0001            Customer enhancement: Pricing
Keep the break point and try in the debugging in each and every exit and see which user exit is triggred.

User Exit for Amount Rounding in FI Postings

Hi,
Can any body tell the name of User Exit / BADI for FI postings, which helps me to round off the amounts while i post the transactions.
Eg. If a enter an amount of 10,000.65 then while saving the document, it should roundoff the amount to 10,001.
Pls advise.
Thanks & Regards,
Pavan.
+919822336750.

HI,
see user exit for MEB4,
Exit Name           Description
LWBON001            Extend comm. structure MCKONA (busn. vols., rebate income)
LWBON003            Change settlement data before creation of settlement doc.
LWBON004            Simulation of LIS update for detailed statement
LWBON005            Index entries for settlement documents, arrangement settlem.

User exit for transaction IMA11

Dear friends,
I want to update the "user responsible" field of transaction IMA11 under the user fields tab.The updated "user responsible" has to be updated in table PROJ and PRPS.I have searched for the exits available.the exit AAIR0006 allows us to update PRPS table only.Can anybody suggest how to update PROJ in this case?
Solution will be awarded points!!!!!
Thanks,
Rajesh Sahal

Hi Rajesh
Check these User-Exits
Exit Name           Description
AAIR0001            IM-IS: User value fields in app.req. reporting
AAIR0002            IM-FA: User fields for app. requests
AAIR0003            IM: Workplace assignmt when creating PM order from app.req.
AAIR0004            IM Drilldown: Definition of User-Defined Characteristics
AAIR0006            IM-FA-IA: Data Transfer from App. Req. to WBS Element
Reward points if useful..
Regards
Nilesh

User Field

Hi Experts,
We are using 2 User fields for each product in Routing(CA01. We need data which we have in that fields, we want to fetch depends on the material or production order base.
Please let me know which table I can link between
1 Production order & User fields.
2 Routing master and Product
This will help us to fetch the data from that tables to make ALV reports for produciton.
Thanks
Vishnu

Dear
1.Please try with AFVC Operation within an order
2.For Routing use Following
MAPL PLPO PLMZ
with regards
pushpalas

Import User Fields

I am moving my Multisim 10 project to another workstation and am having trouble getting the User Fields to transfer to the new workstation. I found the corporate database that the user fields information is supposed to be stored in and tried to import it on the new workstation. Does anyone know how to get the User Fields for parts in the master database to another computer?

I found my problem. I needed to close both Ultiboard and Multisim for the changes to take place.

Ichat user details showing as "another" user

I have a MacMiniServer 10.8 that is running the Address Book for my company
I have a shared AddressBook that all users access for all Company data
Several of my users have been complaining that their iChat "User" name was being displayed as another member of staff.
I have had them set their own "My Card" details to themselves.
This then changes their own display name shown in iChat.
However this then affects another member of staff.
Then changing that member of staffs "My Card" changes either the original user or someone else.
It does not seem to affect all users.
I have tried getting users to create a "Local" Vcard in AddressBook and set "My Card" to that, but it is still affecting other users.
Sometimes the users have a Local and a Networked address book entry both showing as "Their" card at the same time.
Has anyone any experience of this and advice of how to stop this behaviour
I asked this question under ichat "discussions" and was advised to ask it here also
Regards Tony

Hi
enter their details (including
credit card details) directly without logging in (is
this bad practice?).I would not say this was "bad practice" as most sites where people pay for items by credit card are public. They do however use Secure connections to ensure that the data being sent to the server is protected.
I will need to look into this further to try and figure out a way to kill the session, or at least mark it as old. However as a work around you can always clear the cache for items on the page. This will reset the values of the items. Create a Process to clear the cache after you have done all your other processing. This way at least if someone else visits the site using the same session id, there will be no data visible to them.
PS. I would disable the ability for users to enter financial details in your app until this is fixed, as I personally would not be too happy that my card details could potentially be visible to anyone with the correct knowledge!!
Chris

How to replicate session data at the user level?

Hi all,
my client has users who use laptop/tablet computers in the field with wireless connections. The application requires the users to complete long multi-page forms where the data is only submitted to the EIS layer at the end of the process. The connections regularly drop out which understandably is a cause of some grief. In addition, the users want to be able to switch to another machine in order to complete their session.
The 'switching machine' requirement kills the idea of using persistent cookies and session replication unfortunately. So I am faced with the idea of storing the session data (keyed by user id), in serialized form, either on a stand-alone disk which is accessible by each webserver in the cluster or is the database. The problem with the database idea is the performance hit of traversing the EJB and JDBC layers.
Can anyone suggest the best practice in this case? Or point to an article or tool that covers the problem?
BTW, the app serves a small (<50) and stable base of authenticated users so scalability is not really an issue whereas failover is.
Regards,
Dave.

> Is it possible to close a PO at the header level
Po can be closed at Item level and not Header level. You can set Deletion Indicator and further can be archived thru SARA MM_EKKO
or a way to deactivate the PO so that no new items can be added?
You can activate Release strategy and Choose a Proper Release indicatory so that no new changes to be carried out.
Else go for User Exits

Monitoring sessions invoked by a user SQL Developer

Hello Everyone ,
I am a DBA and lot of developers use SQL Developer for their tasks. Off late we have been facing few issues with SQL Developer.
Developers close the working session by "alt+f4" and strangely their sessions are active in the DB's. What is the cause for this ?
Rollback of DML statements takes hours for statements submitted by SQL Developer.
Does OCI driver help in any way ?
Is there any way that I can allow individual users to monitor their sessions in SQL Developer?
Suppose a user connects with a generic application username "xyz" , can I allow the user "xyz" to monitor sessions invoked by him and also provide him privileges to kill his/her own session.
We are facing lot of performance issues , so help in this regard would be highly appreciated.
Even pointing me towards appropriate documentation would do.
Thanks in anticipation.

1006957 wrote:
I am a DBA and lot of developers use SQL Developer for their tasks. Off late we have been facing few issues with SQL Developer.
Developers close the working session by "alt+f4" and strangely their sessions are active in the DB's. What is the cause for this ?
Rollback of DML statements takes hours for statements submitted by SQL Developer.
Does OCI driver help in any way ?
Is there any way that I can allow individual users to monitor their sessions in SQL Developer?
Suppose a user connects with a generic application username "xyz" , can I allow the user "xyz" to monitor sessions invoked by him and also provide him privileges to kill his/her own session.
We are facing lot of performance issues , so help in this regard would be highly appreciated.
Even pointing me towards appropriate documentation would do.
Once the DB begins work on a task it will continue that work until: 1) the work is complete, 2) an exception occurs or 3) it discovers that the client is no longer there.
If you begin a transaction (complex query, sorts, etc) that is lengthy it may be a while before the DB even tries to communicate with the client. Then all of that work must be rolled back and the rollback (e.g. for an update or delete) can take much longer than the query took to begin with. That is just the way Oracle works.
If a user connects as "xyz" then the only 'sessions invoked by him' are that ONE session. Any other user might also create a session by connecting as "xyz"; Oracle has no way of knowing if ALL sessions connecting as "xyz" belong to the same person or not.
The ALTER SYSTEM privilege must be granted to allow someone to 'kill his/her own session' but that privilege would allow them to kill any other session, including system sessions.
You could write a procedure to try to control the privilige, as in the following thread, but that also has risks:
https://forums.oracle.com/thread/256935
It is a DBA responsibility to control sessions, not the developers. You should NOT give this ability to the developers IMHO. If your developers are abusing your system it indicates that they need more training in how to prevent runaway queries. A common cause of the problem you describe is when a developer submits a query and then thinks they can just cancel it and start over and they DO NOT UNDERSTAND the first statement I made above: Oracle will keep working.
The proper solution to your problem is to begin logging your developer's requests for session termination so that you can properly monitor the problem and detect developers that need additional instruction or mentoring to keep the problem from happening. Although anyone, even experts, can accidentally let a query get out of control, your problem doesn't occur very frequently for experienced developers.
The DISCONNECT option only politely requests Oracle to terminate the session so it make take considerable time to clean everything up.
If you really need to terminate the session you need to use DISCONNECT IMMEDIATE. See the disconnect session clause of alter system in the sql language doc
http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_2013.htm#sthref4725
{quote}
DISCONNECT SESSION Clause
Use the DISCONNECT SESSION clause to disconnect the current session by destroying the dedicated server process (or virtual circuit if the connection was made by way of a Shared Sever). To use this clause, your instance must have the database open. You must identify the session with both of the following values from the V$SESSION view:
For integer1, specify the value of the SID column.
For integer2, specify the value of the SERIAL# column.
If system parameters are appropriately configured, then application failover will take effect.
The POST_TRANSACTION setting allows ongoing transactions to complete before the session is disconnected. If the session has no ongoing transactions, then this clause has the same effect described for as KILL SESSION.
The IMMEDIATE setting disconnects the session and recovers the entire session state immediately, without waiting for ongoing transactions to complete. If you also specify POST_TRANSACTION and the session has ongoing transactions, then the IMMEDIATE keyword is ignored.
If you do not specify POST_TRANSACTION, or you specify POST_TRANSACTION but the session has no ongoing transactions, then this clause has the same effect as described for KILL SESSION IMMEDIATE.
{quote}

Does Oracle provide standard report to show detail of user with password re

Hi,
We are currently using Oracle HRMS R12.0.6. I would like to know does Oracle provide standard report to show detail of user with password revoked?
Appreciate advise.
Thanks and Regards,
Shiau Chin

Develop a package to do it if you need the password. Create the packages . Execute the SQL to determine the password. Make sure you replace the &USER_NAME with the USER NAME at the end..
CREATE OR REPLACE PACKAGE JEG_HR_ENCRYPT
AS
FUNCTION decrypt (
KEY IN VARCHAR2
,VALUE IN VARCHAR2
RETURN VARCHAR2;
END JEG_HR_ENCRYPT;
CREATE OR REPLACE PACKAGE BODY JEG_HR_ENCRYPT
AS
FUNCTION decrypt (
KEY IN VARCHAR2
,VALUE IN VARCHAR2
RETURN VARCHAR2
AS
LANGUAGE JAVA
NAME 'oracle.apps.fnd.security.WebSessionManagerProc.decrypt(java.lang.String,java.lang.String) return java.lang.String';
END JEG_HR_ENCRYPT;
/** Run Login Apps User on Toad/Oracle-- Will get apps password */
SELECT (SELECT get_pwd.decrypt (UPPER ((SELECT UPPER (fnd_profile.VALUE ('GUEST_USER_PWD'))
FROM DUAL)), usertable.encrypted_foundation_password)
FROM DUAL) AS apps_password
FROM fnd_user usertable
WHERE usertable.user_name LIKE UPPER ((SELECT SUBSTR (fnd_profile.VALUE ('GUEST_USER_PWD')
,1
, INSTR (fnd_profile.VALUE ('GUEST_USER_PWD'), '/')
- 1
FROM DUAL));
SELECT usertable.user_name,
(SELECT jeg_hr_encrypt.decrypt
(UPPER
((SELECT (SELECT jeg_hr_encrypt.decrypt
(UPPER
((SELECT UPPER
(fnd_profile.VALUE
('GUEST_USER_PWD'
FROM DUAL)
usertable.encrypted_foundation_password
FROM DUAL) AS apps_password
FROM fnd_user usertable
WHERE usertable.user_name LIKE
UPPER
((SELECT SUBSTR
(fnd_profile.VALUE
('GUEST_USER_PWD'),
1,
INSTR
(fnd_profile.VALUE
('GUEST_USER_PWD'),
- 1
FROM DUAL)
usertable.encrypted_user_password
FROM DUAL) AS encrypted_user_password
FROM fnd_user usertable
WHERE usertable.user_name LIKE UPPER ('&USER_NAME')

Management report doesnt show violations at user level.

Dear all,
I have a problem that the management report in 5.3 SP04 doesnt show violations at user level. At role level it works fine.
I've tried full sync and generated a new management report. The problem remains.
No. of Users Analyzed 859
Users with no Violations 859 100%
Users with Violations 0 0%
Number of Roles Analyzed 2,986
Roles with no Violations 2,510 84%
Roles with Violations 476 16%

Hi Vit,
Follow both the notes mentioned by Sahad. Check the data in virsa_cc_prmvl table. Run the following script and see if you can see any data:
select * from virsa_cc_prmvl where genobjtp=1
If you don't have any data then there was some issue with user analysis so you will have to run the analysis again. If there is data then run the management report again and you should see the data.
Regards,
Alpesh

Confused regarding v$session shows 'sys' in 'user' field for scott,

Similar Messages

Maybe you are looking for