Connect a camera to media player

I have a NI 1764 camera. Is there any way to connect to media player from web builder? Like an webcam.
Thx
Solved!
Go to Solution.

Hi Adi_,
At this point, the Media control and the Image control can only display videos and images that are hosted on a web server. So streaming video is not possible at this point. You may be able to simulate streaming by using a camera to capture images and save those images to a directory that is hosted by a web server. Then from your Web UI Builder application you could programmatically load the images in order at a desired rate (assuming the naming scheme of the image files are known). Depending on your application, this may or may not suffice.
I apologize for the inconvenience, but your feedback is much appreciated.
Aaron P
National Instruments
Applications Engineer
http://www.ni.com/support

Similar Messages

How to connect MBAir to home media player?

Hi,
I have a Western Digital home media player linked to my router, I’m trying to connect it to my MBAir via wifi so I can stream movies.
http://www.wdc.com/en/products/products.aspx?id=330
However, I can’t find out how to set up the connection on the MBAir. Can somebody please give me some instructions? This is the 1st time I’m tring to do this on OS X.
Thanks

Here are the steps i did to enable file shearing after reading posts from WD forum:
Went into System Preferences | Sharing and ticked the 'File Sharing' box, from there clicked 'Options', and subsequently ticked 'Share files and folders using SMB (Windows).
The external hard drive connected to the media player should appear in Finder side bar.
How to setup the media player for network can be found in the user manual here:
http://www.wdc.com/en/products/products.aspx?id=330

IOS 8.1.3 can't connect Blue and Me media player on Alfa Romeo Mito

Hi all,
I am using a iPhone 5s 64GB, It was fatalistic using it on my Alfa Romeo Mito, I can play music from my music library or online, like Spotify.
Since I upgrade to iOS 8.1.3 it just stopped working, and I tried my friend's iPhone 5 with iOS 8.1.2 it works fine.
Hope some one can help.
Thanks!

Hello JackinCanaryWharf,
If can see the frustration with not having the connection with your iPhone, especially if another phone can pair and yours does not. I would start with using the article below to start troubleshooting the issue further. You may need to forget the connection and reset it up.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/en-us/TS4562
Regards,
-Norm G.

Windows Media Player 11 Bluetooth connect with N73

Anyone can help me with connecting N73 to Windows Media Player via bluetooth?
I have Nokia PC Suite updated and Bluetooth connects with it.
I can see it on "My Computer" folder as a phone and also as a camera.
In Device Manager, i can also see it as a "Portable Media Device"
But Windows Media Player doesn't seem to detect it when it is connected to PC via bluetooth. Only when connected by cable. But as I want to get rid of the cable, how should I manage this?
Thank you very much.

As you are using Windows 7, you can use this extension from Microsoft - http://www.interoperabilitybridges.com/html5-extension-for-wmp-plugin

N900 Media Player and Camera not working

Hello,
I am having some problems with my phone which I think might be related to gstreamer.
When I open the camera cover and the camera tries to launch I get the error message "Operation failed". Media player also does not work, I can see the media files but when I try playing them nothing happens.
I used gstreamer to capture images for an application that I created and it has always worked fine until recently, when I started noticing the problems with the camera and media player.
Between the time everything was working and now, this is what I have done:
-installed OpenGL ES 2
-installed Qt
-copied a bunch of screenshots from the phone to my Mac (i think I just did it through bluetooth but I might have used the usb cable)
Here is what I have done to try to fix the problem:
-connect the phone via usb to a windows computer, rightclick the n900 icon and error check (as recommended on this forum)
-update the firmware using app manager
-reboot
-type dmesg in the terminal after opening the lens cover - that did not output any errors
Could this be related to anything other than the gstreamer? If it is the gstreamer, should I try reinstalling it?
Any help would be appreciated
Best,
Eyrun

Thanks. The reason why I haven't done that yet is that the gstreamer libraries came with the phone as I got it and I am not sure what needs to be installed. It seems like there are many plugins and something called totem-gstreamer that I might need additionally. Do you know of any good references for how this should be done for N900? I haven't been able to find one. Also, I do think it is a little bit strange that all of a sudden gstreamer would stop working, that's why I wonder if it could be something else?
Best,
Eyrun

N95, Vista drivers and media player mode

HI, Sorry to double post but I'm new to this forum and not sure where this should go. I got a new N95, I installed the older version of PC suite that came on the disc with the phone. I then updated to the latest version. .83 . It works fine with PC suite I can sync things transfer files etc, however I cant use it in data transfer or media player mode (it keeps searching for drivers it cant find). These are the only modes I am interested in. This is on a fairly new laptop with Vista ultimate installed. However I tried it on another computer in my house with Vista Home Premium installed, however this time I didn't install any extra software and it detected the phone in both data transfer and media player mode without any problems.
So I'm guessing that it installed something to mess it up when I installed the original version of PC Suite. PC Suite cleaner says it isn't vista compatible but I ran it in XP compatibility mode and it appeared to do something, but I have un-installed all versions of PC Suite and it still has the same problem, I cant use system restore as it kept setting restore points whenever it installed a part of PC suite and I ran out of system restore points. So please tell me how can I get it back to normal. It looks like I'm not the only one here with a similar problem, someone must know something, Id be really grateful for any suggestions.
Thanks in advance.

09-Apr-200703:09 AM
azmi wrote:
yes, I do have same problem but I'm using N80 and winxp home, media player version 11, can anyone help us thankx
I can help I think. I just spent all afternoon yesterday with this problem and my conclusion is that in spite of what Nokia says somewhere in the installation documentation about the Media Player driver for WMP 10 working with WMP 10 "or above", it does not work with WMP 11, and if you want this functionality you will have to roll back to WMP 10 from WMP 11.
I think this may not be an option for Vista users, but for WinXP SP2 and an N80ie such as I have, here is what happened to me.
I had WMP 11 and I downloaded the driver for WMP 10 from here.
http://europe.nokia.com/A4237039
I then connected the N80ie to the PC using the C series cable that came with the phone, and when the Found New Hardware Wizard started I browsed to the location of the driver file and it announced that it had installed it, and I had to reboot. Whenever I would reboot, or even without rebooting, the Found New Hardware Wizard kept opening again, and again, and again and would seemingly have never stopped opening.
Now in retrospect I see that I wasn't installing it according to the directions, which say to right click on the WMP 10 driver file and choose "Install", but I don't think that would work any better if I had.
In the end, I rolled back to the Version of WMP that was on the machine when I installed WinXP (which was WMP 9) and then upgraded it to WMP 10.
Then following the directions for installation this time, I right clicked on the WMP 10 driver file, installed it, and it works fine.
If you open WMP 10 and choose Sync, and if the N80ie is connected via cable and Media Player mode, you will be able to choose it at the top of the right hand pane of the Sync display in WMP 10 and see the files on yor N80 plus (if the directions are correct and I understand them correctly... I haven't tried it) copy files in one direction from WMP 10 to your N80.
One thing I did differently than the rollback instructions call for... if you check here:
http://www.microsoft.com/windows/windowsmedia/player/11/readme.aspx
Step 15 under "Rolling back to a previous version of the Player" says "Click Microsoft User-Mode Driver Framework Feature Pack 1.0.0" and then click "Remove".
I found that I had "Microsoft User-Mode Driver Framework Feature Pack 1.5" installed instead of 1.0.0 and when I clicked "Remove" I got dialog box that said if I removed it a whole list of programs might not work anymore, including but not only Nokia PC Suite, and Nokia Software Updater. So I elected NOT to remove "Microsoft User-Mode Driver Framework Feature Pack 1.5", and everything seems to work OK in spite of my not doing that.
Hope this helps.
I think that Nokia needs to come out with an updated driver for WMP 11 or Vista users are out of luck if they can't roll back to WMP 10, and us XP users will have to stay on WMP 10 until that happens if we want this feature to work on our N80's.
Best Regards,
Dave

Cannot disable e65 and windows media player sync

Hi
I have a Nokia E65 and i am using Nokia PC suite to sync it.
every time the phone connects i get a message from the windows media player that the phone memory is nearly full...
Any idea how I can disable the sync between media player and the mobile? i have tried doing it through the media player, but everytime i remove the phone from the devices list in media player, it comes back again.
thanks

Windows Media Player is set to automatically sync with any new player it detects. To switch it off, connect the phone (in Media Player mode); when it starts syncing cancel the sync; then go to:
'Sync' tab -> Down arrow (righ click) for more options menu -> Nokia E65 (or whatever the name of your phone) -> Advanced Options
Uncheck the 'Start sync when device connects' and you're good to go. This option can also be found under:
Options -> Devices -> select Nokia E65 (or whatever the name) -> Properties button
Hope this helps!
Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
If I've helped, use the Kudos button to thank

How do I connect an IPod Touch (4th Generation) to media player to sync a music playlist?

How do I connect an IPod Touch (4th Generation) to Windows media player to sync a music playlist? It is not listed in the listing of compatible devices for Windows Media Player. And it does not recognize my IPod. It does recognize my IPod as a camera perhaps because it has pictures in it. Thank you!

No. You can only sync an iPod from media in your iTunes library.
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar and Control+B to show the Menu bar
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device> and follow the instructions.

I have tried to transfer files from my windows media player to my ipod but it saysthe device has stopped responding or stopped working.this is the first time ive connected nmy ipod to my new pc.any ideas?

I have tried to transfer music from my windows 7 media player to my ipod.This is the first time i have tried to use my ipod on my new computer .In the media player it doesnt give me the option to add to itunes library it just give me the option to send to my ipod and when i do this it says that the device has stopped responding or isnt working.Any ideas? coz i aint got the foggiest where i am going wrong.My ipod keeps telling me to update the software,but then will i lose the music thats already on my ipod?

You should import the music (that is listed in Windows Media Player) into your iTunes Library - on your computer - to add it to your existing iTunes Library. I take it you have moved (or copied) your music from the old computer to the new computer, haven't you?
Then Sync your iPod to that Library.
iPods will not respond to Windows Media Player, they're designed to connect to iTunes.

Windows Media Player no sound while playing a avi file in server and client connection using TCP/IP connection

Hello there
I have a problem with my windows media player while using server and client connection by using TCP/IP connection. So when I play a video using Windows Media Player in LabVIew there isn't any sound come out but when I'm playing a video by a Windows Media Player only the sound will come out. Can you help me solve this problem?
I also upload the vi as the reference.
The username for the client is ihsanhaikalz and the password is ganteng
Thanks
Attachments:
Client Remote.vi ‏746 KB
Server Remote.vi ‏1433 KB

Hi ican,
I was looking at your VI's but I cannot seem to pinpoint exactly where you are using Windows Media Player. In order to more quickly assist you, could you please recreate this issue more concisely in a smaller set of VIs. Also, were you able to get sound when you did not use the TCP/IP connection and simply played the files in LabVIEW?
I noticed in a few places that you were using the Play Sound File.VI from the Graphics and Sounds palette. Is that what you are refering to? I noticed there that the file path that you have designated for the song is simply the song title. Instead, this should be a path to where the song is located on your computer.
Also, if you are planning on using Windows Media Player, have you considered using the ActiveX commands for Windows Media Player? Here are a few examples if you are unfamiliar with this functionality.
Example 1 and Example 2.
I hope this helps!
Kim W.
Applications Engineer
National Instruments

Why does my HP laptop download all my music windows media player, HP connected music player, and itunes, when I only open it in itunes?

My HP lap top downloads all my music to the windows media player, my itunes, as well as HP connected. Is this taking up 3 times the space on my computer as it would if it only just used one? I only want music on my itunes, but it puts it in all 3.

when I go to the youtube, the WMP pauses the music by itself, and when I close the youtube, the WMP resumes the music byt itself!

How do i connect my ipod to windows media player and sync song to it, how do i connect my ipod to windows media player and sync song to it

how do i connect my ipod to windows media player and sync song to it,

You do not. The iPod will only sync to iTunes.

Camera movies to quicktime player or windows media player

Digital movies play just fine on my camera, a NIkon Coolpix but once I import them to either quicktime or windows media player they do not play smoothly. Any ideas why or what I can do to correct this?

I have a HP Pavilion 554y computer with windows xp operating system, not a mac
Why are you asking this on an Apple forum then ??!
Either ask Nikon or try the Microsoft forum:
http://support-for-microsoft.techvedic.co.uk/

¿What I have to do to avoid or prevent iTunes to auto configurate or autoselect as default media player each time I open it or connect my iPod?.

Hello,
For years I use in my computer Windows Media Player and/or Media Player Classic to play my music and video files and I know quite well all their operation options. My problem is that since I install the iTunes program, mainly for servicing my iPod Touch, every time I connect my iPod to the PC or open iTunes, the iTunes program without any warning or authorization auto configurate as default media player overriding my Windows and Classic Media players, so each time I have to open iTunes and go to the Advanced Preferences Menu and unselect the option " Use iTunes as the default audio application" so to be able to use my favorite media players.
My question is: ¿What I have to do to avoid or prevent iTunes to auto configurate or autoselect as default media player or override my favorite media players, each time I open it or connect my iPod?
Plese your help,
Regards,
Pabl

Hello BPeery,
I would go through ALL the steps here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Let us know how it goes.
Hope this helps.
~Julian

Lost Windows Media Player connection

After downloading eMusic's Download Manager, I lost my Windows Media Player connection.

Hi
Please find the weblinks given below might be helpful to resolve your issue.
Microsoft Fixit
How to Reinstall Windows Media Player in Windows 7 to Solve Problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Connect a camera to media player

Similar Messages

Maybe you are looking for