Connect Apple network to Bigpond Wireless

I have a Bigpond Mobile Wireless Broadband modem. To access the internet I have to switch networks to the Ultimate-F983 device. I have been told that I can make the Airport network see the Ultimate if I bridge the network with a wireless bridge . Can someone confirm this and give me directions how to do it?
I have an Airport Extreme, Express, Apple TV, iPhone and iPad all connecting to the home network to which we had an ADSL modem connected. Now we have moved to NextG mobile broadband we have a mess. I have borrowed a DLINK wireless bridge from a friend to try.

You have to use the bundled remote to navigate the Apple TV and its settings to set up the network.

Similar Messages

How to connect apple tv to xfinity wireless

I am trying to connect my apple tv to xfinity wireless Internet connection. I am using my old first generation I pad going to settings> general> network don't seem to help any suggestions as to how I can connect.

You have to use the bundled remote to navigate the Apple TV and its settings to set up the network.

Trying to connect apple tv through a wireless public hotel connection.

Hi
Im trying to connect Apple TV to a DataProjector in a conference room, connect it to the net via a wireless public hotel network. Then take photos at predinner drinks so they appear in the conference room via photo stream with the ATV screen saver.
ATV is telling me its connected to the hotel public network with a strong signal strenght. But I cant login to my Icloud account saying its unavailable and try later. Same thing with itunes account. From this I'm assuming its connected but Im being blocked by the hotel as I need to enter a password. So where do I enter the password?
Can anyone help here?

Scratch that, It wasnt connected through the hotel network because I tested connecting through personal hotspot on the iphone and everything came alive.

Can't connect Apple Tv 3 To Wireless - "There was a problem.... (-369033213)

Having a problem connecting and Apple Tv 3 (IOS 7.0.1) to our wifi at work.
Create a profile using Apple Configurator, with Wifi settings;
Service Set Identifier
<NAME OF WIRELESS NETWORK>
WPA2 Enterprise,
Protocols set to PEAP
and the username and password set for a valid account.
We get the error;
"There was a problem connecting to the network.
Check your settings and try again. (-369033213)"
Any ideas?

don't think they make a profit selling appletv's think they rely on making the money on itunes store purchases, in which case spending resources on getting them to play nicely on corp networks maybe somewhat low priority as there they would not be used in a way which made any money for them

Powerbook G4 (OS 10.4.11) cannot connect to network/internet

Powerbook G4 (OS 10.4.11) cannot connect to network/internet via wireless. It had been working very well before I changed my rounter to Linksys E4200.
I had consulted Linksys on this issue and they said to check with the "MANUFACTURER"!!! Can anyone help?
My other Mac works fine with the new router.

This link may help. https://kb.wisc.edu/helpdesk/page.php?id=6443
 Cheers, Tom

Officejet 6700 connected to network according to network configuration page and network test results

Office Jet 6700 connected to network according to wireless network test results but I get an unable to connect error when trying to set up web tools or connect to get updates. I have an Actiontec Router with century link DSL. I have tried both manual IP configuration and DHCP configuration. I can print wirelessly from my iphone and can access the web service page on the printer but the printer will not connect outside the network. I do not have a proxy.

Never mind. I found the answer... I set the dns servers to 8.8.8.8 and 8.8.4.4 ( google's dns servers ). Sort of strange that I set the dns servers manually to the ones recommended on my router and it didn't work but when I set them to google's it works...? Spent many hours researching this til I found the answer. Silly printer and silly instrucutions tha never mentioned overriding the dns servers if you couldn't connect.

HT1595 Trying to connect my new apple tv to the wireless network. When I try to use the remote, the Apple TV doesn't respond (doesn't go to the next screen). Could this be caused by a weak wireless signal?

Trying to connect my new Apple TV to the wireless network. When I try to use the remote the Apple Tv doesn't respond ( doesn't go to the next screen). Could this be caused by a weak wireless signal?

It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

HT1430 My IPAD 3 [5.1.1 (9B206)] has a problem. - It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes) - It can no longer connect to the mobile network orange except Wireless (WIFI)

My IPAD 3 [5.1.1 (9B206)] has a problem.
- It restarts every three (3) minutes: it goes out then comes back but lost the previous page (auto lock is set to 15 minutes)
- It can no longer connect to the mobile network orange except Wireless (WIFI)

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Apple Network No Longer Connects To Internet After 6 Weeks.

This morning I was connected to the internet via Apple Network. However, after work I couldn't connect to the Apple Network. Eventually, I started experimenting and I switched internet connections. Now, I can make an internet connection using a connection by the name of "000D...BF60."
I'm connected via an ethernet. I have Airport On.
My question: Is it normal for the internet connection to switch from an Apple Network to another network?
No idea why it changed like this. Apple Network still doesn't work and I was using it since I started with Mac 6 weeks ago.
Thanks.
MacBook Mac OS X (10.4.7)

My question: Is it normal for the internet connection to switch from an Apple Network to another network?
No.
You are probably connecting to a neighbor's wireless network. Unplug your base station and see if the network remains.

Apple TV no longer (1) connects to network, (2) appears in iTunes

Never had a problem until two days ago. Suddenly, my Apple TV:
(1) cannot connect to any of the wireless networks in my building. Each gives a different error: "cannot host any more devices (-14)" (which is a crock), and also errors -7, -6, and 0.
(2) it also no longer shows up at the bottom of iTunes as a speakers option.
What's up? Is this from the 2.3 update? Can't I connect Apple TV to iTunes without a network connection -- like can't I do it directly between the devices, via AppleTalk or Bonjour? Anyone else suffering from this?

SL has affected a small number of tv users, as was the case with all previous system, itunes and tv updates, this will always occur, but in every case so far these numbers are not significant and tend to support an issue with the users specific set up rather than the updates themselves.
It would be impossible in practice to test all combinations of software and hardware with impending software releases. The fact that an update works at all is a testament to how well tested the software is. As a result an update may appear on the surface to be buggy, but in reality a contributing factor is causing your problem.
If there is nothing to fix, further Apple updates may well not resolve your problem, you need to be looking for a problem with your own set up.

Photosmart 7515 connect via USB but not wireless, Device not found on Network

Purchased a 7515 all-in-one, was able to setup wirelessly to MacPro but has lost ability to connect wirelessly. This happened with OS X Lion and nor MountainLion. Have a TimeMachine Airport. Printer connects to network but during setup from MacPro, repeatedly get "Device Not Found on Network" after stepping through wireless installation setup screens. I have reset router, printer, firmware updates, software updates.... at wits end. I have followed the instructions on the below resource page link with no luck. Use WPA-PSK encryption (Automatic AES or TKIP) on network and diagnostics on printer pass.
Please help anyone!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02946597&tmp_task=solveCategory&cc=us&dlc=en&la...

It sounds like the Macs and the printer just aren't communicating.
If you press the network icon on the printer, does it indicate it is connected to the network?
I recommend two additional steps that are not listed in the linked document. The printing system of the Mac may need to be reset as it will clear any software that could be interfering (such as corrupted installations).
Follow the steps as outlined for 10.7 or 10.8 in this document from HP.
The next step is to install the driver package from Apple. This can be found here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Problem connecting MBP to established Linksys wireless network

just got MBP 2.16 (my first mac!). Having trouble connecting to my established linksys wireless network. I have the BEFW11S4 (V.2) etherfast wireless access point + cable router with 4 port switch. Currently have 128 encryption enabled. The linksys router is broadcasting its ID (I can see "linksys" on my mac) but it seems to not accept the password. I tried entering the 26 WEP key, the passphrase, the WEP key in quotes, the WEP after a $ sign... all to no avail. please APPLE community, help out a mac noobie before i have to turn back to Bill Gates....
Dell Dimension 8200, MBP 2.16 Mac OS X (10.4.6) 2 GB SDRAM

To find the IP address or the status, go to system Preferences then network. It will show you the status of any internet connections. You should see one for Airport, it will either show a green light and say 'Airport is connected to the internet' (or something like that) or a red light and say 'Airport is is active but not connected' (something like that). If you double click on Airport or click 'Configure' you will see tabs, click on TCP/IP and it will show all of your details including your IP address.
As for the other, it always refers to wireless networks as 'Airport' and that response is the standard response from a Mac.
the password should be typed in the hex section, not sure about the $ sign. I've never had to do that before. But if you can't connect even with no encription then I would think it is another problem. I would turn off the encription until you can at least get connected and then you can worry about the security afterwards.

Connecting Apple TV to Livebox network

I'm trying to connect Apple TV to and Orange Livebox wireless router. It sees the router , I enter the WEP key but it can't log onto the network. I'd really appreciate any tips on getting this sorted.

Hello, What you need to do is go on your college's webpage and register your device using the Apple Tv's wireless ID (looks something like 69:f9:3c:6d:cb:00). Once you do that you can by-pass the webpage login, connect to the school's wifi, and you're good to go. I just did it myself.

How to connect pcs to secured apple network?

My girlfriend has two pcs, one for work and one for personal use. She is able to connect to my apple network if it is the automatic, unsecured setting but if I setup a secured network it seems to be nearly impossible her to connect. We have tried the WEP 13 character password, which we understand is almost useless. We have tried the WPA2 13 character password also. Does anyone have any knowledge of this problem? It does not seem to be a very common issue because I am not able to find any answers which make it work yet.

No guarantees, but this worked perfectly on my sister's XP machine.
On your Mac......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select your Apple router and click Manual Setup
Click the Wireless tab below the row of icons
Change the setting for Wireless Security to WPA/WPA2 Personal
Use an 8 character password consisting only of of numbers and lower case letters with no spaces
Click Update to save settings
Restart the PC and try to log on.
If still no luck, the Windows FireWall settings likely need to be checked by a PC guy who understands them. The anti-virus program may also be blocking the connection.

Best connection for Windows Vista Desktop to Apple Network

I have a Windows Vista/Dell Desktop that I've hooked into my Wireless Network which is all Apple products. The Wireless card in the Dell is a D-link, but I have a constant problem with it dropping out when connected to my Apple TV. I'm wondering if I can hook an Airport Express directly into the Dell by an Ethernet cable, effectively using it as my Wireless Network "card" for the Dell. That would make all my Network components Apple products which I think would improve the reliability. Does my plan make sense??

Yes, this will work fine if you have a good wireless signal at the location for the Express. You would configure the Express to "join" the wireless network created by your Apple base station. Make sure that you put a check mark in the box next to "allow ethernet clients" on the setup for the Express.
If the wireless signal is not strong at the location of the Express / Dell, you might also consider the use of ethernet power line adapters. I've had very good luck with these devices and find that overall, they perform faster and more reliably than wireless.

Connect Apple network to Bigpond Wireless

Similar Messages

Maybe you are looking for