Connect 2 monitors to HP Desktop (HP Pavilion 500-130d)

I would like to connect 2 monitors to this desktop (HP Pavilion 500-130d), 1 via DVI and 1 via VGA
Is this possible?
thanks!

Hi,
Cables made by different manufacturers may deliver different results but the shorter cables say under 15" should produce the same quality signals.  HDMI has different specifications for the different version levels.
I have yet to see any difference in picture quality between DVI-D and HDMI with a resolution of 1920 by 1080. If the color depth is greater than 24 bits using DVI then need to use DVI dual link to keep up with HDMI.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

  • Enable hardware virtualizacion in PC Desktop HP Pavilion 500-119es

    Hi everyone,
    i have windows 8 in
    Intel Icore i7-4770 CPU 3.40GHz
    im trying to enable hardware virtualization in bios  , i could'nt find that option.  i need virtualization for virtualbox machinne.
    regards
    This question was solved.
    View Solution.

    Hi:
    See if you have a setting in the same place as this picture...

  • CONNECTION OF SPEAKERS TO PAVILION 500 SERIES DESKTOP

    Just bought first desktop PC a Pavilion 500-312ns desktop that came with a Pavilion 22xi  monitor and all seemed fine until i realised that  the monitor has no speakers or  any options to do so .So my question is  how can i connect speakers to the desktop ?. Can i use cabled speakers  or would  Bluetooth or wireless be the better option ?.
       Now i understand that to some of you this may seem like a stupid question to  ask but i would appreciate any help or advice i receive .

    Hi,
    It does not have Bluetooth.
    (a) You can connect speakers using connectors at the back:
    Рис. 7: Back I/O ports
    1 - USB 2.0: 2
    2 - S/PDIF
    3 - VGA
    4 - DVI-D
    5 - LAN
    6 - USB 2.0: 2
    7 - USB 3.0: 2
    8 - Audio: Center/Subwoofer port (yellow orange)
    9 - Audio: Rear Speaker Out port (black)
    10 - Audio: Side Speaker Out port (gray)
    11 - Audio: Line In port (light blue)
    12 - Audio: Line Out port (lime)
    13 - Audio: Microphone port (pink)
    (b) Or you can connect using Bluetooth but you need to buy a Bluetooth USB dongle & your speaker MUST support BT:
         http://www.officeworks.com.au/shop/officeworks/tar​gus-bluetooth-4-0-usb-adapter-taacb75au
    Regards.
    Updated: By the way, you still need more hardware to connect to speakers on the monitor because your computer does not have HDMI port.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Connecting 5.1 speakers to pavilion 500-366na desktop

    Have pavilion 500-366na where spec says 5.1 spec supported. However, only 1 sound out (excluding headphones) and 5.1 has 3 jacks for the 5 speakers and 1 subwoofer. Can this PC really support genuine 5.1?

    Good morning, did you install a sound card or are you using the onboard sound that came with your system?
    Did your speakers 5.1 system come with instrutions showing how to plug into the back of your pc?
    What brand/model are the speakers?
    It's very likely just a minor issue, I recently bought at half price the Logitech Z906 system that came with 3 plugs. It showed where each plug should go at the back of the HP pc I have.
    Using pc's since 82. First pc bought 1988. Every day I'm still learning new things about computing.

  • Add a Second Hard Drive to a Pavilion 500-314 Desktop

    I have just purchased a Pavilion 500-314 desktop and desire to add a second SATA hard drive from the computer it is replacing.  When I open the case I find four SATA connections but nowhere to physically mount the second hard drive.  The drive bay is large and basically empty with the included hard drive mounted to the drive bay cage.  There are no slots for additional drives.  When I called HP I was told this chassis supports only one drive even though it has four SATA connectors on the motherboard.  Is there an adapter that can be purchased to create additional slots or am I out of luck with additional internal drives?

    Hi,
    Few weeks back, one user decided to go to a hardware store to buy brackets himself and problem solved. You may want to follow his method.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Pavilion 500-336 Desktop PC not recognizing NVidia GeForce GT610 graphics card

    I recently purchased a HP Pavilion 500-336 Desktop PC and I already had a EVGA NVDIA GeForce GT610 graphics card.  When I try and install the graphicas card, I get the 6 beeps. So, I googled the problem and somebody had suggested to disable hyperthreading in the BIOS and go to legacy mode from UEFI mode which I did as well. 
    However, my monitor still doesn't turn on and goes to power saving mode. Please help. The customer service rep said the power supply needs to be upgraded, but I don't think this is true. This graphics card is not that power hungry. 
    Here are the specifications of my desktop: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c04345595
    And here are the specifications of my video card: http://www.geforce.com/hardware/desktop-gpus/geforce-gt-610/specifications
    Thanks in advance. 

    Hi:
    You do not disable hyperthreading in the BIOS.  I recommend you go back and enable that setting.
    Please see this document for what settings you need to change in the BIOS when you install a non-HP video card...
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03653200&lc=en&jumpid=reg_r1002_us...

  • USB CARD READER FOR HP PAVILION 500-C60 DESKTOP?

    I have a new HP Pavilion 500-C60 desktop computer, but the front panel card reader does not accept the larger Compact Flash (CF) flash card.  I do have an older USB multi-card reader with four differing card slots, one of which accepts the CF card.  Would this arrangement work satisfactorly?
    Thanks,
    shamrock838
    This question was solved.
    View Solution.

    Hello @shamrock838,
    I understand that your HP Pavilion 500-c60 Desktop PC does not support the larger Compact Flash Memory Card and you are inquiring as to whether or not you can install a USB multi-card reader that accepts the CF Memory Card. First, you are correct the 7-in1 Multimedia Card Reader you do have installed does not support the CF Memory Card, but it does support the following cards:
    Secure Digital™ (SD)
    Secure Digital High Capacity (SDHC)
    SDXC
    Memory Stick
    Memory Stick Select
    Memory Stick PRO
    Memory Stick MagicGate
    I do not see why you cannot connect the 4-in1 USB multi-card reader that you have. As long as the operating system detects it and installs it you should be fine.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HP Pavilion 500-018 Desktop PC DVD Drive not working

    I have a HP Pavilion 500-018 Desktop PC with windows 8.1.  For some reason, the CD-ROM drive has stopped working.  When I put a disk in to install new software, it does not recognize that there is a disk in the drive.  I've tried updating the driver, etc.  Even in the file explorer, the drive does not show up.  About the only thing I can do it eject the disk.
    Any help would be most appreciated.

    Hello officeh2h -
    It sounds like windows is not recognizing the CD/DVD drive.  Click here  to view a document that addresses this problem.
    I hope this takes care of it for you.
    Cheers,
    dhtp
    Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
    DH
    I work on behalf of HP.
    Please click "KUDOS Thumbs Up" if I have helped you, and click "Accept as Solution" if your problem is solved. Thanks for the feedback!

  • How can I replace a 5 in 1 memory card reader in a HP Pavilion 500-027c Desktop PC

    I bought a refurbished HP Pavilion 500-027c Desktop PC computer from walmart 2 weeks ago... The 5-in-1 memory card reader does not work... the device manager says that it is working properly but when I put in a memory card nothing happens... The white light comes on indicating that the memory card has been inserted but the computer does not recognize that anything has been done... I would like to just replace the card reader itself... I see on hp support where it is possible to replace the memory card reader (front I/O), but I don't know where to purchase the actual card reader itself... I don't have any specs on the card reader either.... PLEASE HELP!!!!
    This question was solved.
    View Solution.

    Thanks that page really helped out alot.  And the card is a SDHC memory card.  Now I just need to look into ordering part # 713240-003. How would I go about doing that anyways?
    I bought it refurbished walmart and it had a 14 day warranty... Is there any type of manufacturer warranty?

  • I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??

    I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??

    Hi ashleydanc588,
    If you are interested in more information on using an iMac in Target Display Mode, including what machines are compatible, you may find the following article helpful:
    Target Display Mode: Frequently Asked Questions (FAQ)
    http://support.apple.com/kb/ht3924
    Regards,
    - Brenden

  • Upgrading graphics card for Pavilion 500-314 Desktop PC

    I am looking to upgrade the graphics card in my HP Pavilion 500-314 Desktop PC. I was looking around and saw some forums that said it would be very difficult to do so with this PC and I have found a few that said it is absolutly possible. Unforunatly none of those forum posts were from this site except one that did not give much explanation, so I figured I would just ask.
    The graphics card that comes with this PC is decent enough to run most current games, just not at the level I would prefer. I am not looking for the most cutting edge ultra mega super gamer graphics card, just something this PC can handle that would be an upgrade with 2GB dedicated vram.
    Thank you in advance for any help you guys can give me!
    PS This will be my first upgrade I have ever done on a PC myself outside of the ram on this same PC, so please try to keep that in mind with any explanation/answer .

    Your system has UEFI BIOS, so you'll need to understand Secure Boot. Then read this to change settings.   For gaming, I would go here, and do the "Can I Run It" quiz.  Would recommend a Corsair 600W PSU.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Drivers For Pavilion 500-038d Desktop

    Recently I got this computer Pavilion 500-038d and it in windows 8 
    and then I downgrade it into windows 7 without checking the webs whether it suit for it or not
    now Im stuck in windows 7 (64 bits) and I got problem with the drivers 
    i mean i dont have any drivers at all
    can anyone help me?
    I appreciate any help from anyone..
    Sorry for the broken english.
    Thanks!

    Hi:
    It looks like you can use the W7 x64 drivers and software from the below model which has the same motherboard as yours.
    http://support.hp.com/us-en/product/HP-Pavilion-p7-1300-Desktop-PC-series/5258500/model/5197677/driv...
    You would use the nVidia graphics drivers because your model has a nVidia graphics card.
    The only driver that I think won't work is the wireless card drivers there.  You need the driver for an atheros wireless card according to the picture on your PC's support page.
    So, see if this Atheros wireless card driver works...
    http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_119352_1

  • Suddenly no sound coming from HP Pavilion 500-339 Desktop

    I've had this computer less than a month without any issues. From a couple days ago there is no sound coming from any source (various speakers, headphone jack directly into computer).
    I have checked everything, i.e., checked all the external cables, used the Windows diagnostics and checked all sound devices, volume settings, checked for mute etc. No issues have been detected with the audio hardware and drivers.
    I've also done a system restore, removed recent Windows updates (within the week), uninstalled and reinstalled the IDT high-def audio drivers and still nothing.  Every time I do a diagnostic it says the audio is working properly yet no sound comes out for anything.
    Any help would be appreciated.

    Hello @Brian13,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your audio on your HP Pavilion 500-339 Desktop PC is not working. I am providing you with an HP Support document: Using Microsoft System Restore (Windows 8), which you can use to restore your computer back to a point in time where your sound worked correctly.
    If the Microsoft System Restore does not resolve your sound issue I would like you to use the HP Support document: Using Recovery Manager to Restore Software and Drivers (Windows 8) to put the original audio driver back in your computer. As this is the driver that came with your computer it should work correctly.
    If the above steps do not fix your sound issue I think we should try a backup and recovery of your computer. To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 8), which will ensure your personal files are up to date.
    ***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
    Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 8), which will you through recovering your computer back to factory settings.
    *** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
    If the above steps did not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Pavilion 500 VGA

    I have recently purchased a Pavilion 500-141ea desktop PC. It works fine exept that I can't find a VGA port. I am currently using the standard Pavilion 23xi monitor but wish to add a hp pavilion f1723 monitor to my arsenal. I would really enjoy some help.  ;-)

    Gene, welcome to the forum.
    Here are the Back I/O ports for the computer:
    Figure 7: Back I/O panel
    1 - USB 2.0: 2
    2 - Optical S/PDIF-out port
    3 - VGA
    4 - DVI-D
    5 - LAN
    6 - USB 2.0: 2
    7 - USB 3.0: 2
    8 - Audio: Center/Subwoofer port (yellow orange)
    9 - Audio: Rear Speaker Out port (black)
    10 - Audio: Side Speaker Out port (gray)
    11 - Audio: Line In port (light blue)
    12 - Audio: Line Out port (lime)
    13 - Audio: Microphone port (pink)
    Item #3 is the VGA port.
    Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Compatible Graphics Card (Pavilion 500-250ea).

    Quick question:
    I wish to connect my Pavilion  500-250ea to the HDMI connection on the monitor. Could somebody give me a list of low-cost compatible graphics card? I only want it so I can connect up via HDMI. No gaming or intensive graphics rendering.
    Thanks!
    Chris.

    Hi,
    Review this posted document.
    Try one of the below graphics cards.
    MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF
    HP Secure Boot Windows 8 Topics   Computer Does not Start After Installing a Video Card (Windows 8)
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

Maybe you are looking for

  • Menu look n feel -- mouse rollover effect.

    I am trying to get my menu listen to mouse events without going through the hassal of creating all the mouse listener objects (I've done that before, think that was a dumb way of doing java UI). Anyway, my search on this forum returns little result.

  • Problem regarding off-cycle payroll

    Hi experts, I have question about of-cycle payroll. This is the first time I want to run off cycle payroll 1.I hired one staff after payroll run this month. If 'mI using infotype 0267 , Do I have to maintain infotype 0008. For example, this staff sho

  • How to read BI data in ECC

    Dear, How could I read the BI data (BPS data) from infocube in ECC. Is there any specific retractor or any function module to read data in ECC from BI for LIS data. Regards, Balaram

  • Oops! Something went wrong.

    When trying to invite one external user, I get "Oops! Something went wrong" and I am unable to invite that person. However, I am able to invite other external users. Any suggestions

  • Keeps not responding

    Ok, so I had premiere pro installed. I started a project, and had it cut down to the good stuff. Then it started not responding. I closed premiere pro and opened the project again, as soon as the project loaded it would freeze again. This happened se