Connect a logitech wireless gamepad f710 to ipad help?

i have heard it was perhaps possible to connect my wireless logitech f710 gamepad to my iPad for gaming and etc... so is it possible can it be done?
would love to know if it can be.
cheers,
MP.

It's not possible. The gamepad required drivers that cannot be installed on your iPad.

Similar Messages

  • I can not connect my apple wireless keyboard to my iPad Mini?

    I can not connect my apple wireless keyboard to my iPad Mini?

    I can see it in the Bluetooth menu but it will not connect? The keyboard has new battery's but the light on the keyboard does not stay lite?

  • I've connected to the wireless network, but my Ipad still insists I have no internet connection, what can I do?

    I've connected to the wireless network, but my Ipad still insists I have no internet connection?
    What can I try?

    If the iPad insists that you have no Internet connection, why do you say that you've connected to the wireless network?

  • Trying to connect a LOGITECH WIRELESS BOOMBOX to a macbook

    hey guys - i'm wondering if anyone could give me some advice on how to fix this.  i recently bought a logitech WIRELESS boombox and cannot connect it to either my macbook (running 10.5.8).  my mac recognizes the boombox but when i try to connect it i'm prompted to enter a passkey.  obviously there is no way for me to enter the passkey into the speaker so it doesn't connect. i've been able to get this to sync very easily with both my husband and i's droid phones and his MBP so i'm kinda bummed.
    i'm wondering if this is something i can fix or if i'm just not able to use this speaker with my macbook.

    I've been trying for the last half hour to pair a PS3 Sixaxis controller (cechzc1u) to my iMac, without much luck, it shows up in my bluetooth menu bar and says connected; but it does not show up in my bluetooth system preferences.
    I'm curious if this requires the DualShock3 (cechzc2u) to work instead; i haven't had any luck with answers on the rest of the interweb.
    any ideas?

  • How can I connected my Samsung wireless printer to print IPad document ?

    How to print mail... To wireless Samsung printer from iPad.

    I don't think the Samsung support AirPrint.
    http://support.apple.com/kb/ht4356

  • Why can't I connect to my wireless speaker with my iPad 2

    I have a Sony wireless speaker that connects with my iPhone but won't connect with my iPad 2. Any ideas?

    - Reset the iPOd. Nothing will be lost
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • I have an iPad with iOS 5.0.1 that is not able to connect to cisco wireless networks at work.

    Hi, I have an iPad that is not able to connect to any of the Cisco wireless access points at work. The iPad is on the latest iOS 5.0.1. I did a reset on the iPad and erased all content and settings. The wireless network I'm trying to connect uses WPA2 Enterprise encryption. I'm able to connect to a Verizon mifi device so I know wireless is working. It seems like it's just not getting the certificate. I'm able to connect to our wireless network from other iPads just fine except for this one device. Please let me know if there is anything else I can do to troubleshoot the issue. Thank you.
    Julio

    I suggest updating using iTunes on your computer (current version: 11.0.3).
    Update iOS first, then apps.

  • Unable to connect laptop to wireless network

    My MacBook Pro will not connect to my wireless network, but my iPad does so I know it must be a problem with my computer rather than the network. Any suggestions?
    I'm not sure if there is some obscure setting that I need to change.

    Give us more information, please.
    Is your wireless network supplied by your ISP, your landlord, your own router, or something else?
    What can you tell us about the settings on your wireless network? (Not the passwords.)
    Did this ever work, or is this the first time you have tried to connect the MBP to this wireless network?
    What model/year MBP is this? It has to be somewhat old if it is running Snow Leopard (10.6.8) as per your profile.

  • HT4111 I have an IPAD updated with iSO 7. Recently I purchased a logitech wireless keyboard and I went to pair the two up and the IPAD shows that the keyboard is paired or connected but when I type using the keyboard it does not transfer to the pad scene.

    I have an IPAD updated with iSo 7. Recently I purchased a logitech wireless keyboard.
    I went to pair the two up and the IPAD recognizes the keyboard and cites that it is connected.
    But I proceed to type the words do not transfer to the screen.
    Any suggestions? Techs at Best Buy state that the iSO 7 is not yet compatible with the keyboard manufacturers?
    How long before they are?

    The BestBuy guys are clueless.  I use a Logitech BT Tablet keyboard with my iPad 4 - used it before with iOS 6 and use it now with iOS 7 and it works just fine.
    A simply thing to try is to remove the BT pairing, reset your iPad (hold the on/off/sleep button and the home button at the same time until the Apple boot logo appears), then try repairing them.  You may have to force the keyboard back into pairing mode (on mine, there is a button on the underside, near the on/off switch, that I would press and hold for second or two to force pairing mode).

  • How do I connect a wireless printer with my ipad 5.1?

    How do I connect a wireless printer to my iPad?

    If its listed as 'airprint enabled', then you can follow the steps in this article:
    http://support.apple.com/kb/HT4356

  • HT4356 How do I connected HP Photosmart C6380 all-in-one wireless printer to my iPad

    When I put in the key it says that it cannot connect But my iPad is connected to my wireless Internet as well as my computer and my phone

    Check out this article. Your printer has to be on the list as air print compatible first.

  • My ipad nor my iphone will connect to the wireless router, and i have no internet connection

    In my previous place I had all my Mac Book, iphone and iPad connected through the wireless router. Now in my new place my macbook is connecting occasionally, and my iphone and ipad are not connecting at all, although in "settings" it looks that they are, but when I open the browser it says "safari cannot open page because it is not connected to the internet" What is wrong?

    nandasaboia wrote:
    The networks show up, but since I haven't been able to connect, I don't get the "forget this network" option.
    Yes, other users are iphone users.
    Where the network shows up settings >>>wifi >>>Office network >>>click the small i in a blue circle click and you will find option to forget network

  • I cannot get my IPad air to connect to wireless in home. Two other iPad 2's connect as well as laptops. I have already exchanged one iPad air and none want to connect. Husband has taken iPad air to the apple store, connects here but not here. Who can help

    Can someone please help???  I received am IPad air in November for my birthday and have not been able to use yet,  I could not get it to connect so I returned it for another iPad air. And cannot get it to connect to wireless either. I have three other iPad 2's and laptops in home and everything connects with no problem. What is the deal with these iPad airs? My husband took the iPad to Apple store, it works there but didn't change anything so it won't work at home. Do I need to step down to old IPad since that's all that will connect in home.  This is crazy,!!! How can I get my IPad air working in my home.???

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT1414 I upgraded to iOS 5 and my iPad cannot be recognized by my pc, my apple laptop or any other system.  It doesn't even sync while connected to my wireless network.  also, the iPad can only charge if I turn it off and plug it to either the wall outlet

    After I upgraded to iOS 5 my pc and laptops (including the apple one) do not recognize the laptop when I connect to the USB.  The wireless function does not function either.  I cannot sync the iPad 2 anymore because of this.  Also, the only way it charges is if I lug it to the wall or pc USB and turn it off.  I was able to charge the device while it was on.  Why is this happening?  How can I fix it? If there is no fix, how can I revert back to an older iOS.  I tried using the support apple instructions but the iPad is not recognized by the pc and I cannot sync the iPad iTunes to revert back to an older iOS.  Any help will be greatly appreciated.

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I cannot connect my Logitech keyboard to my IPad.  It worked well and now the Bluetooth device cannot 'find' the connection.  I have fully charged all batteries etc.  I may have said 'forget this device' how do I get it back again!! Help!

    I Cannot connect my Logitech keyboard to my IPad.  It has been working fine.  It may be that I highlighted 'forget this device' when using the IPad without the keyboard.  The Bluetooth cannot 'discover' the device.  All batteries fully charged.  Bluetooth lights up etc.  any ideas?

    Hey Montreal67,
    Thanks for the question. I understand that you are experiencing issues with a third-party bluetooth accessory. The following resource may provide a solution:
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Thanks,
    Matt M.

Maybe you are looking for

  • Crashes after trying to open file!?

    I'm trying to open files in Elements 11. Finder quickly flashes up then disappears. After that, all the menu options are greyed out (including "QUIT"). I then need to Force Quit. Can't get any further! Help please!

  • Equium A300D - Parralled/Dual Boot OS's

    Hello. Yesterday I bought a A300D laptop and after setting it up I've found its rather slow. For example it will come up with "please wait" before showing you the log-in screen upon boot up. It takes around 2-4minuets at least just to let you log on.

  • Patch  Oracle BI Publisher 11.1.1.7.0

    Hello,   I install Oracle BI Publisher 11.1.1.7.0 (build# 20130303.1415 on Sun Mar 03 14:22:08 CET 2013). I need to patch Oracle BI Publisher , but I don't know wich patch set to download and install. I get  lost  when I consult a list Patch in  OBIE

  • Lightroom 5.7 will not convert .nef to dng from my Nikon d750. Stand alone dng converter will not recognize or convert the files.

    Lightroom 5.7 will not convert .nef to dng from my Nikon d750. Stand alone dng converter will not recognize or convert the files. Any know whats wrong?

  • Full installtion error

    hi friends    i have an  error in the full installation screen..i  am trying  to make the rate type under register..but still the  rate type under device is also  being  asked... i have assigned my  rate type as register based in spro but y the full