Confused with PSU...

Hi:
Just to say hello since I am new to this forum.
6 months ago, I decided to buy the following system:
K7N2 Delta2 Platinum
Corsair TwinX PC3200 C2 (cas 2-3-3-6), 2x512
Nvidia Gforce FX 5200 (Non Ultra, just the 128MB one).
Athlon XP 3000+ (Barton core with 166MHz FSB)
Two Optical drives (One's a DVD, the other is a CD-burner)
80GB HDD (It's a Maxtor).
The CPU and the vid card were spare parts from an old computer I had, so all I did was buy the mobo and the rest of stuff.
Today, I bought a 450W PSU, to be more specific, it's a Nspire PSU with the following specs:
The 3.3V and 5V are above 30A, what worries me is that it has two 12V rails each one with the following specification: 12V1: 15A, 12V2: 17A (total 12V output combined: 34A).
I'd like to know if the 12V rail would be enough for my system, since it seems that it splits the 12V rail in two.
I've been using PSU's for a long time, but I'm new to this type of ones with split 12V rails
Here's the link for it:
http://www.shop4tech.com/item4696.html
Thanks in advance.
P.S: Just as a note, I'm planning to overclocking my system. That's why I need to know if my system (including the PSU) would be OK for it.

Glenn, thanks for clearing my doubts on this because I was worried that 15A in the 12V1 and 17A in 12V2 were too low, since many have stated that the minimum to go with is 18A.
Anyhow, it looks like the 12V rail combined has a total output of 32A which I believe it's more than enough.
Thanks guys, you were really helpful (Glenn and Richard).

Similar Messages

New bug in 8.02 - regions confused with each other

So, I just updated to 8.02, and loaded up a recent project that was half finished (bad idea).
Now I have some strange bugs going on that I never had before, and they are basic issues.
My audio regions keep getting confused with each other.
I have an audio region that I can't open in the sample editor. When I double click on it, the sample editor will bring up the last region I edited, not the new one. I've re-named the region, deleted it and re-added it to the arrange window, but this region will not open in the sample editor.
I can see it in my media bin, and preview it there, and it plays in my arrangement no problem, but I can't get it to open in the sample editor. In fact sometimes when I click on it, with the media window open, I can see another sample being 'selected' in the media window instead of the proper audio region.
Scott

finally i find someone else with the same prob, o already post into apple.com too
yes here the same, bug new in 8.0.1, cause on logic 8.0.0 all works fine (except some click noise when you pre-listen a file in autoloop)
however here what i can say to you (it's 3 days i'm studyng this cause i make a massive use of ultrabeat)
- no matter both power pc / intel soffer of this bug
- i try to update to leopard from my 10.4.11 (same bug) tryin a new os installation (same bug), tryn without audio card and driver (same bug)
so i really don't know how to solve it, cause there are only few people that have this problem
big mistake and big mistery

Socket Programing in J2ME - Confused with Sun Sample Code

Hai Everybody,
I have confused with sample code provided by Sun Inc , for the demo of socket programming in J2ME. I found the code in the API specification of J2ME. The code look like :-
// Create the server listening socket for port 1234
ServerSocketConnection scn =(ServerSocketConnection) Connector.open("socket://:1234");
where Connector.open() method return an interface Connection which is the base interface of ServerSocketConnection. I have confused with this line , is it is possible to cast base class object to the derived class object?
Plese help me in this regards
Thanks in advance
Sulfikkar

There is nothing to be confused about. The Connector factory creates an implementation of one of the extentions of the Connection interface and returns it.
For a serversocket "socket://<port>" it will return an implementation of the ServerSocketConnection interface. You don't need to know what the implementation looks like. You'll only need to cast the Connection to a ServerSocketConnection .

Confused with document life & account life

I have a doubt regarding archiving
I think in archiving projects especially for finance module
there are lot of customization settings to be done form the functional side before Archiving , for example Document life ,Account life... etc
I have a doubt weather those customization settings needs to be carried out by archiving consultant or
the FI functional consultant?
Can any one tell what is the difference between Secondary indexes and Archive Indexes in FI ?
i am really confused with the Archiving projects..... can any one help me
Moderator message: not related to ABAP development, please post again in the appropriate SDN forum, always search for available information before asking.
locked by: Thomas Zloch on Sep 23, 2010 11:41 AM

Patience is a virtue.
Rob

Confused with HD-SD

Hi,
All the sudden I am confused with my searches on this forum and would appreciate clarification
I am presently working on a HD project (from HD clips and HD stills).
If I want to get the best out of it, should I use only BluRay burning or would it be OK to use HD setting and burning with DVDSP on a "regular" DL disk (the compressed project will be over 7 GB ?
Should I understand that if I use HD setting with DLdisks only a HD compatible DVD player will be requested ?
will a Bluray player play the HD-DL fine ? or will a bluray disk be requested on bluray player ?
As you can see I just got really confused ...
Thanks in advance
Ivan

No doubt this stuff can be confusing. Hopefully I'll be able to clear a few things up.
You shot and edit an HD project in HD. Now you would like to create a DVD correct?
You have 2 options for DVD
1. Standard Definition DVD authored in DVDSP.
2. Blu-Ray DVD. You'll have to purchase a burner.
If you are on the newest FCS then you can author and burn a Blu-Ray DVD inside of Compressor. If you are on the previous version then you need another application to author and burn Blu-Ray like Toast or Adobe Encore.
You made mention of HD-DVD. That format is dead and won't play on anything other than your Mac or a couple specific HD-DVD players that haven't been in production for years. If you look in the DVDSP preferences you can choose which kind of DVD to burn SD-DVD or HD-DVD. Choose SD whenever you are using DVDSP.
Blu-Ray players play Blu-Ray DVD's and SD DVD's. It will not play HD-DVD.
How long is your project if the compressed (m2v) files are coming in at over 7GB?

SS9 CC5.6 compiler bug - algorithm count confused with struct member

Found some code that fails to compile in CC 5.6
CC: Sun C++ 5.6 2004/07/15
#include <algorithm>
using namespace std;
struct A {
int count;
struct B
struct A *a;
int main(int argc, char **argv)
struct B *b = 0;
// This line fails to build, any other operator is ok
if ( b->a->count < 50 )
return (1);
}Fails with error :
"c56_algorithm_bug.cpp", line 21: Error: Unexpected ")" -- Check for matching parenthesis.
"c56_algorithm_bug.cpp", line 22: Error: "," expected instead of "{".
"c56_algorithm_bug.cpp", line 22: Error: Illegal value for template parameter.
"c56_algorithm_bug.cpp", line 22: Error: ")" expected instead of "{".
4 Error(s) detected.The compiler is getting confused with the use of the count struct member vs the count algorithm. Changing the < to a > fixes the problem.
Using CC5.3 works fine as well as all other compilers we use (gcc 3.4, mipspro 7.4, VC 7.1)
Anyone seen this ?
- mark

This bug has been fixed in the C++ 5.6 compiler. I'm not sure if the fix is in the first patch which is about to be released. If not, the fix definitely will be in the next patch.
The workaround is not to use
using namespace std;That using-declaration is a pretty big hammer, and often results in conflicts with user code, compiler bugs aside.

Again confused with delta update.

Hello experts
I am confused with delta update as usual
I have one Infocube in which last data pull was on 29.11.2005.
If now again I run delta load then will it pull entire data from 2005 to 2008 or I should delete all data from cube n do full load??
Kindly explain
Regards
Swati

Hi Swathi
LIS EXTRACTION
T.code - :MC18 create field catalog
1. Characteristic Catalog
Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory
Controlling, etc..
Catalog category 1. Characteristic catalog, 2. Key figures catalog 3.
Date catalog
Select characteristic catalog and enter, click on characteristic select
the source table and it will be display the relevant source field and
select the source field, copy + close, copy.
Save, similarly create key figures catalog
T.code : MC21 create infostructure
Example
Inforstructure : S789
Application 01
Choose characteristic select the catalog, select the fields, copy +
close
Choose key figures catalog select the key figures ,copy + close, save
and generate
T.code MC24 create updating
Infostructure : S789
Update group : 01- Sales document, delivery, billing document ,enter
Select the key figures click on rules for key figures give suggest
rules, copy save and generate
Click on updating (activate updating)
Select the infostructure set periodic split 1. Daily, 2. Week, 3.
Month, 4. Posting period
Updating 1)No updating,2)Synchronous updating (V1), 3)As synchronous
updating (V2), 4)As synchronous updating (V3),
T.code LBW0 - Connection of LIS Information structures to SAPBW
Information structure : S786
Select the radio button-Setup LIS environment and Execute.
Select the radio button-Generate data source and Execute.
For Delta update:
Select the radio button-Generate updating and Execute
Select the radio button -Activate / deactivate and Execute.
T.code SBIW Display IMG (implementation guide)
Setting for applications specific data source logistics Managing
transfer information structure setup of statistical data applications
specific setup of statistical data perform statistical setup sales.
Choose activity
Setup Orders, deliveries, billing
Choose the activities enter the infostructure (S789), give name of the
run, date of termination, time of termination, No. of tolerated faulty
documents. Then execute
T.code RSA3 Extractor checker
Give the data source name eg. 2LIS 01S789 and execute, result will
get some records
Go to BW side replicate data source Assign infosource Create
infocube Create update rules create infopackage and schedule the package
with initialize delta process.
For delta update :
In R/3 side
T.code MC25, set update (V1) or (V2) or (V3)
T.code LBW0, choose generate updating and execute then choose
activate / deactivate and execute
BW side - create infopackage and schedule the package with delta
update.
First time if your scheduling the infopackage -in R/3 side T.code :MC25
-Udating set to No update,insted of selecting the update V1,V2,V3.
If your doing the Delta update:in R/3 side T.code :MC25-Updating set to
either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button
Active/deactivate and Execute.
and schedule the infopackage with delta update.
Regards,
Chandu.

I purchased an IPAD2 for my special needs daughter. She only currently understands lowercase letters only and gets confused with the uppercase letters. Is there a way to change the keyboard to display lowercase letters?

I purchased an IPAD2 for my special needs daughter. She only currently understands lowercase letters only and gets confused with the uppercase letters. Is there a way to change the keyboard to display lowercase letters?

There is no way for the keyboard itself to display only lower case letters. It doesn't display lower case letters at all for that matter.
When you are using the keyboard - The other issue that you will have is with the shift key. Even with auto caps turned off you can still type capital letters if you tap the shift key and if you double tap it by mistake - it will turn into all capital letters so also turn off Caps Lock in the keyboard settings.
Other than that, there is no way to ensure that you can type in lower case.
Maybe an external bluetooth keyboard would be a better solution but I don't use one, and I have never even seen one in person so someone else will have to verify that for you.

Confusing with AddJavaFile in jdev.conf

I am confusing with the format in AddJavaFile in jdev.conf:
for example:
AddJavaLibFile ../../BC4J/lib/bc4juixtags.jar
AddJavaLibFile ../lib/batik-xml.jar
their absolute paths respectively are:
/usr/jdeveloper/
/usr/jdeveloper/jdev/
could anybody give me some help?
Thanks a lot!
Peter

sorry for my unclear question.
my installation is <jdev_root> = /usr/jdeveloper/
From the file, I got:
AddJavaFile ../../BC4J/lib/bc4juixtags.jar
it seems to me it equals : jdeveloper/jdev/BC4J/lib/bc4juixtags.jarActually it should be:
/usr/jdeveloper/BC4J/lib/bc4juixtags.jar
and not:
/usr/jdeveloper/jdev/BC4J/lib/bc4juixtags.jar
another line is:
AddJavaFile ../lib/batik-xml.jar
it seems to me it equals : jdev/lib/batil-xml.jarCorrect.
there is unconsistency here (I may be wrong)Actually it is consistent. The jdev.conf file contains pointers to where JDev can find other components which it depends on. In the two cases which you point out, the first is part of the RT layer of BC4J (which is also shipped in iAS) and the second is the batik XML parser from Apache.

My confusion with logs in iAS 6.5

Hi everybody,
I am very much confused with the log files in iAS 6.5. Bit lengthy, but Kindly go through this slowly and help me in solving the same.
(1) In the settings -> Control Panel -> Services window, i have enabled "Allow Service to Interact with Desktop".
In the admin tool, i have checked "Enable Server Event Log" check box. I have also enabled the option "Log to console" and selected the message type to be "All Messages".
When i did this, i was able to see the logs as console(command prompt windows). When ever i run a jsp/servlet/EJB containing System.out.println() statements, i was able to see the std out messages in the KJS.exe console. What should i do these std out messages in a file rather than a console?
(2) In the settings -> Control Panel -> Services window, i have enabled "Allow Service to Interact with Desktop".
In the admin tool, i have checked "Enable Server Event Log" check box. I have also enabled the option "Log to File", gave the file name as "logs\ias" and selected the message type to be "All Messages".
When i did this, i saw the following files created under the installdir\ias6\ias\logs.
ias.10817
ias.10818
ias.10819
ias.10820
ias.10821
(10817 - kas port, 10818 - kxs port, 10819 - kjs port, 10820 - kcs port, 10821 - cxs port)
Since, these log files contains the port number of the above mentioned processes, i expected them to be the log files of the processes with corresponding port numbers. For example, ias.10819 to be the log of KJS process, since its port is 10819. Is it correct?
If it is correct, i am not able to see the System.out.println()
messages in this file, though it appears in the console(as mentioned in point 1 ). Why is it?
I want to see all the Std Out messages (which appears in KJS console) in a log file. What should i do for that?
(3) In the iPlanet Application Server Administration guide (Page 90), i found a way to log to a file on Windows platform. As per that document, i changed the IAS_KASLOGFILE from 0 to 1 in the System Variable and restarted the system. It created the file by the name, KAS.log in the installdir/ias6/ias/logs.
Now i was able to see the KAS process's console messages in this log file. But there is nothing written to the KAS console. Why is it?
(4) What is the difference between the log file ias.10817 (created as per in point 2) and KAS.log (created as per in point 3)?
thanks and regards,
desigan

Hi,
Can you please let me know the resource from where you have got this information ?
Thanks & Regards
Ganesh .R
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support

HT201342 I'm still confuse with this iCloud mail. I have 2 device which is iPhone and iPad, why every time I receive a mail from my iPhone it doesn't show on my iPad? Can you maybe help me out here thank you

I'm still confuse with this iCloud mail. I have 2 device which is iPhone and iPad, why every time I receive a mail from my iPhone it doesn't show on my iPad? Can you maybe help me out here thank you

The iphone and ipad must be connected to the same icloud account. Are you by chance using different IDs to connect from each device?

I am confused with the adobe photo shop album starter 3.0!

Hello, I have always been interested in storing pictures on my computer via my scanner or digital camera, but now I want to organise them using adobe.. However it has left me more confused.. since I downloaded it, it automatically imported pictures...but when I click on my regular photo files on my desk top, it does say adobe photo shop at the top of the picture- so does this mean it is already imported into the adobe?? as i am confused with what photos I have got where now.
In other words, I wanna make sure that all my pictures on my computer are in adobe. How do I do that ?
Excuse the daft question but I hate computers sometimes!
Thanks

Hi again Colin(and Jim), if I got the wrong end of the stick (which it appears I did) then I humbly apologise for being oversensitive. I have had some miserable experiences in newsgroup forums before now and witnessed relentless bullying on occasions and so I may respond in a defensive matter automatically. Thank you for setting me straight :-)
On a different tack, I wonder if you could help with another PSASE problem I have. When I go to print a number of prints on one page (eg.four to an A4 sheet-which it resizes to fit for you) there seems to be a loss of quality in the images. Is there a way of adjusting the resolution within the program, or do I need to adjust them within photoshop first ?

Hi we setup ISE in our lab and planning for prodution with 2000 user endpoints. We have SNS appliance but confused with ISE lice

Hi we setup ISE in our lab and planning for prodution with 2000 user endpoints. We have SNS appliance but confused with ISE license bt plus and advanced..Please advise.

Plus:
    Bring Your Own Device (BYOD)
    Profiling
    Endpoint Protection Service (EPS)
    TrustSec SGT
Advanced :
    Bring Your Own Device (BYOD)
    Profiling
    Endpoint Protection Service (EPS)
    TrustSec SGT
    Mobile Device Manager (MDM)
    Health Compliance and Remediation
    Posture
Base license is Perpetual

Confusion with Image/BufferedImage

Hello,
I'm trying to write an applet that displays and modifies local image files (gif). I'm running into some confusion with the different image APIs and drawing methods though.
I want to read the files, display them, and then create new images from sections of the original ones. I wrote an applet that succesfully loads and displays files as Image objects, but then I saw that BufferedImage has a method getSubImage() that I thought I could use to create the new images.
But my problem is that even without manipulating the images, I can't get them to display as BufferedImages. Here's the code, where I try to display the series of images twice, once as Image, once as BufferedImage, but the BI come out as black squares.
public class myapplet extends Applet
     BufferedImage[] img = new BufferedImage[NUM_PICS];
     Image[] im = new Image[NUM_PICS];
     public void init()
          Toolkit t = Toolkit.getDefaultToolkit();
          Graphics2D bg;
          MediaTracker tracker = new MediaTracker (this);
          for(int i = 0;i<NUM_PICS;i++)
               try
                    im[i] = t.getImage(gen.getLogo());
//the getLogo method is from a class I wrote -
//it returns a string with a filename
               catch(Exception e)
                    System.out.println("ERROR: "+e.getMessage());
               img[i] = new BufferedImage(70, 70,BufferedImage.TYPE_INT_RGB);
bg = img[i].createGraphics();
bg.drawImage(im[i],0,0,this);
     public void paint(Graphics g)
          Graphics2D g2 = (Graphics2D)g;
          for(int i=0;i<NUM_PICS;i++)
               g.drawImage(im[i],10,i*70,this);
               g2.drawImage(img[i],null,80,i*70);
Any help would be great.

You have to use the MediaTracker before drawing the image onto the BufferedImage:
try {
im[i] = t.getImage(gen.getLogo());
tracker.addImage(im[i], i);
tracker.waitForID(i);

Confusion with wiring - Cat5, Cat5e, Cat6?

I am moving into a new build house and have some confusion with the wiring.
So BT have wired from outside the house to a master socket inside the house.
Inside the house I have an extension and there is a Cat5 or Cat5e cable (am not fully sure which) connecting the Master and the Extension together.
I am interested in wiring Cat6 from the extension to other rooms.
My Infinity HomeHub will be connected at the extension (as the Master socket has been unsuitably positioned).
So my questions:
1. What type of cable is usually run from outside the house to the Master socket? Does this determine the maximum speeds my home will be capable of?
2. If I do not change the Cat5/Cat5e cable running between the Master and Extension to a Cat6 (keeping in mind that I am running my HomeHub from the extension) will I only ever achieve a maximum of Cat5/Cat5e speeds across my entire network?
3. Do I need to change the cable between the Master socket and the Extension to a Cat6 cable?
4. Alternatively, would I be better to ask the engineer to convert the extension into a Master?
So confused!

Hi unidentified,
If you're having FTTC Fibre broadband (eg BT Infinity upto 40mbps or upto 80mbps product) then the external line will be a standard "copper" cable running into the property and terminating at the master socket. The external line is not a cat5 or cat6 cable, just a standard "Copper" phone line.
If your having FTTP (Fibre to the Premises) (eg BT Infinity 160mbps or BT Infinity 300mbps product) then the external phone line would be a fibre cable that would enter your property.
Cat5e cable can acheive upto 1000mbps and cat6 is capable of 10-Gigabit speeds in some cases, however at the moment you won't be needing anything like that. However in both cases having the DSL (in your case VDSL or VDSL2) signals down the Cat5e or Cat6 cable to an extension socket will likelky reduce the speed slightly.
You may be best keeping the HomeHub or Openreach VDSL modem connected to the Openreach Master socket and having the Cat5e or Cat6 cable running to a router/switch or computer.
Hope that helps
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Confused with PSU...

Similar Messages

Maybe you are looking for