Congratulations to the winner of 3D CAD contest

Michael Kozenko is the winner of 3D CAD contest, held by Russian ISV-ASCON
The design contest was held for 12 years, purpose is to encourage more students and more engineering studios using Ascon software.
This year MSI Workstation team was invited to announce prize winner.
Let’s see more of their great artworks. http://ascon.net/showcase/gallery/

They already have your number and/or email address and maybe have sold it several times already to others as well. They also use number generators - software that will automatically create them - some work and some don't, they don't care, they send out millions and a few will fall for it and send them money. The only way to "hide" would be to change both and your password, but then it would happen again at some point.

Similar Messages

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request. How do I get Safari to be normal again?

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request. How do I get Safari to be normal again?

The Elder Scrolls Online Wallpaper Contest

***Winner Announce***
Thanks for all of your submissions to The Elder Scrolls Online Wallpaper Contest.
Four lucky designers have been chosen for their creativity, Your four winners are as follows:
Grand Price: MSI X99S GAMING 9 AC Motherboard
Lo Relyn
Creative Awards: MSI X99S GAMING 7 Motherboard
Sam Nicko
Bonus Prize: The Elder Scrolls Online Imperial Edition
John Nakazato
Joseph A. Fakhry
And also, the following winners are for the bonus prize “The Elder Scrolls game codes”
(Each of you will receive two game codes):
Andrea Ristic
Diyan Tuban
Eduardo Veldi
Errol Gonzaga
Edmar L Reb
Hachi Roku
Jasper John S. Cecilio
Nikolaos Daniilidis
Pandu Ihsan Pondel
Raymond Morales
Winners must private message (PM) the admin of our MSI Fan Club their details within 7 days of the announcement of the winner’s list. The details needed are: Full Name, Address, E-Mail, and Contact Number. If the details are not pm-ed to the admin within the 7 days, the winners will be disqualified.
[/b]
=========================================================================
Keen photographers, illustrators and graphics ninjas amongst you now have the chance to join the "The Elder Scrolls Online" Wallpaper Contest and get chance to win the MSI X99s Gaming Series Motherboards!
Join the Contest at: http://woobox.com/o8puby
As an open content, anyone can take part in the “The Elder Strolls Online” wallpaper contest. You don’t have to be an award winning photographer or degree-laden illustrator to take part. All that’s needed is creativity and the know-how to be able to put it into pixels.
***Prize Pool***
Grand Prize: MSI X99S GAMING 9 AC Motherboard *1
Creative Awards: MSI X99S GAMING 7 Motherboard *1
***Bonus Prize***
The Elder Scrolls Online Imperial Edition *2
(For the bonus prize, you have to using the MSI Dragon Shield Logo and MSI X99S GAMING 7 image.)
***Evaluation/Winning Criteria***
Creativity: 60%
Votes: 40%
***Contest Rules***
1.   The theme for this contest is “The Elder Scrolls Online”.
2.   Your wallpaper must be submitted in a standard desktop resolution. Accepted resolutions is 1920x1080, image size shouldn’t exceed 2 MB.
3.   The wallpaper must include the MSI Logo, and also the The Elder Scrolls Online logo.
4.   The file type can be JPEG or PNG.
5.   For the bonus prize, you have to using the MSI Dragon Shield Logo and MSI X99S GAMING 7 image.
6. By submitting your wallpaper entry to this contest you give MSI the right to use/upload/print
any wallpaper entries for marketing activities during or after this contest.
7. Any copyright infringement or piracy is absolutely forbidden. Your designs should be just that – your own designs!
You can use the image from game, hand-drawing, or from the Website:
http://www.elderscrollsonline.com/en-us/media/wallpapers
Also, you can download the logo/product image files at:
MSI Logo (white)http://goo.gl/UpBkBN
MSI Gaming Logo http://goo.gl/TyBcnq
MSI X99S GAMING 7(1) http://goo.gl/o1l6ss
MSI X99S GAMING 7(2) http://goo.gl/bYn4DF
MSI X99S GAMING 7(3) http://goo.gl/3I3GjP
The Elder Scrolls Online Logo http://goo.gl/FxAgUg

2014/9/18 update
Haven't join this contest? join it now! http://woobox.com/o8puby
and also share your wallpaper to your friends!
Created by: Jasper C.
Created by: Joseph F.
Created by: Løs B.
Created by: Nils P.
Created by: Edmar R.
Created by: Geoff G.
Created by: George A.
Created by: Hachi R.
Created by: Jasper C.
Created by: Michael P.
Created by: Raymond M.
Created by: Raymond M.
Created by: Sam N.
Created by: Yusuf H.
Created by: 一条の光

Am I really the winner of a very large sum of mone...

Yesterday, I received a post on Skype, from a christopher.foster16 who wanted to make contact with me, but also informed me that I was the winner of a very large sum of money in Great British Pounds. He gave security ? numbers and a name I must contact to have the money sent to my address which I was asked to give in an email to Mr Petersen whitehead skype cash [email protected]
The prize amount is very tempting ofcourse, but my son said it has to be checked out as he thinks it is a definite scam. what can I do about this?...anyone know Please. I am 83 years old, and only use skype to contact my relatives and friends who are overseas.
Thankx.
Post transferred from blog article;
subject/title edited accordingly.

correct, cofirming that is indeed a very well known scam. you can also report the user/sender to [email protected]
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Am I really the winner of a very large sum of money?

Yesterday, I received a post on Skype, from a christopher.foster16 who wanted to make contact with me, but also informed me that I was the winner of a very large sum of money in Great British Pounds. He gave security ? numbers and a name I must contact to have the money sent to my address which I was asked to give in an email to Mr Petersen whitehead skype cash [email protected]
The prize amount is very tempting ofcourse, but my son said it has to be checked out as he thinks it is a definite scam. what can I do about this?...anyone know Please. I am 83 years old, and only use skype to contact my relatives and friends who are overseas.
Thankx.
Post transferred from blog article;
subject/title edited accordingly.

Just ask them to send the money to you with a currier post.

Siebel RecordMerge: How to exclude some entities from merging to the winner

Hi all,
I want to merge 2 accounts using Edit -> Merge Records.
However, I don't want one of the related BCs (let's say contacts) to be merged to the Winner. I only want to transfer the rest like activities, opportunities etc. How do I exclude a child BC from the record merge?
Should be fairly easy, but I can't find any related information.
Thanks!

I have the similar problem. I have ORA- in the Critical threshold and I just want to exclude ORA-00060 from critcial threshold. What will be the syntax for that? I do not want to filter it. I still want to recieve it as warning.
Thanks
Rinky
Edited by: user11991081 on Oct 15, 2009 3:20 PM

Hello congratulations for the work you have been developing. The iCREATE has helped me greatly improve my Mac and better understand some applications. Recently my iPhoto has given me problems and I do not realize what is happening. When I double click a p

Hello congratulations for the work you have been developing. The apple support has helped me greatly improve my Mac and better understand some applications. Recently my iPhoto has given me problems and I do not realize what is happening. When I double click a photo it does not appear ... or rather the background is black and only the zoom window appears. How to solve this? I've done a restoration of the library, but the problem remains. Thanks and good job.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

The War is over: the winner is...

Hi(Bonjour)!
The WAR is over:
http://www.engadget.com/2008/02/19/official-hd-dvd-dead-and-buried-format-war-is -over/
And the winner is... Blu-Ray.
So, no more question about HD-DVD production/distribution but still no app to produce Blu-Ray DVD.
Be patient, I'm pretty shure that some companies should conquer this +terra incognita+ soon and we will see Blu-Ray DVD burners, media and authoriting tool on the market.
Michel Boissonneault

It's funny you should bring up HD right now.
A few hours ago I was reading a question from someone who is thinking of getting a Canon HV20 and as I knew nothing about it I googled its name.
The link I got was to Amazon who were selling it incredibly cheaply (£545) and under the price were the words, "Want guaranteed delivery by 1pm Wednesday, February 20? Order it in the next 8 hours and 52 minutes.................. "
I suddenly remembered that date was my birthday !
Was this some omen telling me to part with my cash ?
I also looked at a comprehensive review which seemed to sing its praises - Canon HV20
So if I did decide to get it, would it work well on FCE/FCP ? No capture problems - after all it is a Canon and we know about their FW implementation ?
In short, would it be a good camera for shooting video and editing with FCE/FCP ?
Ian.
P.S. My wife says we can have an HD TV to go with it - but, then it's my money she's talking about !

The xfce-4.4 themes contest discussion

As stated on http://blog.archlinux.org I posted the files for the contest on my server: http://arch.justdreams.net/xfce44-themings.tar.gz
I recommend to either fetch shadowhands xfce4-svn packages or the set I offer here http://arch.justdreams.net/xfce4-pkgs/
I use it already for daily use and didn't encounter serious problems.
The things you should consider if you like to add an entry.
· a usable, nice WM theme not too small and not too large, fitting for users from laptop sized screens to dual widescreen setups.
· a background image, that doesn't steal focus from work (read: no strong contrast, everything in like colors, makes it possible to use (semi)-transparent terminals, scales well over several desktop sizes, also fits on non 4:3 screens)
· a nice gtk-theme using gtk-xfce-engine (read: come with corporate colors, don't waste space but have usable handles) gtk-xfce-engine stays part of 4.4 (there were discussions to ditch the gtk-xfce-engine in favor of gtk's new standard engine clearlooks)
· a nice splashscreen theme (no real reglementations apart from colors)
for xfwm4 themes you wanna read http://www.xfce.org/xfwm4-theme-howto/
Xfwm-4.4 has some new features:
- you can use svg instead of png files (check: http://foo-projects.org/pipermail/xfce4 … 21447.html for some details)
- you can replace the menu button by adding "show_app_icon=true" in themerc
The files you find in my tarball reflect the way I was working:
- create the design
- split design into the shape parts (provided by the xpm picturesthat can actually pick up gtk colours) and the shade parts(transparent pictures on top of xpms either png or svg)
- build the actual buttons (shape, colour etc)
- I exported the xpm from gimp and used a whole bunch of sed lines to flip colours to get the pressed and -active state (se the shell script in te directory for details)
The background image isn't tricky.
I added my gtkrc file in the tarball. It was mainly created from studying other gtkrc files since I didn't find some serious documentation on it.
The splashscreen is pretty much straight forward. I added a .blend file for a rendered Arch symbol. You don't have to use it. The old theme used the balou engine - you can use any other or write your own. Doesn't matter.
XFCE-4.4 is at rc1 at the moment. I think it's gonna take another month b4 it hits the final. After that we will have a poll at the forum to figure which theme the users like best.

rezza wrote:
Cimi wrote:
Yeah thanks! I think you can redraw buttons in rezlooks and use my function with CL_CORNER_NONE to get better look with squared theme.
Anyway what have you *stealed* from my works? yes i like that someone appreciate my works but it's always not fun thinking you've worked for days and someone *copy* your code. I hope this *steals* are originals since that could be an improvement not a simple copy! My engines are based on rezlooks/clearlooks but i've done a lot of original work for them!
"God bless opensource" as you said, I totally agree, expecially it the ways it comes with original things and not copies!
Hehehe, by "stealing", I only mean stuff like using that function to draw rectangles instead of just cairo_rectangle, stuff that you suggested anyway... most of the original stuff you do for Murrine would be wrong for Rezlooks anyway.
Yeah, I'll chat to you on IRC sometime soon, we can discuss some things. I've been very busy with real life recently, haven't had a chance to do any work on Rezlooks for a while, I am still planning on releasing 0.7 at some point though... And yeah, that collaborative engine we talked about will be awesome
Ok I just want to focus that murrine_rounded_rectangle has to be rewrite for with the next release of cairo (1.4.0) that will be released the next month will have a great performance improvement where lines are drawn aligned. In the current cairo version there's a bug in cairo_stroke which is twice slow than cairo_fill, so unless you fill the stroke of unaligned lines appears slow as aligned ones.
With next cairo release the "stroke bug" will be fixed and we'll have to rewrite function to get the new performance boost.
I had found occasionaly this bug yesterday when i was stripping down murrine toghether with benzea and thos, gnome developers.
If you see in the gnome cvs you'll find new fixing in a lot of engines that get twice as fast by implementing cairo_fill instead of cairo_stroke, waiting new cairo release for reverting it back...

Does anyone have a 3D connection 3d mouse running on the parallels side for CAD software

I am trying to install a 3Dconnexion Space Navigator on the windows side. I am Parallels and Windows 7 Home Premium. The 3D Mounse works fine on the MAc side, but I have some CAD packages that will run windows only.

Very Frustration!!! As a teacher, I am forced to use ppt for my presentation so that I can markup the slides during a screen recording and post that on my website. All my products are Apple and it would be much easier, to say the least, if Apple would come up with a simple markup tool to use with keynote or at least adjust keynote so that I can use my Bamboo pad during a keynote presentation. Usually they are on the cutting edge of technology so it baffles the mind that they have not addressed this issue especially with the endless applications in education.

How does one resize a photo to the dimensions required by a contest?

How does one resize a photo in aperture to the dimensions required by contest?

Are you submitting a print or a file?
You set the size of your print in the print dialog.
You set the number of pixels (the unit of linear measurement of digital images is the pixel) for a file when you create that file by exporting an Image from your Library. You can specify a recommended number of Pixels per Inch by using the (mis-named) DPI field in the Image Export Preset you use when you export.
The files you import have a height and width in pixels. Height/width = the Aspect Ratio. You can crop to any aspect ratio using Aperture's Crop tool.
What are the specs required by the contest's sponsors?
Message was edited by: Kirby Krieger -- added aspect ratio and cropping.

Whi is the winner? ALV LIst or ALV Grid OO?

Hi Guys,
Hope you are all well.
My company is still mostly using the ALV List Function Modules when creating reports. Yes, they are using the SLIS pools.
I have written a template program for them to start doing things the OO way. That is to say, using ALV Grid Objects.
We are now thinking of COMPLETELY going over into ALV Grid Objects, but some of us are still arguing which one is best?
The biggest argument is :
Is ALV too "expensive" with regards to using system recources?
Please give me your thoughts as Im all for going for OO, but I would understand if it would make things slower.
Points will be awarded for useful arguments.
tks
Christiaan

SLIS is OLD, OBSOLETE DINOSAUR technology.
With the new classes you can create new reports really quickly and easily and add all sorts of functionality to them.
There's a small learning curve -- but what ought to appeal to management is that once you get the hang of it you can produce a report in hours (or even minutes) which done in the old way could take a week or more.
These days Human development time is far far more expensive than machine time so there's NO CONTEST.
The advantages in general of OO are too numerous to list here but if you look at the sample code I've listed here you can see how easy and quicklly you can get an application up and running even if you haven't got my Z_class definition listed in the program (it's a global class now defined with SE24).
With either cl_gui_alv_grid or even easier (if you don't need edit capability) the salv_table type class it only takes a few lines to code your program and display the grid.
All you ever now need to do in an alv program is the following.
1) define your data structures
2) use RTTI to generate dynamic field catalog from your data structures
3) create dynamic table
4) populate it
5) display grid.
You should have all the events etc you need such as cell selection etc etc.
Your whole code could be quite small.
For example I've got a generalized Z_cLass for my alv grid.
Now here's a sample program to display program names in the system. When I double click a program SE38 is entered and on exit unlike the standard sap transaction my list is re-displayed where I can choose another program.
Note how small the code is.
You won't be able to copy and run this program directly as you'll need the Z_class definitions.
In this Z_class there's also functionality for ON data change, multiple cell selection , toolbar additions etc.
These methods are available to EVERY program calling the class.
If you need the extra functionality using SLIS you have to program it in every time for each individual program.
You can therefore concentrate in your application program on just getting the data and displaying it. All the complicated functionality is in the Z_class.
Incidently using ALV classes can also render the whole idea of classical dynpros with Table controls as also obsolete.
program zzjimboprogs.
tables : trdirt.
include my_zdata. "data references to my Z_Class etc.
* Front end to call SE38 Program list
* When you use the search Program facility in SE38
* the system loses the LIST after you choose a program and enter
* transaction SE38
* double click on the Program module you want SE38 to use.
* After exiting SE38 you will return to the list .
types: begin of s_elements,
name type trdirt-name,
text   type trdirt-text,
end of s_elements.
data: progname type trdirt-name.
data: wa_elements type s_elements.
selection-screen begin of block one with frame title text-t01.
select-options: s_prog for trdirt-name obligatory.
selection-screen end of block one.
at selection-screen.
initialization.
   invoker = sy-repid. "Name of calling program for alv class.
start-of-selection.
create data dref type s_elements.
assign dref->* to <fs>.
i_gridtitle = 'Program List'.
invoker = sy-repid.
i_zebra = ' '.
i_edit = 'X'.
create object z_object
       exporting
                  z_object = z_object
                  cfname = 'CCONTAINER1'.
     assign z_object to <fs1>.
i_object = <fs1>.
call method i_object->build_dynamic_structures
exporting
    my_line = <fs>
    calling_program = invoker
importing
    dy_table = dy_table
changing
    it_fldcat = it_fldcat.
perform populate_dynamic_itab
changing dy_table.
perform modify_fldcat.
i_screen = '100'.
i_text = 'Prog List'.
perform display_grid
       using
         i_screen
         i_text
         it_fldcat
         <dyn_table>.
end-of-selection.
form populate_dynamic_itab changing dy_table.
assign dy_table->* to <dyn_table>.
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
select *
        from trdirt
         into corresponding fields of table <dyn_table>
         where name in s_prog
         and sprsl eq sy-langu.
endform.
form display_grid
using i_screen
     i_text
     field_catalog
     dynamic_table.
call method i_object->display_data
         exporting
           i_gridtitle = i_gridtitle
           i_edit = ' '
           i_zebra = ' '
           i_opt = ' '
           title_text    = i_text
           program       = invoker
           screen_number = i_screen
           z_object = i_object
            changing
           it_fldcat = field_catalog
           gt_outtab = dynamic_table
           e_ucomm = e_ucomm.
         if e_ucomm = 'BACK'.
           leave to screen 0.
      else.
        leave program.
      endif.
endform.
form verwerk.
endform.
form refresh.
call method i_object->refresh_grid.
endform.
form dubbelklik using
        e_row   type lvc_s_row
        e_column type lvc_s_col
        es_row_no type lvc_s_roid.
read table <dyn_table> index e_row into wa_elements.
progname = wa_elements-name.
    set parameter id 'RID' field progname.
     call transaction 'SE38'.
perform refresh.
row_number-row_id = e_row.
call method z_object->set_cell
    exporting
            e_column = e_column
            es_row_no = row_number.
endform.
form modify_fldcat.
col_name it_fldcat 1 'Programe' 25.
col_name it_fldcat 2 'description' 50.
endform.

How to creat the interface of auto CAD file with labview

Hi
I have been controling 2-axis Piezo motor with labview. Now I have to use the dwg or dxf file to move the piezo controller axis. How I can transform the dwg or dxf file into decimal number 1, -1 to create interface with my labview.

Hi Nusrat,
So it sounds like you want to create a CAD drawing and then control your piezo motor via LabVIEW by moving the CAD drawing? Is that correct?
If that is correct - I don't know of a way to do this I'm afraid. I don't think it's really possible.
The only potential way to do this is to use SolidWorks as your CAD program and then convert the SolidWorks drawing into an STL file, which can then be imported into LabVIEW as a 3D picture control. I can't think of any other way to achieve this.
These examples might help you:
LabVIEW Interface VIs for SolidWorks
STL Geometry in 3D Picture Control
The Pitch Perfect Tuner
Develop Motion Applications with RIO and SolidWorks
NI SoftMotion for SolidWorks
Connect NI LabVIEW and DS SolidWorks
I hope that helps.
Oli
LabVIEW Student Ambassador
National Instruments UK

Thank You, Congratulations, and the Apple TV

Dear Mr. Jobs,
Thank you for creating the MacBook Air. It’s exactly what I’ve been waiting for in an ultra portable. The weight, battery life, SSD, multi-touch with CoverFlow, iChat with iSight, and full size keyboard make this the best ultra portable laptop in the market in my view.
Thank you for taking another swing at success with the Apple TV and considering the consumer while you were up at the plate. While I think it’ll be a homerun, I want to offer my view of what’s still needed to transform the Apple TV into a grand slam. The iEvery. Everything, everywhere, anytime. Or better yet, the iFreedom.
The top two factors in my view that propelled the iPod to reach critical mass were freedom and status. I believe these factors can be applied to creating the same success for the Apple TV.
Freedom
As consumers, we embraced the opportunity to transform the hundreds of CDs sitting on our shelves into a single, portable library in our pocket. The freedom to enjoy all of our music anywhere anytime, provided the motivation to digitize our music libraries, and consequently, purchase new digital music legally through iTunes.
For the Apple TV to succeed, I believe Apple TV or iTunes must facilitate the same legal digitization of our existing DVD film library as is presently provided with our CD music library. That will spark sales for movies in iTunes the same way propelled sales for digital music. Does Congress need to pass a similar law as AHRA for films first or can licensing with the majors sanction this?
Second, syncing vs. streaming. Once a consumer digitizes the media, the most freedom would be found by storing the digital film on a central home TerraServer that can stream content wirelessly. This seems like a slam dunk at home, but I believe what could propel Apple TV into the stratosphere is the ability for a consumer to stream from his home TerraServer to any location, via the iPhone.
The next-gen iPhone could stream any file; music, film, documents, etc.., at 3G speeds. The iPhone could facilitate a wireless connection to the MacBook, and thus provide remote access to any file, including a film viewed on the gorgeous Mac screens. The iPhone could be placed into an iDash in your car to provide access to your home TerraServer, and stream music and films into your car’s entertainment system, as well as hands-free, voice powered phone and email communication.
That is freedom, the iFreedom.
Status
The white earphones of the iPod. For the Apple TV/iFreedom, how about wireless headphones with simulated 5.1 when appropriate. Perhaps in the web 2.0 color, lime green. Also close in color to the Granny Smith. =^)
Thank you again for the MacBook Air. Thank you for listening and considering the consumer. Congratulations on another remarkable year of innovation. I look forward to the next 50 weeks.
Respectfully,
John McMillion
San Diego, CA

Works fine on 60" here...
What do you mean cut-off? Letterboxed? One side only?
HDMI should sync up without an issue.

And the winner is . . .

          I am happy to announce that Gene Chuang has been selected as the 2002 BEA WebLogic
          Guru! Thanks to all of you who cast your vote. The voting was close, but Gene
          pulled it off in the end.
          As the 2002 BEA WebLogic Guru, Gene will receive an all-expense paid trip to BEA's
          Developer Conference, eWorld in San Diego, California, February 24 - 27. While
          at eWorld, Gene will enjoy insightful presentations, workshops, roundtables, and
          exciting evening social events with the worldwide BEA user community, as well
          as have lunch with BEA WebLogic developers and executives.
          BEA appreciates all the wonderful knowledge Gene, as well as the rest of the BEA
          WebLogic newsgroup community, has contributed to make the BEA newsgroups the best
          ever! We look forward to even more insightful knowledge in the coming year.
          Congratulations Gene!!
          Dee Davis
          Global Services Marketing Manager
          BEA Systems, Inc. -- How Business Becomes E-Business


You should have a look at user "2" (http://forums.oracle.com/forums/profile.jsp?user=2).
No human beeing can top his or her 206074 posts ... Must be a OTN-Jedi master ;-).
Markus

Congratulations to the winner of 3D CAD contest

Similar Messages

Maybe you are looking for