Connect 2 iPads to windows server at the same time

I purchased two iPads to view files from windows server, purchased FileBrowser app from iTunes, works good with one iPad, but when tried to connect second iPad, couldn't do it because it was timing out, disconnected first iPad and second works fine, for some reason can not connect them both at the same time. Tried to use different logins, no luck, checked ips are different, any ideas ? Thanks

Is your credit card reader wired through the iPad through the charging port or headphone jack?
As of this moment, there is no dual link that will attach to the charging port that supports both a credit card reader and a barcode scanner.
If you're having problems with the bluetooth on the barcode scanner, I advise moving any electronics near the iPad, or any obstructions. Also, restart the bluetooth and repairing daily helps. On another note however, depending on what type of bluetooth your iPad aquires, (bluetooth 2.1 for iPad 1 and 2, or bluetooth 4.0 for iPad 3) it can limit the range how far you can use your barcode scanner and how fast it can transmit data. A safe distance in my opinion is between 5-10ft using the scanner or any bluetooth device from your iPad.
Hope this works!

Similar Messages

How can I connect to Oracle and SQL server at the same time?

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH

How can I delete photos from my iPad, iPhone, and laptop at the same time?

How can I delete photos from my iPad, iPhone, and laptop at the same time so I don't have to do it separately on each device?

Photos that were synced from your computer using iTunes can only be deleted by de-selecting them from the folder from where they were synced - and then re-syncing.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Photos Tab on the right.
If you want to remove all of the Photos - uncheck the Sync Photos from Heading
Click on Apply in the lower right corner of iTunes
If you are using iTunes 11 - this will be helpful, Setting up syncing in Windows.
http://support.apple.com/kb/PH12313

Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad

How to show a picture both on client and server at the same time (X11?)

Hi Guys
I want show a picture on my client as well as on the server(in another location) at the same time, pretty much like showing something both on laptop and on a projector. Assume I have a picture sssss.jpg on the server A1, if I want to open that picture to my client, I can simply to do the following from client A2:
xhost A1
telnet to and login A1
setenv DISPLAY "ipaddress of A2":0.0
Anyone can direct me how to show picture the client that I am sitting at an also show on the server at the same time?
Thanks

VNC would let you do that. With a shared connection, both machines could run a VNC client to the same session.
Darren

HT201236 I want to do something so simple that there are no instructions. I just need to have two windows open at the same time so I can transfer files from one to the other by drag

I want to transfer files from one device (or page ) to another by drag and drop , so i need two windows ope at the same time,
I know this can be done but I have forgotten how

Don't use any full screen options for any app that has them
Mount your device and double click on it to open it. Drag this window to the upper right of your Desktop and resize it to a bit less than half of your Desktop.
Open the next folder and position it on the lower left side and resize it so you can still see the previous window.

Can I do multiple installs on one server at the same time ?

Hi. we have a project where the basis group is under very tight deadlines. We are tasked with installing multiple SAP systems on the same server. Is it possible to install more than one SAP systems ( ie ERP, BI, EP, CRM ) on the same physical server at the same time. for example on analyst install ERP while at the same time another analyst do EP and so on.... Has anyone done that before and if so are there any issures. ( I put in a SAP note and got the response that this is not supported, but I just wanted to see if anyone had done it anyways )

Hi Dan,
Frankly simultaneous installations is not a great idea. There will be an enormous competition for resources. Then you also need to make available ports for carrying out the installations. Next it will involve high amount of coordination
What of course is more reasonable is the idea of hosting more than one SAP instance on the same physical server though again harware is a very important concern. It includes your hard disk space,memory,CPU and other generic hardware.
Please award points for useful answers.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer but unable to get bookmarks from old drives to new.

Installed new hard drive and windows 7 at the same time. Left old hard drives in computer, installed firefox however I have no idea in which file the old bookmarks are located. I still have the old files for firefox in the old drives.

Your "Firefox personal data", like bookmarks, are stored in your Profile folder in Firefox. See this support article about how to recover that data from that old hard drive and transfer it your your new Profile.
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

Recurring theme with the 4s losing alerts except for the phone ringing. Most complaints seem to center on the 7.1 upgrade. The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back. When you get the sound back, the volume buttons start to work again. Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.

Can you run Embedded PL/SQL Gateway and Oracle HTTP Server at the same time

Hi,
I know this will sound a bit odd but their is a business case for asking this. Can you run APEX via the Embedded PL/SQL Gateway and the Oracle HTTP Server at the same time? Would their be any security/stability/etc issues I'd need to worry about? I know that I'll need to run them on different ports.
Thank you,
Martin Giffy D'Souza
[http://apex-smb.blogspot.com/]

I think I've done this in the past. Theres no technical reason why you can't do this as far as I know.
I can't remember if I used different ports or same port.

When i open my firefox browser i get alot of windows opening at the same time

when i open my firefox browser i get alot of windows opening at the same time , this just started a couple of days ago , it is really annoying how do i fix this problem? this is the website that attacks my browser ... http://hosting.adjug.com/AdJugSearch/Results.aspx?ivi=V5PU&aid=1591&slid=116515&CacheBuster=81841886
== This happened ==
Every time Firefox opened
== july 1st 2010

The site adjug.com is a hosting site for advertising. See: http://www.robtex.com/r/x?q=adjug.com
Check your home page settings to see if they are correct: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
You may have been infected by some malware.
'''Check for Malware'''
Install, update and run these programs in this order. They are all free for personal use, but some have limited functionality in the "free mode", but those are features you really don't need to find and remove the problem that you have. ('''Not all programs detect the same Malware.''')
Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
SuperAntispyware - http://www.superantispyware.com/
AdAware - http://www.lavasoftusa.com/software/adaware/
Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
Windows Defender - http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
Dr. Web Cureit - http://www.freedrweb.com/cureit/
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help:
http://bleepingcomputer.com
http://www.spywareinfoforum.com/
http://www.spywarewarrior.com/index.php
http://forum.aumha.org/
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''You''' ~~red:'''MAY'''~~ '''need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Start > Program Files, find and click Adobe Reader to open, click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer.
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Two Calendar Windows open at the same time?

I would like to have two calendar windows open at the same time (with different months shown). Is this possible?

Nancy,
That is not possible with the current version of iCal.
If you find a need for that feature, I would invite you to Provide iCal Feedback.
;~)

When i have 4 or 5 browser windows open at the same time, sometimes they get grouped into one tab and i can not ungroup them. why does this happen?

4 or 5 browser windows open at the same time. Tabs are down in the control bar. every now and then they just combine into one pop up. can't undo and very annoying. Have to close all out and start over.

This can happen if you drag a tab slightly down in the browser window while clicking.
Firefox has a feature called tear-off tabs
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.
You can also do this via the right-click context menu of a tab: Move to New Window
You can drag that tab back to the tab bar in the original window to undo that detaching.
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

How do we keep the panels and the icons windows open at the same time?

Hi, I was watching a tutorial and noticed that he had the panels and icons window open at the same time as seen in this picture:
When ever I click the arrow on the right it removes one of these panels from my view.
How do I do this?

Navigator to layers is a 2nd column. The double arrow is bascially a collapse button. In the screenshot you show has column 1 of windows is collpased, and column 2 is uncollapsed.

I want to have 2 windows open at the same time using Windows7

Using any application, I want to have 2 windows open at the same time - 1 excel sheet & 1 Word document, or 2 diff pages from Blackboard, or email & Blackboard. How do I do this. Multiple tabs show, but only one will display

Are you saying that you can't open a new window using {Ctrl + N} or with File > New Window?
If so, something added to Firefox is blocking the opening of new windows, and you need to do a little troubleshooting to discover what is causing that fault.
Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Connect 2 iPads to windows server at the same time

Similar Messages

Maybe you are looking for