Connect Apple TV to Panasonic?

How do I connect an Apple TV, Model A1400 to a Panasonic TX-32LXD1

Welcome to the Apple Community.
Analogue (component, composite etc)
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
Most types of HDMI to non HDMI connectors or converters won’t carry audio, in such cases you may also need to convert your optical output to an analogue signal using a DAC.
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

Similar Messages

AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007)

AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007) - have reset AppleTV, tried 3 HDMI cables.

Tried again as you suggested - no luck. Ref sequence below
A. Pressed menu & down to reset Apple TV
B after reset & restart pressed menu & up buttons to change resolution. After pressing both buttons for 6 sec, LED starts flashing - released both buttons. TV screen blank. After 20 to 30 sec horizontal lines came on screen remained for 20 sec then screen again went blank. Waited for couple minutes. LED still flashing - pressed Menu button for 2/3 sec - flashing stopped & LED glows continuously. Screen blank
C. Reset the unit again by pressing menu & down. When it restarted - while LED was still flashing, got orange color screen with Apple logo in the middle. This screen remained till LED stopped flashing & then screen went blank

How to connect macbook pro to panasonic tv with hdmi cable

How to connect macbook pro to panasonic hd tv with hdmi cable

Hi m,
It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
This is if your MBP is from April 2010 or newer:
http://support.apple.com/kb/HT4241
First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

How to connect apple tv 2 to pioneer pdp s35

How do I connect apple tv 2 to pioneer pdp.s35 tv? I connected to one of my pioneer receiver's hdmi ports but when I cycle through the inputs I can't find apple tv. Thanks.

Welcome to the Apple Community.
I don't have or indeed know anything about your receiver, but unless the Apple TV can see an active device and connect via HDMI it won't turn on. You will need to set your receiver to use the correct input and then turn on the Apple TV.

How to connect apple tv2 to receiver

Apple tv is connected to tv via hdmi - working perfectly. But i would like to connect apple tv to my receiver as well - for surround sound on movies and for streaming audio from the computer.
My receiver has 3 optical ports in addition to the DVD coax ( CD, CDR and TV) which one do i use to connect from apple tv - none seem to work.
Apple TV set to dolby output.
receiver digital in is turned on
No sound from the receiver
Help!

Welcome to the Apple Community.
You need to use one of the optical ports.
Are you sure they are optical ports.
Are you sure you are matching the input to the output correctly on the receiver.
Have you tried adjusting the audio out and Dolby digital settings on the Apple TV.

How can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port

I have ask this question in the local shop but they could not answer me - how can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port

I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
Thanks.

I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

Your TV hasn't entered some odd picture in picture mode has it with two 'inputs' side by side?
AC

How to connect Apple TV when I have run out of HDMI Ports?

I have a Sony Bravia TV with 3 HDMI Ports - in those I have connected:
- Sony Home Theater Surround Sound
- Playstation
- Sky Digital TV HD Box
Is there a way to connect Apple TV without disconnecting any of the above? (and without buying a new TV with 4 HDMI ports!)

lkrupp is correct, the only soution is to add what's called an HDMI switch to your setup. The HDMI switch normally has 2, 4, 6, or 8 HDMI inputs and one output. The output goes to your display. You then select which input you want to choose.In your case, you can do one of two things:
Connect all your sources to the HDMI switch. You then select sources via the HDMI switch and you no longer need to change HDMI inputs on your TV.
Disconnect one of the HDMI sources you have (let's say it's the Playstation) and plug both the Playstation and the APPLE TV into the switch. In this setup you need to change the input on both the TV and the HDMI switcher.
The simplest setup in your case is to buy a 4 or 8 port HDMI switch and put all your devices on the switch. If you are looking for inexpensive HDMI switches, you need to look at Monoprice. The stuff is all manufactured overseas and can be hit or miss but it's the cheapest that you'll find. If you feel like you need some guidance and help, then try www.hdtvsupply.com. They have a good selection and great support.

How to connect Apple TV to DVD blu-ray home theatre

Hi guys, I am planning to buy Apple TV2 and I was wondering is there setup guide for connecting to HDTV and home theatre system. I currently have LG HDTV and LG DVD Blu-ray Home Theatre. They are connected with HDMI 1.3 cable and I had to get optical cable to get sound from TV to Home theatre.
How is Apple TV fits into that? I have 1 HDMI slot free on TV and 2 HDMI inputs on DVD system.
I was thinking just to connect Apple TV to DVD via HDMI? Would that put sound on home theatre system?
Thank you in advance.
ddrasko

You have read home theatre manual about playing sound from external device.
You doesn't need to connect home theatre to tv at all as you have get video from apple tv.
Connect video output from apple tv to tv(may carry sound along) and optical cable from apple tv to home theatre.
That will do. You can mute sound of tv(in case hdmi carry sound along) or using other function(on samsung ) and hear from home theatre sound from speakers.

How to connect Apple TV to a stereo?

What is the best way to connect Apple TV to a stereo with only analog audio input?

Welcome to the Apple Community.
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

How to connect apple tv to NAD T748 AV Receiver

Hi All, Trying to connect apple tv to NAD T748 home theatre.
Any one achieved this?

Thanks, discovered the only way I could get it to work was to run an HDMI cable from my Apple TV to TV's HDMI 2. HDMI 1 then runs from TV to HDMI out on T748 AV Receiver
Could not find any reference to HDCP for NAD T748 or TV
TV = Samsung UA40C6200UMXRD

How to connect Apple TV (2g) HDMI to HDTV with only component video input.

Trying to connect Apple TV (2g) HDMI to HDTV with only component video input. Can I use a simple cable or do I need a converter box/plug? Is the HDMI signal coming from ATV encrypted or HDCP enabled?
The TV is HD, but only has a component input and not HDMI. Apple TV 2g only has HDMI output.

google component hdmi converter
but they are pretty expensive and may not work at all
and will not work with any DRM material as in movies you reant and maybe netflix and the sports thingy

How to connect Apple TV with AT&T Uverse

Need help pls. Not sure how to connect Apple TV2 to AT&T Uverse. I know I need to connect one cable to my wireless router, and another cable from the HDMI port to my TV. That part is clear. But my Uverse router is in an upstairs closet, and my TV is downstairs in the living room - too far apart to connect cables to both devices from my ATV2. Do I need to somehow put a bridge router next to my TV, so that I can connect my ATV2 to both my bridge router and to my TV? Thank you

Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

How to connect Apple TV to ipad2 with air play

Hi...how to connect Apple TV to ipad2 with AirPlay

Hi. Your Apple TV should be connected to the TV (I'm using HDMI cables) and connected to the internet via a wireless or ethernet connection.
The best way to test AirPlay is to play a movie trailer from the iTunes store. When you play a trailer you will see the AirPlay symbol at the bottom of the screen. Click on it and it will show your AirPlay devices - in your case the Apple TV. Select it an your video and sound will come out of your TV.
I hope this helps. Google the AirPlay symbol. I tried to paste it into this message with no success.

How to connect Apple TV with an iPad ?

How to connect Apple TV with iPad ?

Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

Connect Apple TV to Panasonic?

Similar Messages

Maybe you are looking for