Confusing error message in job log of infocube loading job
Hello,
I executed a job which runs a process chain. The process chain has two important steps: It extracts tranaction data from a planning area in an infocube and it loads APO-relevant master data (materials, plants) from R3 system in the same infocube.
Almost every step of this process seems to be executed correctly. The loading process ended successfully. But the spool of the job is a bit confusing:
Loaded CVC's are all listed and appear with a green traffic light. Master data appear with a red traffic light and with the comment: Product xxx does not exist. The same with the location.
Does anybody know why the signals are red in this case.
In APO and R3 all listed master data are available - in the planning area as well as in the infocube after the data loading.
So, I am very confused about this message text in the spool because everything seems to be ok....
Thanks in advance
Best regards
H.Becker
Hello Heinz,
First of all, we need to be sure regarding which step the particular log correspoinds to.
You mentioned that your process chain has 2 steps.
Do you know how to look at the logs for a particular step of a process chain?
Go to RSPC, double click on your process chain, and then click the log button at the top?
You would now be in the log view. Then double-click on the step no.1, and see the information contained in the central tab named "backg". Does this contain the errors corresponding to you reds (that location or product does not exist)?
If not, repeat the same step for step 2.
Once you are sure regarding the step against which you are getting your error, please share soe more info regarding the step.
Then we could look further into the possible cause.
PS: Your first message itself was very confusing. You mentioned that you get transaction data from planning area to the cube, and you also get CVCs (location/products) from R/3 source system to the cube. This is very confusing.
Thanks - Pawan
Similar Messages
-
Error message in alert_SID.log & PMON.trc
OS: Redhat6.2
DB: Oracle Enterprise 8.1.5
getting the error message in alert_SID.log
PMON started with pid=2
OER 536879337 in Load Indicator : Error Code = 562604272 !
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
as well as continual following error messages in both alert_PID and PMON.trc
Load Indicator not supported by OS !
Tue Jun 13 00:12:39 2000
Load Indicator not supported by OS !
Tue Jun 13 00:13:12 2000
Load Indicator not supported by OS !
Tue Jun 13 00:13:46 2000
I understood that this has to do with the mts_dispatchers param in the init file, but I need to run it as a shared server rather than a delicated server.
Can anyone help?
nullHi,
As far as I am aware you should be able
to obtain a patch for bug 987647 from oracle.
to Stop the PMON error from appearing.
However they apparently do not see the recurring Load Indicator Message as a bug. It is simply reporting facts. The work around here is to user cron to automatically delete these messages from your log as they are harmless unless they fill your file system.
Cheers,
Rod
null -
Help on printing error messages to a log file
Hi, may I know whether is there any way to print the error messages to a log file? Thanks for your help!
noobboy,
Please refrain from crossposting all of your questions into multiple forums. You were asked to stop this the last time you did this as well. Please be more considerate in future. -
I have a problem with my iCal, when I use my caldav account, I can only see my own calendar on my MBA, on my co-workers MBP it works fine with both my account and his. My co-worker can't see other calendars than his own when he uses iCal on my laptop.
We can reproduce this problem on his computer by setting Location to Automatic rather than Amsterdam, then after deleting iCal's cache files, the caldav account and setting the Location back to Amsterdam solves the problem for him.
It does not solve the problem for me (or several other co-workers). We've been looking at this for a few weeks, and we can not find any clear pattern why certain machines have this problem and others don't.
All machines (both affected and unaffected) are running Mac OS 10.7.2 with iCal 5.0.1
I've spoken to Apple support over the phone (in the Netherlands), unfortunately, they couldn't help with this.
So far we've tried numerous location and language settings, but on affected machines nothing appears to solve the delegation problem (which we assume to be connected to the error messages iCal generates)
Starting iCal yeilds the following error messages in /var/log/system.log:
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=3
line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=10
line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 iCal[23884]: Unexpected EOF, returning last token as fallback
Jan 5 11:31:05 dhcp-91 iCal[23884]: VTIMEZONE does not match System Time Zone (Europe/Amsterdam) for 20100105T000000 to 20120105T000000: (
"interval: 2001-01-01 01:00:00 +0100, offset: 3600"
) != (
"interval: 2010-03-28 03:00:00 +0200, offset: 7200",
"interval: 2010-10-31 02:00:00 +0100, offset: 3600",
"interval: 2011-03-27 03:00:00 +0200, offset: 7200",
"interval: 2011-10-30 02:00:00 +0100, offset: 3600"
BEGIN:VTIMEZONE
X-LIC-LOCATION:Europe/Amsterdam
TZID:Europe/Amsterdam
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZNAME:CEST
TZOFFSETTO:+0200
DTSTART:19700329T020000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZNAME:CET
TZOFFSETTO:+0100
DTSTART:19701025T030000
END:STANDARD
END:VTIMEZONE
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=3
line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 [0x0-0x58f58f].com.apple.iCal[23884]: line 1,1: expecting FREQUENCE, found 'BYDAY' as token type 5
Jan 5 11:31:05 dhcp-91 iCal[23884]: iCalendar recurrence failure BYDAY=-1SU;FREQ=YEARLY;BYMONTH=10
line 1,6: unexpected char: '='
Jan 5 11:31:05 dhcp-91 iCal[23884]: Unexpected EOF, returning last token as fallback
Jan 5 11:31:05 dhcp-91 iCal[23884]: VTIMEZONE does not match System Time Zone (Europe/Amsterdam) for 20100105T000000 to 20120105T000000: (
"interval: 2001-01-01 01:00:00 +0100, offset: 3600"
) != (
"interval: 2010-03-28 03:00:00 +0200, offset: 7200",
"interval: 2010-10-31 02:00:00 +0100, offset: 3600",
"interval: 2011-03-27 03:00:00 +0200, offset: 7200",
"interval: 2011-10-30 02:00:00 +0100, offset: 3600"
BEGIN:VTIMEZONE
X-LIC-LOCATION:Europe/Amsterdam
TZID:Europe/Amsterdam
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZNAME:CEST
TZOFFSETTO:+0200
DTSTART:19700329T020000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZNAME:CET
TZOFFSETTO:+0100
DTSTART:19701025T030000
END:STANDARD
END:VTIMEZONE
And when I close iCal I get:
Jan 5 11:33:25 dhcp-91 [0x0-0x592592].com.apple.iCal[23894]: token mismatch: 4 != 5I'm seeing the same thing, and I can't even find where OS X stores calendars on disk anymore...
-
ERROR messages in /var/log/messages
Hi,
I encountered a error messages in /var/log/messages please find below
Dec 9 04:03:08 drs syslogd 1.4.1: restart (remote reception).
Dec 9 04:03:18 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:03:18 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:03:18 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:03:18 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:03:18 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:03:18 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:03:18 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:03:18 drs init: Id "h1" respawning too fast: disabled for 5 minutes
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs logger: Oracle Cluster Ready Services disabled by corrupt install
Dec 9 04:08:19 drs logger: Could not access /etc/oracle/scls_scr/drs/root/crsstart.
Dec 9 04:08:19 drs init: Id "h1" respawning too fast: disabled for 5 minutes
Dec 9 04:10:46 drs rpc.mountd: authenticated unmount request from 10.3.141.26:651 for /opt/backup_log/srv (/opt/backup_log)
Dec 9 04:10:47 drs rpc.mountd: authenticated mount request from 10.3.141.26:657 for /opt/backup_log/websrv (/opt/backup_log)
Dec 9 04:10:47 drs rpc.mountd: authenticated unmount request from 10.3.141.26:672 for /opt/backup_log/websrv (/opt/backup_log)
Dec 9 04:10:47 drs rpc.mountd: authenticated mount request from 10.3.141.26:677 for /opt/backup_log/ws (/opt/backup_log)
Dec 9 04:12:01 drs rpc.mountd: authenticated unmount request from 10.3.141.26:849 for /opt/backup_log/ws (/opt/backup_log)
Dec 9 04:13:20 drs logger: Oracle Cluster Ready Services disabled by corrupt install
and database (oracle 10g) is running fine, but i cant figure out what could be the problem, can anyone just help me out on this.
JafarHi,
#h1:35:respawn:/etc/init.d/init.cssd run >/dev/null 2>&1 </dev/null
by commenting above line in initttab file would stop messaging, is this would have any adverse affect on the database. As its a production server, so i am really taking time to resolve it. Your suggestions are welcome. If there is no harm in commenting the above line then i would go forward to comment that line.
Thanks
Jafar> -
ISA550 After upgrade 1.2.17 many error messages in the log
Hi,
After upgrade> 1.2.17 many error messages in the log
Hello,
after upgrading from 1.2.15> 1.2.17 have infinitely many errors in the log:
Err - System: sdsd: msgq_open: Error: mq_open () failed on msg queue / sdsd, errno = 2
Err - System: sdsd: open_control_msgq: Failed to open sdsd control message queue, errno = 2 (No such file or directory)
These errors occur repeatedly (300 times per minute). So I went back to the FW 1.2.15.
Does anyone have an idea?
Thanks and regards
ClausHi John,
Has this issue been resolved yet ?
I'm facing the same issue after upgrading to 1.2.18
11/11/2013 10:42 Error System sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42 Error System sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42 Error System sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22 Error System sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22 Error System sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43 Error System sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43 Error System sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 110
Please let me know how to make this go away.
What are these errors about anyway ?? What causing it ??
Thanks
Lutfi
2013-11-11 10:42:29
Error
System
sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
2013-11-10 12:42:59
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 12:42:59
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-10 12:42:58
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-10 00:22:57
Error
System
sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 00:22:57
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
2013-11-10 00:22:56
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-09 18:43:17
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-09 18:43:16
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-09 18:43:16
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 11011/11/2013 10:42 Error System sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42 Error System sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42 Error System sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22 Error System sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22 Error System sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43 Error System sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43 Error System sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 1 -
I'm using ACS V4.2 to authenticate wireless users using EAP-TLS. I get the following error message in my logs for some users. Anyone have any idea what it means?
AUTH 02/16/2009 11:10:16 I 2310 2008 0x277 External DB [NTAuthenDLL.dll]: Insufficient space for all of user [email protected] certificates
AUTH 02/16/2009 11:10:16 I 2355 2008 0x277 External DB [NTAuthenDLL.dll]: User '[email protected]' was found [ADS]This isn't supposed to be an error message, but rather an informational message.
Do you see any Failed authentication attempts when this message showed
up? -
Revision: 8910
Author: [email protected]
Date: 2009-07-29 14:22:26 -0700 (Wed, 29 Jul 2009)
Log Message:
Bug: LCDS-936 - Should have better error message in servlet log if server in services-config.xml is configured to use wrong class.
QA: Yes
Doc: No
Checkintests: Pass
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-936
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.javaAfter many hard working days.i finally found the error cause,i needed to make weblogic datasource also ADF doesnt work on internet explorer browser,it works on safary.hope it helps somebody
-
IFS very slow and giving error message in jserv.log
Getting the error message in jserv.log
=public
[05/06/2001 08:08:51:181] (EMERGENCY) ajp12[1]: cannot scan servlet headers (50
0)
[05/06/2001 08:08:51:182] (ERROR) an error returned handling request via protoco
l "ajpv12"
I have tried changing a lot of stuff in both the jserv.properties, jserv.conf, zone.properties and in IFS configuration files .If possible, connect to your router with Ethernet and turn off Wi-Fi. Any difference?
-
Revision: 11683
Author: [email protected]
Date: 2009-11-11 20:33:57 -0800 (Wed, 11 Nov 2009)
Log Message:
Clarifying error message for framework logging level.
QE notes: N/A
Doc notes: N/A
Bugs:
SDK-23699 - Incorrect error thrown when you use the level LogEventLevel.ALL with ILogger.log()
Reviewer: For Paul
Tests run: Test case
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-23699
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/bundles/en_US/logging.properties -
How to send a job log/Spool once the job completed?
Could you please help me how to send a job log/Spool once the job completed.
There was an option is available System Send mail to send a mail once the job completed . So could you please help me how we can send a job log using this option .
I have tried the below but i didn't get any mail . Could some one help this please !
For example :
Job chain name : Test_spool
Step1 : Reportstep
Job definition u2013 XXX_YYY
Step2: Mailstep
Job definition: system_mail_send
Expression : Reportstep,job<(what i need to mention here )>:reportstep/log.txt
Check the ablove mentioned is correct and correct me , still i didnu2019t get the log in the mail please .
Thanks
RamkumarHi Ram,
I need your help on getting mail alert with log file.
here is how i have provide the parameter valure for job definition: system_mail_sent.
Step1 with one job1 and step2 with one job1
In step2 , i have included the job definition to send mail. with below parameter.
Relative Job: Step 1, Job 1
Job File: step 1, job 1: step 1/log.txt
Please let me know if the above method is correct or not.
NOTE: mail server and from address are configured.
Thanks,
Karthik -
When I attmpt to synch my Iphone I get the following error message. "Itunes was unable to load data class informationfrom synch services. Reconnect or try again later. This started after I uddated to the latest version of Itunes. What should I do?
My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade.
Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down. Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
Still: Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?! Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake).
**banging head on table** -
When using Abobe Reader 11.0.6 in Windows XP, I get an error message saying "Prop Res DLL not loaded" when I try to print anything.
Wow, what an ordeal. First tried running the cleaner, then
re-installing 11.0.6 -- didn't work (and that was after several attempts
at reinstalling the Lexmark printer drivers and associated utilities,
which didn't help either).
Then tried a system restore to last week, when the print was working OK.
-- Didn't fix it.
Then tried cleaning and restoring 11.0.6 -- didn't work.
Then tried cleaning and restoring to version 10. Now printing works
fine and system seems back to normal.
Apparently, 11.0.6, which was working fine for a while, didn't like some
other system update, but version 10 is not bothered by that.
Thanks for your continued help and interest -- without your link to find
option for installing older versions, I'd still be stuck.
Jon Fuhrman -
Im Using Windows 7 Ultimate. I Uninstall My Firefox Then I Want To Install It Back But When I Install It, I Got This Error Message "Your Firefox profile cannot be loaded. It may be missing or inaccessible. "
I Try To Delete profile.ini But " Access Denied " . How To Fix It ?Tq Philip. You Save My Day. :)
-
PI 7.11 - confusing error messages in the Default Trace
Hello,
Every day, I see these error messages pop up in the default trace ( all with location System.err ):
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:55)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:57)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:977)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:41)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:67)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:69)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:355)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:60)
at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:803)
.... and many others.
It all seems to start with this error:
java.util.regex.PatternSyntaxException: Unexpected internal error near index 16 number_of_nodes\
They all appear just once a day and all at the same time.
I already looked for possible causes or background jobs, but nothing...
Can anybody give me a suggestion?
Thanks a lot.Hi Kevin,
indeed....You need to apply the following SAP Notes:
1749574 - Checking for the latest Configuration Wizard patch
1927916 - Registration of Mbean:ConfigurationExportKMC DefaultTrace
Afterwards restart J2EE engine. This helped in my case.
Best Regards
Harald
Maybe you are looking for
-
Hi All, All my Arun settings are done. I have a release rule set for 100%. And when my item can not be fulfiiled with batch stock or in other words only partial batch stock is available, and wehn I run Arun, teh requirement gets resrved. Later, once
-
Trouble exporting photos from iPhoto directly to a flash drive
Hi, When I exported 7 photos from my iPhoto library, all marked JPEG, directly to my 256MB Memorex flash drive (first time of usage), a strange thing happened. When I opened the flash drive on my computer, 5 photos showed up visually showing the imag
-
Why are my NEF files appearing faded and dull?
Just purchased ps cs4 and I'm totally new to it having used capture nx2 before now, but I don't understand why my nef files are coming out so faded and low in contrast? When I download from the camera and when I download via Nikon transfer. The files
-
Feature Request: 7d Mark II - Add option to show compass direction in viewfinder.
Please add option to show compass direction in the viewfinder display.
-
I work with a large company in Burbank, California and we are currently providing video content on Dbeta to affiliates and news organizations. Earlier this year we started providing the same content over the internet. The end user can sign on and dow