Connect and auto operate a third party s/w

i am developed a s/w,nd i want to put this s/w's output in a third party s/w's input textbox and submit a button automatically(like automatic testing tools).
i hav the .exe file only of that third party s/w...........so any one plz tell me how i trace that input textfield's win handler ID and submit button's win handler ID.
I think if  i get those ID it will be possible.....................
Please help me soon.
my email-id:[email protected]

I don't believe you can manipulate the display of another GUI application from java.
I suggest you use an automated testing tool.

Similar Messages

  • HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA APPLICATION

    HI expects,
            HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA or . DET APPLICATION.please provide me some scenarios and documents.please help me.

    Hi,
    In the sender side i.e. in SAP system you can use IDoc/RFC/Proxy to push the data to XI.
    IDoc supports only Async communication and in Sync case performace is good using Proxy.
    In the receiver side you can use Java Proxy to connect to the Java application or you can even bulid a webservice over the Java/.Net application and use SOAP adapter to post data to it.
    Thanks
    SaNv...

  • Operate a third party device

    HI
    I try to operate a third party Camera (C CAM) by LabVIEW. I try by call library function node. But I fail to get data by call library function node.
    Is there have any other way to operate third party device except call library function / CIN?
    Thanks
    Kamal

    Kamal;
    Other ways to access a third party device is via ActiveX, sending commands via the system exec VI, etc. However, my guess is that you need to try harder with the .dll
    Make sure you check the following articles: An Overview of Accessing DLLs or Shared Libraries from LabVIEW and External Code for LabVIEW - CIN / DLL - Starting Point
    The article "Can LabVIEW C? - Example 3: Using the Right Tools with LabVIEW" is an excellent starting point.
    I don't know about that camera, but if it is a webcam, you can do a search on toolkits to access a webcam from LabVIEW.
    Regards;
    Enrique
    www.vartortech.com

  • Home Monitoring and Control with a third party also monitoring and controllin​g?

    I was wondering if anyone has tried to install Home Monitoring and Control with a third party monitoring, and or controlling the same devices. I know many systems offer multiple control points such as auxilary control touch screens. Has anyone made this work? I have Z wave devices on my home security system (lighting), and would also like to monitor them via Verizon. Possibly also adding some energy monitoring and control, that is not available via my security company. My security monitoring company provide support through Alarm.com, but has limited energy monitoring to thermostat control and such.
    The only interactive control with my security company is for alarm monitoring and control, with limited lighting control. All of my devices are GE in the wall mounted lighting controls, and I would prefer to pay Verizon the few extra dollars for the additional features VIA the web, rather than pay Verizon. There used to be an energy package, that included the main power panel load and I thing Thermostat, but I believe some of the bundles have been split up.
    There are other options out there now, but I have neen exploring. My GE Switches are from the Lowes Iris system. Much less expensive, and can replace existing wall switches, not like the power cord switches. Plus the store is four miles from my house.

    I started with Verizon home monitoring, but if you read through the threads the service is extremely unreliable, still to this day. I am stillusing it, although I am waiting for a refund on the services that I have used since it is so bad but I bought a MiCasaVerde Vera3 system.  You pay appoximately $300 for the unit and there is no monthly charge and you get all the features plus pretty much unlimited types of z wave devices to use on it. I would seriously consider using that before Verizon.

  • Can i connect pci-7344 to my third party motor and drive without umi-7764 ?

    Our Lab have NI pci-7344 motion controller and third party motor and drive made by other company.
    We want to connect pci-7344 and third party motor & drive without umi-7764.
    Just use cable.
    Can we succeed to connect them ?

    In general it is possible to connect the PCI-7344 to a motor drive without using a UMI-7764 but you will loose some safety features and the level of noise immunity for encoder signals will be decreased.
    Please have a look at this link for more information.
    Best regards,
    Jochen Klier
    National Instruments Germany
    Message Edited by Jochen on 01-05-2007 10:19 AM

  • Connecting to Cloud Databases via Third Party

    Hello,
    Is it possible to connect to a Cloud Database via a third party database application....like Navicat?
    Thank you
    Brad

    Hi Brad -
    The only way to access data and logic in an Oracle Database Cloud Service is through an Application Express application running in the Service, a Java application running in the Java Cloud Service, or with RESTful Web Services. If any application can fit into one of these categories, they can use the Service.
    Hope this helps.
    - Rick Greenwald

  • Connecting the WAP to a Third Party Router

    Is it possible to connect the wireless access point for the set top boxes behind a third party router? 

    JustinY17 wrote:
    Is it possible to connect the wireless access point for the set top boxes behind a third party router? 
    Generally will say NO per ATT info.  One user posted he got it working, he knew what he was doing.  There are certain attributes that have to be on the router for it to work.   802.1p and IGMP snooping were needed on the 3rd party router.
    Chris
    Please NO SD stretch-o-vision or 480 SD HD Channels
    Need Help? PM ATT Uverse Care (all service problems)
    ATT Customer Care(billing and all other problems)
    Your Results May Vary, In My Humble Opinion
    I Call It Like I See It, Simply a U-verse user, nothing more

  • Ship to party and vendor relation in third party process

    Hello Experts,
    I need your precious suggestions on my business requirement.
    When we create the third party sales order system creates the Purchase Requisition and further PO is created through purchasing department.
    Suppose in my third party sales order I have two items X & Y, and both need to deliver at two different ship to party XXX & YYY respectively. in order system determine plant 1000 for both materials based on plant determination (CMIR >> CMR >> MMR) and system generates PR.
    I know while converting the PR to PO system check Source list (ME01) to determine the vendor. my requirement is I want to determine Vendor based on ship to party in sales order. suppose ship to party locations for XXX and YYY are Bangalore and Pune respectively and in both place we have different vendor. Both vendor manufacture product X & Y. so I want system should pick the vendor according to ship to party.
    Is there any relation between ship to party and vendor which will work in third party processing ?
    Kindly explain how I can achieve this requirement.
    Thanks,

    I doubt this can't be achieved by SAP standard functionality. You may need to use user exit. Check Third party to purchase req user exit or purchase req user exit to fulfill the requirement.
    Regards,

  • Link between Inbound Delivery and Sales Order for Third Party

    Greetings Gurus,
    My client is using a third party business model in a retail setting that fulfills sales order via purchase req --> PO --> Inbound delivery with GR posting --> customer billing document created through batch based on the delviery quantity ('G' in item billing relavence) --> vendor invoice reciept happens subsquently.
    My question is this, is there an inexpensive (performance wise) way to link the customer billing and the inbound delivery?
    Since the inbound is not in the doc flow i don't think VBFA will suffice. I think the best route would be via schedule line back up, but i have yet to find a link.
    There are process implications for this link for reporting and customer service which are a critical to the business. Point will be rewarded for sound advice.
    Thanks for your help.

    Hi Daneil,
    Through the document flow VBFA you can capture the PO number and the link for what you have asked can be found from table EKBE. check out for field BELNR.
    regards
    prasad

  • How do I disable auto-launch of third party applications (i.e. TeamViewer)  at startup?

    I've loaded a few third party applications like TeamViewer which installed themselves as startup applications which I cannot disable in the system preferences login items.  The obvious answer is don't load these apps but that being said, how do I disable them now that they are loaded without uninstalling to prevent them from launching automatically during startup.  I can quit them after they launch but I'd like to prevent them from auto-starting during startup.  Any insight would be appreciated.

    Look in TeamViewers preferences for this:
    Uncheck it.

  • ERROR in Opening and RUNNING. EXE and .RAR files of Third Party softwarea

    Hello,
    I downloaded  third party softwares having .EXE and .RAR file extension. But none of these files open up  and
    I can NOT RUN them and install them on my WINDOWS 7  System.
    It is possible , some of the associations of these files might have been missing or may have been damaged earlier by any Virus . At moments my system is Virus-Free and clean. Even  downloaded Third Party softwares  are Virus-Free and clean 
    as shown by my Anti-Virus software
    Can any body help me to fix up these issues , or to RESTORE .EXE and .RAR  file extentions , so that I can RUN and install these Third party softwares on my PC
    My EMail ID : [email protected]
    Thanks,
    Shashikant

    Hi,
    What do you mean by saying "to RESTORE .EXE and .RAR file extentions " here?
    Any applications(or softwares) that with .EXE extention could not be run on your PC or only related to some specific application?
    Please take a look at the KB below:
    Can't open .EXE files in Windows 7 or Windows Vista
    Regarding .rar files, we might need some 3rd party tools to extract them and then take the install option.
    Hope this may help
    Best egards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Logic X and 9 looking for third party plugins in the wrong place Mavericks

    Hi all
    i'm having trouble loading up old sessions in logicX and Logic 9 with my recent upgrade of computer which came with mavericks.
    can anybody please help me!!
    Logic is searching for third party plugins like this:
    this is a real pain because when i replace the plugin with the exact same plugin from its propper location i loose all the settings that were originaly used.
    thanks in advance
    Mitch

    See if this helps: Find your hardware serial number.
                   and     About This Mac

  • Need connectivity of SAP Oracle with Third Party tool with dsn

    Hi Friends,
    We need to access SAP's Oracle database with third party tool with the help of dsn creation. For that we need to create 2 staging tables and need a new segment for these tables. Our data will move from SAP transactions to these 2 tables and we want to fetch this data via dsn into another third party S/W.
    I am unaware of such kind of working, can you please help me how to create new segment and how to create dsn for accessing tables in this segment.
    Our requirement is as follow.
    The staging tables are required in the SAP database with user name and password. The user should have all access to the staging table only.
    Requesting your kind help on this issue. Please suggest for further processing of activity.
    Rgds, Krishan Raheja.

    Hi,
    Common way to integrate SAP (database) with third party Application is to use and implement SAP Connector (Java or .Net).
    Using this, you can fetch the data from SAP database to use it in Third party application.
    As per my understanding the method you mentioned, will void the SAP database license term.
    So Please check before doing such configuraiton. Also that method is NOT recommended..
    Regards.
    Rajesh Narkhede

  • Use NI LabView and LabView RT with third party PXI chassis

    I want to use NI LabView and LabView RT, some PXI chassis of N.I and
    some PXI chassis of Third Party( not N.I ) for diversity, How I will Install
    Pharlap ETS ( LabView RT ) on those third party PXI's.
    More simply
    Third party PXI chassis and controllers support LabView RT or not?
    Note: Mark Andre Hary [email protected] of Sensing Systems LLC answer to this question as:
    "You can't.  I think NI bought Pharlap, and they do not offer board support packages (BSPs) for non-NI PXI controllers.  There is no way to get LabVIEW-RT running on a controller not purchased from NI.  You will have to use a standard RTOS like Linux,VxWorks, or QNX.
    Regards

    As described in the web links below, the only way to run LabVIEW Real-Time for ETS on a third-party system would be to follow the procedure for desktop PC computers. You may find that your third party PXI controller may meet the requirements listed in the below link and you will be able to run Real-Time on the controller. If you decide to do this, you will need to purchase the LabVIEW Real-Time Desktop Deployment license (also linked below). After purchasing the deployment license, you will be sent boot disks that will install the real-time OS onto your system. There is no need to purchase Pharlap ETS from Ardence directly.
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/cb3434da94466dd286256e9e006bb775?OpenDocument
    http://sine.ni.com/nips/cds/view/p/lang/en/nid/13751
    Instead of using LabVIEW Real-Time for ETS, you could use LabVIEW Real-Time for RTX instead. This system allows you to run Windows and the Ardence Real-Time eXtensions (RTX) real-time kernel concurrently on one machine. Currently device support for LabVIEW RT for RTX systems is limited to RIO devices. This is all described in the below link.
    http://zone.ni.com/devzone/conceptd.nsf/webmain/9cc60298315a687e86256e78007b3a96
    I hope this answers your question.
    Regards,
    Kristi H - National Instruments

  • Is there any setting in Firefox 8 and above to enable third party add-ons and extensions by default. This is required for our automation. Any quick help appreciated.

    Basically, my requirement is to get all the third party extensions/add-ons enabled by default. Though Firefox8 and above have disabled the third party extensions/add-ons, is there any way to customize the settings so that all third party extensions and add-ons get enabled by default in Firefox8 and above.

    I had that problem once, the way I fixed the two addons I had problems with was to find and manually download the xpi file from the author's page. Once you have that you can edit the install.rtf file that is inside it.
    Here's a guide on how that works.
    http://kb.mozillazine.org/Editing_an_add-on_to_change_its_compatibility

Maybe you are looking for