Connect 2 computers to ATV (2ndGen)
Can i connect 2 computers to my TV?
Up to now Home sharing is turned on, on both iMac and MacBook but Apple TV can only see and connect to 1 of them
Hi,
Your simply reply made me realise ! - check the library name !
It was identical on both Computers so i have changed it and i can now access both Computers from the TV.
THANKS for the reply.
Similar Messages
-
How to see the connected computers in to my network?
Hello I am just curios How can I see the connected computers to my network? I also want to remove them from my network
onqun wrote:
Hello I am just curios How can I see the connected computers to my network?
If you have an Apple AirPort base station, you can launch AirPort Utility, put it in to "manual setup" mode for your base station, then click on "Wireless Clients" in the Summary panel.
I also want to remove them from my network
If you're asking for advice on how to do that, I'd first change (or implement) a network password. If that isn't good enough, look at the "Access Control" tab of the "AirPort" panel. -
SIU "Apply system configuration settings" and Connect computers to directory servers
Good morning/Afternoon/Evening everyone.
I've currently been studying/researching imaging with OSX 10.9 server, using the SIU. As I'm going through it, one option that is appealing to me, is the "COnnect computers to directory servers:" option under the Apply System configuration settings workflow action.
The issue is that when click on the + to add a server, it only comes up with Localhost (127.0.0.1) and won't give me the option to point to my OD server for binding. Is there a way to change this, or some other option I am missing?
Also, I'm at a loss to find any setting in Profile manager that will enable/turn on "Remote management" for ARD and SSH.Thank you for that link, it is insightful. So let me throw this into the mix:
When it comes to ARD, we have to have a local user on the local machine, in order to login, correct? It won't allow us to have OD authenticated admins/users login to the client machine. Is that correct?
If that is the scenario, then how are we to lock down a situation where we are imaging multiple macs and have the potential to have admins changing or leaving, and a need to reset local machine admin credentials. Obviously we aren't going to do this individually per machine. This would also need to be done via scripting (or ARD CLI to our enterprise), but then each image needs to be updated or all new machines need to be touched after image/install.
Am I thinking of this the correct way?
Also, is it possible to create an image that has no local user at all, or is that just nonsense? -
Blinking images of icons on connected computers
Blinking images of icons on connected computers
I'm having a very strange experience with my MacPro when connected to our other two computers via Ethernet. Whether I am connected to the central backup Ethernet drive or one of the other computers (a Mac G5 DP 2 Ghz and a Mac G4 DP 1 Ghz) the desktop "blinks" as though it is continually refreshing the icons of the files and folders. The Preview image and the file's size, likewise keeps blinking, about once every 5-6 seconds. I have occasional sieze-ups with the Network printer and crashes while transferring files to another of the computers.
The problem is new and the Ethernet Network is not, I thought I had a faulty cable but after changing the cable from the MacPro to the Switcher or Router (a 5 port SmartSwitch by NettCom) with a new one I find the problem still exists. BUT it is only one way! If I connect to the MacPro from the G4, for example, the blinking does not exist.
What could it be?Hi, it's me adding to my own question - I tried starting from my other drive, my backup drive, and the blinking happens then too (not surprising really since it is a CCCloner copy of the original) but then I started as ROOT, and the blinking doesn't happen at all. I then started (rebooted) to my e-drive (TTPro) and logged onto Network via Finder and the blinking doesn't happen there either, so, I'm beginning to think that I have some sort of conflict of applications that are causing it. I do have a number of what I think are called "hacksies", like Tinkertool and Onyx and TTC that not only work as Utilities but also allow you to "customise" the computer's behaviour and appearance, like whether the scroll arrows are together, or whether the Blob is visible. Maybe I have these in conflict?
Should I just un-install all these until I have a close to basic system? Or would I be better off trying OSX 10.4.11 and see if something changes that way? -
Simplest connection to run ATV from wireless PC?
Apologies in advance for such basic questions:-
I want to connect and use ATV with my LCD TV & receiver to primarily play music & photos & some videos stored in iTunes on my PC a few rooms away. I have read the apple store information as to what is needed to run ATV: ATV, Itunes, TV, cables, Router / Ethernet connection; etc.. However I do not currently run anything wireless, nor do I run a local network. Running a cable from my PC to the ATV is logistically NOT workable. In addition to buying ATV will I need to buy Airport Extreme [something else?]. If I purchase Airport Extreme can I plug my PC directly into it using one of it's Ethernet ports? and /or will I need to install a wireless card/adapter in my PC? If so can the card be installed via USB port? - hub connected?
All advice / suggestions greatfully appreciated. - "BASICUSER"
Intel 3Ghz PC Windows XPwill I need to buy Airport Extreme [something else?]. If I purchase Airport Extreme can I plug my PC directly into it using one of it's Ethernet ports?
Yes
It doesn't have to be an airport extreme of course, but it will need wired and wifi connections just like the extreme if you want a wired connection to your PC to avoid fitting wifi cards. -
Can't connect computers to printer (b210) via network because there are "other networks"
I can't connect computers to printer (b210) via network because there are "other networks matching your network name". This makes no sense at all. I have several Apple devices (iPhone, iPad, iMac) all with the latest software. The printer works fine when using the USB connection to my iMac. Nothing I do seems to solve this problem (rebooting, re-configuring, etc.). Help.
Hi Cgold,
If there are other networks matching your network name, then the printer will have issues connecting when you run the wireless setup wizard.
However, there are other options:
If your router supports 'Wi-Fi Protected Setup' with either a button to push on the router, or a pin to enter, you can choose that connection option under the wireless menu on your printer.
or
Change the network name that your router is broadcasting within the web page of your router (NOTE-this would force you to re-join all wireless devices back to the new network name you have created).
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
HT202213 How do I connect computers on home sharing?
How do I connect computers on home sharing?
Im not sure what to do on this new version of Itunes.On one computer in itunes from the top menu
File > Home Sharing > Create Home Share Enter your apple id and create share
On the second computer
again File > Home Sharing> Create Home Share Use exactly the same apple id as the
first machine
On each machine to get the itunes 10 look and feel
View > ShowSidebar
Also Authorise each Machine with the other apple id Store > Authorise this computer
You should now have an orange house icon in the Shared section of your itunes -
A few days ago, I was working on a restoration of a 100-years-or-so-old Calculus book on one of my Linux based computers, while my other computer with the Microsoft Windows Vista operating system was serving as Broadcast TV receiver with its USB HDTV tuner
in the afternoon. The weather in Los Angeles was summer-like in November, with clear skies and 90 degree Fahrenheit temperatures. All of a sudden, my Linux based computer halted in the middle of the processing it had performed hundreds of times
before in hotter days. It would not restart. The entire boot block of the disk seemed to have been garbled. This did not seem even feasible at all, so I decided to shut its power off for a while. It came back up after a while,
and everything looked normal. Then, it did the same thing again. I decided to open its cover and check on its multiple fans as there was nothing else that could go wrong.
I then noticed that the computer with the Microsoft Windows Vista Operating system which had been receiving the broadcast TV, was displaying a freshly-booted log-in screen. It had "Blue-screened" while I was working on the other computer
across the large room. This again did not seem any feasible as there had been utterly no connection between these two computers. Even the AC power line circuit was different. Furthermore, this computer had the most extensive air-cooling system
I had built to have it work through 107 degree Fahrenheit temperatures indoors. Anyway, I logged back in and started the broadcast TV reception again. Sure enough, after a while it "blue-screened" one more time...
I went back to the Linux-based computer and found all of its fans operating, but with somewhat hotter disk drives. The problem was that in hotter days, the same computer had cooler disk drives with nothing different. I concluded that somehow
the 80 mm fan mounted in the front side of the case, with its side with rotating blades clamped on the perforated part of the steel case serving as the fan grill, was starting up fine. But, as the time passed the spring-loaded rotating hub was slowly
drawn toward the perforated steel case by two means: The partial vacuum formed by the suction generated by the blades of the fan, and by the magnetic attraction of the rotating hub with electro-magnets in it to the partially magnetized, perforated steel casing.
The first effect was always there, so it was not the real cause, but once something else came along, it really helped the latter. The hub was slowly drawn to the perforated steel casing due to magnetic attraction, with the holes in the casing
inducing a huge air-drag on the hub blades as there was no by-pass around to supply the extra-air needed to reduce the partial vacuum. In addition, the rotating hub with the electro-magnets now was very close to the conducting metal surface and the induced
eddy-currents in the metal by the moving electro-magnets had added even more drag on the rotating hub, causing it to come nearly to a halt. The disk drive electronics was heating up and was causing DMA access faults which in turn caused the Linux kernel
to panic and halt.
Well, this was nearly unbelievable, but true... I had not brought any magnets into the room and I still do not know how the computer case got magnetized. It has been working at the same location for years. The solution was to move the fan
away from the perforated steel casing a little so that some air could come in through the gaps on the sides of the fan (hence supplying a by-pass), reducing the partial vacuum in front of the fan. This kept the rotating hub far enough away to prevent
the massive induced eddy-current drag from slowing the fan down to a halt. The computer now works perfectly with the very same fan as it has had been doing for years.
The real solution is to saw the perforated part of the steel casing in front of the fan away, and to replace it with a better fan grill. The best fan grill material I have found is the finely perforated, thin, black aluminum sheet that is usually
used as a car audio speaker grill. In fact, I use these in my Microsoft Windows Vista based computer. The fans are quieter, with more air flow. It also keeps dust away and you can brush the collected dust off easily.
The next problem was the halting of the computer with the Microsoft Windows Vista operating system with a blue-screen. The fans in it could not be the cause of this, as it had already had the best improvements I could put in it, with even
externally powered fans that did not load the computer power supply. And, all of the fans were working well. In the meantime, the Microsoft November 2014 updates for the Microsoft Windows Vista came out, and as usual I told the computer to
load and to implement them. Sure enough, the computer again "blue-screened" in the middle of the update procedure.
That was somewhat too much, but there was nothing else I could do other than to debug it. I had not changed anything in the computer and its power supply, completely internally updated by myself a few years ago, was working perfectly. Whatever
was causing it was not in the hardware. It was not in the November 2014 software updates either as it "blue-screened" before those were announced. I brought the computer back up after several disk and other software checks and after the
completion of the updates, I gingerly turned the network modem on. I then sent the reports on the six failures (three "blue-screen" type failures and three "Anti-malware Executable" failures) to Microsoft with all of details
requested using the Microsoft Windows Vista problem reporting system. Within minutes, the Microsoft came up with a diagnosis that the USB driver code in the system had a serious bug. I had not changed this code in years. It suggested that
I should use the "Microsoft Fix-It" for this problem and it pointed to a link to download it. I did download it. It ran and the "blue-screen" problem just went away, as if it had never been there...
-- YektaI ordered the capacitors on Friday and they arrived on Monday, November 17, 2014. I removed the motherboard from the machine, by removing all PCI and AGP boards, drive and fan connectors and the computer power supply first. The motherboard then
simply unbolted from the case and came out with the CPU fan assembly still attached.
I wrapped the solder side of the motherboard with aluminum foil and set up a work place with the aluminum foil under the motherboard and myself electrically well grounded. Here came another surprise: There were four more capacitors of the same
kind just behind the CPU fan assembly and their tops were also deformed with one of them leaking the electrolyte inside from the the top. Luckily, I had ordered more than two capacitors to get the quantity discount and the lower rate of shipping.
I do use them in other circuits I occasionally build.
Technically, the only thing one needed to do was to unsolder the six old capacitors from the motherboard and to solder six new ones in in their place with the correct polarities. However, due to fact that the capacitors span the 3.3 V power plane and
the ground plane in the multi-layer motherboard, it is nearly impossible to unsolder these capacitors using regular, fine-tip soldering irons. The thick copper of the power and the ground planes carry the soldering iron heat away very fast, preventing
the solder from melting quickly. Continuous application of heat at this point will simply burn the internal insulating epoxy layers and cause shorts inside the motherboard which are impossible to fix in any reasonable amount of time.
The only reasonable way to remove these capacitors was to dismantle the capacitors from the top leaving their already soldered leads in place. The new capacitors were then tack soldered to these stubs using lead-free, hard solder. However, the
CPU fan assembly and the CPU itself had to be removed from the board to be able to work on these capacitors.
To dismantle the capacitors from the top, I first drilled small holes at the tops of the capacitors at the intersections of the indentations using the tip of a hobbyist's knife. I then used needle nosed pliers to peel back the triangular sections
of aluminum from the center at the tops to their bases at the top edges of the capacitors. Next, I removed the plastic layers covering the outside of the capacitors by scoring the plastic layers first from the bottom to the top using the tip of
the hobbyist's knife and peeling the plastic layers off starting at the cut. The following step was to cut the aluminum cans of the capacitors from the top to the bottom using the hobbyist's knife like a can opener. One could not use a saw like
tool here to accomplish the feat as the saws generated very fine metal chips which were very hard to remove and were certain to cause shorts in the densely populated mother board. The cans were then peeled off the rest of the capacitors starting from
the top at the cuts using needle nose pliers, revealing the spiral-wound metal-paper layers of the capacitors.
The wound layers of the capacitors were peeled off layer by layer by cutting into the layers from the top to the bottom, leaving only the two aluminum electrodes which were crimped and soldered to the leads of the capacitors. The picture below shows
the six capacitors with one of them dismantled (left) and with all of them dismantled (right):
The black disks below the aluminum electrodes are the rubber plugs covering the bottoms of the capacitors. The rubber plugs were then cut in half using the hobbyist's knife and removed using the needle nose pliers. It was not possible to
solder to the aluminum electrodes, so these were trimmed at the point they were crimped on the leads of the capacitors, leaving only the stubs of the capacitors' leads soldered to the motherboard.
The new capacitors with suitably trimmed leads were then soldered to these stubs with the correct polarities using lead-free, hard solder. The capacitors were lightly bonded together using a flexible glue to prevent them from moving. The picture
below shows the new capacitors as installed into the motherboard:
I then assembled everything back together and turned the computer on. The BIOS complained on the boot screen that the CPU was out of its socket and it needed to be reset. I set BIOS parameters correctly to their original values. The computer
came up and worked without any problems. I typed this message on my newly repaired computer running the Microsoft Windows Vista operating system.
By the way, the manufacturing date on the motherboard is 09/12/2002 and the CPU is a Socket-478, 2.4 GHz, Intel Pentium-4.
-- Yekta -
Unable to connect computers to a Windows Server 2012
I have two brand new Windows 7 Professional computers that I want to connect to a Windows Server 2012 Essentials. I'm able to download the connector software but when it is searching for the server I receive a message that "Cannot locate or identify
your server". I tried both with the IP and FQDN but neither works. I received in the server the following error message:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 3/31/2014 8:53:24 AM
Event time (UTC): 3/31/2014 12:53:24 PM
Event ID: 916a5b3024ce43549f54a925866b24d9
Event sequence: 10
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/Connect-1-130407439956811749
Trust level: Full
Application Virtual Path: /Connect
Application Path: C:\Program Files\Windows Server\Bin\WebApps\Client\
Machine name: DRALHFS-01
Process information:
Process ID: 13760
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: HttpException
Exception message: The remote host closed the connection. The error code is 0x800704CD.
at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect)
at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush()
at System.Web.HttpResponse.Flush(Boolean finalFlush, Boolean async)
at Microsoft.WindowsServerSolutions.Client.Website.Default.TransmitFile(String filePath, String nameToTransmit, Boolean endResponse)
at Microsoft.WindowsServerSolutions.Client.Website.Default.RunComputerConnector(Object sender, EventArgs e)
at System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Request information:
Request URL: https://dralhfs-01:443/connect/default.aspx
Request path: /connect/default.aspx
User host address: 192.168.1.101
User:
Is authenticated: False
Authentication Type:
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
Thread ID: 8
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace: at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect)
at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush()
at System.Web.HttpResponse.Flush(Boolean finalFlush, Boolean async)
at Microsoft.WindowsServerSolutions.Client.Website.Default.TransmitFile(String filePath, String nameToTransmit, Boolean endResponse)
at Microsoft.WindowsServerSolutions.Client.Website.Default.RunComputerConnector(Object sender, EventArgs e)
at System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
This event entry appears every time I try to connect the machines. I have verified the DNS entries and resolution and it works correctly. Any advise will be greatly appreciated.
Thanks,
Hector M. DevarieHi Hector M.Devarie,
Would you please check if can ping the server successfully by using server name and IP address? Please temporarily
disable firewall and then connect to server again. And monitor the result.
You descript “I'm able to download the connector software”. Would you please let me know the complete error
message when can’t download. Or provide a screenshot, it will help me to understand this issue clearly.
By the way, please check if IIS run as normal in the server.
Hope this helps.
Best regards,
Justin Gu -
Traffic only allowed one-way for VPN connected computers
Hello,
I currently have an ASA 5505. I have set it up as a remote access SSL VPN. My computers can connect to the VPN just fine. They just can't access the internal LAN (192.168.250.0). They can't ping the inside interface of the ASA, or any of the machines. It seems like all traffic is blocked for them. The strange thing is that when someone is connected to the VPN, I can ping that VPN-connect machine from the ASA and other machines inside the LAN. It seems the traffic only allows one way. I have messed with ACL's with no avail. Any suggestions please?
DHCP Pool: 192.168.250.20-50 --> For LAN
VPN Pool: 192.168.250.100 and 192.168.250.101
Outside interface grabs DHCP from modem
Inside interface: 192.168.1.1
Current Running Config:
: Saved
ASA Version 8.2(5)
hostname HardmanASA
enable password ###### encrypted
passwd ####### encrypted
names
interface Ethernet0/0
switchport access vlan 20
interface Ethernet0/1
switchport access vlan 10
interface Ethernet0/2
switchport access vlan 10
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 10
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan10
nameif inside
security-level 100
ip address 192.168.250.1 255.255.255.0
interface Vlan20
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
pager lines 24
mtu inside 1500
mtu outside 1500
ip local pool VPN_Pool 192.168.250.100-192.168.250.101 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 10 interface
nat (inside) 10 192.168.250.0 255.255.255.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.250.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.250.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd dns 8.8.8.8
dhcpd address 192.168.250.20-192.168.250.50 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
svc image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 8.8.8.8
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
tunnel-group AnyConnect type remote-access
tunnel-group AnyConnect general-attributes
address-pool VPN_Pool
tunnel-group AnyConnect webvpn-attributes
group-alias AnyConnect enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:30fadff4b400e42e73e17167828e046f
: endHello,
I seem to be having the same kind of issue although I cannot ping from either end.
Ive set up a l2tp/ipsec vpn which I am able to connect to and get ip from my ip pool (radius authentication is working).
I tried running:
access-list NAT_0 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
nat (inside) 0 access-list NAT_0
but i get an error msg saying that the syntax of the nat command is deprecated. Im running ASA version 8.4.
Ive fiddled around abit to find the correct syntax but have been unsuccessfull so far.
Any help would be much appreciated
This is a part of my config:
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network AD1
host 192.168.1.31
description AD/RADIUS
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network vpn_hosts
subnet 192.168.2.0 255.255.255.0
access-list AD_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list split-acl standard permit 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.1.0 255.255.255.0
access-list inside_0_outbound extended permit ip object NETWORK_OBJ_192.168.1.0_24 object vpn_hosts
ip local pool POOL2 192.168.2.2-192.168.2.10 mask 255.255.255.0
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static vpn_hosts vpn_hosts
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 ########## 1
no vpn-addr-assign aaa
no vpn-addr-assign dhcp -
How do I connect computers to same network?
I cannot figure out why my IMac and Macbook will not connect with each other so I can download files to my Macbook that was wiped out and is like a new computer. I'm trying to share files and internet and I'm unsure how to confirm that my computers are connected to the same network...what do I need to be sure to check? Thank you to anyone who understands this and can help!
Hi..
Help here > 3 Easy Ways to Share Files Between Macs -
Can iPhoto Libraries Swich between Connected Computers?
I’ve an iMac (10.5.8) and a MBA (10.6.8). Each has a iPhoto library. The one of the iMac is a big library, more than 9,000 images. The MBA has just a few hundred that I post or send on the road. The computers are connected via wifi, and the Pictures folders on each can be shared. Among the files in Pictures on each computer is its iPhoto Library, although I’ve never accessed the Libraries from the other computer.
The other day, when I opened the iPhoto Library on my iMac, up came the MBA Library. And then the MBA started having trouble because it reported that its start up disk was full. Sure enough the MBA iPhoto library was 7.29GBs. It had part or all of the iMac iPhoto Library. The libraries had switched. Seemingly on their own.
When I tried to switch to old library on iMac, I got warning that iPhoto library was locked. I had never locked any library. I unlocked it, but kept getting locked warning. Recovered iMac Library with TimeMachine. And physically deleted the MBA iPhoto library and emptied trash. Also for good measure, reduced size of MBA photo library.
So, I think everything is now OK. But what happen? And how? Losing 10 years’ images, even for just a few hours, was a scare.
Thanks in advance for help,
ArmandoNo I've never done that. In fact until this happened I didn't know that, for example, I could look at the iPhoto library on the iMac from the MBA. And it was both that switched. So, I would have made the same mistake on both the iMac and the MBA.
But importantly, then, if I don't ever try to open the other machine iPhoto library, the iPhotos libraries should not switch? -
Macbook Pro/iTunes won't connect to Airplay ATV
Hey guys,
I have a bit of a weird problem here and can't figure out what the issue can be. I have an Apple TV (2nd Generation) and a Macbook Pro (Early 2008) that won't connect through Airplay. I can see the ATV in my Airplay/speakers options but when I select it it just gives a prompt that says "Connecting to Apple TV" for about 2 minutes. After that the message disappears and I find my iTunes is still not connected to ATV.
Now here's the odd part... ATV can play my library through Home Sharing just fine. My iPhone 4, as well as my wife's Macbook (white 2008) both connect fine through Airplay too.
The only thing that has recently changed in my setup is a new router (Sitecom WLR-4000). I've tried rebooting that, also tried turning off IPv6 on my MBP but both didn't change a thing.
Anybody have a possible solution??It seems like I have located the issue. I went on the Macbook and checked the IPv6 settings (in Lion) and for some reason these said 'off', an option that Lion typically doesn't give. After turning IPv6 on, the Airplay didn't connect on this computer either. Upon trying to turn it off, the 'off' option had disappeared.
Then I found a discussion elsewhere on this forum detailing how to manually turn off IPv6 completely within Lion and it did the trick. Both for the Macbook Pro and Macbook.
Hopefully that was it. It's still odd as I'm still wondering what exactly in the router is blocking it from working, so if someone on here has an idea that's more than welcome.
Here's the explanation to turning off IPv6 for whoever needs it:
https://discussions.apple.com/thread/3202188?start=0&tstart=0 -
Accessing the HDD connected in the aTV from laptop
Hi,
Sorry if this is anwsered somewhere already, I've been looking for an answer and nothing comes up... I currently have a old Boxee Box at home and I'm thinking of replacing it with an Apple TV 3rd Gen. Right now, I'm using the Boxee Box as a NAS. I have an External HDD connected to it, and I can access the drive from the Boxee Box IP address.
Can I do the same thing with the aTV? I would connect the external HDD to the aTV, access it from my Macbook and make my iTunes library on it,
Thanks!Oh there is no USB port to it? I mean, I thought I could've plugged the HDD in one of the USB ports of the AppleTV, then access the drive with the AppleTV IP address.
-
SQL Plus cannot connect (computers connected via DSL router)
Hi!
I have two computers connected locally via DSL router. One's IP is 192.168.1.64 and the other's IP is 192.168.1.65.
I try to connect to 192.168.1.64 via SQL plus from 192.168.1.66 by issuing the following command: sqlplus system@"192.168.1.64/orcl.168.1.100" and receive this error: "ORA-12170: TNS: Connect timeout occurred." I thought it was Windows default firewall that caused this and therefore changed windows' firewall settings in 192.168.1.64 by adding port 1521 into windows' firewall list. Now I receive this error: "ORA-12541: TNS:no listener."
Edited by: totalnewby on Jun 12, 2010 10:53 AMtotalnewby wrote:
Hi!
I have two computers connected locally via DSL router. One's IP is 192.168.1.64 and the other's IP is 192.168.1.65.
I try to connect to 192.168.1.64 via SQL plus from 192.168.1.66 by issuing the following command: sqlplus system@"192.168.1.64/orcl.168.1.100" and receive this error: "ORA-12170: TNS: Connect timeout occurred." I thought it was Windows default firewall that caused this and therefore changed windows' firewall settings in 192.168.1.64 by adding port 1521 into windows' firewall list. Now I receive this error: "ORA-12541: TNS:no listener."
Edited by: totalnewby on Jun 12, 2010 10:53 AM=================================
Assume you have the following in your tnsnames.ora:
larry =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = curley)
Now, when you issue a connect, say like this:
$> sqlplus scott/tiger@larry
tns will look in your tnsnames.ora for an entry called 'larry'. Next, tns sends a request to (PORT = 1521) on (HOST = myhost) using (PROTOCOL = TCP), asking for a connection to (SERVICE_NAME = curley).
Where is (HOST = myhost) on the network? When the request gets passed from tns to the next layer in the network stack, the name 'myhost' will get resolved to an IP address, either via a local 'hosts' file, via DNS, or possibly other less used mechanisms. You can also hard-code the ip address (HOST = 123.456.789.101) in the tnsnames.ora.
Next, the request arrives at port 1521 on myhost. Hopefully, there is a listener on myhost configured to listen on port 1521, and that listener knows about SERVICE_NAME = curley. If so, you'll be connected.
A couple of important points.
First, the listener is a server side only process. It's entire purpose in life is the receive requests for connections to databases and set up those connections. Once the connection is established, the listener is out of the picture. It creates the connection. It doesn't sustain the connection. One listener, running from one oracle home, listening on a single port, will serve multiple database instances of multiple versions running from multiple homes. It is an unnecessary complexity to try to have multiple listeners. That would be like the telephone company building a separate switchboard for each customer.
Second, the tnsnames.ora file is a client side issue. It's purpose is for address resolution - the tns equivalent of the 'hosts' file further down the network stack. The only reason it exists on a host machine is because that machine can also run client processes.
What can go wrong?
First, there may not be an entry for 'larry' in your tnsnames. In that case you get "ORA-12154: TNS:could not resolve the connect identifier specified" No need to go looking for a problem on the host, with the listener, etc. If you can't place a telephone call because you don't know the number (can't find your telephone directory (tnsnames.ora) or can't find the party you are looking for listed in it (no entry for larry)) you don't look for problems at the telephone switchboard.
Maybe the entry for larry was found, but myhost couldn't be resolved to an IP address (say there was no entry for myhost in the local hosts file). This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe there was an entry for myserver in the local hosts file, but it specified a bad IP address. This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe the IP was good, but there is no listener running: "ORA-12541: TNS:no listener"
Maybe the IP was good, there is a listener at myhost, but it is listening on a different port. "ORA-12560: TNS:protocol adapter error"
Maybe the IP was good, there is a listener at myhost, it is listening on the specified port, but doesn't know about SERVICE_NAME = curley. "ORA-12514: TNS:listener does not currently know of service requested in connect descriptor"
=====================================
Maybe you are looking for
-
I have a use case where I need to use different download directories with different firefox profiles.I need to use this profiles in multiple linux machines. I need to have a relative path to my download directory with respect to the profile folder. E
-
New to Struts - logic:if error - am I not properly defining a bean?
I am going through what are for the most part simple Struts examples and tutorials on my company's Intranet. The example below should be testing against the pre-defined <logic:if> and <logic:or> statement values and spitting out either the 'one or mo
-
How do I fix updates in iPod Touch 4th generation?
I know I cannot update my iPod Touch to iOS 7. The App Store icon shows that there are three updates available, but when I go to the update page there are none shown. If I look at all updates I notice there are three apps in the list that show as nee
-
Charge status LED bug in new firmware
After updating my 2nd generation iPod shuffle firmware from version 1.0.2 (which it came with) to version 1.0.4, the status LED does not correctly indicate when the battery is fully charged anymore. According to the manual, the status LED should turn
-
Launchpad Error in ESS My Info in UI5
Hi, We have configured Self-Services Landing Page to be launched from within a Portal. We used SAP_EMPLOYEE_ESS_UI5_1 on HR Renewal 1. feature pack 4 system. We see the landing page with all lanes coming up but we are seeing the below error during la