Connect a PC more then one internet connections

Hi all members of JAVA forums.
I am a computer science student.I have two queries of network problem the first one is. If i have more then one internet connection i want to connect all connection of internet with a single computer to increase the internet speed.And the second question is.When i start downloading in the initial position of downloading i can see the speed of downloading is very good but after few seconds the speed will be slow i want to make the initial position constant for gain high speed downloading is it possible.Please help me.tell me something about network hacking.

Ankitbill wrote:
If i have more then one internet connection i want to connect all connection of internet with a single computer to increase the internet speed.Rather than attempting to combine several smaller pipes just get one larger pipe.
When i start downloading in the initial position of downloading i can see the speed of downloading is very good but after few seconds the speed will be slow i want to make the initial position constant for gain high speed downloading is it possible.Does your browser use prefetching?
tell me something about network hacking.[http://en.wikipedia.org/wiki/Hacker_%28programmer_subculture%29#Definition]
or
[http://en.wikipedia.org/wiki/Black_hat#Black_Hat_Hacker]?

Similar Messages

  • Can you connect more then one external screen to a mac with one mini display point?

    Does any one know if you can connect more then one external screen to a mac, with one mini display point?

    This company has a dual monitor solution for DisplayPort;
    http://www.matrox.com/graphics/en/products/gxm/dh2go/

  • Can I connect more then one cDAQ-9188 in the same network?

    Hi, I have one question for you.
    Can I connect more then one cDAQ-9188 to moxa EDS-G205-T for querying simultaneously in the same PC?
    thanks in advance for any response.

    You will need a network switch and make sure they are different IP Addresses, but same subnet.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Can I have more then one MVIEW site connected to single master site?

    Hi,
    I need one help from your end.
    Currently I am working on Basic Replication.For that I am using Read only Materialized views.first i tried with one master site & one Materialized view site its working fine,Can I have more then one MVIEW site connected to single master site referring to same database ? if so how to achive this one..

    Actually one of my senior told me that you need to change number of OPEN_LINKS value like that so for that reason I asked this question.
    Still that problem not solved..
    I will explain what are all the things I did ok.
    IN MASTER SITE:
    I am creating read only MVIEW's.
    first i created one user repadmin and have given
    1>execute any procedure
    2>dbms_repcat_admin.grant_admin_any_repgroup
    3>dbms_repcat_admin.grant_admin_any_schema
    4>select any dictionary
    and all other grants to repadmin user
    then I changed global_name = 'zxincmp' on Master site.
    Then I created mview log for each table (for 85 tables) & then I created mview's for that table on Master site itself. later I took a dump of these 85 mview's . then I transfered this dump to one of my mview site.
    IN MVIEW site:
    I created one user zxdbp_55 and all the above rights are given to this user & i created one public dblink
    "zxincmp" using "TO_CMP"(master site).Then I imported that dump which i took from master site.
    then i created one private link zxincmp in one of my mview site.then i used DBMS_REFRESH.MAKE('')
    to refresh all my tables & to set the interval..
    after that i created index on the mviews..
    this will works out fine for single master & single mvirew site.but I tried with the same procedure to prepare one more mview site,everything is fine but main problem is second mview site is not getting refreshed automatically,i need to do refresh manually from enterprise manager.. then it will get refreshed.
    how to overcome this problem? I am using same db name ,dblink,refresh group for both the mview site will it affects anywhere?
    Thanks & Regards,
    Hanumanth.

  • Connection of more then one device to a PC

    Hi,
    I have a product which need to work with 4 devices (no specific model - each time can be a different device[s]), at the moment we are using the PC Suite, and we found a limitation that only one device can be connected to each server.
    Is there is away to connect more then one device to a PC using the PC suite?
    Thanks,
    Idan

    As far as I know the short answer is no. The same applies with acyive sync and windows mobile. You can only sync one device at a time as far as I know.

  • OVI and syncing and having more then one phone

    I recently just upgraded my wife and my phones to Nokia 6350's, after backing up all my contacts and everything in Nokia's PC suite from the old phones and after activating the phones and restoring the back up to the new phones I saw there was an update suggestion to the PC suite which was OVI.
    I thought great maybe more function Etc..
    After downloading and finally figuring out how to put my phone number in in international format, I get it registered logging into my wife's phone first, from inside the app, I added my phone to it, but it didn't as me for the phone number or anything, but allowed me to change from one phone to the other, well when I hit the sync button for my phone it connected to my phone then added all my contacts to the existing contacts of my wife's, what I didn't relies at first it also put all my wife's contacts into my phone book on my phone, this is a major bug that shouldn't be allowed, Why would I want my wife's contacts in my phone???
    Well lucky for me since I had just backed up all my contacts separately,
    I closed out OVI and started PC Suite up, I wiped out my whole contacts and reloaded them from back up,
    What I can't figure out is why would they design their program like this that doesn't seen to allow you to manage multiple phones from the same program,
    Nokia's PC suite does this part great, as it keeps each phone totally separately.
    The other thing I don't care for is that OVI seems to depend on having an internet connection, which there are people out there that would like to manage their phones without having to have this, PC suite can be used without a internet connection.
    Does anyone have any idea on how to separately manage more then one phone in OVI?

    Set up a user account in Windows for your wife on the same computer and when syncing her phone set up and run Ovi Suite from that account.
    It is easy and once one gets used to it it gives great flexibility.
    This is not just a Nokia thing but quite a normal way of managing multiple devices for multiple users in Windows applications (e.g. we use an application that remote controls multiple telecommunications devices for multiple users and it manages them in that same way except it goes further and requires a separate account for each device as well as each user).

  • Fetching The more then One Company ID by using PLSQL Table on Block B1(FORM

    I have two blocks in Form (Forms 10g) .On the Block B2 I have populated the Company Id by using the PLSQL Table.Now I selected more than two company ID from that Block ...I just want to keep the Company ID in the Temp Field on the Block B1.which I have selected on the Block B2.Any idea how can I assign more then one Company ID to That Temp Field on B1.

    This doesn't appear to have any connection to JMS or indeed to Java. Wrong forum. Locking.

  • Print more then one pdf in window

    Hi, i use print preview for printing one pdf in crm, for one pdf everything works fine, but i need print more then one pdf in one popup window, any idea how to do it ?

    Hi, i describe process i have 4 adobe forms: - agreement 1 - agreement 2 - attachment A - attachment B user click on button print preview, popup windows is show, on this popup windows user have to choose one of  two adobe form (agreement 1 or agreement 2) after choosing adobe form, form that has been selected is printed in and display in new popup windows but sometimes, depending on the circumstances i have to print form that has been selected by user and attachment A (or/and) attachment B I wonder if there is the possibility to merge this 2 or 3 pdf in on pdf ?
    I use this code:
    * Create PDF Object.
       data: l_pdfobj type REF TO IF_FP_PDF_OBJECT.
       l_pdfobj = l_fp->create_pdf_object( connection = p_dest ).
    * Set document.
       l_pdfobj->set_document( pdfdata = fp_out ).
    * Execute, call ADS.
       l_pdfobj->execute( ).
    * Get result.
       l_pdfobj->get_document( importing pdfdata = fp_out ).
    maybe i can add pdf to the l_pdfobj.... but i don't know how,
    right now l_pdfobj get only one pdf.

  • Catalyst 520 more then one mac address

    How do I allow more then one device on all ports of the 520 Switch. When I hook another switch to any port on the switch it will only allow one Mac address/ or device to that connections. How would I disable that. Any step by step instructions would be great.

    Sounds like mac based port security is enabled. I've never worked on the Catalyst 520 but there must be a config section under security. However, be very careful connecting switches to other switches. An Ethernet loop can ruin your day.
     

  • Installing more then one HP All in One networked printer on one computer

    I want to be able to install more then one networked all-in-one printer on a single computer.
    This is need to be able to move from home office with one all-in-one to a client's location
    with another all-in-one but a different model.
    I have been told in the past that I can connect one via network connection and one via USB
    but this is not an acceptable solution because the printers are networked and used buy more then one system
    at a time.
    I don't think this is a unique situation for consultants or moble workers.
    Is there a way to do this with networked HP all-in-ones printers?

    What are the printer models and your operating system.  I am using both the Photosmart 2610 and Officejet 7410 networked here and have additional drivers installed for a K60 that is at another location I occasionally visit.  Typically you would install the most recent driver and install the printer, then run the installer again and specify "Add printer".
    Regards,
    Bob Headrick, Microsoft MVP Printing/Imaging
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!

    I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!!! ASAP

    Hi,
    Check the iChat Menu > Preferences > Video Section > Bandwidth setting.
    iChat needs to see a Minimum of 128kbps to do 1-1 chats in Video
    For 3 and 4 way chats it needs 384kbps
    Set the Bandwidth to 500kbps if it is set lower.
    Also check the speed you are getting from your Internet supplier.
    9:28 PM      Thursday; February 23, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How do I get the text to flow throughout more then one page.

    Hello,
    I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
    I could always send the file to someone to see if they can figure it out.
    Thank you,
    Natalie

    Thank you so much !
    but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
    Natalie
    Date: Wed, 12 May 2010 07:53:12 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do I get the text to flow throughout more then one page.
    Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
    https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
    Thanks
    Srini
    >

  • How can I restrict more then one user to access the table?

    Hi !
    I have a problem and two solutions and I am a bit confused as to
    which one is the best one and/or can there be any better way of
    handling the problem ?
    Problem : I have to update a key field of a table when I update
    it in the form 5.0 screen. I am basically doing a maintenance of
    a table and if a certain field is updated then the change has to
    be reflected in two more tables. But the issue is that the field
    is a part of the key in those two tables. So all I can think of
    is that I need to insert new set or rows for that new value of
    the field and delete the old set of records for old values of
    the field.
    There are two ways of doing it;
    1.One option can be to explicitely define two cursors separately
    and fetch the values in them one by one and then insert the new
    records and then delete the old records in both the tables. This
    I feel will be a cumbersome process both in terms of processing
    time and the coding.
    2.Second option I was thinking can be to create two flat tables
    (without keys) and insert the values in them and update the
    changed field there and then insert the rows in the respective
    tables. Delete the old records in the main tables and delets the
    records in these flat tables. This is a bit more faster and
    easier to predict and code. This seems to be a better option for
    me.
    Any comments on these ?
    In both the cases I was thinking of making some provision so
    that more then one person can't update the table simultaneously.
    Since if there are more then one persons doing the processing
    then some inconsistency might creep into the whole process.
    This is easier to do in the second process as if I check the
    data in the flat tables and if there is some data then I can
    presume that some one is doing the processing and I can ask the
    other person to hold for a while. But in this case how can I
    stop more then two people to simultaneously check for the empty
    table and start inserting the record ?
    I was just thinking of having a sepatare table having only one
    field and this will be a key field and as the process begins the
    process will insert a fix value say 'Y' in the key field and at
    the end of the process the record will be deleted and this way
    we can restrict the user to access the process more then one at
    a time..? Since you can't have same value of the key in a table
    more then once.
    Any better way of handling it will be deeply appreciated.
    How about locking the table at the begining and releasing the
    lock at the end ? Will there be any issue in that? since I am
    inserting and deleting the rows in the same transaction.
    Comments welcome,
    Shobhit
    null

    How about performing the update IN the database using a stored
    procedure?
    By using non-database fields on your form to get the
    information, you can then call the procedure in the database to
    perform the updates. If an error occurs in the procedure you
    rollback, if necessary, and send a message or status back to the
    form. If it succeeds you might wish to commit and then re-
    execute the form's query -- using either the original key values
    or the new key values...
    null

  • HOW DO I USE MORE THEN ONE ITUNES WITH MY IPHONE WITHOUT ERASING MY MUSIC?

    I have two different laptops with iTunes on it. I use both of them but my iPhone only works with one iTunes. I plug it into the computer and it says that my iPhone cannot use more then one iTunes. Is there a way I can use both or no?
    YES I AM CLICKING MANUELLY ADD SONGS TO MY iPhone.
    I just bought my iPhone about a week or so ago.
    Please help ASAP.

    I clone my library to a portable drive using SyncToy 2.1, a free tool from MS. I run this both at home & work so that I essentially have three identical copies of my library for backup redundacy, any of which I can use to update my iPods and my iPhone. I use iTunes Folder Watch occasionaly in case I've managed to download, for example, a podcast at one location but overwrite the library with a newer copy updated at the other. It can be done but you need to take considerable care...
    tt2

  • Can I use more then one apple ID on my computer/osx app store

    Hi,
    I use my MBP/iMac/ipad/iphone for both business and home.  Right now everything is setup to my home apple id (and I have made quite a few purchases with that).  With the release of the osx app store and FCPX,  my company wants to buy these for my computers.  But they want to do this on their apple id.  Can I run more then one id on a mac?  How can I make this work as I know they will want me to start getting more apps as they are released.

    You can have apps from multiple Apple IDs on one Mac. The issue will be that to update Mac apps bought with A ID #1 will require signing into A ID #1 in the MAS. And later when apps bought with A ID #2 need an update you will need to sign into A ID #2 in the MAS to update them. If you can keep that straight and can abide that requirement, there should be no issues.
    The same will be true to update iOS apps, but using iTunes.

Maybe you are looking for