Confusion Reigns - Come On please fix the many forums we now have going!!

Seriously !!
I have posted a couple of questions in this forum, and waited and waited and waited. Sometimes no answer after a week, or when I finally got an answer and then replied to the answer, I again have to wait and wait. One of them after a week I bumped it up.
I wondered what was going on, and where is everybody?
then I see someone complaining about the Partner forum, so I have just gone and joined that.
Then while using the new V3 interface for the backend site manager, I found a problem, which I was able to replicate everytime. So I used the feedback on the side, to report it, only to find yet again another forum. Now I realise that the feedback was supposed to be for the new V3 backend, it appears to me to have become another forum for people to ask stuff.
3 forums, thats at least 1 too many.
Come on BC - please fix this problem.
Posted here as I dont have access to the new partnership forums as yet.

Hey John,
I have found 2 unanswered questions in your profile and tried to address them today. Please let me know if there are any other questions you are waiting for an answer on.
As for the forums, hopefully we'll have only one forum soon.
Cheers,
-mario

Similar Messages

HT1212 An elderly friend has given me her iPad to"fix". She has entered passcode incorrectly too many times (I now have the correct passcode). The ipad is now disabled,has never been connected to a computer . Can it be opened without loosing what is on

An elderly friend has given me her iPad to"fix". She has entered passcode incorrectly too many times (I now have the correct passcode). The ipad is now disabled,has never been connected to a computer . Can it be opened without loosing what is on it?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Can somebody please fix the mess that is iBooks?

can somebody please fix the mess that is iBooks? lousy metadata, lousy usability, and now fails to read my library until I delete it from the filesystem then rebuild it. reboot, and it's screwed again. do you need someone to run the iBooks development program? please let me know.

For Apple to see your message, best repeat it at
http://www.apple.com/feedback

Excuse me apple I had the police nock on my door about an iPad that was located at our house and the owner lost the iPad in-between bowral nsw and Sydney can you please fix the app (Find My IPhone)

Excuse me apple I had the police nock on my door about an iPad that was located at our house and the owner lost the iPad in-between bowral nsw and Sydney can you please fix the app (Find My IPhone) so that person can find their iPad coz the police would of taken mine if I did not show proof of purchase

You are not communicating with Apple by posting here. Everyone here is just a fellow user and cannot fix anything.
The Find My iPad service may have indeed been accurate to the limits of the technology. Unless the iPad was a 3G unit, location is determined based on the nearest WiFi router which in your case could just happened to have been yours. The police may be the ones who need to "fix" their understanding of how the technology works and its limitations.
If you want to provide feedback to Apple on the matter, you can do so via their feedback pages:
http://www.apple.com/feedback/ipad.html
but to be of any good you'll have to provide them with more precise details.
Regards.

PLEASE fix the iPod controls in iOS !

PLEASE fix the iPod controls in iOS 7 and upcoming iOS !!!!
I have always used my iPhone, as a musician, for learning new songs, and playing music. The previous versions, iOS 6 and older, it was very easy to grab the blue cursor ball and drag to any place in the song.
Since iOS 7, these simple controls have been broken. The ball cursor has been replaced by a red line, which is very difficult to drag to a different position in a song. If you are able to drag the red cursor line to a new position in the song, the iPod player stutters, and/or does not move to the desired position.
Disclaimer: I have been an Apple ADDICT since 1989... owning almost every version of the Mac since the Mac Plus. I have converted literally hundreds of friends, customers, and family members to the Mac platform, from the dreaded PC world of Darkness.
PLEASE fix or revert the iPod controls in iOS !!... it is an essential tool for a working musician/producer !
THANK YOU !!

You can tell Apple at the link below.
http://www.apple.com/feedback/iphone.html

Adobe: Please fix the spacebar cut in multi-camera editing!!

Dear Adobe,
Please fix the BUG which makes a cut in your multi-camera sequence when you hit the spacebar! This is extremely annoying!!
Thanks!
Former FCP User
- Ryan

(imagine the opening of Thriller with the door creaking open and footsteps...you've awoken a sleeping giant...well, not sleeping, recovering actually)
Hi TacoRye.
Welcome to the club. When I saw this post, my eye twitched, my shoulders tensed up and I was brought back to a time (http://forums.adobe.com/message/4714549#4714549) when hitting stop did things that were wrong...just wrong. But as one who's been shut down and locked out of that topic, I'll kindly say that yes, multicam is a bit more enjoyable and free of that design flaw in Premiere CC. In fact, you'll probably like it for a few more things in CC as it's true that they have implemented several FCP favorites in the recent releases that even old schoolers probably say "hmmm, well now this is useful". I was a convert to CS6 from FCP this time last year and open to new things but that stop/pause issue drove me nuts. But it's fixed now in CC. And although I'm dealing with equally frustrating issues in CC on a daily basis unrelated to multcam, unless you use Warp Stabilizer a lot you probably won't experience them. All new software will have its bugs, etc. and I'm still holding out hope that the upcoming release will fix these issues. I have faith. Lots of exciting new features are coming in the next week or so which is all nice and good, but if the actual issues and bugs are fixed, I for one will be even happier.
Bottom line: I encourage you to update to Premiere CC if you do a lot of multicam. Just be sure to update to at least 7.0.1 (the current version as of this post) because the regular 7.0.0 version has a pretty awful multicam bug unrelated to the CS6 thing.
Enjoy...and don't be scared.
(exit with sound of that guy from Thriller laughing...door shuts)

RE: Firefox search box - manage search engines - get more search engines.. IT DOESN'T WORK , I now get 1000's of useless irrelevant results, PLEASE FIX THE SITES SEARCH NOW, IT'S COMPLETELY USELESS NOW

RE: Firefox search box -> manage search engines -> get more search engines..
IT DOESN'T WORK
I just want to add youtube + some others to the list of sites in the Firefox search box, I now get 1000's of useless irrelevant results, PLEASE FIX THE SITES SEARCH NOW, IT'S COMPLETELY USELESS NOW

Hi Kvoter,
What are you hoping for, firefox to display lists of sites you have visited or bookmarked ?
*''' it should be able to do that'''
* my firefox does that
I am only a fellow ordinary user of Firefox & XP, but maybe the problem is on your machine, rather than needing a fix from firefox. If you take a little time to read this you may be able to sort out the problems yourself.
I hope you do not mind me covering a few basics:
* the [[Search bar]] { <-- clickable link -- ] is designed to produce a lot or results, whereas
*the [[Location bar search|Location Bar]] is a lot more specific and may be [[Location bar autocomplete#w_controlling-behavior|set]] to include or exclude History & or [[bookmarks]]
If you are getting literally 1000s of totally unrelated results you may need to consider [[Is my Firefox problem a result of malware]]
Hope to hear that you have solved the problem, or a bit more detail about what still is a problem.
John

Unable to navigate requested Expression.Please fix the metadata consistency

Hello ,
I have created one criteria but when I m running the request i m geeting this error, State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: Dim - GL Account.Unit Code. Please fix the metadata consistency warnings. (HY000)
now when i checked the RPD for this and run the consistency check everything went fine.No warning MSG, No Error, No Best Best Practice.
now i checked the join condition in BMM for the dimension i m using in report and fact.
it's like Fact F is directly Joined with Dim A & Dim B.
now when i checked the Physical join it's like Fact F1 is joined with Dim Aand Dim C , Fact F2 is joined with Dim B and Dim C.
so there is no direct fact table join between Dim A and Dim B.
Fact F1 & Fact F2 goes as MTLS in BMM and creating Fact F, now when i got this error i went to Fact F in BMM and checked the LTS and level of granuality for DIM A and Dim B for Fact F1 and Fact F2 respectively. and it is also set as detail level. and in BMM LTS Fact F1 and Fact F2 is also join with inner join with Dim C. and Dim C's level of granuality is also set in Fact F1 and Fact F2 .
the Columns that i m taking criteria are coimng from Fact F, Dim A, Dim B.
can anyone suggest me what to do in this case????
Thanking you..

Hi Veer,
If I get you correctly,
In BMM
Fact F = (physical F1 + F2)
In Physical:
F1 -> Dim A, Dim C ; F2 -> Dim B,Dim C
So, in your BMM, please make sure that
1. Logical source for physical F1 has 'Detail for Dim A, Dim C' and 'Total for Dim B'
2. Logical source for physical F2 has 'Detail for Dim B , Dim C' and 'Total for Dim A'.
I think this should resolve the issue.
Hope this helps.
Thank you,
Dhar

ATTENTION: Please fix the above failed worker(s) so the manager can continu

i am applying a patch p11067286_R12.AP.B_R12_GENERIC.zip , i am facing the error
ATTENTION: Please fix the above failed worker(s) so the manager can continue
i restart all the workers with adctrl but same problem .
please need urgent help

user13376823 wrote:
Dear Hussein,
i am finding these errors in one log file
AD Worker warning:
Product Data File
/opt/oracle/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.Hi;
This is ignorable error, please check workerlog file last 50 lines, you should see something like below:
FAILED: file adorgcnv.pls on worker 1 for product ad username APPLSYS.
FAILED: file adorgcnv.pls on worker 2 for product ad username APPLSYS.
FAILED: file adorgcnv.pls on worker 3 for product ad username APPLSYS.
FAILED: file adorgcnv.pls on worker 4 for product ad username APPLSYS.
Done reading jobs from FND_INSTALL_PROCESSES table ...
Telling workers to read 'todo' restart file.
Done.
ATTENTION: All workers either have failed or are waiting:
FAILED: file adorgcnv.pls on worker 1.
FAILED: file adorgcnv.pls on worker 2.
FAILED: file adorgcnv.pls on worker 3.
FAILED: file adorgcnv.pls on worker 4.
ATTENTION: Please fix the above failed worker(s) so the manager can continue
Regard
Helios

Please fix the metadata consistency warnings error..

Hi Guys,
I am new to OBIEE, When i try to convert a chart view into Pivot table i get th ebelow error.How can i fix this issue?
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 3058399872. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: FILTER(Budget Amount:[DAggr(Fact - Fins - Budget.Budget Amount by [ ] )] USING Dim - GL Account.Group Account Number = 'MKTG PAYROLL'). Please fix the metadata consistency warnings. (HY000)
SQL Issued: SELECT "Time"."Fiscal Quarter" saw_0, "Time"."Fiscal Period" saw_1, "Facts - Budget"."Total Operating Expenses" saw_2, "Facts - Actuals"."Total Operating Expenses" saw_3, "Facts - Budget"."Total Operating Expenses"-"Facts - Actuals"."Total Operating Expenses" saw_4, "Facts - Budget"."Total Operating Expenses YTD" saw_5, "Facts - Actuals"."Total Operating Expenses YTD" saw_6, "Facts - Budget"."Total Operating Expenses YTD"-"Facts - Actuals"."Total Operating Expenses YTD" saw_7, AGGREGATE(saw_2 BY ), AGGREGATE(saw_3 BY ), AGGREGATE(saw_4 BY ), AGGREGATE(saw_7 BY ), AGGREGATE(saw_2 BY saw_0), AGGREGATE(saw_3 BY saw_0), AGGREGATE(saw_4 BY saw_0), AGGREGATE(saw_7 BY saw_0) FROM "Financials - GL Budget and Expenses" WHERE ((Time."Fiscal Quarter" <= VALUEOF(NQ_SESSION."CURRENT_FSCL_QUARTER")) AND (Time."Fiscal Quarter" > VALUEOF(NQ_SESSION."FSCL_QTR_YEAR_AGO"))) AND (("WFS Segments".SEGMENT_NAME IN ('Aviation', 'Corporate', 'Land', 'Marine')) AND ("WFS Segments".ORG_NUM = VALUEOF(NQ_SESSION."OU_ORG"))) AND ("GL Segment1"."Hierarchy ID" = 'TTTTT') AND (Time.Status = 'Closed') ORDER BY saw_0, saw_1

As of my knowledge, you shouldn't get results set for any of views because of this error..!!
I see you are using 2 facts in the report.
And, dimensions you are using in this reports are confirmed dimensions to these 2 facts?
Are you mentioned proper content levels for each Fact LTSs?
Basic funda is: If fact and dimensions are joined directly, then you should mention the the level of granularity in Fact LTS. If not, you should mention total level of the dimensional hierarchy for the Fact LTS

Dear Sir/Madam, Adobe acrobat claims that there is an update. However the update process is very flaky and unreliable. Very poor service, with useless update prompts. System report is attached. Please fix the update, before advertising useless prompts

Dear Sir/Madam,
Adobe acrobat claims that there is an update.
However the update process is very flaky and unreliable.
Very poor service, with useless update prompts.
System report is attached.
Please fix the update, before advertising useless prompts for updates, for paid versions.
Thanks

Nothing is attached.
You should also be aware that there are a number of scams and malwares claiming fake updates.
Please post your report and tell us exactly what product and exact version you have.
And be aware you aren't talking to Adobe.

Hey Verizon / HTC / Google Please fix the caller ID problem, post 2.2 Froyo UPDATE.

Hey Verizon / HTC / Google Please fix the caller ID problem, post 2.2 Froyo UPDATE. This is a major Problem.

I have provided some steps below that may help with the Caller Id issue you are experiencing.
Try completing a soft reset on the device. A soft reset would be powering the device off and pulling out the battery. Once the battery is removed, place it back in and power the device back on.
Dial *228 and send. Once dialed, listen for the recording to prompt you for option 1 and select option 1. The phone should complete its programming within a minute.
Ensure you are using the area-code and 7 digit number format (ex. 9999951212)
Try removing the contact and re-adding it.

Please fix the "word substitution" feature!

The macros "%b" "%B" "%p" of word substitution is broken since 10.1.0. It is import for me. I have thousands of entries of it on my BOLD9900(about 30000 entries). Without them I can not input text efficently.
The macros "%b" "%B" "%p" just don't work. And if I use two of them, the second is treated as normal letters except a macro. For example, I set a Word Substitution entry like this:
myname %bqueshw
Then when I type "myname" twice, I get "queshw queshw". There is a space between the two "queshw". It should not be there.If I set a entry like this:
myname %b%bqueshw
Then I get "%bqueshw". The second "%b" is treated as normal letters now.
1. Please fix the broken macros.
2. Please activate the "word substitution" feature as default for the TextArea class. There are two class for inputting text , TextField and TextArea. But the TextArea is setted to inactivate the "word substitution" feature as default now.
3. Please open the APIs of "word substitution", and I can develop an app myself to import my entires from BOLD9900 to my Q10.
Please!!!

The macros "%b" "%B" "%p" of word substitution is broken since 10.1.0. It is import for me. I have thousands of entries of it on my BOLD9900(about 30000 entries). Without them I can not input text efficently.
The macros "%b" "%B" "%p" just don't work. And if I use two of them, the second is treated as normal letters except a macro. For example, I set a Word Substitution entry like this:
myname %bqueshw
Then when I type "myname" twice, I get "queshw queshw". There is a space between the two "queshw". It should not be there.If I set a entry like this:
myname %b%bqueshw
Then I get "%bqueshw". The second "%b" is treated as normal letters now.
1. Please fix the broken macros.
2. Please activate the "word substitution" feature as default for the TextArea class. There are two class for inputting text , TextField and TextArea. But the TextArea is setted to inactivate the "word substitution" feature as default now.
3. Please open the APIs of "word substitution", and I can develop an app myself to import my entires from BOLD9900 to my Q10.
Please!!!

Can you please fix the move and scale when adjusting a wallpaper can you set it up right before iOS 7 update

Can you please fix the move and scale when adjusting a wallpaper can you set it up right before iOS 7 update and it aggravates me that every time I try to put a picture of my wallpaper is just Zooms in and you can't see all of the picture it wasn't like this before

Nobody here can change it. We're all just other users like yourself here.

I moved from MobileMe to iCloud and all my contacts are lost! The only contacts I now have are from my Exchange account. Any help please. I tried "Import from SIM" but as all my contacts were on MobileMe, they're all gone!!

The only contacts I now have are from my Exchange account. Any help please. I tried "Import from SIM" but as all my contacts were on MobileMe, they're all gone!!

that happens for people who used icloud for everything but contacts. When they updated and went through initial
set up, signing into cloud enabled everything including cloud for contacts. Since they had zero contacts in cloud, cloud cleaned out their contacts, but synced everything else that icloud has, like calendars, reminders etc. If those contacts were never backed up anywhere - they gone. If there is back up in cloud, it needs to be restored.
Contacts sync in the cloud need to be turned off, right after restore.

Confusion Reigns - Come On please fix the many forums we now have going!!

Similar Messages

Maybe you are looking for