Confused with created Recovery disks
I had to make up the 2 recovery disks as stated in the handbook and I had to use them this morning, but I only had to use 1 so why create 2 and do you have to use the the 2nd one at all.
I thought the computer would go back to 64bit as pre-installed but when I checked it was only 32bit.
You can use second one if asked.
I don't know which notebook model do you have but if it was offered with 32 and 64bit OS I can imagine by recovery creation 2 discs were created for both versions.
When you start recovery procedure with disc1 is there option to choose between 32 and 64bit OS?
Similar Messages
-
How to create recovery disks for Lenovo H530s with WIndows 8.1
Hello there,
I just purchased a Lenovo Hf30s type 10131 with Windows 8.1, mini tower: http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/lenovo-h-series-desktops/lenovo-h5...
I like to create recovery disks, but the already installed program OneKey Recovery does not have the option of recovery disks, it allows only larger media such as USB stick and hard disks.
Here to I have 2 questions:
1. Is there a way to create a recovery disks that will create the original factory settings with 5 partitions?
2. Does any one knows if the recovery siskd sold by Lenovo (for Netherlands they cost between 23 and 38 Euro) would do the job by creating the factory settings with 5 partitions?
My goal is to reformat the hard disk and aprtitionig it the way I need it, but in case of anything, I would like to be able to go back to the original facttory state of the unit, especially if I have a harddisk failure and neer to replace the hard didks.
Thank you in advance and I wish you a very pleasant and successful day.Hi Mlenovo,
Welcome to the Lenovo Community.
As per the query we understood that you are looking to create a recovery drive for your Lenovo h530s desktop.
As you have asked for the recovery disk, please refer to the below link this might help you to create the recovery media
Click here for the recovery media.
Hope this helps! Do post us back for further queries.
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Do user-created recovery disks work with replacement HDD of different capacity?
The original Seagate 250GB SATA HDD in my Pavilion G60-214EM notebook has completely failed (BIOS and other Windows machines cannot even see it). I replaced it with a Samsung 160GB SATA HDD but Recovery Manager on my user-created (DVD-R) recovery disk consistently fails at 2% of "Reformatting the Windows partition of your hard disk drive". If I look at the resulting partitions from another machine I see a 10.61 GB NTFS 'RECOVERY' partition, an empty active primary NTFS partition of 37.12 GB and 101.31 GB still unallocated.
Should the user-created recovery disks work if the replacement disk drive is smaller capacity than the original?
Should they work with a larger capacity replacement drive?
If not, can HP provide recovery disks that will work with a different capacity HDD?
Thanks,
--AHi, I am the same predicament as you are From my experience thus far, the replacement disk drive space needs to be bigger or equal to the original HD space. (e.g.. I had a 640 gb OEM HD, I cannot install or factory reset the new 500 gb WD HD because it says its too small...)
As for question 2, I am going to try to get a 1TB hard drive, though I don't know due to the prices and such. Will post back if I do.
Question 3: I do not know, someone else may be more knowledgeable:/
Hope this helps! -
How to create recovery disk of OS X lion with Xcode 4
Dear All,
Can anyone tell me please how to create recovery disk for osx lion in case my OS crash . I want to create recovery disk please help me .
Regards
alfanDear ,
i am facing problem to upgrade my macbook pro 15 inch 10.6.3 to os x lion 10. 7 with recovery drive.
actually i m trying to install os x lion with the following method but could not install. i use 2 methods to install os please help me where im doing mistake.
1st method.
i make a recovery drive with recovery disk assistant on macbook air 13 inch which is shipped with lion 10.7 . and i connect my recovery drive with macbook pro 15 inch on which OS is snow leopard 10.6.3, for upgrade/install OS X lion on my macbook pro 15 inch by recovery drive.
when i hold down option key i can see my recovery drive . i can boot through my recovery drive but when i try to install os x lion the computer says
"you cant upgrade this version of mac os x "
2nd method
i made recovery drive on macbook pro 13 inch which is upgraded snow leopard to lion and then i try to upgrade my macbook pro 15 inch then the same problem i am facing
"you cant upgrade this version of mac os x "
Please help me
Regards
alfan -
Cannot create recovery disk after update to Win 8.1 on G580
Friends
I have a Lenovo G580 that came with Win 8.0 preinstalled. I upgraded it to Win 8.1 over the Internet.
When I try to run the "Create recovery disk" I get the error that states that "We cannot create a recovery drive for this PC. Some required files are missing..."
I found out that the winre.wim file that is supposed to be in the C:\Windows\System32\Recovery folder is not there. I cannot locate it anywhere on the C or D drives either. I believe there is a copy on one or more of the recovery partitions but I do not know how to get that file from those partitons.
I am confused as to why there are seven partitions on that one drive:
1 Recovery partition 1000 MB
2 EFI system partition 260 MB
3 OEM partition 1000 MB
4. Recovery partition 350 MB
5. Recovery partition 20 GB
6. Lenovo D: 25 GB
7. Windows 8 C: 250 GB
Can someone help me and give me some instructions on how I can fix the system to find the winre.wim file?
Thanks for any good input.
CalleHi Calle,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the error message is displayed in your G580 Laptop, as the OS (Operating System) installed is Windows 8.1 or Windows 8. Recovery discs cannot be created only a “Recovery Media” can be created using USB Flash drive, below is the link to create USB recovery drive.
Create a USB Recovery Drive
Do post us back if the issue persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
How to create recovery disk on HP envy dv6 7258nr notebook pc - window 8
I m trying to create recovery disk from recovery drive which is created by hp while purchasing the laptop, while taking back up from recovery manager, Recovery Manager says (Recovery Partition has been removed - Recovery Media creation option is no longer available) , but as per my knowledge i did not took back up of recovery drive. So what should i do to take back up of my recovery drive to **bleep**.
Based on what you have stated, it appears that you or someone else with access to your notebook deleted the recovery partition. Without the recovery partition on the hard disk you can't make recovery media.
Your best option at this point would be to purchase a recovery disk set from HP or an HP Partner.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
HT4848 Error creating recovery disk in Disk Assist
I've carefully followed all instruction in this post: http://support.apple.com/kb/ht4848, but I am having an error when creating the recovery disk.
The recovery Disk Assist starts creating it, but stops early on. The message I get is titled "Conclusion," and it says "The recovery drive wasn't created. There was an error creating recovery disk."
Can anyone help me with this? I followed all the steps in the post above and I also created the partition on the external drive.
I really need to wipe out my computer and make it appear "as new" because I am selling it. Any help would be great!
Thanks!Same happened to me. This makes absolutely no sense, but I just kept trying and trying then it finally worked. For me, it hasn't been worth the bother. These restore DVDs don't work like the ones I made for an Acer laptop, for example. On my Acer, I repartitioned, reformatted my drive and was easily able to restore my computer before I sold it. I've been going nuts trying to restore my computer after a clean install of Windows 7. Still can't get it to work.
-
Unable to create recovery disk using media creation on hp pavilion g6 2236tx
i am attempting to make recovery disk of my notebook through hp media creation i am using DVD disks for the same but the problem is that when the processing bar reaches almost 99percent it shows error message that unable to create recovery disk try again later!
please help!Hi saksham_jain,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you tried to create your recovery DVDs using HP Media Creation and it failed. Here is a document to assist you with creating the recovery DVDS. Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7).
If this should fail for any reason, please provide the error and any other details.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Creating Recovery Disks when Windows 7 won't Boot
My sister's hard drive is in imminent failure on HP G60-535DX Notebook. Windows 7 won't boot. I need to make recovery disks. I have been able to back up info going into System Recovery Manager, but I don't see an option to create recovery disks to install the system on a replacement hard drive. Is it possible to create the disks or order them?
Thanks,
Nanila51
This question was solved.
View Solution.Hi,
You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Unable to create recovery disk
I have Leovo G530 35U 3000 series laptop. When I tried to create recovery disk by clicking "Create Product Recovery media" , a new window for creation appear. But the check box for "product recovey disk you are going to creae are for this conmuer use only" and ok button get diactivated.
Is there ny other option to create prouct recovery disk?
Can anyone help me?Hi saksham_jain,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you tried to create your recovery DVDs using HP Media Creation and it failed. Here is a document to assist you with creating the recovery DVDS. Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7).
If this should fail for any reason, please provide the error and any other details.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Creating Recovery Disk from another Windows
Hello everyone, my laptop is HP Pavilion dv6 7040-tx and Product NumberB8N04PA#ACJ. It came with Windows 7 Home Premium which is also, in the recovery partition. I removed Windows 7 Home Premium and installed Windows 7 Ultimate. Now I want to create recovery disks for the Windows 7 Home Premium from the Recovery Partition. But I don't have HP Backup and Recovery Manager installed in Windows 7 Ultimate. Can any one tell me how to do this without doing recovery or removing my current Windows 7 Ultimate installation??
You must burn the Recovery Disks before installing another OS. You can call HP to order a set.Choose your country here>> Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
0X4001100200001012 error with windows recovery disk
For quite some time (over a year), I've been seeing chat about this error when attempting to make recovery disks on Dell machines. Basically, a recovery disk made in windows 7 starts to boot, when tested, but then gets to what looks like the blue background
for a normal startup screen and shows an error code 0X4001100200001012 error.
Invariably, someone trots out advice about burning disks slower or running a file error check. Neither of these work. Some believe that the error has something to do with the Dell recover partition that all Dells ship with.
If one boots with the windows 7 install disk, all goes well, and one can recover an image file, so it is definitely some sort of error introduced at the windows 7 recover disk creation process.
I have seen this problem with 2, different model, Dells. An HP does not have the problem. Its recovery disks work fine. All three machines are running different versions of windows 7 64.
Do you have any insights into what is causing this error, and whether it can be remedies or if Dell owners just have to live with it? Calling Dell technical support is...well, lets just say that life is too short.
Brad Bortner
Cambridge MAHi,
According to your description, it indicates you have a problem with your recovery disk. It may be caused by recover disk creation process.
You could refer to the similar thread; maybe they can give you some hits:
Windows 7 repair disk error code 0x4001100200001012
windows 7 recover disk fails with 0X4001100200001012
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
hi i just bought a mac pro but i notice that it didn't come with a recovery disk.where can i find the recovery disk?
https://support.apple.com/kb/HT4718
Reset your Mac
Most commonly used backup methods -
How to recover my 2000-299wm notebook too factory restore with the recovery disk
how to recover my 2000-299wm notebook qe28ua#aba too factory restore with the recovery disk Windows 7 64-bit
Hi:
Please read this document at the link below. Scroll down the page for how to recover from recovery disks.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01867418
Paul -
Hey guys ı really need your help. I bought macbook pro retina 15 inch 2 weeks ago and it came with installed mavericks of course but ı want to create a recovery disk and to do that ı need to download mavericks installer from app store but when i click to download mavericks from appstore purchased part ı get a message says " Your purchasing process couldnt complete. OS X Mavericks cant be installed to this computer." How can ı solve this problem!??
One way around tis is to borrow a Mac that can run Mavericks and then the download will work. You can use these instructions:
http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
Though they are for Mt. Lion, the same steps will work.
Ciao.
Maybe you are looking for
-
I recently updated my computer to mountain lion and after doing so my computer would no longer boot up. I took it to the apple store and they told me that the hard drive was damaged and needed to be replaced. They were booting my computer with an e
-
1.1.3 Firmware Not Working Correctly
For some reason, my 1.1.3 firmware does not work. If i go in to setting and about, it says i have 1.1.3 installed, but, i do not have the wiggle function nor do i have ANY of the 1.1.3 updates. Any advice on how to fix this would be apprecited.......
-
Hallo, How many in-built functions and Packages are in Oracle 9i? Exact number and their respective syntax.. How many standard keywords or commands, facilities [like SELECT, INSERT, SET HEADINGS ON/OFF] in Oracle9i? Where can i get this information o
-
MRP planning for trading company
Hello guru , We are a trading company .We have various sales office and show rooms where customer places their order (Sales Order ).We get the material from various vendors depending on the demand comes to the company collectively .Here most the mate
-
Hi, I have tested the new FP11 beta 2 on Windows 7 64bit with an Online Intel GPU: with FP11 Incubator or beta 1 everything was fine, but with beta 2 there is no hardware accerlation anymore and the Software mode is extremly slow, even without any 3D