Connect 2 ViewSonic 21" monitors to MacBook Pro ?

Can I connect 2 ViewSonic 21" 1080p LED monitors to my MacBook Pro 2.9 GHz Intel Core i7, Mavericks? I own one 21" ViewSonic which I connected and it works fine and I would like to buy a second monitor of the same make and daisychain it. If this is possible, what cables do I need? TIA, Allan

The Belkin KVM is for connecting one display to two computers. It will not do what you want.
You could connect the second display via USB, but it will have limited performance.
<http://eshop.macsales.com/item/Newer%20Technology/VIDU2DVIA/>

Similar Messages

Which is best port for connecting external pc vga monitor to macbook pro

which is best port to connect my macbook pro to external via monitor?

not sure what you feel your options are most macbooks pro have a minidisplay port or a thunderbolt port which is the same connector
and all minidisplay -> hdmi or dvi or vga works

HT3964 connected new external monitor to macbook pro, was working but now have no power, black screen in laptop. monitor purchased with advice from tech and set up also. Worked fine for an hour and then quit

Have just connected a viewsonic external monitor to macbook pro 10.6.8, had everything up and running fine for about an hour then the macbook quit. No power (ws running off power source) Have I killed my macbook? Help!

Aha, all is good.
I went to Library/ColorSync/Profiles/Displays
and to home/Library/ColorSync/Profiles/Displays
and deleted all SyncMaster.icc files. I did leave behind one SyncMaster file in the home/../Displays which had an old date and I new was ok.
Rebooted, plugged in SyncMaster, and a new icc file was automatically created in the /Library/../Displays folder.
My display works normally, now.

Need help connecting Dell U2713HM monitor to MacBook Pro

What is the best way to connect a Dell U2713HM monitor to MacBook Pro OS 10.7.5 to maximize the resolution 2560 x 1440? I was using a VGA adapter on my old Viewsonic monitor that hooked into the Thunderbolt port, I think. When I use my old adapter with the new Dell monitor, it stops my Mac from responding and the monitor says it has no DVI connection. When I unplug the adapter from my Mac, it starts working again. I'm not very good with all these port options and descriptions so talk real slow, please.

1 Dual Link Digital Visual Interface connectors (DVI-D) with HDCP
1 DisplayPort 1.2 (DP)
1 High Definition Multimedia Interface (HDMI)
1 Video Graphics Array (VGA)
1 USB 3.0 upstream port
4 USB 3.0 downstream ports
Thank you!

How to connect an external monitor to macbook pro. The monitor has no usb connector without a usb

How to connect an external monitor to macbook pro. The monitor has no usb connecter, only a port.

Most MacBook Pro models have a Mini DVI port, a Mini DisplayPort or a ThunderBolt port for connecting an external display. USB does not have enough bandwidth to support a responsive display connection.
What model MacBook Pro do you have, by year, CPU speed or MacBook Pro 3.1 designation?

How to mirror to tv monitor using macbook pro 2012

how to mirror to tv monitor using macbook pro 2012. The airplay is not displayed anywhere except I Tunes which only plays what is on I Tunes.

Howdy there nell a-7,
It sounds like you are not seeing the Airplay icon in the menu bar on your Mac but you do see it in iTunes. I would use these steps from the following article to help troubleshoot the issue:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Try these steps first
Verify that your iOS device's software is up to date.
Verify your Apple TV's software is up to date.
Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
All AirPlay-enabled devices must be connected to the same Wi-Fi network.
Some Wi-Fi network configurations offer a Guest Network. On your Apple TV, go to Settings > General >Network and ensure that you're connecting to the same Wi-Fi network on your iOS device. On your iOS device, tap Setting > Wi-Fi and confirm that this matches your Apple TV.
If the AirPlay icon doesn't appear
Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.If you are still unable to see the AirPlay icon , try one of the following steps:
If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
Check Internet or network connectivity on all affected devices.
Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
Here is some additional information about Airplay for Mac:
About AirPlay Mirroring in OS X
http://support.apple.com/kb/HT5404
Thank you for using Apple Support Communities.
All the best,
Sterling

How do I connect an external microphone to a Macbook Pro with Retina display ?

How do I connect an external microphone to a Macbook Pro with Retina display ?
Alternatively how do I connect an audio input at a level that would normally have gone into a 'line input' socket ?

Plug it into the linein/headphone jack if there's just one. It'll switch between the two modes automatically depending on what you plug into it.

Connect my apple tv with my macbook pro

how can I connect my Apple TV to my macbook pro? When I try to select a blue tooth device I get a message error "there was an error connecting to the device"

It connects over your wifi. If you would like to mirror the display open System Preferences > Display > and ensure that airplay mirroring is set to on. First generation Apple TV's do not work with airplay

I don't have a TV ,How connect my apple TV to my macbook pro to watch the programs?

Hi,
I want to use apple TV with macbook pro .do i have to buy any special connecting cable?BTW I don't have TV set.
Thank you

How connect my apple TV to my macbook pro to watch the programs?
You cannot do this.
I want to use apple TV with macbook pro .do i have to buy any special connecting cable?BTW I don't have TV set.
You need a TV.
The MacBook connects tot eh AppleTV wirelessly.
The AppleTV is to play iTunes content from your MacBook on a TV.
"Apple TV gives you access to the best 1080p HD content — including blockbuster movies, hit TV shows, live sports, your music, photos, videos, and more — right on your widescreen TV. You can even play content from your iOS device or Mac on your TV using AirPlay."

How do I connect my Cinema Display to my MacBook Pro??? I have the dvi to vga display port thing and nothing works.

How do I connect my Cinema Display to my MacBook Pro??? I have the dvi to vga display port thing and nothing works.

What model (year) MacBook Pro? Depending on the model, it may have DVI, mini DisplayPort, Thunderbolt, or HDMI video connectors.
What model (yeasr) and size (17", 20". 22" ...) display. Depending on the model, it may have ADC, singlre-link DVI, dual-link DVI, or Mini DisplayPort connectors.

Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.

Hi!
Didn't know exactly where to direct this question in the Apple Community so I chose Airport. To everyone, thanks in advance.
I’m really desperate. I’m a big Apple fan. I have two Apple MacBook Pro laptops with Mountain Lion software. I also have an Apple Airport Extreme. My HP Photosmart C4780 printer was also purchased from Apple. Anyway, my Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
This appears to be an HP printer problem. I went to HP community support with the information below but I have received no solutions outside of buying a new printer.
“Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0.”
To be straightforward, I’m no computer tech so I don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve tried everything to reconfigure without success. If I need to make these changes via Airport Extreme Utility 6.0 not easy to find not that I know what I’m doing.
Most importantly if I ever get wireless working again, do I still need Airport Extreme connection or is the AT&T U-Verse modem/router sufficient?
Any direction or help is greatly appreciated. Thank you for listening.

Thank you for your prompt response. I'll be honest I'm a retiree and a newbie to all of this stuff. I don't even know how to do a thread. (Embarassing) This is my first ever contact with the Apple Community so I'm slowly trying to figure this out as well.
As to your thread request, I'm assuming you want to read my post with HP. Not knowing how to thread, I've copied it below.
I have an Apple MacBook Pro laptop with Mountain Lion software. I also have an Apple Airport Extreme. My Internet service is AT&T. AT&T just upgraded my service with a new modem/router (AT&T U-Verse). Prior to the conversion, my wireless printer connection was working perfectly.
Now can’t print wirelessly. For your information, everything is connected via Wi-Fi. The AT&T technician stated that I no longer needed my Apple Airport Extreme, so it was removed. Naturally, after the tech leaves, we find out the HP printer wirelessly no longer works. Thinking that removing Airport Extreme may have been the problem, I reconnected it to the AT&T modem/router, however no change.
Ran the HP wireless network test report and it states that HP printer can’t find wireless router and to verify that the HP printer network name (SSID) matches the wireless router network name (SSID) exactly. The Diagnostic Summary in brief: Wireless On & Working & Security – Pass; Network Name (SSID) Found – Fail. Nothing else under diagnostic summary ran. Under Configuration Summary: It shows old SSID name and Mac Hardware Address but no IP Address.
Next ran the Network Configuration Page and everything is enabled except the 802.11 Wireless. It shows status – disconnected. Under general information it states the following: Network status - Offline; Active Connection Type - None; URL(s) for Embedded Web Server – http://0.0.0.0
To be honest, don’t know what this means or where to find. The AT&T tech provided me the new SSID Name and a wireless key number but that’s it. Also I uninstalled and reinstalled via USB. The HP message states can’t find router. At this point, I’ve read your forum and tried everything to reconfigure without success. Any direction or help is greatly appreciated.
Thanks in advance!
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
I finally figured it out! (Sorry that I'm replying to my own posts btw, but I want to post the solution for anybody else with the SigmaplusEOL1 problem). If you have the SigmaplusEOL1 as your SSID when you print the "Wireless Network Test Report", you do NOT need to return it (I know that's hassle for people). To fix the problem, follow these steps.
1) Unplug your printer.
2) Go to your router's IP address (like 192.168.1.1 or whatever it is for your router).
3) Change the SSID of your wirelss network to "SigmaplusEOL1".
4) For the Security option for your wireless network select none (so that a password is not required to access your wireless network).
5) Power your printer back on and reprint "Wireless Network Test Repor". It should say "No problem found..."
6) The report should also have a the IP Address of the printer (under Configuration Summary at the bottom). Type that IP Address in your browser to get to the printer's settings page.
7) Click the "Network" Tab at the top.
8) Under the "Connections" header in the left pane, click "Wireless (802.11).
9) Click "Start Wizard" at the bottom right.
10) In the wizard, change the SSID and encryption (wep or wpsk) password to whatever you want your wireless network to be. So probably whatever it started out as before you changed the SSID to SigmaplusEOL1
11) Click "Finish" at the end. The page will probably try to keep loading but it won't because you changed the network settings of the printer. Just ignore that
12) Go back to your router's IP address and change the SSID and encryption password to whatever you changed the printer's SSID and password to.
13). Reprint the Wireless Network Test Report. It should say the SSID is the same as your wireless, and everything is good.
That's it. You should be good to go now.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Thank you for your prompt response. This has been a totally frustrating experience. I’ve spent at least 8 hours trying to fix this. My HP problems and your initial steps were identical to mine. I am by no means a tech person and my computer tech knowledge is minimal. However I followed your steps to the best of my ability.
I did get the SigmaplusEOL1 message. I was able to get to Step 6 where the wireless network test report now reads – “HP printer settings do not match your wireless router settings.” So I guess this is a step in the right direction. However unfortunately the Configuration summary message for the IP Address reads – “Not Applicable”. (Note: changing SigmaplusEOL1 to network name knocked out my Internet access. Had to switch back to regular network name to regain access.)
I’m at a loss as to what to do next.   Without the IP Address is it possible to move forward? As I stated earlier, I’m not a tech person. As to your steps 7, 8 and 9, I can’t find them on my computer or maybe I’m looking in the wrong places. In System Preferences - Network, I have none of these steps. If you’re referring to Airport Utility, with the changes in Mountain Lion, these steps are no longer there. If you’re talking about Safari, Firefox or HP, now I’m really lost.
Finally, I don’t know if you can answer this or not. If I ever get wireless working, do I still need Airport Extreme or is the AT&T U-Verse modem/router sufficient?
Again thank you for your time and patience.
Re: Can't connect wirelessly HP Photosmart C4780 to MacBook Pro OSX 10.8.2 Mountain Lion.
Unfortunately I am unable to offer any further advice as I only followed the instructions listed on the other page.
Finally, as to having WEP enabled, I don't know. Don't even know where to look. The best that I could determine is that my security is WPA/WPA2 Personal.
I'm truly sorry about all of this. Thank you for your time and patience. After reading all of this and you change your mind, I would understand.

How do i clean spots on monitor of macbook pro with retina display?

how do i clean spots on monitor of macbook pro with retina display?

Light alcohol cleaners, like what you use for camers lenses, works. Just do not have the soft cloth cleaning pad dripping wet ... dripping wet will allow fluid to get onto internal components.

I could not connect my canon MG5220 to my macbook pro version Mac OS X Lion 10.7.5.

i could not connect my canon MG5220 to my macbook pro version Mac OS X Lion 10.7.5. how could i connect wireless?

Contact Canon tech support or visit their support site for assistance as well as downloads of compatible drivers for Lion or later.
OS X Mavericks- Set up a printer
OS X- Printer and scanner software available for download

HT202731 Unstable operation when 2 or more USB devices connected to usb port on a MacBook Pro running Yosemite

I have tried connecting a number of devices to my MacBook Pro but I have found if I try to connect 2 or more using either usb ports or a usb hub the computer reports 'disk not ejected properly' and sometimes it will fail to recognise the device and remove it from the desktop or it stalls operation and I have to turn the computer off at the power button.
I have tried erasing the hard drive and reinstalling the operating system.
I have done various types of reset suggested by apple support.
The computer has been to an Apple dealer who has tested the hardware but found nothing due to the intermittent nature of the problem.
I have operated the computer with only the software originally installed on it present.
Could it be possible that a virus could be present on the usb devices I am trying to connect?
My computer is a MacBook Pro (13-inch, Mid 2012)
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Startup Disk Macintosh HD
Graphics Intel HD Graphics 4000 1024 MB
Operating System X Yosemite 10.10.1
Devices I have connected to USB ports all USB 3.0 compatible in a variety of combinations:-
7 port superspeed USB 3.0 hub (powered).
4 port Inateck USB 3.0 portable hub (not powered).
Buffalo ultra portable 500Gb USB 3.0 hard drive.
Seagate Expansion portable 500Gb USB 3.0 hard drive.
Seagate Expansion desktop 2Tb USB 3.0 hard drive (powered).
Seagate Expansion desktop 3Tb USB 3.0 hard drive (powered).
ScanDisk Cruiser Edge 16Gb USB stick.
ScanDisk Cruiser Edge 32Gb USB stick.
Hewlett Packard 16Gb USB stick. (This causes an instant crash now.)

Why?
- Because when I'm editing/ rendering lots of HD video everyday, I don't want to share system resources between virtual machines... I want the entire system's resources devoted to what I'm doing.
- I don't want to spend anymore money than I have to in order to buy one of the faster virtual systems. Not to mention, I've had a bad experience with Parralels in the past and I'd rather not use one again.
- I really don't want to clutter up my system anymore than I have to for a project that's only going to take a few weeks.
- I don't mind swapping hard drives... it takes two minutes, and I have an empty ssd just sitting on the shelf.
So, back to my original question. Can I just swap the computer's drives, then install Ubuntu on the second drive and be good to go without any harm to my MacBook Pro or OSX on the other drive (which wouldn't be connected when Ubuntu is running)?
Thanks.

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

Connect 2 ViewSonic 21" monitors to MacBook Pro ?

Similar Messages

Maybe you are looking for