Connect a Client Computer Not Working At All

I have a new Windows 7 clean install with updates that is not able to connect to SBS 2011 at all.
In the past (about 2 years ago) I ran into the same problem and by following the simple steps outlined here - http://blog.ronnypot.nl/?p=594 - it worked no problem. Now it does not help at all.
For a test, I took a spare machine and did a clean install of SBS 2011, applied the updates (except NET 4.5.1). When I tried to connect the new Windows 7 machine to the new SBS 2011 machine - this also has failed.

Server's ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : BLAH-1
   Primary Dns Suffix . . . . . . . : BLAH.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : BLAH.local
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : BLAH.local
   Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller
   Physical Address. . . . . . . . . : REMOVED
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : REMOVED (Preferred)
   Link-local IPv6 Address . . . . . : REMOVED (Preferred)
   Link-local IPv6 Address . . . . . : REMOVED (Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.12(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : REMOVED
                                       192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : REMOVED
   DHCPv6 Client DUID. . . . . . . . : REMOVED
   DNS Servers . . . . . . . . . . . : REMOVED
                                       192.168.1.12
   NetBIOS over Tcpip. . . . . . . . : Enabled
   Connection-specific DNS Suffix Search List :
                                       BLAH.local
Tunnel adapter isatap.{REMOVED}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : BLAH.local
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Workstation's ipconifg /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : BLAH-1
   Primary Dns Suffix . . . . . . . : BLAH.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : BLAH.local
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : aspa2.local
   Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller
   Physical Address. . . . . . . . . : REMOVED
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : REMOVED (Preferred)
   Link-local IPv6 Address . . . . . : REMOVED (Preferred)
   Link-local IPv6 Address . . . . . : REMOVED (Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.12(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : REMOVED
                                       192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : REMOVED
   DHCPv6 Client DUID. . . . . . . . : REMOVED
   DNS Servers . . . . . . . . . . . : REMOVED
                                       192.168.1.12
   NetBIOS over Tcpip. . . . . . . . : Enabled
   Connection-specific DNS Suffix Search List :
                                       BLAH.local
Tunnel adapter isatap.{REMOVED}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : BLAH.local
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
HCI3 - I tried the steps you have listed and it did not work.

Similar Messages

HTTPS connection with client certificate not working in spartan

Spartan does not show certificate for the user to select
when I click the https link.
The certificates (taken from a smartcard) are indeed present in the user CertStore.
It works with IE 11 and Chrome.
Has somebody any suggestions ?
Thanks.

in fact you are more using a reverse-proxy than a proxy since it is on the server part..
You have to put all the SSL server part on the reserve-proxy itself and not on the final RSS feed. Then, the reverse-proxy will authenticate your client and gets its certificate. After that, either this proxy will open a plain connection (no ssl) towards the RSS, or you can also open a ssl connection but this means you must create a client certificate for the proxy. It just depends on the security level you need, and I used this solution many times in professional hosting.
hope it helps !

Wireless contection working but connection on main computer not working

I was using my main computer last night and walked away from it for about 15 minutes. When I came back it said there wasn't a connection to the internet and couldn't find one. I restarted the router and computer but it did not help. The connection does however work on my internet. Any suggestions?

mrsjolivas wrote:
Right now I can't download anything from the internet since my connection isn't working.
You said wireless is working, right? Use that, if it is on a different computer download it there, put it on a flash drive, install on the one that won't communicate. But first...
Lets go back to basics.
On the "main" (wired?) computer, can you communicate from the PC to the router? Open your browser, type in 192.168.1.1 in the address bar and hit enter.
Do you see the router login screen? If so, you are talking to the router, and the problem is inside the router or beyond it (which is unlikely since you said the wireless works).
No? Then you aren't even talking to the router, try a Network Connection repair on the PC and see if that fixes it. And check to make sure the ethernet cable between your computer and the router is still correctly plugged in, and try moving it to a different port on the router.
Hope this helps. If not, please tell us more about your entire configuration (PCs, other things like TV STBs, brand of router, any customization you may have done on the router, etc). It is hard for anyone to help in an information vacuum.
Justin
Verizon FiOS TV, Internet, and phone
QIP6416, IMG 1.6.2, Build 08.58
Keller, TX 76248

My iPod dispalys this message: "Connect to a computer. Use iTunes to restore." When I connect to a computer, iTunes doesn't recognise it. The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?

My iPod dispalys this message:
"Connect to a computer. Use iTunes to restore." When I connect to a computer, iTunes doesn't recognise it. The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
I have seen the Apple webpage suggesting the "five R's" (including restore). Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data.
I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data.
Thanks in advance!

Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

TS3694 I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

TS1424 I was buying songs on my itune account, and now my itunes icon on my computer will not work at all, I do not know how to sign back into

I was buying songs on my Itunes account and I signed-out and now my Itunes icon on my desktop will not work at all. How do you access your account

http://support.apple.com/kb/TS1538
Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable.

TS3048 my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!

my wireless mouse is not working at all. I have changed the batteries and still nothing, not even a flashing green light. I am using someone else's computer to ask these questions as I now can't use mine. Help!!!

I just had the same problem. And I found the solution, on Youtube.
The problem is that these ******** at apple designed the battery compartement, the distance between metal contacts too big.
That means the batteries plus or minus poles are not touching the corresponding contacts in the mouses battery compartement.
Most likely the battery doesn't get pushed up to touch the plus contacts.
I used a fingernail to push the battery up and tadaa, the green LED came on.
The guy in the Youtube video just put some folded aluminium foil under the minus poles for bridging the gap.
See here, "How to fix the Apple Magic Mouse!":
https://www.youtube.com/watch?v=7vlDEVfV45s
Hope this helps.
<Edited by Host>

Mail settings on itouch are identical to those on my computer except for imap on itouch and pop3 on computer. Itouch mail will not work at all

The gmail settings on my itouch are identical to those on my macbook except I'm using imap on the itouch and pop3 on the macbook. The mail application simply will not work at all on the itouch. The fetching icon just spins around for a minute or two then stops. itouch vs 4.3.3 and macbook 10.6.7
Any help is greatly appreciated.
Mitchell

Any error messages ?

I updated software upgrade from itunes. now phone will not work at all. only have picture of apple icon and usb on screen

i downloaded an upgrade from itunes last night to os5.1 i think. it said there was a problem with the download. now my phone will not work at all. it just has a picture of the itunes logo ans a picture of a usb cable on it. my computer will not recognise phone either

http://support.apple.com/kb/TS1538
Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable.

Issue with re-connecting a Client Computer to the Server Essentials R2 2012

I have an issue re-connecting a Client Computer to Server Essentials R2 2012. The Client Computer in question was connected to the Sever originally. I started getting Error Messages indicating that I was running out of storage room. I
had been wanting to re-configure this Server with additional Hard Drives for some time, but something else always came up first. Now, I was forced to address the problem. I shut down the Server and added additional Hard Drives and while I was at
it I replaced the original Hard Drive that the Server Operating System was on with a much smaller Hard Drive, and reinstalled Server Essentials on that Drive. Everything was working fine and the Server Back-up went fine to an external Hard Drive.
I was ready to re-install my Client Computers. I started with my primary Production Computer first. The Connector Software seemed to install fine, but as I moved through the Connection Wizard I received the following Error Message: "Cannot
connect this computer to the network. This computer is already connected to another Windows Server Network. Before connecting this computer to the Windows Server Essentials network, you must remove this computer from the current network.
To resolve this issue, contact the person responsible for your network". I am the Administrator. I removed the Connector Software following the instructions in the "Troubleshooting connecting computers to the Server", but I continue
to get the Error Message whenever I attempt to re-connect the Client Computer. I have not attempted to connect any of the other three Client Computers yet as I need to resolve this issue first on my primary production machine. Where am I going
wrong? Does anyone have any suggestions?

Hi PARADOX-RED,
Based on the error messages that you provided, please remove the connector software from Control Panel completely. Then, in the problematic computer, please locate
to: Control Panel-> System-> select Change settings. And select the Computer Name tab in the System Properties dialog box, click
change button. Then in the Computer Name/Domain Changes dialog box, please take the computer out of the domain as a workgroup, and rejoin in new domain.
Please check if this issue can be solved. If it still exists, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

1415 fnw printer wireless connection extremely slow or not working with OS X, works with windows

The wireless connection to the printer is either extremely slow or not working at all on OS X Yosemite. It shows up in the list of printers in Bonjour in Safari, and I can connect to parts of the web interface if I wait a very long time. However, I cannot add the printer as a new printer in System Preferences even though the printer shows up.
I have upgraded to the latest firmware. The WiFi indicator on the printer is on, "green", and it has a reserved IP showing up in my router (ComCast). It seems that Windows machines can printer to the printer wirelessly without a problem.
Any help appreciated.
Stephen
This question was solved.
View Solution.

Hello @sscotti,
I would like to assist you today with installing your wireless HP LaserJet Pro CM1415fnw Color Multifunction Printer on your Mac OS X 10.10 Computer. Now you indicate in your post that this printer works fine with Windows computers, and you are able to 'see' the Bonjour printer on your Mac. Therefore, the issue that you are experiencing is not network related. Rather, I do believe that you are experiencing a driver conflict on your Mac OS X 10.10 computer. Can I please have you run the steps below to resolve this issue.
Step 1: Uninstall Drivers and Software:
First, I'm going to have you 'clean up' your Mac OS X 10.10 computer to verify that any trace of your Laserjet printer is gone so we have a nice clean slate to work with. Please click here and when the website opens select the drop down for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for Mac OS X 10.10. Run the appropriate uninstall steps for the method in which you originally tried to install your printer: Apple Updates, or the HP Driver download.
Once the uninstall is complete, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
Please click here to download the appropriate Mac OS X 10.10 drivers for your HP Laserjet printer.
Once the website opens select the 'download' button on the top left
Once the download has completed, please follow the onscreen steps to reinstall your printer.
Once the reinstall is complete, test the print and scan functions to ensure that your printer is functioning as per normal.
Please respond to this post with the result of your troubleshooting. Should you still be experiencing issues there are additional steps I can have you run through. I look forward to hearing from you. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

S60 v3 fp2 destinations not working in all applica...

hi all
I have an n79 and i have noticed that the new access point prioritization using the destinations feature in s60 v3fp2 does not work in all the device applications. e.g. the share online app does not see the internet destination but my access points (3G, WLAn...) so I need to manually select the access point. Is this an n79 bug?
rrgards

I too am frustrated by this.
It works great with new apps (such as the internal Web Browser).
*some* other apps seem to show a "default" access point, which actually uses the "destination" group you "mark as default" in the connectivity menu
both these are great.
Then there's other apps which only show individual APs and no "default".
I struggle to see why the implementation couldn't have made a virtual AP available via the "old" interface (for old apps). There are already 3rd party apps that do this, including many VPN clients as well as "psiloc connect" (see http://connect.psiloc.com/ ) -- but sadly that isn't available on FP2.
There's so much about the N96 that's "nearly there" but so frequently is let down by a lack of consideration of the end user experience. Examples include
- battery life (could have been 30-40% more for the sake of ~1mm)
- Access points (as above)
- removal of wifi client
- sluggishness of response

ITunes sharing not working at all

I have been trying to set up a LAN so that I can play music from the computer upstairs via my laptop downstairs. At the moment the 2 machines are connected directly with an ethernet cable, so it's not a router problem (every thread I find on this topic blames this on routers).
My laptop is a MacBook running OSX 10.4.11, using the latest version of iTunes (8-something), and the computer is a PPC G3 running OSX 10.4.11, also on the latest version of iTunes (it updated this morning). The laptop can see the library on the computer, but not load it (error 3259) and keeps telling me to check firewall / ports. The firewalls on BOTH computers have been disabled, and the ports have been checked & are correct (3689). The G3 does not even show the iTunes library from the laptop in iTunes though!
I have tried scrapping the iTunes preferences files on both machines & restarting iTunes. They both seem to be able to find each other / open files through the 'network' feature in finder (although I had problems with that earlier), but iTunes sharing is not working at all.
What can I do? Some threads suggest problems with Bonjour or QuickTime, but I don't know if these are relevant at all. As others have commented: lots of threads on the net about this but no answers!

turns out you need to be sure the computers are connected before starting iTunes on either one for this to work.
I just got this working - through the router as well - with no problems at all following this method.
It doesn't mention this at all in apple's instructions.

8700c and device manager not working AT ALL

So I just recently got a Blackberry 8700c and for some reason the device manager does not work at all. Like my computer will make a dadunk noise when I connect my Blackberry via USB cable but it won't register that my blackberry is connected. I cant go to my computer and actually click on my blackberry.
I have windows vista and the device manager software I am using is the one I got in the box. 4.1
I am also using AT&T please help.
All I want to do is be able to connect it to my computer and upload themes and whatever else I want to the phone. But it isn't working
Solved!
Go to Solution.

Do you have Desktop Manager loaded to your PC? You mentioned device manager, but I would recommed Desktop Manager ver 4.7
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

Cconnect it to your computer with the latest version of iTunes installed.

Connect a Client Computer Not Working At All

Similar Messages

Maybe you are looking for