Connect Apple Time Capaule with Sony Smart TV

Hello
how can i connect time capsule from Sony Smart TV ? I would like to stream videos stored in Time capsule to Sony smart tv which are both connected on same wifi network. I would like to use my iPhone as controller and would like to stream video on Sony Smart TV from Apple time capsule. Please suggest me easy solution other than connecting apple tv. May be a third party iOS app.
Thanks

not sure how time capsule works but the Apple TV only connected to a shared itunes lib not to upnp
if your time capsule works with upnp then an ios device with an upnp (app store are full of free such apps) with
airplay mirror to an Apple TV would do it
the fact that your tv is a smart tv is irrelevant in terms of Apple TV it works 100% the same way on a cheap 30" non name tv with a hdmi port as the most einstein'ish tv around
but if the tv has build in upnp client and the time capsule support upnp it would work out of the box without any apps or appletv's

Similar Messages

How do I connect my time capsule with a Lynksis wi fi netwotk?

How do I connect my time capsule with a Lynksis wi fi netwotk?

You cannot extend or repeat a non-apple router in an apple router..
You must plug it in via ethernet and then setup roaming network (or if you like a completely separate network.. makes no difference from the TC point of view). TC is in bridge mode. That is router bridge not wireless bridge.. I gave the info on the other thread you are running.. very confusing when you ask in multiple threads.

How to setup apple time capsule with FIOSinternet and VZ router?)

Hello,
I have Apple time capsule and the VZ Router MI424WR. I current set up:
1. VZ router - wireless off, the rest is standard
2. Time capsule: Wireless on in Bridge mode
Result: Internet works but the wireless network is very in-stable. Airtunes is nearly not usable.
I searched in the Internet and there was several comments that is is not a good combination. Therefore it is recommended to convert the VZ router in a modem mode and use only the Time capsule as the router. I tried this several times I do not get it to work. I followed this procedure (http://data.agaric.com/node/2160) but then I need the PPPoE Account number and password. But there do I get this? The Verizon support was not really helpful.
Please, is there a good and complete description to solve that issue?
Thanks in advance
Moebius

Go back to your first setup ...
Verizon router with wireless turned off
Apple Time Casule with wireless turned on
Method 1:
With the Time Capsule in "Bridge Mode", if I remember correctly, you should connect the WAN port to one of the open ports on the Verizon router (I believe bridge mode also turns off the DHCP server on the Time Capsule, if not, find that and turn if off as well).   Change the addressing mode for the Time Capsule to "static" and assign it an address on the LAN which is not in use (choose something you know is out of the way but on the LAN -- I suggest 192.168.1.180 to start -- you can change it once you get everything working).
If it doesn't work this way for you, move the cable from the WAN port on the Time Capsule to Port 1 and try again.
Method 2:
This results in a router behind a router setup, but unless you have devices connected directly to the Verizon router, it shouldn't be a problem.
With the Time Capsule disconnected from the Verizon router, turn on "Connection Sharing" (not bridge mode) and make sure DHCP is enabled on the Time Capsule. You need to change the address range being used by the Time Capsule (which I think defaults to 192.168.1.x to another network -- I suggest, 192.168.2.x with a netmask of 255.255.255.0 and give the router an address of 192.168.2.1 on the LAN side. Now, connection the WAN port to one of the Verizon router LAN ports. If you had anything connected to the Verizon LAN ports, move those over to the LAN ports on the Time Capsule and reboot them.
Method 3:
This is the least desirable of the scenarios because it relies on Verizon's crappy radio in their router (the Time Capsule has a much better radio and support 802.11n as well as b and g) whereas Verizon's only support b/g.    Go back to the configuration for Method 1, but also turn OFF wireless on the Time Capsule and turn on wireless on the Verizon router.   Try both bridge scenarios described -- using the WAN port first and if that didn't work, then moving the connection to port 1.
There is no scenario where you can place the Verizon router behind the Time Capsule -- since I believe Verizon is using all MoCA connections for the WAN side of their connection (you'd have to get Verizon to convert you to ethernet WAN and then they would not support you most likely for any STB issues with your FiOS if the Time Capsule was between the ONT and their router ... so don't even bother wasting time there ... more headaches than it would be worth.
If you're still not sure exactly what each configuration screen on the time capsule should say, post some screen snaps (or the configuration settings/choices which you are unsure about and someone will likely know the answer here).

Can i connect my time capsule with my router as a bridge ?

can i connect my time capsule with my router as a bridge ?

I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
Do you mean wireless bridge??
If you mean wireless bridge the answer is maybe but unlikely.
If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
If you want specifics ask specific questions.

Is Apple TV compatible with Sony WEGA KV34HS420?

Is Apple TV compatible with Sony WEGA KV34HS420?

It has one HDMI so yes it should be compatible.

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

I cannot connect to my wrv200 with sony ericsson p990 & nds lite...

I cannot connect to my wrv200 with sony ericsson p990 & nds lite...

for getting connected to the NDS through the router , try out the mentioned steps on this link ..
regarding sony erricson P990....i guess u will need to look into its wi-fi settings..
ensure that if the router has the wireless security enabled on it..it is supported by the devices....NDS lite only supports WEP....not sure about P990

Network apple time capsule with other modem

I am way over my head here. I am trying to figure out how to "bridge" my new apple time capsule with my ATT Uverse Modem. I have the time capsule primarily for backup, but it serves a wireless function as well does the ATT Uverse Modem. Someone did this for me in the past, but my Time Capsule died, and I disconnected it. I can not figure out how to wire it all back together. Is there a diagram out there?

Plug the TC into a computer.. complete isolation from the network.
Open the airport utility.
Put the TC in bridge mode.
Go to the wireless page and setup wireless .. create a wireless network. I recommend you do roaming network and so space the TC and the uverse modem by a few feet.
But it is up to you.. you can use a completely different network name and security if you want.
http://support.apple.com/kb/HT4260
Although the article is for multiple apple routers it will be fine with 2 different routers.
Only I would set fixed wireless channels.

Connecting to time capsule with apple tv

I am trying to figure out how to access the content on my time capsule with my apple tv.

I assume that you have your iTunes Media folder located on the Time Capsule.
If so, enable Home Sharing on the iTunes host computer. Do the same for the Apple TV and the media folder content on the TC will become available.

Configuring Apple Time Capsule with Netgera DG834N modem

I'm configuring a wirless system with:
a 3 year old Netgear DG834N modem / router set to modem only mode
a 6 month old Apple Time Capsule
a new Netgear WNDR4500 router
Previously I'd linked the ATC in bridged mode to the DG834N with the latter in modem + router mode and all was fine with no conflicts between the ATC and DG834N.
Questions:
what is the best mode for the ATC now that it links to the modem only mode DG834N?
do I need to run each on separate non-conflicting channels for both 2.4Ghz and 5Ghz bands?

OK.. sorry I should have twigged with the TNZ.. pppoa is a b pain in the nether regions.. that should get through all the apple filters for language.. but privately I would fill it out with the aussie slang version. In Australia all our ISP use pppoe and some allow pppoa as well. You cannot bridge to pppoa.. the nature of the beast is that it has to happen on the modem.. ie the ATM interface.
There are tricks to get around it.
1. Obviously just use the modem router as your main router.. that solves the problem but as a router,, it is lousy. Netgear build all their modems with minimal interface. And it is slow.
2. Since you cannot do full bridge you can use half bridge.. this used to be common but not so much now. It has some issues with dynamic IP and lots of linux based routers spit the dummy. (almost everything is now linux due to free source). Look up the 834N if it is possible to do half bridge and give it a try .. Maybe with DGTeam firmware.. there are alternative firmware to some netgear models since the netgear one is so devoid of functionality. Other modems do support it.. it is not gone but well down the list now. (FYI: the problems with half bridge is the IP rotates but the client doesn't have the IP updated until the local lease time expires... so lease is set to ridiculously short times to compensate. )
3. DMZ.. this is double NAT but without a lot of the bad effects.. A router in dmz of another router simply passes all packets both ways as if it is a bridge. The problem is speed.. packets only go as fast as the router can handle them.. Adsl aint that fast so it isn't an issue that way.
More importantly, you are still filling the NAT table of the modem's router, so it can fall over with too many connections.
4. There are two tricks but Netgear would have to be replaced. Also the router has to support pptp to pppoa relay. Not sure if the WNDR4500 will but it is used by dd-wrt if that is possible. Pain to setup but very solid.. Thomson speedtouch and later models all support this. You make the connection to the modem via a pptp tunnel..which is able to pass the authentication.
The Draytek also support a trick using pppoe to pppoa relay.. look at models like 120.. This is different to the above but using a similar trick. (There are a few other brands to offer it but you can see draytek have specialised in it.. it is common issue in uk which is a big market for them.)
http://www.draytek.co.uk/products/vigor120.html
Note specific reference to apple routers.
5. One to One NAT.. this is true NAT.. what is normally referred to as NAT is NAPT. One public address to many private addresses. True NAT is like DMZ.. it does pass through the router.. but all packets are simply passed from one public to one private IP.
This mode is available on speedstream models like 4200.. 6520... bit ancient now.. but they worked really well. Most people looked at the interface and had no idea what NAPT and NAT stood for. And Siemens wasn't bright enough to explain it.
Thomson has it.. but hard to setup. Draytek have most modes although not tried in their modems.
That probably covers the field.
Most people resign themselves to 1.
I wouldn't bother with netgear forum.. but look at forums for your Telecom NZ and look at solutions people are using to run a router behind the pppoa authentication problem.

Connecting to Time Capsule with a Powerbook G4

I have 2 computers, a MacBook Pro and an older Powerbook G4. I recently upgraded to TC, and can connect fine with the MacBook, but cannot with the PB G4. the G4 can find the TC, but when i put in the password, it just says connection failed. i only want to connect to the internet with the G4, not backup as that is being done on the MacBook.
Any help would be greatly appreciated!!!!
thanks

Thanks for teh OS info. I thought you might have been running an older version of the Mac OS that did not support higher encryption levels. I see that is not the case.
My MBP and PowerBook are both talking to nicely to our AirPort Extreme Base Station (AEBS), bought right before the the TC came out. The MBP is at 10.5.8 and the PBG4 is at 10.4.11. The only problem I had in setting up the PB was was remembering the right password; I got the PB about a month after I got the MB and AEBS. I had set a somewhat different password that I normally use (getting too old to remember multiple, complex passwords) and was mistyping it.
You might try running Keychain Access in your Utilities folder. Find the entry for the TC and double-click it. In the resulting window, check "show password." You'll need to enter your computer admin password, but the exact way you entered the pass into TC will be revealed.
If that's not the problem and is not, as I suspect, a hardware issue, you may consider posting either in the Leopard Networking forum here:
http://discussions.apple.com/forum.jspa?forumID=1222
or in the Airport and Time Capsule forums here:
http://discussions.apple.com/category.jspa?categoryID=140

Cannot connect to Time Machine with the Mail app open

This is the first time that I have tried to use TM since upgrading to Lion. I have a MBP with a Time Capsule with my TM backups on it. I want to retrieve some emails that got deleted. Prior to Lion if I had Mail open then TM would know that that is the app I needed to restore some files to. But with Lion I can't figure out how to get a few emails out of TM. TC is wirelessly connected to my MBP. Thanks for any help, Judy

Connect the external drive and try using Finder to locate those files. 'Users'' is a high level folder you will want to drill down into for pictures and stuff.
Least, my system works this way.

How to connect a time capsule with an ATT Elevate Hot Spot

Hi,
Need help connecting my time capsule to my ATT Elevate Hot Spot....since I have no ethernet connection.
Thanks!

Not sure how much we can help on this, but as a test, if you turn off the wireless on your MacBook and connect it to the router using an Ethernet cable, you should be able to log onto the Internet.
If you can, you know the Ethernet connection is working, and it will be a simple matter to connect the Time Capsule to the router and get it set up.
If you cannot get an Internet connection when you connect the Mac directly to the router, then more troubleshooting will be required.

Does Apple TV work with Sony Grand WEGA TV

I have a Sony Grand WEGA KDF42WE655 TV and would like to purchase Apple TV, but want to make sure it works with the TV first. Does anyone have a TV like this and does Apple TV connect to it? Thank you.

my sony bravia works fine
if a tv have a hdmi port it should work end of story
a company such as sony would not release tv sets which did not follow the hdmi std.
so it's like if you have a computer and buy a monitor connect the cable and recieve the visuals on the screen

HT1178 i can't connect the time capsule with my mac using the aiport utility. i want to use the time capsule to make backup for my mac book pro. the time capsule is giving a flashed amber light. please advice me

the time capsule is giving flashed amber light and i cant connect it to my mac book pro. i want to use it with the time machine to make backup for my mac. please advice me.

To do the setup, plug it in via ethernet.. do not try to setup over wireless.. Once it is setup you can plug the TC into the network and use wireless.
Most likely you will use the TC in bridge to an existing modem router.. but we cannot help as you have no details of the network setup.
I do recommend in the setup of the TC you use SMB type names.. that means, short, no spaces pure alphanumeric.. as later Mac OS do have issues with long names, spaces and that apple shocker, the apostrophe.

Connect Apple Time Capaule with Sony Smart TV

Similar Messages

Maybe you are looking for