Connect 4500X with spf+ twinax cables

Hi what would I need to connect the 4500X with spf+ twinax cables?

Double check the 10 Gbps transceiver compatibility list. Technically only the 1, 3 and 5m versions are supported.
I've used them all without any issue in the 4500X. No special commands are necessary.

Similar Messages

  • Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

    Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

    I misunderstood what Time Capsule is and had hoped for a wireless backup device that didn't have to be connected to the router.
    The TC is a wireless backup device.. it does not need to be connected to the main router..
    The problem is the computer.. not the TC.. the computer has only one wireless card.. if your current internet is by wireless.. then you must choose.. internet or backup.
    But my other suggestion will work.. get a wireless USB stick compatible with Mac OS.. there are plenty and cheap.. since you are in the same room as the TC they will work fine.. plug it in and load the driver.. taint hard.
    You should do the first backup by ethernet though.. wireless is too slow.. once you have that, you will do fine.
    Search ebay for wireless n usb.. Mac compatible..
    http://www.ebay.com/itm/New-EDUP-Mini-Wireless-11N-300M-USB-LAN-Card-WiFi-Adapte r-Nano-Card-Soft-AP-/150864362939?pt=US_USB_Wi_Fi_Adapters_Dongles&hash=item2320 377dbb#ht_3553wt_1165
    As you can see.. they are getting smaller and neater.
    I have no idea if it works .. haven't tried one.. but I have used USB wireless stick on the Mac to overcome this issue.
    You will need to set static IP .. not hard but you need to set specifics if you do buy one post again for the setup.

  • My Mac simply ignores my Iphone when I connect it with the USB cable. WHY? how Can I fix it?

    My Mac simply ignores my Iphone when I connect it with the USB cable. WHY? how Can I fix it?
    I was able to connect the first time, but after that my computer simply rejects the Iphone and nothing happens. The Iphone doesn't spin or try to reboot even! .
    WHAT to do? I got it today.

    When you say it ignores your iPhone, do you mean it does not appear in iTunes if you launch iTunes? Or it does not appear in Finder? Or does not appear in iPhoto? Or you get an error message?

  • I am trying to print off some work on my advent AW10 printer by connecting it with a usb cable to my macbook pro 13" 2011. On my laptop it keeps on saying printer failed. What do i do??

    I am trying to print off some work on my advent AW10 printer by connecting it with a usb cable to my macbook pro 13" 2011. On my laptop it keeps on saying printer failed. What do i do??

    Hello molad,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides troubleshooting tips that can help you solve the issue printing from your MacBook Pro. 
    Troubleshooting printer issues in OS X - Apple Support
    So long,
    -Jason

  • I have just get an apple tv but I could no configure my wifi, it does no appear any wifi name list, i connected it with an ethernet cable, but no with the wifi net, what sould i do

    I have just bought an apple tv, I have tried several times to confiure the wifi but no success, the wifi nets list does not appear, I have connected with an ethernet cable but not with the wifi net...what can I do? is it normal? am I missing something?

    Same thing here...Just bought it today, and only with the ethernet cable it worked...tryed to update it and now both wifi and ethernet won´t work...Any ideas?

  • Problem connecting mobile with PC by cable

    Hello, I'm a Nokia 3110 classic user. I have a problem with the connection from my 3110 classic to the PC. I use a Mini-USB cable (from my HP digicam). After I updated my PC Suite nothing works anymore. Reinstalling doesn't help, too. When I connect my mobile with the PC the driver installation assistant of Windows XP appears but the installation fails because there's a problem with the 'Nokia Phone Parent Driver'. What can I do? Plz help me to solve this problem :-(
    I know it's a bit imprecise but I hope for support :-)
    System:
    Windows XP SP2
    Nokia 3110 classic
    Connecting with connection cable
    Message Edited by dernamenlose on 24-Apr-2008 08:55 PM

    Nokia really need to sort this out. I too have the same problem, and posted in this same forum less than an hour ago!
    /discussions/board/message?board.id=connectivity&t​hread.id=15355
    Message Edited by basmic on 24-Apr-2008 08:12 PM
    5800 v20.0.012 -- 6500s v9.40 -- 6233 v5.43 -- 5140 v3.13

  • I need help connecting drums with MIDI-USB cable.

    I've been trying this for years, but I just don't know what to do or what I need to connect my electronic drums to GarageBand or any other MIDI programs, I pretty much connect the module and my mac with a MIDI to USB cable and nothing seems to recognize or detect any MIDI instruments or anything at all, does anyone know why or how to do this? If I need something or not? Thanks.

    So it's this one, I assume?
    http://www.hosatech.com/product/340344/USM-422/_/Tracklink_MIDI_to_USB_Interface
    You might have an old model (pre-2009:)
    NOTE: The earlier version of the USM-422 (pre 2009, light blue color) requires drivers for installation. Please visits our Downloads section http://www.hosatech.com/media/document/USM422_OldVersion_Vista_Install.pdf to obtain driver update and installation instructions.

  • Trouble connecting AEBS with Cox & Motorola cable modem

    I am able to set up my new AEBS however I cannot connect to internet. I am told via Airport Utility that I have set up correctly and have the steady green light and the wireless connection however it just won't pick up the Internet. I've called my ISP Cox Communications and they told me it's an issue w/my router. I noticed a similar problem in discussion boards with Comcast and followed the same instructions and it did not resolve. I've tried to power off cable modem for 10 sec, 2 min and 10 min and just no luck. I immediately plug back in my Linksys router and am able to connect to internet just fine.
    Anyone know what to do?

    Magand wrote:
    I've tried to power off cable modem for 10 sec, 2 min and 10 min and just no luck. I immediately plug back in my Linksys router and am able to connect to internet just fine.
    Anyone know what to do?
    Power off your cable modem for at leat 10 HOURS! Cox like every other ISP "caches" the MAC address of your router. The only way to "reset" this and allow a new MAC address to be accepted, is to turn off the cable modem overnight for 8-10 hours.
    Some routers have the ability to "clone" a previous router MAC address, therefore not requiring the above process, but the AEBSn does NOT have this capability.

  • Solution: WRT54GS connection porblem with a TV cable internet

    i had a problem connecting to a TV cable, i hade an error note: " the router is not able to connect to the DSL/cable internet, please turn the broad band modem off then on and try again"
    i solved this problem by using the"Easy Link Connect" programe of  "Easy Link Network Tools" support...the programe is very easy to use..the stpes are baby steps and it does everything automatically.
    thanks to Linksys support

    I have been able to connect. Pinging works fine. The problem I have is that it is inconsistant. I cannot relie on the ability to connect every time.
    I may be connected for several minutes and then disconnect. Come back several hours later and then can't connect.
    I feel I have navigated thru almost all the settings but have overlooked some little detail which is causing the inconsistancy.

  • Trying to connect 7250i with DKU-2 cable

    Title says it all.
    Bought a DKU-2 cable yesterday, downloaded PC Suite and have been trying to connect ever since then.
    It seems that this is a common problem, I get the USB error too.
    So how do I resolve this?
    Thanks in advance.

    You've got the wrong cable. 7250i uses the DKU-5 so DKU-2 doesn't work at all. I hope you can take it back to the store - did they tell you it would be compatible?
    And when you get the DKU-5, you need to install its driver first as they are not included in PC Suite.
    See 7250i cable info at
    http://www.nokia.co.uk/nokia/0,8764,33662,00.htmlMessage Edited by wicker_man on 25-Nov-2005
    01:20 PM
    All those who believe in psychokinesis raise my hand.

  • I just purchased a HP 8600 OfficeJet Pro, connected it with an USB cable, not responding.

    It is an HP OfficeJet Pro 8600,

    What operating system?  Did you change USB cables?  Do not use a USB hub, plug the printer directly into your computer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • TS1369 My ipod, i connect ti with a usb cabble and it always says that it is connected with a firewire and please connect it with a usb cable, What can i do?

    i dont know what to do and itunes doesnt recognise it

    There is a good chance something is lodged in your iPod's dock connector socket or some of its pins may be bent. I would still try to use compressed air to blow it out just in case and also double checked for any damage.
    Perhaps you can try resetting it as well. To do this, toggle the hold switch on and off, then press and hold the Select (Center) and Menu buttons together until the Apple logo appears.
    B-rock

  • HP 5510 printer - can it be connected with a USB cable

    I have a brand new HP5510 that will not connect wirelessly to my Compaq computer. I would like to connect it with a USB cable, but none was provided and there is a adhesive sticker over the USB port on the priunter that graphically says, "No USB"!
    I don't care how I connect, I just want it to work!

    Hi, I have 10.6.8 and an HP printer so it may be slightly different but I'll give it my best shot:
    Go to System Preferences.
    Click on "Print & Fax"
    Near the top of that page you should see "Print" and "Scan" options. Click "Scan"
    A button appears that says "open scanner"
    The settings are different between the different scanner models so I'm not sure what the next window will look like, but it should be pretty straightforward from there. It will scan to a JPEG image which you can attach to an email. I hope that helps! Let me know if there's anything ense I can help with.

  • MBP 2011 can't find harddrive (not problem with drive or cable)

    My early 2011 MBP 13" was running fine, then froze up. On restart I got the image of the folder with a question mark on it (the Mystery Folder) - the system couldn't find a drive to boot from.
    I took it to a genius bar and the, ahem, "genius" said the system couldn't find the drive because of a problem with the drive. "The drive's dead" he said. I hadn't backed it up, and was freaking out that I'd lose all my data. The only option he said Apple could do would be to take it away (for a week) and put a new hard drive in for £80. They'd take the old drive out, and I wouldn't get it back to try and recover the data.
    I asked about replacing the drive myself, as I've done that on PCs, and he said I could try it.
    I bought a new hard drive, and an external enclosure. I put the new hard drive in the MBP - Mystery Folder. I put the old drive in the external enclosure - it starts up! Everything still there, exactly as I left it when it froze. I clone the old hard drive onto the new one, try booting from the new drive in the MBP. Mystery Folder. I connect the new drive with an external enclosure - it starts up! And everything running fine.
    It's the cable, I hear you cry. So I ordered a new internal cable. Replaced it. Started it up. Mystery Folder.
    So, it's not the hard drive, it's not the cable. What is it?!

    Hi Ogelthorpe.
    That's right - I now have 2 hard drives, clones of each other.
    Both will boot when in an enclosure and connected with a USB.
    Neither will boot when inside the MBP.
    So it's not the drives that are the problem. Therefore it's an internal cable problem?
    I replaced the cable.
    Neither drive works when connected internally with the new cable.
    What else could it be that means the system can't see the hard drive when connected internally?

  • 10GE Twinax cables connecting to servers NIC which accept 10GE SFP+

    Anyone has any real life experience of using the Cisco 10GE Twinax cables to connect this to servers with NIC cards that accept SFP+? I'm talking servers like HP and Dell which have 10GE NIC cards. For the switch,  I would be using Nexus 5548UP. The SFP+ part number would be SFP-H10GB-ACU10M.
    The SFP-10G-SR is too expensive and I'm looking at 10GE Twinax cables as an alternative but am quite concerned about the compatability.

    Yes, the twinax cables are all we ever use to connect servers to Nexus 5ks. We have used them with both Qlogic and Emulex CNAs. If the server is more than 10m from the switch the 10G-SR and 50 micron fiber are required.

Maybe you are looking for