Connect Adobe Drive to CQ 5.5 using SSL

I recently changed my CQ 5.5 server to use HTTPS (SSL) to connect to it so that it could be accessible from outside our network securely. The browser URL works fine using SSL and the new port, but now Adobe Drive won't connect. CQ Support told me to contact Adobe Drive Support, but I can't find that anywhere.

What is the behavior you're seeing with regard to Adobe Drive not connecting to your CQ 5.5 server? Are you using the latest version of Adobe Drive (related to Hema's question)? Recently released; Adobe Drive CC (compatible with CS6 and CC desktop applications). Is your CQ 5.5 server using a trusted certificate?
Overall, can you please send to me the case number that was provided to you when you contacted CQ support about this issue? I'll have an agent reach back out to you.

Similar Messages

Guide to connect Adobe drive with Alfresco CE

Hallo everybody!
Since adobe remove version cue, i search for a replacement. Can somebody please write a short guide how to configurate Alfresco CE to optimal work with adobe drive? Its drive me creasy, bljad! I think, i am not alone with this problem. Feel free to write here everethink, you found about it. Together we find a solution, i think.
The interest were (after connect Adobe drive to Alfresco CE):
- how configurate the space, where Alfresco CE saving the files ?
- how to set permissions to Alfresco CE drive to chek in the files from adobe programms?
- in bridge i cannot see the thumbnails of files (only the standart thumbs, maby it has something to do with the permission rights?)
- how can thomebody else from anywhere connect to Alfresco Cmis that is locally on my pc, like earler in versioncue, to callobarate)
Thanks to everybody for suggestions and help!
Adobe drive 2.1
Alfresco CE 3.4

Hi Borisbritva,
To work with Adobe Drive, you just need to install and launch Alfresco CE server. No special configuration.
Section 'Using the CMIS Connector' in CMIS CONNECTOR FOR ADOBE DRIVE 2.1: TECHNICAL NOTE doc shows the detailed steps on how to connect Alfresco server with Adobe Drive 2.1. Below is the link for the tech note:
http://help.adobe.com/en_US/creativesuite/cs/adobedrive/CMIS_Connector_Tech_Note.pdf
For "how configurate the space, where Alfresco CE saving the files ?" & "how to set permissions to Alfresco CE drive to chek in the files from adobe programms?", I think you need to read Alfresco Document ( http://www.alfresco.com/resources/documentation/ ). For simply try, use admin account to connect Alfresco Server with Adobe Drive. CMIS CONNECTOR FOR ADOBE DRIVE 2.1: TECHNICAL NOTE doc gives the detail info about how to browse, check in, and check out files.
For "in bridge i cannot see the thumbnails of files (only the standart thumbs, maby it has something to do with the permission rights?)", Adobe Drive 2.1 with CMIS connector doesn't support it. But Adobe Drive has exposed API to retrieve thumbnails of files. If you have interest, you can download Adobe Drive SDK ( http://www.adobe.com/devnet/adobedrive/eula_21.html ) and try it.
For "how can thomebody else from anywhere connect to Alfresco Cmis that is locally on my pc, like earler in versioncue, to callobarate)", Adobe Drive 2.1 with CMIS connector support it. Just replace 'localhost' with you external IP address in Server URL when connect to Alfresco server.
Thanks,
Hui

Problems with connecting to MacOS X Snow Leopard Server using SSL

I can successfully connect to my SL mail server if I do not enable SSL, but if I do enable SSL the iPhone mail client just fails to connect with a message "Cannot Get Mail - The connection to the server "servername" failed". I have set SSL to ON in Mail preferences, but I cannot see how to install the server's certificate. With most mail clients it seems like the server's certificate gets installed the first time you try and retrieve mail, but this does not happen with the iPhone.
The reason I am having to switch SSL on is that I have a number of PC mail clients, and it does not seem as if any of the various versions of Outlook support any form of authentication other than plain text (except NTLM or SPA, which are not supported by MacOS X Server, probably because they are MS proprietary). So I think I will probably have to fall back to a plain text login, but using SSL to secure the process.
Excuse me if I have misconstrued any aspect of this, but it is based on what I have been able to trawl up so far in an extremely under-documented area.
I have looked at the iPhone documentation but it is very sketchy in the area of SSL implementation. For example the iPhone User Guide just says "To adjust SSL and password settings, tap Advanced. Ask your network administrator or Internet service provider for the correct settings."

Thanks for the suggestion, but the question is really to do with how to get an SSL certificate onto an iPhone since the normal way of doing this with an email client doesn't happen.
I have posted a reply in a thread in the SL Server section regarding the best way to cope with Outlook clients, which is the question the other way around. Essentially what I need is one form of secure authentication which works for both iPhones and Outlook - and this doesn't seem to be possible on the basis of my experience so far.
So back to my question - how do you connect from an iPhone to a mail server which requires SSL?

Can Adobe Drive cs4 be used on a NAS

ALOHA,
I use Adobe Prod Prem CS4. I have also aquired a 4TB network storage device for use with my video media storage. I'm interested in knowing if I can set up Version Cue to be used on the NAS. I've had problems thus far trying to connect to the NAS by trying to connect to the NAS server manually. I can find the NAS on the network thru Bridge, but thought it might be faster if I can connect adobe drive to it instead.
Thanks for any help.
Dandla

Although I would not place assets, project files, render files, etc on a NAS due to the slow access, I originally had MY DOCUMENTS mapped to the NAS rather than the system disk as the NAS is a mirrored array. I found that Premiere sticks the preference files in MY DOCUMENTS. For some wierd reason, Premiere could find the MY DOCUMENTS on the NAS when writting the preference files out, but couldn't find those preference files on a read. I had to restore the MY DOCUMENTS mapping back to the system disk to keep Premiere from restoring the default workspace every time I started the program. As such, I agree that the post that states that Premiere doesn't like NAS drives.

AAMEE 3.1 deploying Adobe Drive 5

Hello
The documentation for Adobe Drive 5.0 says to use AAMEE 3.1 for deployment however when i try i get a valid installer could not be found.
I have the Adobe Drive 5.0 dmg mounted.
This worked fine for Adobe Drive 4
Any ideas?
Thanks

This doesn't work on OSX 10.7 10.8 and 10.9 for Adobe Drive 5 using aamee 3.1. I also get the message a valid installer could not be found. It worked fine on my Windows 7x64 machine.
Was your issue resolved markc0?
I just noticed that when i run the Adobe Drive 5 installer it wants to install adobe drive at the following location
/Library/Application Support/Adobe/Adobe Drive 4
So i looked at the AdobeDrive5-mul.install.xml contents
<Deployment>
<Properties>
    
    <Property name="INSTALLDIR">/Library/Application Support/Adobe/Adobe Drive 4</Property>
    <Property name="installLanguage">cs_CZ</Property>
    <!--The set of valid languages includes:
cs_CZ
da_DK
It installs just fine when running outside AAMEE and i don't think the install location matters but just wanted to point it out as this is the only discrepancy i could find.
Message was edited by: bosn9r

Does Adobe Drive 5 have a size limit?

Hey,
I have connected Adobe Drive to my instance of CQ5.5. I was running a file size test* and it seems that I can't upload or "Check in" a file bigger then aound 120mb.
I can't find any documentation on this limitation could someone please inlighting me? Is this a known issue?
*I copyied a 2gb file into the Adobe drive network drive and then checked it in, it started to transfer but when finished it only has uploaded about 120mb.
Thanks for any infomation you can provide.

I certainly haven't come across a limit.... and I have added 'YES' lyrics for 20 minute tracks and they are huge.

How can I get Adobe Bridge to show XMP metadata using Adobe Drive 4 CMIS Connector?

I have successfully connected to an Alfresco Enterprise Edition 4.1.0 repository, using the Adobe Drive 4, created a test folder and uploaded a jpeg file containing XMP metadata into it.
When I view the image's metadata (using Adobe Bridge), I observe that only part the standard file properties are displayed.
When I view a local copy of the image using the same, I see all fields of the standard file properties plus available metadata.
My question: what should I do in Adobe Bridge to be able to see all available XMP metadata?
Kind Regards and Appreciation
Don Greenwood
Pixelboxx GmbH
Dortmund

How did you get through to customer service? They've changed the website and I can't even find phone numbers or a chat button any more.
Here's my story that I posted on discussion yesterday, but no one has replied:
I am screaming and pulling my hair out right now! The last six months with Adobe has been a nightmare.
Once again I am completely locked out of Creative Cloud and cannot use the apps even though my automatic monthly deduction for payment was just made a couple of days ago. Creative Cloud continues to reset itself to the trial version which runs out in 30 days and after that I am locked out once again.
Now it looks like it is harder to access support than before. Where are chat and the phone numbers now? This was a nightmare with countless hours spent on chat and the phone over the last six months, and now I don't even know how to access support in order to spend even more time that does not solve the problem. What am I to do?
I cannot use the product I have paid for!
Please help!

Using Adobe Drive to upload images to alfresco

Hi all,
I am using Adobe Drive 2.1 with InDesign CS4 to connect to Alfresco.When I got connected to my alfresco with Adobe Drive a new drive (z:) is created and I can see the alfresco folders there.
Imagine that I have and InDesign document opened with a local image placed in it. We want (programmatically) the image to be copied to drive "z:" when we do the check in of the InDesign document (so other people can open the InDesign document with no image link lost (everybody will have a drive z: because everybody will have Adobe Drive)), but unfortunately the image is not uploaded to alfresco until we manually do a check in from the Adobe Drive contex menu in Windows explorer, so the rest of the people have a image link lost problem.
My quetion is, Is there any way to upload the image programmatically to alfresco from InDesign? if not, Is there any other way to do this? perhaps using the Adobe Drive SDK?
Thanks in advance,
Alvaro.

Currently, there is no direct method to upload images programmatically via Adobe Drive. Adobe Drive SDK is used to develop custom connector.
BTW, InDesgin has a function called package(Menu:File->Package). After you open a file with linked files and click menu File->Package, you specify a folder in Adobe Drive disk(Z:), then all related files will be saved to the specified folder and checked in automatically, no matter the original linked files are checked into the server or not. The disadvantage is that it may break your current folder structure. If the package function can meet your requirement, you can refer InDesign SDK from http://www.adobe.com/devnet/indesign/sdk.html to develop a plugin/extension to do this work.

Issue with Adobe Drive showing 2 drives when connecting to a HA environment

I am using Adobe Drive 5 and when connecting to a HA application it shows 2 drives. Even if I use the direct IP of one node 2 drives show up
Any idea how to stop a second drive shown up?

I have "SMB/CIFS" not "SMB/CIS" - does that make a difference? (I'm in uncharted waters here...)
When I go to Configure it, the default Workgroup is "Windows" in what looks like a drop down menu, but there is nothing else in the menu.
The WINS Server: is blank and I can't type anything in it.
I changed "Windows" (because I can type there) to the Workgroup of my school, and tried again with the same results.
The "Apply" and "Revert" buttons are grayed out. Only a few of the options are checked: AppleTalk, Bonjour (grayed), LDApv3, SLP, and SMB/CIFS
Authentication is set to Custom Path (/Netinfo/DefaultLocalNode)
Contacts set to "Automatic" (same path as above)
I'm trying to be a thorough as I can in my description, because I'm unfamiliar with this utility and want to make sure I'm not missing anything.
Thanks.

Can't connect to server by Adobe Drive

I can connect to the server by web portor but every time when I try to connect by using Adobe Drive, it will show this errors:
sometimes I got this one:
com.adobe.drive.connector.api.exception.PermissionDeniedException:Operation not allowed.
sometimes I got this one:
com.adobe.drive.connector.api.exception.RemoteIOException: Unable to complete request to remote server
Meanwhile, the log can't be accessed...
could someone help me please?
thank you very much!
Liang

I think the problem is that the exact protocol you enter in the Drive UI (e.g. https://yourserver/path) is never transferred to the ConnectHandler implemented by the connector you are using. Instead, the handler will get something like aem://yourserver/path and probably try connecting via http:// only. The only option I found was having a http:// endpoint, which redirects to the https:// port instead. Then, it seems to work.

When connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?"

when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please

Hi Michael
These are the answers
to your questions
What is the OS version, Windows Server 2008?
Microsoft Windows [Version 6.0.6001]
SP1
On which disk you choose to install it, the C: drive?
I have Raid 5
What
is the output of the Checkdsk?   It find Nothing
Could
you please upload us a screen shot? I have no
Screen shot
Is
the C: drive is a external drive? NO
Besides,
have you manually assigned the drive letter?
NO
Thanks

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.

Help using connect hard drive with Time Machine

My iMac and the two wirelessly connect apple laptops all recognize the Western Digital MYBookWorld 500gb external hard drive. We can all write to it and retrieve files. We are using a Lynksys router to which the iMac and WD drive are connected directly while the laptops connect wirelessly.
We are trying to use it with TIME Machine, but when we try to set up time machine, the drive does not show up as an option for the back up disc.
I have read through several old discussions about not recognizing the disc at all, but this is not our problem. Anyone with ideas?

Hello Taxi Driver and welcome to Apple Discussion!
In short to use the External HD for the current backup and TimeMachine you will need to repartition it creating a partition for each. The down side at this point, is that in order to repartition the external the current data on it will be erased. When setting up the External for TimeMachine set the Partition Map Scheme to GUID Partition Table and the Format to Mac OS Extended (Journaled)
A couple of options:
1. Backup the current files on the External HD to one of your Mac's, then repartition it with 2 partitions, then use the 1st for TimeMachine and copy back the files to the 2nd partition.
2. Safer and easier way is to pickup a second external and set it up for TimeMachine.
http://www.apple.com/support/leopard/timemachine/

Adobe Drive not connecting to hello world sample launched via Eclipse

I'm trying to get the hello world sample running with Drive SDK 5. I got:
Adobe Drive 5.0.1
AdobeDriveSDK-5.0.0.398770.zip
latest Java JRE 1.6
Eclipes 4.3.1 (Kepler SR 1)
Windows 7 64bit
I configured the hello world project as described in the getting started guide. I double checked that AD4ServiceManager.exe is not running. After starting the project in Eclipse and waiting about 15 seconds, all bundles are active:
osgi> ss
Framework is launched.
id     State       Bundle
0     ACTIVE      org.eclipse.osgi_3.5.0.v20090520
1     ACTIVE      com.adobe.csi.ncomm_2.0.0.28
2     ACTIVE      com.adobe.drive.core_2.0.0.28
3     ACTIVE      org.eclipse.equinox.cm_1.0.100.v20090520-1800
4     ACTIVE      org.eclipse.equinox.preferences_3.2.300.v20090520-1800
5     ACTIVE      org.eclipse.equinox.app_1.2.0.v20090520-1800
6     ACTIVE      com.adobe.drive.biz.filesystem_2.0.0.28
7     ACTIVE      javax.servlet_2.5.0.v200806031605
8     ACTIVE      org.eclipse.equinox.launcher_1.0.200.v20090520
9     ACTIVE      com.adobe.drive.manager.executor_1.0.0.28
10     ACTIVE      com.adobe.drive.connector.cmis_2.0.0.28
11     ACTIVE      com.adobe.drive.ui_2.0.0.28
                 Fragments=27
12     ACTIVE      org.hsqldb_2.2.9
13     ACTIVE      com.adobe.drive.model.synchronization_2.0.0.28
14     ACTIVE      com.adobe.drive.data.persistence.api_2.0.0.28
15     ACTIVE      org.eclipse.equinox.ds_1.1.0.v20090601
16     ACTIVE      org.eclipse.update.configurator_3.3.0.v20090312
17     ACTIVE      org.hibernate_3.2.5
18     ACTIVE      com.adobe.csi.core_2.0.0.28
19     ACTIVE      com.adobe.drive.connector.service_2.0.0.28
20     ACTIVE      com.adobe.drive.model_2.0.0.28
21     ACTIVE      com.adobe.drive.data.provider_2.0.0.28
22     ACTIVE      com.adobe.csi.auth.keystore_2.0.0.28
23     ACTIVE      com.adobe.drive.connector.api_2.0.0.28
24     ACTIVE      com.adobe.drive.data.persistence.hsqldb_2.0.0.28
25     ACTIVE      com.adobe.drive.data.cache_2.0.0.28
26     ACTIVE      org.apache.commons.codec_1.0.0.28
27     RESOLVED    com.adobe.drive.ui.scripting_2.0.0.28
                 Master=11
28     ACTIVE      org.apache.commons.net_1.4.1
29     ACTIVE      sample.helloworld_2.0.0
30     ACTIVE      com.adobe.csi.bootstrap_2.0.0.28
31     ACTIVE      com.adobe.drive.data.manager_2.0.0.28
32     ACTIVE      org.apache.commons.logging_1.0.4
33     ACTIVE      com.adobe.versioncue.nativecomm_4.0.1.28
34     ACTIVE      com.adobe.drive.biz.versioncue.api_2.0.0.28
35     ACTIVE      org.eclipse.equinox.common_3.5.0.v20090520-1800
36     ACTIVE      com.adobe.csi.pipes_2.0.0
37     ACTIVE      com.adobe.drive.data.model_2.0.0.28
38     ACTIVE      com.adobe.drive.data.persistence_2.0.0.28
39     ACTIVE      com.adobe.drive.processinfo_2.0.0.28
40     ACTIVE      com.adobe.drive.connector.cmis.client_2.0.0.28
41     ACTIVE      com.adobe.drive.ncomm.filesystem_2.0.0.28
42     ACTIVE      org.eclipse.equinox.registry_3.4.100.v20090520-1800
43     ACTIVE      org.apache.commons.httpclient_3.1.0
44     ACTIVE      com.adobe.drive.vcdetector_2.0.0
45     ACTIVE      com.adobe.drive.ncomm.versioncue_2.0.0.28
46     ACTIVE      com.adobe.drive.connector.cqdam_4.0.0.28
47     ACTIVE      com.adobe.csi.core.preferences_2.0.0.28
48     ACTIVE      org.eclipse.equinox.util_1.0.100.v20090520-1800
49     ACTIVE      com.adobe.csi.utils_2.0.0.28
50     ACTIVE      com.adobe.drive.biz.automount_2.0.0.28
51     ACTIVE      com.adobe.csi.core.logging_2.0.0.28
52     ACTIVE      com.adobe.drive.manager.interests_2.0.0.28
53     ACTIVE      org.apache.log4j_1.2.15
54     ACTIVE      com.adobe.drive.ifs_2.0.0.28
55     ACTIVE      com.adobe.drive.core.jobs_2.0.0.28
56     ACTIVE      org.eclipse.osgi.services_3.2.0.v20090520-1800
57     ACTIVE      com.adobe.drive.biz.versioncue_2.0.0.28
58     ACTIVE      com.adobe.csi.auth_2.0.0.28
Also, the output of csstat looks fine:
osgi> csstat
Registered connector factories (schema : reference):
cmis : {org.osgi.service.component.ComponentFactory}={component.factory=com.adobe.drive.connector.handlerfactory, component.name=com.adobe.drive.connector.cmis#cmis, service.id=48}
cq : {org.osgi.service.component.ComponentFactory}={component.factory=com.adobe.drive.connector.handlerfactory, component.name=cq#cq, service.id=75}
helloworld : {org.osgi.service.component.ComponentFactory}={component.factory=com.adobe.drive.connector.handlerfactory, component.name=sample.helloworld#helloworld, service.id=70}
Instantiated connector factories (uuid : factory):
Afterwards, I start Adobe Drive (32bit version). The UI hangs with the message "Adobe Drive is starting. Please wait.". From task manager I can see that not just Adobe Drive was started, but also AD4ServiceManager.exe. I guess, this should not happen, because Adobe Drive should discover the one launched via Eclipse.
So what's going wrong here? How does Adobe Drive discover the one launched via Eclipse? What could block discovery?
Here more details in case that helps debugging the problem. MANIFEST.MF:
Manifest-Version: 1.0
Bundle-ManifestVersion: 2
Bundle-Name: HelloWorld Plug-in
Bundle-SymbolicName: sample.helloworld
Bundle-Version: 2.0.0
Bundle-Vendor: Adobe Systems
Adobe-AutoStart: true
Require-Bundle: com.adobe.drive.connector.api,
com.adobe.drive.core,
com.adobe.drive.model,
com.adobe.csi.utils
Service-Component: OSGI-INF/HelloWorldHandlerFactory.xml
build.properties
source.. = src/
output.. = bin/
bin.includes = META-INF/,\
               OSGI-INF/
HelloWorldHandlerFactory.xml:
<?xml version="1.0"?>
     <component name="sample.helloworld#helloworld"
     factory="com.adobe.drive.connector.handlerfactory">
     <implementation class="sample.helloworld.HelloWorldHandlerFactory"/>
</component>
Here the Eclipse run configuration settings:

Wow, this seems to help even though it is still a bit shaky. Here the steps I have to do to get it working:
manually launch 64bit version of AD4ServiceManager.exe with parameter -launchedbydrive
launch Eclipse project and wait till ss shows everything as registered (much faster now)
start 64bit version of Drive -> my adapter doesn't show up
shutdown drive
start 64bit version of Drive again -> my adapter now shows up and works as expected
I find a few things confusing here:
In Eclipse, should I configure the 32bit or 64bit version of AD4ServiceManager as plugin execution environment? Currently, I'm using the 32bit version.
Why isn't the step of manually launching AD4ServiceManager.exe not mentioned in the getting started guide?
I will reboot my machine to see if it is still working or just some special sun radiation making it work currently :-)

How do you set up your server to use Adobe Drive (alfresco to Hyper-V)...

Hi,
We have been gradually using Adobe Illustrator CS6 in a team environment and, after having files on the server, found that we were stepping on one another i.e. losing work. The forum explained the pro's and con's of this arrangement; Adobe drive seemed to be the answer. However, there are constraints with this. The terms hyper-V and alfresco have come up, and getting the two to work is in question. Certainly there are companies out there who are using Illustrator in a team environment and I was wondering how you do it. Thanks so much.

Hello Julie.
Your junk filter appears to not be working properly. Try this first:
1. Go to Preferences > Junk Mail and disable junk mail filtering.
2. Quit Mail, then open it again.
3. Go to Preferences > Junk Mail, enable junk mail filtering, and configure it however you wish -- I recommend you to leave it at the default Automatic settings.
4. Reset the junk filter database (Preferences > Junk Mail > Reset).

Connect Adobe Drive to CQ 5.5 using SSL

Similar Messages

Maybe you are looking for