Confusion in IDOC scenario

Hi,
I have the following IDOC scenario:
A non-SAP system sends via TRFC an IDOC to XI -> SAP. I want to keep it simple as possible.
What scenario is that according to the SAP document "How to... Sample IDOC-XI Scenarios"?
I thought this would be scenario 1 (LS<->LS). Is that correct? But can I maintain in transaction IDX1 a port to the non-SAP system and load metadata with transaction IDX2 (that is not possible)????
The non-SAP system and the target SAP system have logical system names maintained in the SLD. The adapter-specific-identifiers are populated.
In the sending system the field EDI_DC40-SNDPR in the message header is populated with logical system name of the non-SAP system (e.g. XYZ).
But the trace of the non-SAP systems returns the following error message:
RFC_ERROR_SYSTEM_FAILURE
Transaction IDX1: Port XYZ, client 100, RFC destination contain errort
I have added the port in IDX1 for XYZ, but the same error message is coming. Of course transaction IDX2 is not possible...
How can I check error messages of the idoc-adapter within XI?
What is problem?
Thanks!

Hi Chris,
>>a port to the non-SAP system and load metadata with transaction IDX2 (that is not possible)????
maybe you can try a little trick:
- in idx1 create a port for your non SAP system
and but use the destination to your normal R3
- then in idx2 import manually idoc metadata (Create option) for your non sap system (but you'll be importing from R3 RFC dest)
then just change the RFC dest in IDX1 from the one pointing to R3 to your non SAP system
I don't know if this will work but maybe it's worth to try
BTW
when you test your RFC dest to your non SAP system does it work? is it R/3 (3) type?
Regards,
michal

Similar Messages

Partner Profile for file to IDOC scenario

Hi experts,
I am doing file to Idoc scenario. I did the ALE configuration steps between XI and r/3. For sender (ThirdParty) system, I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
Thanks
Manoj

Hi,
>>I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
in most cases you will only use one logical system in WE20
this will be XI's logical system - and you can route all the traffic
via this logicail system - this is the most popular case
for more about IDOCs and XI have a look at my book:
Mastering IDoc Business Scenarios with the SAP XI
http://www.sap-press.com/product.cfm?account=&product=H1935
Regards,
Michal Krawczyk
http://mypigenie.com - XI/PI FAQ

Idoc Scenario Partner type not LS

Hi experts ,
we have gone through https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a&overridelayout=true for idoc scenario where idoc partner type is not a logical system .Now we are working on case2 scenario in above document.we have some confusion in the configurations at R/3 side.Can somebody explain the step by step configuration at R/3 side.
Thanks.

Hi Mark,
For your requirement you, create partner profile for LS with following steps :
Create New Partner profile and give your respective TY (User Type), Agent & Language and then follow maintain following parameters under Outbound Parameters :
Message Type : INVOIC
Under Outbound Option u2013 Tab
Receiver Port : <Mention your receiving port here, to create Receiver port you have to go to WE21 transaction>
Pack Size : 1
Transfer IDoc Immediately (Select)
Basic Type : INVOIC02
Cancel Processing After Syntax Error (Select)
Under Message Control - Tab
Application : V3
Message Type : RD00
Process Code : SD09
Hope, your problem will get resolve.
Regards..
Imran

ALE Settings For File-IDOC Scenario

Hi All,
While Doing IDOC-File Scenario we have to do the Following Settings
In XI
1) Create RFC Destination towards R/3
2) Create Port
3) Load Meta data
In R/3
1) Create RFC Destination towards XI
2) Create Port
3) Create PF
Q1) Coming to File-IDOC Scenario do we need to do the Same Settings ????
Q2) In this File-IDCO Scenario do we need to create RFC Destination in R/3 towards XI ????
Clarify me these Confusions
Regards
Bopanna

HI,
for IDOC TO FILE
We need to create the rfc destination at XI side so as to send the acknowledgement to sap r/3 as soon as idoc has been received.This is the reason WHY WE NEED RFC DESTINATION AT XI SIDE
There are are only 2 major difference in Ale settings for FILE TO IDOC AND IDOC-FILE
i.e for FILE-IDOC
1) No need to Distribute the modal view
2) For partner profile Specify the INBOUND PARAMETERS
FOR STEP BY STEP U CAN SEE THE SETTINGS GIVEN BELOW
We need to do the following settings in XI
1)   Create an RFC Destination to the Receiving System in transaction code (SM59)
a)   Choose create
b)   Specify the name of the RFC destination
c)   Select connection type as 3 and save
d)   In the technical settings tab enter the details SAP SID/URL and system number#
e)   Enter the Gateway host as same details above SID/URL
f)   Gateway service is 3300+system number#
g)   In the Logon /Security tab, enter the client, user & Password details of Destination system
h) Test the connection and remote logon.Both should be succesful
2) Create Port Using Transaction Code IDX1
a)   Select Create New button
b)   Enter the port name as SAP+SID (The starting char should be SAP)
c)   Enter the destination client
d)   Enter the RFC Destination created in XI towards R/3
e)   Save
3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1
                    SETTINGS IN SAP R/3
     We need to do the following settings in R/3
     Logon to Sap R/3 System
1)   Create an RFC Destination to XI in transaction code (SM59)
a)   Choose create
b)   Specify the name of the RFC destination
c)   Select connection type as 3 and save
d)   In the technical settings tab enter the details SAP SID/URL and system number#
e)   Enter the Gateway host as same details above SID/URL
f)   Gateway service is 3300+system number#
g)   In the Logon /Security tab, enter the client, user & Password details of Destination system
h)   Test the connection and remote logon.Both must be succesful
2)   Create communication Port for Idoc processing Using Transaction(We21)
a)   First Select Transactional RFC and then click create button
b)   Enter the destination port name as SAP+SID (The starting char should be SAP)
d)   Enter the RFC Destination created in SAP R/3 towards other system.
e)   Save
3)   Create Partner Profile with Inbound Parameters (WE20)
a)   Create New
b)   Create the Partner no. name as same the logical system name of the destination system
c)   Select Partner type LS
d)   Enter details for Type: US/USER, Agent, and Lang
     Then Save
e)   Select Partner no. and LS which were create above
f)   Now we have to give some Inbound Parameters.So click on ADD TO Create Inbound Parameter
g)   Select Message type
h)   Double click on Message Type and Then Enter the details for Message Type and Process Code.
I)   save
4)   In Transaction SALE, Create Logical System
a). Go to Basic Settings-> First Define logical systems
     and then assign logical systems
b)   Double click on Define the logical systems
c)   Give data for your Logicaal System and Name
d)   Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
e)   Assign the logical system name to the client
ALSO WE NEED TO CONFIGURE THE IDOC ADAPTER AS RECEIVER TO CONVERT THE IDOC-XML TO IDOC
PLZ REFER THE LINK BELOW.
PLZ REWARDS THE POINTS
VIKAS JAIN
                                                                                [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098]
Edited by: vikas jain on Jan 22, 2008 11:49 AM

Error while executing a JDBC to Idoc scenario : No standard agreement found

Hello SAP PI Gurus,
I am having a JDBC to idoc Scenario .And the interface is running at 10 min of duration.
<SAP:AdditionalText>No standard agreement found for ,
BS_EXT_CTBSREPDB, , BS_ERPQAS_QE1_320, http://XYZ.com/FI/FI_FI_01/Charges, FIDCC2</SAP:AdditionalText>.
While i test the configuration...i get an error in reciever agreement as mentioned above.
Can you pls help me in resolving this issue.
Regards,
Ravi

Hi,
I think the problem is with namespace....for IDOC the namespace will be "urn:sap-com:document:sap:idoc:messages"...but in your case it is different.....i.e http:....etc.....please check whether you 've used the same IDOC withe above mentioned namespace in all the configuration objects like interface determination, receiveragreement etc.....
Thanks
Priyanka

Idoc-XI-Idoc Scenario

Dear All,
I am working on Idoc-XI-Idoc scenario in which I am getting ORDRSP Idoc in input. In one of its segment I am getting value as either A or B. If value is coming as A in input then in the output we want PORDCR101 Idoc but if we have B as value in the source idoc then we should have multiple PORDCR102 Idocs ie for each line item there will be different idocs.
Please guide me on how we can implement BPM in this scenario as required two MM i have created and they are working fine.
Regards,
NJ

Hi,
If value is coming as A in input then in the output we want PORDCR101 Idoc but if we
have B as value in the source idoc then we should have multiple PORDCR102 Idocs ie for
each line item there will be different idocs.
For Source = A:
SourceField----
-----equalS ----ifwithoutElse ----then Constant(blank) ---> PORDCR101
Constant(A)---
Assuming that A in input then in the output we want PORDCR101 Idoc means that you need only one occurence of the IDOC
For Source = B:
SourceField----
-----equalS ----ifwithoutElse ----then LineItem ---> PORDCR102
Constant(B)---
Regards,
ABhishek.

XI 3 File to IDoc scenario - Still referencing Old Logical system

Hi
Dont know if you can help. I have a file to idoc scenario using XI 3 to R/3 4.6c system.
I had the interface working from a third party system XMLHUB to SAP R/3. The Logical system name for the XMLHUB was XMLHUB01 in the SLD which I have set up as a partner profile in R/3. I have recently changed the logical system name to XMLHUBDEV01 in the SLD and created that logical system in R/3 and changed the partner profile to XMLHUBDEV01.
Unfortunately in the sender information of the IDoc the partner number is still XMLHUB01 and not XMLHUBDEV01. I don't understand where this partner is sent from to get into the control record of the IDoc.
I have cleared the SLD cache in both the Repository and the directory. Is there somewhere else I should be looking? Any help would be appreciated.
Regards
Daniel

hi daniel...
this thread wud answer ur query....
Re: IDOC Payload
regards..
vishal

Issue in IDOC-XI-IDOC scenario

Hi,
We are facing a strange issue in an IDOC-XI-IDOC scenario. We are using a SAX parser to parse the code here.
The error we are getting in 'sxmb_moni' is
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/abc/def/dev/sapxi/clfmas/Idoc2IdocMapperCLFMAS</SAP:P1>
<SAP:P2>java.lang.RuntimeException</SAP:P2>
<SAP:P3>For input string: ""</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/abc/def/dev/sapxi/clfmas/Idoc2IdocMapperCLFMAS a java.lang.RuntimeException was thrown: For input string: ""</SAP:Stack>
The strange thing is, when I restart the message, it gets processed successfully. Also, when I copy the payload, and test the same on a different environment, it gets processed successfully.
Would really appreciate some pointers here!
cheers,
Prashanth

Hi,
This related to mapping error check it once again.Check in Interface mapping Test tab.see the result.check the sxmb_moni and get the source of mapping come back to interfcae mapping and test .
See the below links
Hi I got EXCEPTION_DURING_EXECUTE in RWB->Message Monitoring
I am getting MAPPING EXCEPTION_DURING_EXECUTE
EXCEPTION_DURING_EXECUTE- Error in Mapping. Doubt about IE and AE
EXCEPTION_DURING_EXECUTE
Mapping problem - EXCEPTION_DURING_EXECUTE
ERR: EXCEPTION_DURING_EXECUTE while using FILE CONTENT CONVERSION
Regards
Chilla..

Error in IDOC-XI-IDOC scenario

Hi folks,
Let me explain the issue. This is an IDOC-XI-IDOC scenario. No BPMs involved. SAX parsing used to parse the IDOCs.
We had around 35000 IDOCs coming in from Brazil system, and they are all stuck in SMQ2 (Inbound queue) in XI. The first message of every queue is in SYSFAIL status, with the status text as Problems found during the EXPORT to specified keyin table.
When I try to execute the queue manually, nothing happens, but an error comes at the bottom of the screen, saying Function module does not exist or EXCEPTION raised.
I checked the dump on ST22, and it shows 130 runtime errors yesterday. The name of the runtime error is EXPORT_TABLE_UPDATE_CONFLICT.
In the what happened? part of the dump, it says Error in ABAP application program. The current ABAP program CL_XMS_PERSIST=============CP had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program.
Even SXMB_MONI is not opening (for yesterdays date). When I try to open it, it hangs for a long time, and finally opens an ABAP Runtime Errors page with the runtime error titled as SNAP_NO_NEW_ENTRY and the error short text as Runtime error: Unable to write short dump
Please advise.Thanks a ton!
cheers,
Prashanth

Hello Prashanth,
First of all this is an XI issue and belongs in that forum.
The export problem is typical to situations where your XI DB is out of space/out of table space. Please check with your Basis team.
Function module does not exist or EXCEPTION raised- This message is a standard ABAP RFC message. For an RFC function call to succeed, you need the same RFC function to exist on both systems. However this is probably not the case- it is more likely that you're out of DB space as I already wrote.
Good Luck (don't forget to award points)
Ofer

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Deleting data from a table(JDBC to IDOC scenario).

Hi,
For JDBC to IDOC scenario, the requirement is as explained below:
1: There are 2 tables-> GDDB and CHANGES
2: Poll the CHANGES table every 30 mins everyday.
3: a)Publish the records for which the 'published' flag status is 'N'
b)Update the status as 'Y' after publishing.
4: On the first day of every month, delete the records from the CHANGES table if the record is 3 months old and 'published' status is 'Y'
I would like to know how update and delete can be done using one JDBC adapter?
Regards,
Vishal.P.Kulkarni

Hi,
update:
there is a field in the sender jdbc adapter - SQL statement for update - put it there
delete - On the first day of every mont
create a job on the database which will trigger the delete statement
it does not/ should not have to be done with XI
Regards,
Michal Krawczyk

Error in File to IDOC Scenario

Hi,
I have File to IDOC scenario.
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Despite of this error in sender channel I am receiving the message in XI.
But in XI also it throws error :
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
Any help on this ?
Thanks,
Vikas

Hello Vikas,
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e. keyFieldValue.
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
regarding the above error refer this
https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
Regards,
Prasanna

Error while doing a File to IDOC scenario

Hi Experts,
I have created a File to IDOC scenario where in i have sent a file which has to pass data to ABSEN1 IDOC.I could see the IDOC reaching R/3 ,but with the status 56: "EDI: Partner profile inbound not available"
I have checked with all the configurations and couldnt find where it went wrong.
Kindly help me in this regard.
Thanks.

Hi
Check the inbound parameter and the process code.
To find Process code for IDoc use Tcode WE42.
ALE idoc trouble shooting use
Troubleshooting of ALE Process
look also this configuration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34

IDoc to JDBC and JDBC to IDoc Scenario

Dear All,
I am working on IDoc to JDBC and JDBC to IDoc Scenario.
I have to send Idoc from SAP to Non SAP system(.NET application) i almost configured in XI but still i don't know when my INTEGRATION will INVOKE how my data will proceed from IDOC to Oracle database(Through JDBC) and in case of revese how and when Data flow will start.
Does anyone have completed STEP by STEP scenario document for this?
How my Idoc will sent to XI?
How XI will pick up data from IDoc?
How XI will Convert data to JDBC and UPDATE in Oracle Database?
And i reverse case(JDBC to IDoc) when my INTEGRATION will INVOKE?
Where and When i can watch my process and data?
How can i test the whole integration?
I AM GETTING ERROR WHILE TESTING CONFIGURATION IN Integration Directory "Error while refreshing the XI runtime cache" and when i check this in SXI_CACHE it gives me error
"Unable to refresh cache "NO_BUSINESS_SYSTEM"
"Error during last refresh to cache"LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"
Please solve all the above problems i will reward u points
thanks,
RP

Hi,
While we working on IDOC to JDBC interface..
We have to deploy JDBC Drivers?
Go through this links,
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Configuring the Sender JDBC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
Configuring the Receiver JDBC Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
Idoc Reveiver adapter..
http://help.sap.com/saphelp_erp2004/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/content.htm
Thanks,
Satya Kumar
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Edited by: SATYA KUMAR AKKARABOYANA on May 8, 2008 5:51 PM

JDBC to IDOC Scenario

Hi Experts,
I have tried JDBC to IDOC Scenario but it is giving No Segments Found Exception. I don't know where I am doing the mistake.
can any body please send me a pdf document for JDBC TO IDOC Scenario with step by step procedure from scratch (including creation of LS,LI etc)
Thanks in Advance,
Murthy

Hi Murthy
The steps are pretty much the same as any other scenario with some exceptions
1: You import the IDOC structure from the R/3 System. This acts as the DT, MT and MI.
You also need to do some configurations on the ABAP Stacks of sender and XI system.
Sender:
WE20 Partner Profiles
SM59 RFC Destination
XI:
SM59 RFC Destination
IDX1 Ports
IDX2 This is the metadata repository so you wont necessarily need this.
Also because you IDOCs can be sent directly to the ABAP stack/Integration Server you do not need a sender comm channel or sender agreement.
The rest is pretty much as any other scenario.
Please see the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
Cheers..
Vasu
** Reward Points if found useful **

Confusion in IDOC scenario

Similar Messages

Maybe you are looking for