Connceting FMS over RTMPT resulted in poor perfomance of whole application
Hi,
We are connecting to FMS 3.5.7 behind the firewall through rtmpt and we have very poor performance over whole application even though we are not playing video in the application.My question is does the rtmpt use port 80 over http eventhough when we dont play video in the application.does it effect performance of whole application when connected through rtmpt?.
Can you pleae suggest me the solution to imporve my perfomance of the applciation when atleast not playing video in the applicaiton.Please suggest some changes..
Hi,
If you are accessing application from outside the firewall It cause problem in continuing the connection with FMS. you can see through wireshark, there will be reconnection very frequently. So, it is better to use rtmps for better performance.
Similar Messages
-
I search for apps about my hobby. There are over 1500 results. Each single result takes up the whole screen. I will have to swipe the screen 1500 times to see all the results. How can I see 8 or 10 results and scroll through fast? Thanks very much for any suggestions!
Bump:)
But I've found some online reviews of this and I think we
are stuck with this amazingly awful search system until
they realize people like me won't bother searching for or buying
Apps.
Does a novel display one sentence per page?
Do you listen to a radio documentary that transmits one word a minute?
Or how about a song that is broken into four parts because the singers ran out of breath?
Searching app products has never been easy or a pleasure, and now it's tougher than ever. Who has the time to swipe 1,600 times? It HURTS - and hurts my brain just thinking about it.
Woe is me!
Woe are we! -
Different unit Measures Total in over all Result
Dear All,
The quantity is in different unit of measures like
Presently getting:
10PC
10KG
10PC
20KG
10ton
Total *
when add all those things the over result shows the *
when i go with CKF NODIM option i could not found againest which order kgs are there and for which order pcs are there.
So there is any option getting the overall result total of different unit of measures .
I want as below
10PC
10KG
10PC
20KG
10ton
Over all Result :
20pc
30kg
10ton
like that I need any possibility , Unit converion doing at transforamation level based on the conversion factors
but the base unit of measure and Alternate unit of measures are different orders are having different units , so it should be added.
Please can anybody provide the some information.
Thanks & Regards,
SathishHi,
Thanks for your kind responce,
which you said is ok to some extent , but the report looks not good
as per your idea the report output is below
order unit1 unit2 unit3 value qty
1 x kg x 10000 20
2 to x x 5000 10
it looks like that , it is not good again the customer want total of the all units so the above one will not give
in which way i mentioned in same either it is possible or not
Once again thanks for kind responce and Idea
Thanks & Regards
sathish -
Capture when finished iterating over query results...
Hello. I have a flex app that queries a web service. The code
to iterate over the results is shown below. the query string is
passed to the connection, and the results are processed inline.
I want to know when i'm done iterating over the results. How
do i do this? My current approach seems clumsy. I add an event
listener to my connection for query complete. When that fires, I
get the length of the result set. Then in my iterator, i have a
condition that checks when the record count is equal to the length
of the result set. i assume there's an easier/better way?
queryResultIterator2 = new QueryResultIterator(wsconn,
queryString,
function (so:SObject):Boolean {
productCodeAC.addItem(so.Product_Code__c);
return true;
thanks
chrisHi Dan
When i use the cfouput with the group attribute... the query only returns one of the columns from the table for stock spool sizes...
so the new query results will have 1 part which is good 10 Sol | 31.43 | 1000
but only 1000 .. when it should return 1000 | 2500 | 5000 based on that wireid
Thanks -
hi experts ,
we are using classic scenario (ECC 6.6 & SRM 7.0)
we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
but facing issue.
The XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
error as below
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi Vijay,
Can you tell us the interface name?
If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
Let us know if this helps you.
Regards,
Mayur -
Open SharePoint 2013 Search Results (EML files) In The Client Application
Hi, I have a problem about using sharepoint 2013 search for EML files:
When i click on the search result link *.eml, the browser open for the email file, i can only view the content of the EML file, but actually i want to see the full info of it like using an email client application outlook express including From:,To:,Date:,Subject:,ect.
How can i click on the search result link to open an email client application to view the result?
Thanks a lot.Hi ,
According to your description, my understanding is that you want to open SharePoint 2013 Search Results (EML files) in the Client Application.
For your issue, you can follow the steps as the blog’s:
http://www.quercussolutions.com/blog/index.php/opening-eml-file-types-in-outlook-from-sharepoint-2010/
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Cache database results within any of your software applications?
Have you had to cache database results within any of your software applications? What are the advantages and pitfalls developers should be aware of when caching database results.
plz reply....
........thnks.We have cached the database results in client side cache (partially in arrays and in files on OS as well). But this caching is restricted to purely STATIC data (which undergoes no change under any circumstances).
Our application relies a lot on static data and we managed to reduce 10% of network bandwidth with this implementation.
We tried using client side cache for not-so-static data but had lot of issues related to refresh of the same so we reverted that change.
On a side note, this does remind me of the client result cache available in Oracle 11g.
http://download.oracle.com/docs/cd/B28359_01/server.111/b28279/chapter1.htm#FEATURENO06989
See if it helps you. -
Hyper-V over SMB 3.0 poor performance on 1GB NIC's without RDMA
This is a bit of a repost as the last time I tried to troubleshoot this my question got hijacked by people spamming alternative solutions (starwind)
For my own reasons I am currently evaluating Hyper-V over SMB with a view to designing our new production cluster based on this technology. Given our budget and resources a SoFS makes perfect sense.
The problem I have is that in all my testing, as soon as I host a VM's files on a SMB 3.0 server (SoFS or standalone) I am not getting the performance I should over the network.
My testing so far:
4 different decent spec machines with 4-8gb ram, dual/quad core cpu's,
Test machines are mostly Server 2012 R2 with one Windows 8.1 hyper-v host thrown in for extra measure.
Storage is a variety of HD and SSD and are easily capable of handling >100MB/s of traffic and 5k+ IOPS
Have tested storage configurations as standalone, storage spaces (mirrored, spanned and with tiering)
All storage is performing as expected in each configuration.
Multiple 1GB NIC's from broadcom, intel and atheros. The broadcoms are server grade dual port adapters.
Switching has been a combination of HP E5400zl, HP 2810 and even direct connect with crossover cables.
Have tried stand alone NIC's, teamed NIC's and even storage through hyper-v extensible switch.
File copies between machines will easily max out 1GB in any direction.
VM's hosted locally show internal benchmark performance in line with roughly 90% of underlying storage performance.
Tested with dynamic and fixed vhdx's
NIC's have been used in combinations of RSS and TCP offload enabled/disabled.
Whenever I host VM files on a different server from where it is running, I observe the following:
Write speeds within the VM to any attached vhd's are severely effected and run at around 30-50% of 1GB
Read Speeds are not as badly effected but just about manager to hit 70% of 1GB
Random IOPS are not noticeably affected.
Running multiple tests at the same time over the same 1GB links results in the same total through put.
The same results are observed no matter which machine hosts the vm or the vhdx files.
Any host involved in a test will show a healthy amount of cpu time allocated to hardware interupts. On a 6 core 3.8Ghz cpu this is around 5% of total. On the slowest machine (dual core 2.4Ghz) this is roughly 30% of cpu load.
Things I have yet to test:
Gen 1 VM's
VM's running anything other than server 2012 r2
Running the tests on actual server hardware. (hard as most of ours are in production use)
Is there a default QoS or IOPS limit when SMB detects hyper-v traffic? I just can't wrap my head around how all the tests are seeing an identical bottleneck as soon as the storage traffic goes over smb.
What else should I be looking for? There must be something obvious that I am overlooking!By nature of a SOFS reads are really good, but there is no write cache, SOFS only seems to perform well with Disk mirroring, this improves the write performance and redundancy but halves your disk capacity.
Mirror (RAID1 or RAID10) actually REDUCES number of IOPS. With read every spindle takes part in I/O request processing (assumimg I/O is big enough to cover the stripe) so you multiply IOPS and MBps on amount of spindles you have in a RAID group and all writes
need to go to the duplicated locations that's why READS are fast and WRITES are slow (1/2 of the read performance). This is absolutely basic thing and SoFS layered on top can do nothing to change this.
StarWind iSCSI SAN & NAS
Not wanting to put the cat amongst the pigeons, this isn't strictly true, RAID 1 and 10 give you the best IOP performance of any Raid group, this is why all the best performing SQL Cluster use RAID 10 for most of their storage requirements,
Features
RAID 0
RAID 1
RAID 1E
RAID 5
RAID 5EE
Minimum # Drives
2
2
3
3
4
Data Protection
No Protection
Single-drive
failure
Single-drive
failure
Single-drive
failure
Single-drive
failure
Read Performance
High
High
High
High
High
Write Performance
High
Medium
Medium
Low
Low
Read Performance (degraded)
N/A
Medium
High
Low
Low
Write Performance (degraded)
N/A
High
High
Low
Low
Capacity Utilization
100%
50%
50%
67% - 94%
50% - 88%
Typical Applications
High End Workstations, data
logging, real-time rendering, very transitory data
Operating System, transaction
databases
Operating system, transaction
databases
Data warehousing, web serving,
archiving
Data warehousing, web serving,
archiving -
Poor perfomance CORBA and EJB in Oracle 8i
Here are the perfomance results of methods invocations
(1000 invocations of empty method in an loop)
Oracle 8i CORBA ~100ms per method
Oracle 8i EJB ~100ms per method
Jonas EJB server ~5ms per method
Java RMI ~3ms per method
Why Oracle 8i is so slow, even compared with noncommercial
EJB server Jonas? Is there any way to speed this up? Source codes of perfomance testing programs available upon request.Oracle Jserver is quite fast and scalable. Nevertheless, there exists an important overhead in calling a CORBA or EJB method, so you should desing "heavy" functions in your EJB/CORBA objects. Instead of calling 10 times little methods, call one time a hevay one, and you'll find that JServer perforns very fast and reliably.
Best regards -
SA540-K9 poor perfomance?
We replaced a Linksys RV082 using two external a ADSL modems by a SA540-K9, we advice a very poor load balancing and a lot of desconnections, p.e. when we are using FTP, the connection was disconnected, we need to try several times to download files, I update the device to 1.1.42 and made FTP protocol binding to only one WAN interface but the problem still, and the performance is very poor. If I return the RV082 the load balancing and FTP downloads works fine. We thought it would improve with the SA540, but the result is worse.
Hi,
In your setup can you please let us know if are you using DNS as a failure detection method. If yes, can we either use none or use ping as a failure detection mechanism.
Also we would like to collect some logs from the SA540 router. Please log in to the SA540 router and in the URL type with IP address https://IP_address_of_SA540/scgi-bin/dbglog.cgi
These logs will also have configuration file, so if you would like to change passwords, please do. You can send these logs directly to me.
Thanks,
Nitin -
Hi,
There is a problem when device(speaker) is unplugged and plugged in Mac OS version 10.7.5
Every time unplug and plug the device over USB and re-plug, new interface is added in the list System Preferences->Network.
For example, if the device interface name is device20, when the device is plugged first time, system shows "device20" in the detected device list i..e in System Preferences->Network. But next time when unplugged and plug again the device name gets changed(device number gets incremented), i.e. "device21" will be displayed. So if repeatedly unplugged and plugged, the device number gets incremented everytime and added to the list as device22, device23,....etc. The list will grow with many entries if we repeatedly unplug and plug the device.
I am not sure why the system is behaving so. You help/support will be highly appreciated.
Thanks in advance.
- TejonathHi,
There is a problem when device(speaker) is unplugged and plugged in Mac OS version 10.7.5
Every time unplug and plug the device over USB and re-plug, new interface is added in the list System Preferences->Network.
For example, if the device interface name is device20, when the device is plugged first time, system shows "device20" in the detected device list i..e in System Preferences->Network. But next time when unplugged and plug again the device name gets changed(device number gets incremented), i.e. "device21" will be displayed. So if repeatedly unplugged and plugged, the device number gets incremented everytime and added to the list as device22, device23,....etc. The list will grow with many entries if we repeatedly unplug and plug the device.
I am not sure why the system is behaving so. You help/support will be highly appreciated.
Thanks in advance.
- Tejonath -
Hi Guys,
I have a poor performance when execute the transaction CON2(Module CO), so i spent the run in background mode.
And still having performance problems.
How can i improve the performance of this transaction ?
My environment
SAP: 4.7 SAPKH47027
OS: Solaris 5.9
Database: Oracle 9.2.0.8
Thanks!!!I think you are at the wrong forum. This is not about the performance of SAP systems but about "Enterprise performance management" software, which has nothing to do with the real performance of your SAP system
try this one Performance and Scalability
Edited by: Joost Hoppenbrouwers on Aug 6, 2008 4:18 PM -
OLAP over HTTP resulting in 503 status code and connection time out
Hi,
I set up my OLAP over HTTP with msmdpump.dll and set up the .ini file accordingly. The connections are fine,
however on my site when i make a lot of request to the OLAP, I get a 503 HTTP status code andconnection time
out in th event log.
I have change the #of threads on the .ini file for
msmdpump.dll. Also changed the initialconnectiontimeout in sql ini file from 10 to 15.
In my OLAP instance in sql studio, under datasources I made adjustments from forums but that did not affect.
in all instances i restarted the machine.
NOt sure where to look further and how i can diagnose what the issue is. Looking for any assistance to help me
resolve my issue.Hi,
we also had some problems after we made some Stresstests on the AS with many connections.
First we raised the Queue Length and the worker processes in the Application Pool.
Worked, but the recommendation was to do this at the last step.
So we changed the following entries in the ini of the Datapump:
<MinThreadPoolSize>60</MinThreadPoolSize>
<MaxThreadPoolSize>200</MaxThreadPoolSize>
<MaxThreadsPerClient>20</MaxThreadsPerClient>
Kr Jürgen -
Exporting movie 2nd time has resulted in poor quality picture...
Hi,
I edited my holiday video in iMovie HD and exported as "Quicktime-Full Quality" and it made a large DV file which looks great.
i tinkered around with project in iMovie as needed to add/remove a few things and exported again on same setting as above, but it now looks pixellated and nowhere near as sharp as the first copy.
Any tips on whats gone wrong? the only other thing i did in between these steps is also export it to iDVD for later burning, if that helps.
Thanks.Hi
YES - the only thing You did was using Share/Export to iDVD.
That's the problem. This is destructive ! ! !
iMovie rendering in this process gives a lousy result BUT ALSO HARMS THE ORIGINAL.
Medicine (but a bitter one).
• Re-import the photos to Your movie project (the old ones are damaged)
• Re-edit them to their propper places and duration
• NOW - When done. CLOSE iMovie
• Open iDVD and import Your movie project. Now iDVD will do the rendering and so much better.
Yours in Your Pain Bengt W -
Recent update has resulted in poor sound quality
Recent update from apple has spoilt sound quality. Any one else have same problem
I had poor music sound quality, ect, after installing Update 7.1.1. Issue was resolved by holding down Homebutton and power on/off button simultaneously until Apple logo appeared. Sound quality now perfect from my mini iPad .
Maybe you are looking for
-
How to pass values to XML complex type of a Webservice using PL/SQL
HI, I need to call a web service from PL/SQL that has an complex type element. That complex type element has 4 child elements each of integer type. I want to pass values for this complex type using SOAP_API.add_parameter but I can't understand how to
-
Airport Express refuses to update firmware
I have an airport express that seems to be stuck on the 7.4.1 firmware. Whether I try to upgrade to 7.4.2 or down to an older version, it always stays at 7.4.1. Any suggestions for how to fix this?
-
Help regarding event flow/event listening best practices
Hi, I'm making a flash memory card game to learn more about to actionscript. I have: - a main class that loads on start. This class instantiates a: - CardLoader class that imports graphical assets and uses these to create all my cards: - Card class t
-
Quick little pointer to anyone who comes across this issue like I did. I went from using the 10.4.2 version of OPM to the Cloud edition and during the process moved the installation directory. After this time I started receiving the following message
-
Hi SAP MM, We have set up Release strategy at PO based on value and Purchase organization. It is working fine for all types of PO except Frame work PO. As per system prospective it is working fine but as per business prospectiv