Connect 2910-24G al with J9149A to Mellanox ConnectX MT26418
Hello there,
I've got a 2910-24G al with a HP 2-port 10GbE CX4 al Module (J9149A) and I'm trying to connect to a Mellanox ConnectX MT26418 card using a Gore InfiniBand cable 5m, but the port status stays always "Down". The module its selftest went fine.
While connecting 2 hosts with the same hardware just works well, it does not work with the setup above.
Curious: If I boot to an old firmware (W.14.38), the module information display the appropriate modul details. With the recent firmware available (W.15.13.0005) nothing is shown here, but the interfaces are displayed with both firmwares when using e.g. "show interface B1".
I've just searching around a couple of hours but I can't find any solution on this. Could it be the cable or is it not possible to connect this components at all?
Any help would be greatly appreciated.
Best
Similar Messages
-
My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.
The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao. -
WRT 120N- Cannot connect to the internet with more than one PC at a time.
Before I went on a three month vacation,I could connect 3 or 4 PC's either wireless or wired to my router with no problems at all.I have a desk top and a laptop computer which I use at home.After I returned,I found that I could connect to the internet with only one PC at a time.
If I was say,connected via my laptop,my desk top would continuously keep getting disconnected and vice versa.I have been reading the suggestions from experts here and have done a few checks based on them.I also cannot get to my router page which is 192.168.1.1 I keep getting a message that says "Problem Loading Page" and this happens with both,Firefox and Internet Explorer.I am running Windows 7 - 32 bit on my desk top and Vista Home Premium on my laptop.
I have opened the "Command Prompt" dialogue and pinged 192.168.1.1 and thereafter I typed in "ipconfig".These are the results:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\Gordon>ipconfig
Windows IP Configuration
PPP adapter Brownwolf:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 92.98.42.65
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 0.0.0.0
Ethernet adapter Local Area Connection* 22:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:35a2:8753:8832:f494
Site-local IPv6 Address . . . . . : fec0::c:35a2:8753:8832:f494%2
IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:35a2:8753:8832:f494
Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:a408:59a3:918e:f0ab
Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:a408:59a3:918e:f0ab
Link-local IPv6 Address . . . . . : fe80::35a2:8753:8832:f494%12
IPv4 Address. . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:413:cf4f:77af:474d
Site-local IPv6 Address . . . . . : fec0::c:413:cf4f:77af:474d%1
IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:413:cf4f:77af:474d
Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:1591:ad9:13da:8fea
Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:1591:ad9:13da:8fea
Link-local IPv6 Address . . . . . : fe80::413:cf4f:77af:474d%11
IPv4 Address. . . . . . . . . . . : 192.168.1.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : fe80::35a2:8753:8832:f494%11
192.168.1.1
Tunnel adapter Local Area Connection* 7:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 11:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 14:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 15:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 19:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 20:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41::5c62:2a41
Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
Tunnel adapter Local Area Connection* 23:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 24:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 28:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
I presume that this model is a modem **bleep** router as I do not have a separate modem with my system.I have a DSL connection and the firmware version of my router is ver.1.0.If I recall,I did upgrade to the next firmware upgrade a few months after I purchased the router but I am not sure.
I use both my PC's to run a small business venture and I am worried that resetting the router may cause some other problems and will stop me from using the internet.
The Command Prompt information above was taken from my laptop.
Any help will be really appreciated.
Gerard.
Solved!
Go to Solution.brownwolf66 wrote:
No,I have a desk top and a laptop and I cannot access 192.168.1.1 on either of them.In my OP,I have used the Command Prompt dialogue on both computers to ping 192.168.1.1 and I have attached the results.This is what I got:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
The results I obtained using ipconfig in the command prompt have already been mentioned in my OP.
I do not know if the above result is what it is supposed to be but I still cannot access my router's home page.How do I verify if there is a proxy server and if there is one,how do I disable it in my browsers?This problem occured suddenly as a few months earlier all was well.It's getting rather frustrating.
I suggest resetting the router. Make sure firmware is updated. You can download it here - http://homesupport.cisco.com/en-us/support/routers/WRT120N. After firmware upgrade, reset and reconfigure. Just access the link below to guide you setting up the router.
* Setting up a Linksys router for DSL Internet connection
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
* Setting up a Linksys router with Cable Internet service
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r... -
Can No Longer Connect Wirelessly to ITunes With My IPod Touch
While I can connect to the Internet with my IPod Touch through my router, I cannot seem to connect to ITunes wirelessly. My device only shows when I have it connected through the cable directly. The Apple help site hasn't been much good, as they suggested to completely uninstall ITunes (I followed their instructions implicitly) and re-install. Same problem. Not sure if this has anything to do with the new OS....but it's suspicious.
Diolacles wrote:
Not sure if I was included in this question, but I'll answer anyway. My computer that I have ITunes on is hard wired into the router, which makes sense since it's on my computer desk But as I said, wireless works fine so It's logically not the IPod, it's not the router, so it has to be either the new OS or ITunes.
I have Rogers Cable and a Cisco Modem/router.
How do you quote posts on here?
Yep, you were included...
To add a quote, click Reply, and at the top of the reply window is a tool bar. Click the icon to the right of the smiley face....
Funny thing is, my desktop is hard wired too, but for grins and giggles I put iTunes on one of my laptops, and used the laptop to reset my iPod to factory settings. Wireless synch still didn't work....
What really aggravates me is when you go to the KB to find out how to troubleshoot an issue, the articles are pretty much blank. Click here, set that, but no real explanation of how stuff works or what can cause it to break....
One thing I have noticed is the KB article says that after you tell iTunes to use Wireless Synch if you don not eject the deivce, it will stay connected when you unplug it... I never saw that behavior.... -
Hp pavilion ms235 how do I connect to a tv with a HDMI input?
how do I connect to a TV with a HDMI input? Can I use a USB graphics adapter?
Here are the specs for your HP Pavilion All-In-One MS235 Desktop Computer. Based on the specs, your computer doesn't appear to have a video output of any kind. A USB-to-video adapter such as the EVGA UV Plus+ UV39 will be required to connect your HDTV to your computer.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
How do I connect to Amazon prime with my Apple TV?
How do I connect to Amazon prime with my Apple TV?
There is no Amazon Prime app.
It is possible with an iOS device and the latest version of the Amazon Instant Video app to share the content to the ATV via AirPlay. -
How do I connect to the internet with my new IPAD ?
How do I connect to the internet with myt new Ipad
See here for connecting to the Internet:
http://support.apple.com/kb/HT1695
If you have any problems there is troubleshooting advice here: http://www.apple.com/support/ipad/wifi/ -
How do i connect to the internet with my ipad?
how do i connect to the internet with my ipad?
Did you turn WiFi on in the Settings App? If WiFi is turned on, your iPad should be able to see any WiFi networks that you can connect to and you should be able to tap on one of those, enter a password if needed and then tap the join button.
I get the feeling that you know this and the problem needs further explanation so ... Can you explain in more detail? -
How do i connect to the internet with apple tv
how do i connect to the internet with apple tv
Ethernet cable from your router, or configure wifi in Settings.
-
How do i connect my apple ID with itunes?
I keep on trying to sign into itunes with my apple id, but it never works . How do I connect my apple ID with itunes?
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.
You may find that when you try to do this, the password for your old ID it isn't accepted. If this happens, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password. -
How do I connect my time capsule with a Lynksis wi fi netwotk?
How do I connect my time capsule with a Lynksis wi fi netwotk?
You cannot extend or repeat a non-apple router in an apple router..
You must plug it in via ethernet and then setup roaming network (or if you like a completely separate network.. makes no difference from the TC point of view). TC is in bridge mode. That is router bridge not wireless bridge.. I gave the info on the other thread you are running.. very confusing when you ask in multiple threads. -
Hello,I am trying to connect to an MSSAS cube with a windows user ( and i need this user to be the end user that connect to the cube) from outside the domain.It will be .Net application.I use msmdpump.dll before but the thing is it impersonate the connection
so the user that connect to the Cube is not the real client user with is a problem for me because i like to manage the security throw roles.
SSRS is able to do what i am trying to achieve ( it ask you your domain user and password) then connect to the cube with these credential which is great,but i do that ?
With ADOMD.Net how do you provide windows user/password in the connection string ?
I tryed to only active windows security access with IIS and MSSAS but it's not working with a computer outside the domain even if in excel i provide a windows user/password.
VincentWith ADOMD.Net how do you provide windows user/password in the connection string ?
Hello Vincent,
See MSDN Connection String Properties (Analysis Services) for all available properties; addtitional: AdomdConnection.ConnectionString
Property =>
Olaf Helper
[ Blog] [ Xing] [ MVP] -
If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
How I can connect MBP early 2010 with a TV by HDMI
I have a MBP early 2011, with a Firewire 800 conecction, a thunderbolt conecction an 2 USB 2.0 Conex, so how can I connect a hdmi tv with my MBP, because my old DVI cable can´t connect. I don´t know if the miniDVI can connect in some port I have.
Thank YouTrue but read beyond the title to his question, says 2011 and a TB port. I guess it's which one you want to believe...
-
How to connect my macbook air with thunderbolt to tv via hdmi?
How to connect my macbook air with thunderbolt to tv via hdmi?
With this adapter. You will also need an HDMI cable.
The Thunderbolt port doubles as a mini DisplayPort on the MBA.
Maybe you are looking for
-
Setting up of Windows backup failing
I've added a 2TB USB drive (Western Digital MyBook) to a new 2012 Essentials server to allow Server Backup to perform a secondary (non-cloud) backup. The setup routine is failing during (or immediately after) formatting with the message "The system c
-
My wife's email has been getting filled with hundereds of emails with this in them this morning. I don't see where anyone else is having this problem today, but I wanted to see if it's on iCloud's end or ours. Processing errors occurred during delive
-
Adding 3 horizontal lines to a 2D Line flash chart
Hi I have a nice 2D Line flash chart. I would like to add three horizontal lines (they are constant values) on the graph. These lines are thresholds for the values displayed on the graph. I tried to add trhe series to the graph, it worlks well but th
-
I am trying to download Lightroom to my computer but it is not working out. I purchased a license for it, do I need a serial number or something?
-
First of all thank you in advance whomever may help me. Here's my issue: I am currently working on this site FiveStarTrumpet and I have a flash object at the very top of the page that will not show up. I have went and checked the page source and it's