Confusing information about expanding iMac 2.3

hi,
there are confusing information about expanding my white iMac 2.33 GHz. I want to change the RAM configuration. Today the Mac contains 2x 1GB RAM (DDR2 SDRAM 667 MHz).
Apple says I can go up to 4GB - but only use 3GB. Is there anyone using 4GB in the same computer?
Which specification is the right one PC-5300 or PC-5400. This information confuse me, too.
http://support.apple.com/kb/HT3011?viewlocale=de_DE
or
http://support.apple.com/kb/HT2821?viewlocale=de_DE
Any answers or comments?
THANK YOU!

Your imac should be the one on the right in the tech specs here (upgraded to the 2.33 GHz), which is essentially the same as mine except for the upgraded processor:
http://support.apple.com/kb/SP28
Yes, you can put a total of 4 GB in there, but from what I've read here, it will only recognize about 3.2 or so of the RAM, so I decided to simply go with a total of 3 GB and it is running well. So you could just replace one of the 1 GB sticks with a 2 GB stick. And, according to the specs, it is the PC-5300.

Similar Messages

  • Information About My iMac Computer??

    Add External eSATA Port
    am i'm allowed to use an External eSata Drive for My iMac Computer? cause i need more Storage but my Memory is in good Standards & where can I Get an External eSata Drive from? I Went to OWC.com & I Contacted them on Twitter & they told me that I Can use there iMac Turnkey Service and add more than one drive :-)
    so can I Really use an External eSata Drive or port or whatever it's called on my iMac Computer, I Told them i had an 2009 24inch Apple iMac Computer & i told them i don't know how to install Hard Drives cause i never done it before so i'm a little scared to do it? so i had to ask this question??
    or what kind of Hard Drive I Can put in My 2009 24inch iMac Computer, i'm looking for a 2TB Drive? & will The Apple Store install it for me?

    The Apple store won't install it, but an authorized service provider will. That is if you want to replace the internal hard drive you have now. The only other way (and only on some models) would be that they take out the Super Drive and put another hard drive in there. Not worth it with the age of your computer, Byron.
    Much better (and cheaper): get another external hard drive and park all your movies, etc. there and get them off your internal drive. Here are some good ones from OWC:
    http://eshop.macsales.com/shop/firewire/EliteALmini/eSATA_FW800_FW400_USB
    You can't use an eSata drive because your Mac doesn't have an eSata port and, again, considering the age of your machine, it is not worth adding that expense. Firewire 800 will work just fine.
    And PLEASE - do not even think about taking apart your iMac - only people who are used to this kind of stuff should do it. There are many many parts inside to remove. Here are some photos:
    http://news.cnet.com/8301-13506_3-10210484-17.html
    This is a job for a professional!

  • HT202696 FIND Technical information about imac by serial number

    I would like to know if it is possible to find technical information about my iMac using its serial number as I do not know what year it was produced.

    You can check that by clicking on the Apple logo on the top left and then clicking on About This Mac. You will get all your information about your iMac there.
    Alternatively, you can check it by posting your serial number on Apple's website:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • Nation advanced search on my IMac, which I think is a spyware. When I want wo go to google chrome it redirects me to this ominous nation search engeen. Has anybody got some information about it and how I can get rid of

    I just caught a thing called nation advanced search on my iMac computer, which I think is a spyware. When I want wo go to google chrome it redirects me to this ominous nation search engeen. Has anybody got some information about it and how I can get rid of it? What does can it do to my data and is it really a spyware? I just found information in youtube, that it is a spyware, and that it has to be removed, but the information they give for the removal is just working for PCs not for Macs.
    Please help!

    Thank you all for the friendly assistance provided.
    I have found a solutiton to the problem I was having.  I hope that many more can benefit from the information I will provide.
    I started at Finder, then went to GO selected COMPUTER and then Machintosh HD, then Library, Scripting Additions folder and trashed all that was there. This is what worked for me, if you choose to not delete your content its up to you.  Happy Computing.
    God Bless!!
    This solved my question 

  • How to get information about PowerPivot options

    I was going through the Custom Xml structure present after unzipping a PowerPivot enabled excel file.
    My main motive is to extract information pertaining to PowerPivot options present in the Excel File.
    It had around 16- 19 Custom Xmls, I had a little confusion and it would be great if you could help me on this :
    1. In the workbook.xml.rels file, there is entry for each Cutomxml file. For ex. –
    But according to my interpretation, each of these entries must be referenced also. What i mean is that the specific Rel ID i.e. rId30 (for the above entry) must be referred somewhere in the package that is why it is mentioned in the Workbook.xml.rels.
    But i couldn’t find it anywhere. So how does Excel does all the mapping that which Custom XML is referred to?
    2. I found out that for each table in the PowerPivot window, there is a Custom XML present in the Custom XML’s folder.
    But, there are other field also present such as ‘ColumnFormat’, ‘ColumnNegativePattern’, but these are not getting updated whenever I am changing these for any table.
    I can get the Column names of the table but how can i find out what Format has been applied to the Column of the tables.
    3. Moreover, I found a bunch of Custom XML’s but couldn’t really make sense out of them that what they were pointing to.
    For ex. – CustomXml with namespace – Gemini xmlns=”http://gemini/pivotcustomization/a1265ca3-5c9c-4281-be48-a1a026385b0a”
    or “Gemini xmlns=”http://gemini/pivotcustomization/IsSandboxEmbedded””
    It would be highly beneficial if you can help with these namespaces and their interpretation.
    4. I understand that majority information is present in the database i.e. Item.data file and also in the Temp folders when the file is opened.
    I got through some files present in the Temp Folder and could get my hands on information about Column Format, Formula in case of Calculated Columns. But how do I find out the exact path for the Temp folder every time I open the file.
    I could find some paths in the Item.data file in the BackUpFile nodes but those didn’t exist.
    So is there is any way by which I can get those paths.
    Sorry if the query is a little long, but I am actually stuck with the above questions acting as bottleneck.
    Thanks a lot!!
    Sahil Puri

    What version of Power Pivot are you on?
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • EtreCheck version: 2.1.5 (108) Report generated 4 January 2015 14:29:26 GMT  Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adware

    My Mac is very slow and applications take a long time to load, especially Safari and iTunes.  Please help.    I have run the Etrecheck report and these are results.
    Thanks Pat
    EtreCheck version: 2.1.5 (108)
    Report generated 4 January 2015 14:29:26 GMT
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      iMac (21.5-inch, Mid 2011) (Verified)
      iMac - model: iMac12,1
      1 2.7 GHz Intel Core i5 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 0/DIMM1
      empty empty empty empty
      BANK 1/DIMM1
      empty empty empty empty
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      AMD Radeon HD 6770M - VRAM: 512 MB
      iMac 1920 x 1080
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:32:50
    Disk Information: ℹ️
      ST31000528AS disk0 : (1 TB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      OPTIARC DVD RW AD-5690H 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Seagate Expansion Desk 2 TB
      EFI (disk1s1) <not mounted> : 210 MB
      Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. iPhone
      Apple Internal Memory Card Reader
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
    Problem System Launch Agents: ℹ️
      [failed] com.apple.syncservices.SyncServer.plist
    Launch Agents: ℹ️
      [loaded] com.avast.userinit.plist [Support]
      [running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
      [loaded] com.epson.esua.launcher.plist [Support]
      [running] com.epson.eventmanager.agent.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
      [running] com.trusteer.rapport.rapportd.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.avast.init.plist [Support]
      [loaded] com.avast.uninstall.plist [Support]
      [failed] com.avast.update.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [running] com.trusteer.rooks.rooksd.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.avast.home.userinit.plist [Support]
      [running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
    User Login Items: ℹ️
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
      DivXBrowserPlugin: Version: 2.2 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      OVSHelper: Version: 1.1 [Support]
      QuickTime Plugin: Version: 7.7.3
      JavaAppletPlugin: Version: Java 8 Update 25 Check version
    Safari Extensions: ℹ️
      wrc [Installed]
    3rd Party Preference Panes: ℹ️
      DivX  [Support]
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      GoToMyPC Preferences  [Support]
      Java  [Support]
      Trusteer Endpoint Protection  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
      Destinations:
      Seagate Expansion Drive [Local]
      Total size: 2.00 TB
      Total number of backups: 78
      Oldest backup: 2013-07-28 18:09:06 +0000
      Last backup: 2015-01-04 14:29:38 +0000
      Size of backup disk: Adequate
      Backup size 2.00 TB > (Disk used 281.84 GB X 3)
    Top Processes by CPU: ℹ️
          2% WindowServer
          1% mds
          0% fontd
          0% mds_stores
          0% com.avast.daemon
    Top Processes by Memory: ℹ️
      120 MB Safari
      112 MB com.avast.daemon
      94 MB com.apple.WebKit.WebContent
      56 MB spindump
      52 MB mds_stores
    Virtual Memory Information: ℹ️
      479 MB Free RAM
      1.56 GB Active RAM
      1.11 GB Inactive RAM
      904 MB Wired RAM
      5.37 GB Page-ins
      75 MB Page-outs
    Diagnostics Information: ℹ️
      Jan 4, 2015, 01:57:18 PM Self test - passed
      Standard users cannot read /Library/Logs/DiagnosticReports.
      Run as an administrator account to see more information.

    patbythesea wrote:
    Can I assume that with my Mac I do not need any additional virus protection software?  If I do, what should I use?
    See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • I have an old iMac version 10. 4.11 and I have the iPhone 3GS which I cannot upgrade the latest applications I want to buy the iPhone 4S but I need to back up all the information on my iMac and move it to a different computer contacts songs etc which is t

    I have an old iMac version 10. 4.11 and I have the iPhone 3GS which I cannot upgrade the latest applications I want to buy the iPhone 4S but I need to back up all the information on my iMac and move it to a different computer contacts songs etc which is the easiest way to do this

    Glenn,
    I tried upgrading to leopard, even bought the software and brought it home but it wouldn't let me. So i went back to apple, gave them the specifications of the machine and been told my machine is simply too old for leopard. This is incredible to me because it really isn't THAT old (i think just a little over 6 years maybe) and yet i'm left out on the curb when it comes to using newer apple products. I understand technology moves on but the mindset that i am supposed to dump a perfectly working machine after a couple of years or face not being able to use any other apple product is counter to what thought apple was about.

  • Provide information about handling units

    Plz provide information about handling units. Explain all the paths and information about HU.

    Hi,
    Purpose
    You can use Handling Unit Management (HUM) to reflect packing-based logistics structures in the SAP System. Using this method, you track the movements of entire handling units and the materials they contain rather than tracking each material individually.
    When you base logistics processes on handling units, goods movements processing is made easier, which in turn optimizes all logistics operations. This simplified processing includes the existing packing function in shipping and warehouse processing in the Warehouse Management system, which is expanded here.
    Features
    In the system, the handling unit (HU) expands on the shipping unit. Handling units can be nested, which means that you can create new handling units from several handling units as often as you like. At the material item level, HUs contain the complete material identification, the quantity, and, in the case of serial numbers, the respective object list. Handling units have unique, scannable identification numbers that can be developed according to standards such as EAN 128 or SSCC.
    Handling units contain all inventory management information of the materials they contain that are maintained in Inventory Management. There are also status messages that you can call up at any time that indicate whether a handling unit is only planned or if the ship-to party has been notified of the arrival of this handling unit, or whether it is in the warehouse or has already been posted to goods issue. The integrated history function also records each business process in the life cycle of each handling unit, meaning that you can track the handling unit’s path and development at any time.
    In HU-managed storage locations, all goods movements are executed through the specification of the respective HUs, and Inventory Management is performed through the handling units. If you are not working with HU-managed storage locations, you can use handling units (without stock information) as before in the delivery and in the shipment.
    In HU-managed storage locations, materials can be managed in HUs only. Mixed stock (stock made up of packed and non-packed materials within the same storage location) is not supported. HUs can also be managed in interim storage types. Unpacking a material from an HU means that the stock of the material is posted to a storage location that is not HU-managed.
    If you call up normal material movements in connection with an HU-managed storage location, a delivery is created, rather than a direct material posting, which has been the procedure up to this point.
    Handling units are unique at client level in at least one system. Using an indicator at client level (see Unique Identification of Handling Units), you can control whether you are going to work with the HU functions. Since the handling unit is a physical unit, the central logistics processes are controlled through the input of the handling unit identification. These processes include putaway, picking, and stock transfers, as well as goods receipts and goods issues.
    A handling unit’s mobility can be limited if quality checks are active. Changes in the stock category caused by a quality inspection are made using a posting change in the handling unit.
    There is also a report available that you can use to find and display handling units using different selection criteria such as material, packing instruction, or storage location.
    Although the handling unit is basically a unit that remains constant in the system, you can change it by repacking the materials it contains. All the packing functions, such as packing, repacking, and unpacking, are completely supported by the handling unit function. In this way, handling units can be created in production, during goods receipt, or in the packing areas of the warehouse. If you have automatic packing, the handling unit is created from the packing proposals defined in the system (from the packing instructions, for example).
    Regards
    Adarsh Mathur

  • How do you send information about whether you've received and read a message on messages?

    Apparently there is a feature where you can either show or hide when you are sending information about whether you have read a message and when you are typing. Where can I access these features?

    Hi,
    You will see a checkbox for "Send Read Receipts"
    When you have the iMessages account as the Listed/highlighted Account.
    You can also Auto reply with the Away Message in any other account (Mostly AIM based)
    Go to Messages > Preferences > Messages section and tick the box at the bottom "Auto Reply with My Away Message"
    Of course you have to set an Away Setting (with or without a Messages) for it to be sent. (it is better though of you choose or create an actual message)
    9:16 PM      Sunday; September 9, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

    Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
    I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
    Thanks.
    laci

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • ANOTHER Question about my iMac G3. Mac OS X and RAM

    Hey, I have ANOTHER question about my iMac G3.
    I know that I'm supposed to have the latest firmware updates for my iMac G3 running OS 8.1, which I do, but I read some where these firmware updates could only be updated if you're running OS 9.2. Yet when I run the firmware updater, it says my firmware is up to date. I just wanted to make sure this was correct because I just ordered an OS X 10.2 CD today, and I don't want my mac to be "dead" when I install it.
    My next question is how much RAM can my mac hold. It's an iMac G3 with a 233 mhz processor, if that makes a differemce.
    Again, thanks to the people who have helped me with my first Mac.

    hi there--
    unfortunately you require system 9.1 or 9.2 for the required firmware update 1.2 for your computer http://docs.info.apple.com/article.html?artnum=86117. so you'll have to install that if you want to install 10.2. it may work for you for a little while, but then you could possibly lose all your information. so i wouldn't advise attempting installing 10.2 without the correct firmware. [ : ) ]

  • How to get information about creation of a virtual machine on a Hyper-v host.

    Hi,
    How to get information about creation of a virtual machine on a Hyper-v host?
    I need: host name, time created, creator user.
    I saw in Hyper-V-VMMS but I found info about movements of VM between hosts.
    Thank's in advance.
    Denius Valiant

    For Host Name * Created Time Use This Command In PowerShell 
    Get-VM -Name (Read-Host "Type Your Vm Name") |select CreationTime , ComputerName
    and for Create User , As i know you should see on Event Log . 
    Go To Event Log Viewer--->Applications And Services Logs--->Microsoft--->Windows--->Hyper-V-VMMS--->Operational 
    You can see in Event Log who create the Vm.
    Whenever you see a helpful reply, click on Vote As Helpful & click on
    Mark As Answer if a post answers your question.
    LinkedIn:
      Facebook:
      

  • A PDF document with information about activation for CS6 software

    Here's a PDF document with information about activation for CS6 software.
    I found it very useful for understanding how the system worked for activation of perpetual licenses, both in cases where the computer is and isn't connected to the Internet.

    Ann, with some browsers, the PDF document will download in the background rather than appear in a browser window.

  • I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

    I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
    In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
    <B>DESCRIPTIONS</B>:
    This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
    <B>INSTRUCTIONS</B>:
    1. Run the VI.
    2. On the <B>DAQ Configurations</B> tab, specify the <B>sample rate</B>, <B>samples per channel</B>, device and channel configurations, and tachometer channel information.
    <B>NOTE</B>: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
    3. Switch to <B>Extract Even Angle Reference</B> tab. Specify the <B>number of samples to acquire</B> and the <B># of revs in reference</B> which determines the number of samples in even angle reference. Click <B>Start</B> to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in <B>Even Angle Reference</B>.
    4. Switch to the <B>Remove Slow-roll Errors</B> tab. Click <B>Start</B> to acquire data continuously and view the compensate results. Click <B>Stop</B> in this tab to stop the acquisition.
    <B>ORDER ANALYSIS VIs USED IN THIS EXAMPLE</B>:
    1. SVL Scale Voltage to EU.vi
    2. OAT Digital Tacho Process.vi
    3. OAT Get Even Angle Reference.vi
    4. OAT Convert to Even Angle Signal.vi
    5. OAT Compensate Even Angle Signal.vi
    My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
    Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
    Solved!
    Go to Solution.

    Hi CracKatoA.
    Take a look at the link bellow:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
    Regards,
    Filipe Silva

  • How do I use my serial number to find information about my MacBook Pro's Processor and RAM?

    So I want to find information about my MacBook Pro's processor and RAM using the serial number because the MacBook no longer works. I remember being able to find this information on the apple website before, maybe by using the coverage checker. Did they take this information out of the coverage checker? Is it no longer possible for a costumer to obtain this information?

    Append the last three characters of it to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
    This won't reveal how much RAM it currently has installed.
    (117541)

Maybe you are looking for

  • This application has failed to start because msvcr71.dll was not found

    Hi, I just downloaded the Flex 3.3 DK from here: http://www.adobe.com/cfusion/entitlement/index.cfm?e=flex3sdk Once unzipped I went to run this: C:\DATA\My Documents\_jim\flash\open-source\_Software\flex_sdk_3\bin\mxmlc.exe When I ran it, I got this

  • Newbie question about entity and view objects

    Hi everyone, My first ADF application in JDeveloper is off to a difficult start. Having come from a forms background, I know that it is necessary avoid using post-query type lookups in order to have full filtering using F11/Ctrl+F11. This means creat

  • How do i start up from the dvd drive on an imac

    Just got a 27 imac  os x 10.6. tried to migrate from my macbook pro os 10.5.8.   migration by ethernet with the 2 connected to each other only. Migration failed after over an hour. so i clicked cancel migration waited another hour nothing happened so

  • "Lexmark Z33" on OS 10.5 / foomatic?

    Help! I finally upgraded to 10.5 but just found out Lexmark discontinued support on the Z33 printer, I don't understand why because it's such a common printer, i know plety of folks who use it. It can't be too difficult ot develop new printerdrivers

  • Tethering iphone 3g to ipad2

    I have a iphone 3g with ATT tethering option. I am trying to tether from iphone 3G to my ipad2 using bluetooth and it does not work. Is this possible or not ?