Connect As: Using Apple ID Not Working

Hi,
I want to use my Apple ID when connecting to my iMac from my MacBook using Back to My Mac instead of using the credentials of my iMac.
When I go into finder and click "Share Screen" or "Connect As:" I select "Using an Apple ID" however when I click "Connect" it refuses the cinnection.
Both computers have Back to My Mac enabled with the same Apple ID.
I can connect fine when I use the credentials of my iMac (my username and password).
Can anyone help me out with this?
Thanks
Michael

I am having the same problem!
Did you get it solved?
Thank you.

Similar Messages

"Connect using Apple ID" not working

I have two Macs both running latest version of Lion on my home wireless network (created using a Netgear WGR614v9.
Both Macs have a user account associated with my Apple ID, and I've enabled file sharing for the user associated with my Apple ID on Mac "A"
Mac "B" will connect fine to Mac "A" if I log on using my OSX account and passord, but if I try to log on using the Apple ID associated with that same account, I get the error below:
Could this be an issue with my router or is there some config on the Mac side that might be wrong?
Thanks

I am having the same problem!
Did you get it solved?
Thank you.

HT201303 How do I verify my account to use apple tv not working when I put in my account details

I need to verify my payment purchases information in order to use my apple tv. please assist. Merry xmas
j

Exactly as the instructions say to. Enter the information requested on ATV. If you have passed that screen you can verify the info in iTunes.

Apple TV not working with new softwear iOS 7, Apple TV not working with new softwear iOS 7

Since updated softwear on iPad to 7.0 Apple TV not working?

I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly). Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

Apple tv not working with panosonic TH-50PX75U old.

Apple tv not working with a 3-4 year old Panasonic TH50PX75U tv, works fine on all other tv's in the house. HDMI cables seem to be fine they work with the DVD and DVR. Ratio is set to auto, apple logo on screen when booting up then Goes away. Seen twice for a split,nano second the apple tv menu on screen. Then in upper left corner of tv a grey box appears with HDMI 2 appears. any help would be great... Thanks in advance, Tom

I had a similar issue, without the actual error message. If you can't get it running at all, you will be forced to do what I, and many others have done over the past 24 hours. You can restore your Apple TV to factory settings (you will then have to enter your ID, passwords, etc., to connect everything again--sigh--) by obtianing a Micro-USB cable (found one today at Best Buy for 5 bucks, available other places that sell electronics, etc.) disconnect your Apple TV, and connect it via the micro usb cable (which attaches in the back of the ATV) to your computer, plug the ATV power cord into the wall and open iTUnes. You can click the Apple TV on the left side of iTunes and click restore--it will not take too long on a decent internet connection, and it will automatically install the software update (you have no choice on this, BTW, you can't go back to the previous software, as Apple only supplies the new software online (sadly). Your ATV 3 should work and you can put it back to your TV and re-enter all your info and enjoy the new features. But if you are like me, you won't enjoy AirPlay, something seems to be wrong with that if you use an iPhone or iPad and have updated to IOS7--not sure which is the problem, or both, but be prepared for a little more frustration, but at least your ATV 3 will "work" mostly as it did before.
I hope this helps, it is frustrating, but it is resolveable with a little bit of time--not that I'm happy about it, either.

The wi-fi on my ipod touch is connected but the internett is not working! Help

Soo annoying, it's connected but the internett is not working. I don't know what to type in or what to do, so I need help.

Are you 100% positive you are connected? Head to Settings - Wi-Fi and tap the > next to the network you are connected to? What is listed for an IP address? If it's in the 169.x.x.x range, it means your iPod did not properly receive a valid IP address via DHCP from your modem/router. So the 169.x.x.x address is a self-assigned one.
This can usually be resolved by a reboot of your router. You can do this by unplugging it for about 30 seconds. After it powers back up, try reconnecting it. It wouldn't hurt to try a reset of your iPod as well. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting suggestions.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

I get wireless connection but my internet does not work on my ipad 2

I get wireless connection but my internet does not work on my ipad 2

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Apple remote not working

My Apple remote is not working with my MacBook. The Mac OS X 10.5 Help Knowledge Base says to go to Security > Systems > and Disable remote control infrared receiver. I don't have a systems button or box nor the checkbox to Disable remote control infrared receiver. And, my MacBook has an infrared receiver.

Hi Focus,
I have the same problem. When I update from TIger to Leopard the front row apple remote still working. But is been a long time the last time i used and now on 10.5.2 osx the apple remote not working as I imagine.
I read some answers that help me understand better the problem. My check box of "disable remote.."is unchecked and I saw a "pair" button and try to pair with my apple remote. The tips told me to HOLD "menu" and "next" buttons of apple remote to pair him with computer. And Works fine. So I try to push only Menu button (as I've done so many times on tiger) but still does not working. So I realize the command to "start front row from apple remote" now on Leopard 10.5.2 is MENU+NEXT buttons and does not anymore only menu button. For me works like this.
While I write this answer I try again push and hold only MENU button and after almost 2 or 3 seconds holding button appears on screen an virtual image of my apple remote signaling to replace the battery, may be now will be works only on push menu, but I need to change the battery first.
I hope help somebody.

Why is my Apple ID not working in iTunes and App Store on my iPhone? Nothing happens if I click buy for apps or music. If I then go to settings/iTunes App Store my Apple ID is not there. If I then enter ID and password it does not save or link to account?

Why is my Apple ID not working in iTunes or App Store on my iPhone? When I try to buy apps or music it asks for Apple ID so I enter my info and nothing happens. When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account. I do not have this problem with iPad ID is stored and can be used in App Store and iTunes. I have just upgraded to 5c and it's still a problem.

LeesaHeeley wrote:
When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
Good luck.

My apple ID not working in Apple Store.

My apple ID not working in Apple Store, in iTunes work fine and with my iPhone work fine too but in my iMac only works in iTunes, App Store and iCloud say "Incorrect password or username", I reset my keychain with the same result. My OS is 10.7.4
In my iPhone I can acces to App Store, Itunes and iCloud but in my iMac only work in iTunes and online iCloud (icloud.com), the App Store and iCloud system say "Incorrect password or username" and never can loging.
My Apple ID its confirmed and I buy in iTunes perfect...
Please help, I have this problem for a long time...

This is quite strange, as MAS is really the same store as iTS. It's the same account.
This issue has to be something else going on with your system, and not at the Store's end.
How about make a new user account for testing. And see what happens when you try to use your Apple ID through there.

Apple tv not working

apple tv not working - message NO SIGNAL for this plasma. Was working before. Major difference a download from itunes 4 g movie yesterday. I have tried rebooting the apple device more than once. Switched off all plugs,checked all plug positions. Can anybody help please? Australia. Maggie.APple tv oroblem

Good morning Winston.
thanks.
i eventually found a one-liner in THE APPLE MANUAL which fixed it.
i.e. Resetting the APPLE TV. The instruction was to use the silver small operating APPLE device,
HOLD DOWN THE MENU BUTTON AT THE SAME TIME AS THE BLACK DOWN BUTTON UNTIL THE WHITE LIGHT ON THE APPLE TV STARTED BLINKING RAPID WHICH IT DID. I then released the pressure ON THE BUTTONS and within a few moments, the TV screen cleared and it started working again.
The interesting part is that I had thought a reset of the APPLE TV may have taken place when it was unplugged. BUT NO IT DID NOT.
Also, there was much helpful comment in the forums but not this simple solution which I found ON the WEBSITE APPLE MANUAL.
HOPE THE ABOVE IS CLEAR ENOUGH TO HELP OTHERS. Maggie 3/1/2015

Apple mail not working

apple is not working anymore after downloading an email. I get the apple wheel all the time. Force stop and open mail again gives always the apple wheel.

Use and methodically follow the troubleshooting steps in Apple's OS X Mail: Troubleshooting sending and receiving email messages located at http://support.apple.com/kb/ts3276

How can I make sure an url to connect to a webinar will not work in another browser?

How can I make sure an url to connect to a webinar will not work in another browser? The url is using a session cookie instead of username/password to authenticate the user and has the following form: /r5ygd62w5za/?session=breezrek22zu756wgzy8r&launcher=false&refresh_parent=true

Try the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint] add-on, it gives greater control over the zoom options.

Windows Server 2012 - Printing using UNC path not working

Hi,
I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
With
the web app I receive an error "The data area passed to a system call is tool small".
Also,
in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."

I have contacted IIS forum support.
Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
Their final response:
Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
works while the Samsung fails, as the HP one just "happens
to work",
http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
Similarly, System.Printing was designed just for WPF.
About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
to help you out. This is not a trivial scenario.

When I stream a movie via Apple TV from my iPad Air into my Samsung TV, I'm getting the "soap opera" effect. This only happens when I use Apple TV, not when I view a movie directly through a cable channel. Is there a way to eliminate this effect?

When I stream a movie via Apple TV from my iPad Air into my Samsung TV, I'm getting the "soap opera" effect. This only happens when I use Apple TV, not when I view a movie directly through a cable channel. Is there a way to eliminate this effect?

I'm having the same problem. It's not an issue with my TV, i've turned this feature off. I've tried playing with the ATV display settings but nothing works. When I stream netflix from my Samsung bluray player, I don't get the soap opera effect, but when I stream any video from the ATV, the soap opera effect is there. I'm thinking it's a choice that Apple made, but I really wish it could be turned off. Not a lot of people are searching for this, because it can be easy to overlook, but it's driving me nuts!

Connect As: Using Apple ID Not Working

Similar Messages

Maybe you are looking for