Confusion of systems in configuration of BEx

Hi All
We have installed BI system (version 7.0 EHP1) on server 1 with BI_CONT 7.04, and
have functional SAP Enterprise Portal on server 2
In configuration guide, it is referenced BI-JAVA, ABAP-Stack and JAVA-Stack as systems, on which the configuration is to be performed. I'm confused to perform BEx configuration on which server because both of our servers are on ABAP + Java Stack? Does ABAP-stack means ABAP configuration on server 1, Java-Stack means Java configuration on server 2, and BI-Java component on server 2?
Secondly, is there any pre-requisite document available about which components on what servers should be installed before configuring BEx or Visual Composer? There is an online document on help.sap.com that only highlights main components, but different blog points to new components like BI-* components on Enterprise Portal, BI server and EP server should be on same ABAP+Java stack level etc.
Thanks
Regards
Nayab

In any configuration guide related to connectivity of BW with EP or VC, JAVA stack is referred to the presentation layer, i.e. on which NW EP is installed. ABAP stack is reffered to BW server. VC requires EP to deploy iViews, thus the component is mandatory. For connectivity of EP with BW, BI-Java component is to be installed on the same server
All such information should be available by SAP on instguides master guide for integration, which I didn't able to find.
Hope it helps
BR

Similar Messages

  • First RFC call failed, config not loaded. Check the System landscape configuration.

    Dear Experts,
    We are getting below error on portal while using the BEX query in BI system.
    Error:
    BEx Web Application
    Error: First RFC call failed, config not loaded. Check the System landscape configuration.
    Exception occurred while processing the current request; this exception cannot be handled by the application or framework
    Failed to process request; contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page
    We are sorry for the inconvenience.
    As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
    Kindly suggest me on this issue..
    Thanks,
    Bharath.

    Hi Bharath,
    Please go through the below SAP Note and let me know if this helps.
    1903392 - Error: First RFC call failed, config not loaded
    BR,
    Anurag

  • Getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength) ...

    Hi Team,
    I am getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength).
    Anybody please let me know how to resolve the issue. It has affected our 9 site collection with almost 2000+ sites. Please email me your your suggestion or you can share your ideas here also.
    Tried to reset the IIS, checked the Internet connection speed (8MBps). Cleared the cache and all but no luck.
    Thanks,
    Pronob

    Hello,
    I have found this support window for you:
    http://support.microsoft.com/kb/556031
    http://technet.microsoft.com/en-in/library/cc298582%28v=office.12%29.aspx
    This may help you
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • IDOC Scenario: System not configured as XI integarton engine

    Hello Experts,
    I have beeen trying to solve this since a few days.
    I have created an IDOC scenario  from SAP ECC s/m to PI 7.0.
    The IDOC is being sent successfully fron SAPECC with status 03 in Transaction WE05.
    But in PI 7.0 I am not able to view these messages anywhere in WE05.
    SXMB_MONI of PI 7.0 shows an error record for previous trials and shows error status (red) as "System not configured as XI integration engine"
    I have already set configuration parameters on PI7.0 in SXMB_adm.
    Your suggestions will be appreciated.
    Thanks in advance,
    Elizabeth.

    Hi,
    you can check in PI:
    - TCODE - SXMB_ADM
    - integration server
    - edit - change global config - check if you have: integration server set
    Regards,
    Divya

  • Error with Transport system not configured that may be related to CHaRM

    Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to.  Error message was Transport System not configured.  Brought up QA and re-distributed system and Transport group and transport requests started working again.

    Hello,
    if a system, e.g. QA system, will not be available due to a maintenance task,
    we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
    This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
    (Of course you have to reset the status, when QA-system ist started again.)
    Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
    Therefore the developer should pay attention to the messages, which raise in urgent corrections.
    best regards
    Horst

  • Generated Proxy Error: System not configured as XI Integration Engine

    Dear all,
    Using transaction SPROXY I generated a proxy on a Message Interface.
    This generated as well a method and the associated class.
    When I run it, trying to send data through all this, I get the following error:
    <b>System not configured as XI Integration Engine</b>
    Here is the model I got on another thread, in order to catch the error text:
    DATA: l_sys_exception    TYPE REF TO cx_ai_system_fault.
    *...proxy call
    catch CATCH CX_AI_SYSTEM_FAULT into l_sys_exception.
    write: l_sys_exception->errortext.
    Anyone has any idea where this error commes from?
    I am mostly wondering whether the problem comes from my outbound system or XI configuration?
    Thanks a lot, have a nice day!
    Isa.

    check this thread
    https://forums.sdn.sap.com/click.jspa?searchID=2727912&messageID=1877263

  • System not configured as Integration Engine

    Hi Friends ,
    I have written an outbound client proxy for my interface . I am using XI to File Adapter scenerio .
    When I run the zprogram in R3 then I get the error
    System not configured as Integration Engine ...
    Please suggest .
    Best Regards
    Chan

    Hi Chane,
    Go to SXMB_ADM->Configuration->Integration Engine COnfiguration->Choose your R/3 system as Application System
    Refer this Configuration Guide - Page no 27
    https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
    Regards,
    Moorthy

  • Error: System not configured as Integration Engine

    Hi ,
    I was trying to simulate the following scenario in SAP XI:
    HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
    Let me clear what i did.
    I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
    1. I have Imported the RFC BAPI into IR.
    2. I have created the XSD files for http Re and res messages.
    3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
    4. I have created a Interface mapping and assign the created messages and mapping programs.
    5. In ID i have created a Business service for my web application.
    6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
    7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
    http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
    and in the result i have got the following error:
    "System not configured as Integration Engine"
    but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
    so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
    Reagrds
    Gopesh Kumar Agarwal

    Hi,
    What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use <b>service</b>=<SENDERSERVICE>instead of
    <b>bs</b>=<SENDERSERVICE> parameter in your URL.
    <b>bs</b> is replaced by <b>service</b> in XI3.0
    Your URL will be http://grserver:8000/sap/xi/adapter_plain?<b>service</b>=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
    Hope this helps you.
    Cheers,
    Siva Maranani.
    Message was edited by: siva  maranani
    Message was edited by: siva  maranani

  • System not configured as XI Integration Engin

    Hi Experts,
                             My system working fine up to yesterday but today morning when i came and saw this error is comming <b>System not configured as XI Integration Engin</b>  this error is showing in MONI ..
    Regards
    Rao

    Hi rao,
    Please see the following links.
    ERROR Integration Engine configuration
    one more
    integration engine
    Kindly reward points for useful answer.
    Regards,
    Vishal

  • System not configured as XI Integration Engine

    Hi
    I trigger an interface and get the error " System not configured as XI Integration Engine ". I get this error at the Call Adapter stage. How do I check in the receipient system ?
    Regards

    Hey,
    You can find similar issue faced by other and solution in SDN.
    Have a look at these threads.
    System not configured as XI Integration Engine
    SYSTEM_NOT_CONFIGURED_AS_XMB
    regards
    Ramesh

  • Error: System not configured as XI Integration Engine

    Hi All,
    I a getting this following error in RWB-->message monitoring -->adapter engine -->audit log
    "2007-11-29 09:28:45 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText:   ErrorStack: System not configured as XI Integration Engine
    2007-11-29 09:28:45 Error Transmitting the message to endpoint http://p2p:8003/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
    what might be the possible errors..
    regards,
    Rajesh

    Hi Rajesh,
    you can go through these chek steps
    1)go to SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server
    2) go to sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine? whether the link in sxi_cache for AE cache is showing green traffic signal and  also perform a delta refresh.
    3)Check whether your business system is tied to the integration server in SLD.
    4)In the transaction sxmb_adm -> Integration Engine Configuration can you check whether that role has been defined as Integration Server.
    hope these checks will solve your problem
    Thanks
    sandeep sharma
    PS:If helpful Plz reward points
    Also you may check whether in specific configuration you may need to add Category as Runtime Engine_Type and current value as HUB.

  • Error "system not configured as xmb" in transaction "sxmb_moni"

    Hi,
    when I send an IDoc from R3 to XI I get this error:
    system not configured as xmb" in transaction "sxmb_moni"
    also, in the adaptermonitor of the runtime workbench there is an error in the integration engine.
    "no rules for business-system are definied in SXMS_CONF_ITEMS"
    This error refers from a another error in transaction idx. so, we have assigned the integration engine client 100, because we work with this client. So, we can start transaction idx5 but, we get the other error, as mentioned.
    Can anybody help me please?
    Regards
    Stefan

    Hi Stefen,
    try to chk SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server if not  try sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine
    pls chk for this links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceba9b90-0201-0010-9687-a8b279e388bb
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/909760cb-0ec8-2a10-4a96-ee8417acfbc9
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/909760cb-0ec8-2a10-4a96-ee8417acfbc9
    if found worth pls do the req
    Thanx
    Sampath

  • Change and transport system not configured

    hi
    Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
    How to fix this?
    i appreciate your help in advance. Thanks
    Madhu

    Hi
    After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
    STMS is mainlly used for moving objects from one system to other system
    Regards
    kiran kumar.v

  • System.ServiceModel.Configuration.MachineSettingsSection does not exist

    Based on the instructions in this link for enabling logging of PII...
    https://msdn.microsoft.com/en-us/library/ms730318(v=vs.90).aspx
    None my versions - 3.5 -4.5.1 of .NET has a class System.ServiceModel.Configuration.MachineSettingsSection
    The only class with that name that exists is System.Transactions.Configuration.MachineSettingsSection
    I can only assume this is why it is not possible to add that section to machine.config, can anybody confirm this please?
    If so, then where should this section go in machine.config to enable PII logging?
    Thanks
    Jon

    The System.ServiceModel.Configuration.MachineSettingsSection class is indeed not public.
    But you can still add the enableLoggingKnownPii setting to a configuration file if this is what you want:
    Configuration machineConfig = ConfigurationManager.OpenMachineConfiguration();
    System.ServiceModel.Configuration.ServiceModelSectionGroup section = machineConfig.GetSectionGroup("system.serviceModel") as System.ServiceModel.Configuration.ServiceModelSectionGroup;
    foreach (ConfigurationSection s in section.Sections) {
    if(s.GetType().ToString().Equals("System.ServiceModel.Configuration.MachineSettingsSection"))
    string xml = s.SectionInformation.GetRawXml();
    if (xml == null)
    xml = string.Empty;
    s.SectionInformation.SetRawXml(xml + "<machineSettings enableLoggingKnownPii=\"true\"/>");
    machineConfig.Save();
    The other option is to just open the machine.config file in Notepad and add the enableLoggingKnownPii attribute manually:
    http://stackoverflow.com/questions/2325473/where-is-machine-config
    Hope that helps.
    Please remember to mark helpful posts as answer to close your threads and then start a new thread if you have a new question.

  • Deploying Office 365 Pro Plus using System Center Configuration Manager 2012 SP1

    Hello,
    I am trying to deploy Office 365 Pro Plus to my client machines (more than 100) via. System Center Configuration Manager 2012 SP1. It will use one administrator account for installation. But as per the licensing, we can install Office for up to 5 PCs/Macs
    and 5 more Windows tablets/iPads with one Office 365 Pro Plus licenses. If this is the case, then I cannot install Office 365 Pro Plus with one admin account to my 100+ machines, as it will violate the licenses of O365 Pro Plus.   
    So, what is the alternative approach?
    Thanks
    Raj

    If this is the case, then I cannot install Office 365 Pro Plus with one admin account to my 100+ machines, as it will violate the licenses of O365 Pro Plus.
    Hi,
    this is incorrect.
    There is no licensing restriction/control for the *installation* account at all, the licensing is related to who is *using* Office365ProPlus *after* installation is performed. This control, is implemented by the Microsoft Account, or OrgID, used to sign-in/activate
    to Office365 when *using* Office365ProPlus.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Maybe you are looking for