Connect AppleTV to TimeCapsule via cable?

Hi,
My TimeCapsule and AppleTV stand right next to each other.
I use g-wifi components in my WLan forcing the whole network to use slower g rather than n standard.
Could I Ethernet connect AT to TC at all and would this allow to benefit from faster connection at cable speed between ADSL->TC->AT?
thanks for a hint,
Flavio

Welcome to the  Discussion Forums.
Yes you can replace the wifi connection with ethernet, but there are a couple of things of note here.
As Rudegar points out, it won't improve your internet connection.
You can actually have wifi equipment too close to each other.
You don't need to have your network set at 'g' only. If you set it for 'g' and 'n', 'n' capable devices won't be able to run at full 'n' speed, but they'll certainly work much faster than 'g'.

Similar Messages

  • The Apple time capsule provides disc memory, a wifi network, and router functions. It would normally be connected to the internet via cable modem.  If I wanted to use a wireless cellular connection to the internet, how would I do that?

    The Apple time capsule provides disc memory, a wifi network, and router functions. It would normally be connected to the internet via cable modem.  If I wanted to use a wireless cellular connection to the internet, how would I do that?

    If I wanted to use a wireless cellular connection to the internet, how would I do that?
    The wireless cellular device would need to have an Ethernet port, to provide an Ethernet signal to the Time Capsule's WAN port.

  • Is there anyway to connect IPad to IPod via cable?

    Is there anyway to connect IPad to IPod via cable?

    Many programs will allow you to get your music off your ipod/ipad and onto a computer so it can be resynced. Phoneview (Mac) and transpod (PC) are two examples.
    This program
    http://www.theboysdownunder.com/ipod2ipod/
    claims to be able to do what you want on the PC.

  • Airport Express not connecting to the internet via cable modem

    Hi. I need help. I just bought an airport express to get wireless internet and airtunes. I connected everything and ran the airport utility. Everything is good, so it says. I can play music through my stereo using airtunes, but when I try to get on the internet I get nothing. My macbook recognizes the network, but I can't load any pages. I've tried unhooking the ethernet from the express and unplugging the power from my modem, then plugging my modem back after about 30 seconds, then reconnecting the ethernet to the airport after another 30 seconds but still, nothing.
    Does anyone know what I'm doing incorrectly? When I connect my macbook directly to the modem via ethernet I'm on the internet just fine. Thanks!!!!

    Do you have the Express setup to distribute IP addresses?
    If you do, you might turn it off in the Airport Utility.
    Also check you IP address on your MacBook.
    Make sure it is not self-assigned or something different than what your provider (cable modem) usually assigns you...
       Joseph Kriz

  • MBP connects to internet directly via cable modem, but airport wifi not working

    Today I came home to a broken wifi. I think Time Warner Cable had an outage in my area which confused my modem and airport router, but anyway. After a short while I was able to connect to the internet if I plug the cable directly from the modem to my laptop (which is how I am currently posting this question). But if I instead connect the cable to my airport and try to connect via my usual wifi network, I don't have any internet.  Here is what I have tried:
    - cycle cable modem several times
    - hard reset as well as factory reset of Airport
    - trying to connect the cable modem to the airport via both WAN and Ethernet entry, power cycling the Airport, waiting several minutes on each to see whether I get internet
    - Using Network > Assistant to create a new location and network
    Under airport utility, the status messages I get are as follows:
    - Internet Connection (tells me to cycle my cable modem, which I have tried)
    - No DNS Servers (I haven't touched any DNS addresses, but this has never been an issue that prevents me from connecting to wifi)
    - Ethernet unplugged (since I'm using the cable to write this message...)
    My hardware is:
    - MBP early 2011
    - ubee cable modem (standard issue from TWC)
    - Airport Express 802.11n (2nd generation).
    My laptop is able to connect to other wifi networks, so that is not the issue.
    Any help or advice is appreciated.

    ...And now it all of a sudden works. However, as I can't delete this post I hope others who have had similar problems may have solutions for future issues.

  • HT4623 Unable to connect 4S to itunes via cable

    Unable to connect to Itunes via docking station

    An Apple docking station? What is happening or not happening when you try and connect?

  • Is it possible to share one wifi with two time capsule which are both connected to the network via cable?

    Hello Community,
    this is my first contribute here so please do not expect a 100% question with all important information! I will do my very best!
    Situation:
    2 Time Capsule (one 1st generation, one 4th generation)
    both connected wired to my network
    Question:
    Is it possible to create one unique wifi Network with both TC's ? So wireless Devices connect to one TC (which is best at this position) but both TC's route traffic over wired connection?
    Understand what I mean?

    Hi Bob,
    just configured it, but my primary TC's is in orange blink state now!
    Error Message is "Double-NAT"! If my understanding is right, than the Problem is that my Router and my primary TC's does NAT!
    Do I have to deactivate DHCP and NAT on my router or is there another way to work around?
    Thank you so much
    Christoph

  • E55 fails to connect via cable or turn on Bluetoot...

    Good afternoon!
    I have the following problem with my E-55:
    I was often using the phone as a modem, connecting it with a cable and using Nokia Suite. Some 2 months ago the computer (and Nokia Suite) suddenly stopped recognising that a phone was connected (it remained undetected, although the battery was beginning to charge). But it was still connecting via Bluetooth.
    About a month later a problem emerged with the phone's memory. Although all apps were installed on the memory card, and text messages occupied some 300kB, NetQin Mobile Guard was only finding 4.5kB files to delete from cache and I was constantly receiving an alert about lack of memory. I couldn't send text messages (although I could receive them), add new contacts, edit calendar entries or change mailbox settings (the e-mail boxes were empty). I could still use the phone as a modem connecting it via Bluetooth.
    The day before yesterday, for the first time I couldn't turn on Bluetooth, but when I closed all apps (using NetQin Mobile Guard to do that), it worked.
    But yesterday it didn't. I did a hard reset. The phone is working, now has over 50MB free memory (compared with the mere few kB earlier). But it still doesn't connect with the computer via cable, and I still can't turn BT on (alert: Cannot carry out Bluetooth operation).
    1. What can be the reason?
    2. Can it be repaired? (I expect deep reset does the same as hard reset, so won't change much?)
    3. If not, is it possible to carry over contact and setting backup from Nokia Suite (in .nbu format; I expect it would have to be converted) into the phone and running it without connection with Nokia Suite?
    Loads of thanks in advance for your help!
    Cheers!
    -Mike

    Hi m_b_p,
    Thanks for your post!
    We're sorry to hear that your device has suddenly become unresponsive to activating the bluetooth. A wire connecting the bluetooth part to the phone may have been dislodges some how. As you have performed a hard reset, we suggest you to take your device to your retailer or Nokia Care Point to have it inspected. 
    You may need to bring a proof of purchase.
    Let us know how you get on with this.
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Connecting to local network via Airport?

    Hi!
    How to set up the MacBook to reach computers on a local network, wirelessly?
    I have 4 computers on my local network. 3 macs, 1 pc.
    Set up is: Zyxel Prestige 2602R and a SonicWall wireless firewall.
    2 macs and the pc are connected to the router via cables.
    The MacBook is running wireless.
    Everything is fine connecting to the internet. But there is no conectivity
    to and from the MacBook, unless I connect it via a cable.
    What am I overlooking?
    JanD

    Check that you have sharing on all your computers set up. Also on your macbook you will need to set up sharing also. This is done under your system preferences window.
    You can connect to your other network computers in finder. Click network in the left finder pane and if they are set to share correctly you should see them come up. Just connect to them and a connection should show up in the left finder pane.
    Mort

  • HT204023 If my iphone is connected to the internet via wifi will it use my cellular data if I use it as a personal hotspot or will it use the wifi's internet???

    If my iphone is connected to the internet via wifi will it use my cellular data if I use it as a personal hotspot or will it use the wifi's internet???
    The wireless on my laptop brokebut I can still connect to my phone when I plug it in. My iphone is connected to the wifi but is this being transfered onto the laptop or is it using up my data???

    Personal hotspot shares your cellular connection with other devices via cable, bluetooth or WiFi. If you turn on the hotspot, the phone will be disconnected from the WiFi network you are on and share access to the cellular connection. That's what it's for. It's using your data plan if that's what you're trying to do.

  • Can I use AirPlay from my PC to my AppleTV when connected to an AirPort via LAN cable?

    Well as stated above I'm wondering if I can use AirPlay from my PC to my AppleTV when my PC is connected via LAN cable to an AirPort.
    I'm asking because usually your PC has to be on the same Wifi as your other Apple device, so AirPlay can function, and id love the ability to Stream via AirPlay but still be connected to the internet via LAN cable.
    Thanks in advance for any help!

    AirPlay is not restricted to wireless only. It can also work over Ethernet. Basically as long as there is a connection (on the same subnet) between the iTunes host and the AirPlay "speaker" streaming should take place without any issues.
    FWIW, My Win8 PC is connected to a Time Capsule via Ethernet. In turn my Apple TV is connected to the TC's wireless network. I have no trouble streaming from the PC to the Apple TV in this configuration.

  • Connect timecapsule to mac via cable

    I need assistance in connecting my time Time Capsule to my Mac via cable. I bought the Time Capsule on the advice from an Apple store that I could connect via cable without using the WIFI. I am having trouble trying to find instructions on how to do this and I was referred by an Apple store employee that I need to call Apple support. Getting an answer from Apple seems to be troublesome and wasting of my time and money.
    Can anyone help me please?

    Ethernet cable .. not USB.. you can only use ethernet.
    Do you have ethernet setup on the computer with DHCP automatic??
    The airport utility is near useless with ethernet because it totally depends on wireless.. but if you notice the little tiny
    Other WiFi Devices
    In the top left corner.. when you connect by ethernet.. click it and you will find the option to setup by ethernet.
    Here is another way to do it manually.. that cannot fail.. almost.
    Airtport Utility can't find Airport Time Capsule on either of my 2009 Macs

  • How do I connect a printer to my TimeCapsule via ethernet cable?

    My printer doesn't have a USB connection, nor does it have built in wireless.  Just ethernet.  How would I connect it?  Just plugging it in doesn't seem to work.

    I have the feeling TC is not prepared for such an action, those eth ports are for connecting other macs / PCs via eth cable, i.e. those not having wl. Printing is via USB, as long as I correctly remember the instructions. I have a similar Apple device, the Airport Extreme, which is identical to TC, just it has no disk inside.
    It is not clear why you purchased such a printer before clarifying connection method.
    Perhaps others may jump in for help.

  • My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

    My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.  I get an error message with multiple suggestions but none of them apply to my situation.
    I am so dissatisfied with this printer.  I'm sorry I got it from Amazon because now it is a hassle to return it.  I will never buy another Canon.
    The printer menus are confusing.  I hate using it.  I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model.  Never again.  Stick with cameras.
    Marcy Hotz

    This note won't be as angry and frustrated as the last one...
    Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer.  I deleted all the old stuff.
    I also had several scanning applications on my drive which just confused me.
    When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which).  So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
    It works now.  So I'm satisfied, will keep this maching.  I just had to take some time, sit down and focus on the problem.

  • How do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system prefer

    how do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system preferences.  what else do I need to do?

    First, make sure your TV is tuned to display the correct input signal. Most TVs have several inputs (multiple HDMIs, cable connections, RCA etc) so double-check that you're using the correct one - HDMI1, HDMI2 or whatever is written next to the port.
    I assume that you have a mini-Displayport to HDMI adaptor? If you open displays preferences, first tick the box that says "show display preferences in menu bar" then locate the menu and click Detect Displays. See if that helps.
    Matt

Maybe you are looking for

  • After upgrade to itunes 5.0.1 names of contacts won't display in messages or phone

    Updated to iTunes 5.0.1 over wi-fi connection at home and now messages and phone calls only show number instead of name in contact list, how do I resolve this issue?

  • Creating a Simple document Approval workflow in SPD

    Hi Having configured workflow manager 1.0 I  have attempted to create the simplest approval workflow. on my document library I set content approval , content type management and versioning. I have  left out check in and checkout to speed up my testin

  • Apps stuck in waiting after updating on iOS 7.0.2

    Since i updated my iPad 2 to iOS 7.0.2 i have this persistent problem, I tried everything to make it normal but it never happens. After i update an App on my iPad throught the AppStore on the iPad this problem occurs. 1. Eventhough the update is comp

  • How to block Iframe injections?

    Hi, I am maintaining a web site. When it is browsed through a wireless internet service provider, an iframe appeared in the site. The wireless internet service provider is injecting the iframe. Please let me know is there any way to block the IFrames

  • IDoc serialization in XI

    Hi Experts, My scenario is Idoc to Idoc SAP system (R/3)>XI> Legacy SAP I need to do the serialization of IDoc i.e in what order the Idoc is sent from SAP system Xi should process the Idoc in same order(EOIO) for outbound scenario. Can you please let