Connect behringer xenyx802 mixer to mac

What is the name of the product I need to connect this mixer (output like speaker jack) to the G5imac (usb)?
I need some kind of jack to usb cable, can you give me the name and suggest a decent brand?

Try posting your question in the Garage Band forum, there might be knowledgeable users there
http://discussions.apple.com/category.jspa?categoryID=127.
Good Luck,
Miriam

Similar Messages

  • I recently upgraded my iMac to 10.9.2 Nothing but problems since. Cannot connect reliably to a mixed pc/mac network at work, hangs at start up, hangs at shut down. Please help!

    Can anyone offer suggestions as to why since upgrading to Mavericks 10.9.2 I can no longer access a mixed pc/mac network? Previous to the upgrade, I did not have any problems. Other macs within my office can still access it, so I know it is not a network based issue. It exists in my machine only, and the other matching machine that exists in the office did NOT do the upgrade and has no problems. (Bummer for me)
    I have:
    Reset the PRAM
    Reset the SMC
    Turned off the network Wifi and rebooted, then turned it on again, still ridicously slow when I try and connect to shared pc server. I can connect to other macs though.
    Seems to alternate between a normal start up time, and a ridicously slow start up time with no apparent connecting reason as to why
    I have a shared HP Laser printer on the network that is working with other computers accessing it, perhaps this is the conflict? It is in Wifi mode, but the software is loaded on my computer. However, prior to the upgrade, I had no problems.
    My mail crashed shortly after installing 10.9.2, but I did finally get that up and running, but sometimes it loads and tells me that there is "No Mailbox Selected" in the initial opening Mail window. This is new, it never used to do that. I can select "Inbox" and see my mail, but I never used to need this step.
    When I try and access the shared network that has always worked previously, it now will not load the shared docs and folders, just sits there, and hangs. Sometimes it will load the folders after about 5 minutes, but will not allow me to open them.
    I do not run any virus protection software.
    Any ideas? I would be infinitely grateful for suggestions.

    Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
    If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
    http://www.etresoft.com/etrecheck

  • MacBook Pro Retina 2013 connecting to Presonus mixer

    I bought new MacBook Pro 13" late 2013 to use it with my mixer Presonus StudioLive 16.0.2
    http://www.presonus.com/products/StudioLive-16.0.2
    To connect computer Presonus has firewire S400 400mb/s connection.
    MacBook has no firewire connection, but has Thunderbolt to Firewire adapter.
    Before buying MacBook I checked if there is any issues connecting MacBook and Presonus and found none.
    http://www.presonus.com/news/press_releases/PreSonus-FireWire-Interfaces-Compati ble-with-Apple-Thunderbolt-Adapter
    Also I checked Presonus forum and everyone said that there is no problems.
    To connect adapter and mixer I have used cable that came with mixer and I also bought Belkin firewire 800/400 cable.
    Prsonus has program called Virtual StudioLive wich duplicates all mixers settings to computer.
    Now to my problem. Everything seemed to work at first.
    But then channel names just got lost in Virtual StudioLive time after time.
    Then I send some music from my MacBook through the mixer and I found that there is two pauses to the connection before the channel names get erased from computer.
    I also turned Virtual StudioLive off and these pauses still occured.
    Have anyone smarter than me any ideas how to sort this problem?
    Maybe the thunderbolt firewire adapter is not working propperly?
    Maybe it is a hardware problem in MacBook?
    Maybe it is a problem that my MacBook pro has Thunderbolt 2.0?

    Care to share which OS you are using?
    Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> 
    Change your router channel number.  Most times this works & is all you have to do. 
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.

  • Connecting MG3570 printer with multiple MAC books

    I connected MG3570 printer with my Mac book wirelessly. Everything fine till my son also connect the printer with his Mac book. My computer can not connect so I started set up again and connect it. Then my son can not connect again. What should we do to be able to connect all Mac books to printer? thanks

    You might want to look at this article on troubleshooting Mag Safe adaptors:
    http://support.apple.com/kb/TS1713
    Check for things like stuck pins.
    Also, be sure that you are not mixing up the MacBook charger (65 watts) with the MacBook Pro charger (85 watts). The MBP charger should be able to charge the MB, but not the other way around.
    If the charger is good and the battery and its connections are good, then it is possible that the Left I/O Board (which contains the power port) is bad.
    For the battery to charge, three things have to be working--the charger, the battery, and the Left I/O Board. If you have access to an Apple Store, the genius bar should be able to try a known good battery and a known good power adaptor and be able to pinpoint what is really at fault.
    Good luck!

  • Can I connect multiple displays using a mac mini

    Can I connect 2 displays using the mac mini? If so, are there any accessories that I need? Are there certain monitors or connections that I should use?

    Hello,
    Assuming this is a 2012 Mini...
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html
    If you need more...
    http://eshop.macsales.com/item/NewerTech/VIDU3HDMIDV/
    http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

  • I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

    I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?

    fighter19lisa wrote:
    that only makes it say its synced, when its not.
    No, it does not.  It transfers purchases from the iDevice to the computer.  The computer must be authorized for the Apple ID that the content was acquired with.
    fighter19lisa wrote:
    my playlists wont show up on the phone.
    Are they selected to sync?  Is Manually Manage content on the device selected?
    fighter19lisa wrote:
    i had to change my password for my aol account again and i still cannot get my email on my phone to even work
    What does that have to do with syncing content to the device?  FYI, nothing.

  • My ipad 3 is frozen on the plug into itunes page. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (there is no usb port on an ipad). If anyone could help it would be appreciated.

    My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.

    I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
    iPad User Guide for iOS 6
    iPad User Guide for iOS 7

  • How to connect my bass to my mac book

    What is the best way to connect my bass to my mac book pro, i want to record on garage band.

    raferg71 wrote:
    What is the best way to connect my bass to my mac book pro
    with an audio interface:
    http://www.bulletsandbones.com/GB/Interfaces.html

  • Can I connect my PS3 to my mac mini via HDMI ?

    Hello, I would like to know if I can connect my PS3 to my mac mini via HDMI ?
    I don't have a TV anymore so I really need to know if I can use my mac mini as one.

    Maybe this:
    http://eshop.macsales.com/item/Elgato/10025010/
    But you need OSX 10.7 or later
    and if you have Thrunderbolt connection on your Mini then this maybe:
    http://eshop.macsales.com/item/Blackmagic%20Design/BINTSTBEXT/
    You YOu my be able to Google and find another videi-in adopter for your Mini

  • Can I connect  my iMac to my mac mini??

    I have the new 27 inch imac with thunderbolt, and I want to connect it to my new mac mini in my media closet. I was windering if there is a way to do this. The purpose of my mac mini is strictly as a media server, and all of my work and media are done on my imac and stored on external storage devices in my media closet. I want to be able to share my media and applications directly with the mac mini. The only monitor I have for the mac mini is the iMac itself. Can I not run the mac mini on the iMac??

    you should be able to use the iMac's screen (27" model) with another computer, using DisplayPort.
    I'm not sure what you mean by "sharing applications", that's not usually possible.

  • Can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?

    can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?

    Investigate the Air Display App to see if it will do the job for you.

  • Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

    Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

    Look up "screen sharing" in help
    You can control your mini (which I am assuming you are hooking to your TV) complete from your iMac.
    After you set up screen sharing, you can go to the finder, under the "go" menu choose "Connect to server" and then browse.  Choose your mac mini's name, and look for the "Screen Sharing" button.
    Choose Apple menu > System Preferences, and then click Sharing.
    Select the Screen Sharing checkbox.
    To specify who can share your screen, select one of the following:
    All users:
    Select this if you want to allow any user with a user account on your computer to share your screen.
    Only these users:
    Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Users & Groups preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list, and then click Select.
    Click Computer Settings and set the following options:
    Anyone may request permission to control screen:
    Select this to allow anyone on your network to request to share your screen.
    VNC viewers may control screen with password:
    Select this and enter a password that VNC viewer applications can enter in order to control your screen.It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

  • Can I connect two monitors to a Mac Mini?

    Can I connect two Monitors to a mac mini

    Yes, but how depends on what model of Mini and what kind of monitors.  Early models only had one monitor port.  Later models had a Mini-DVI port and a Mini-Displayport.  Current models have a Mini-Displayport and a HDMI port.  The Mini-DVI and Mini-Displayport can attach VGA or DVI monitors, whereas the HDMI port can't use VGA monitors.
    Beyond that, you can get Matrox's DualHead2Go or a USB->VGA or USB->DVI adapter.  The Matrox product is a bit expensive and the USB adapters are a bit to slow for games and such.  So, again, the answer is "yes", but with limitations

  • My apple id attached to my itunes account has expired and i have forgotten the password that was attached to it! I have created a new apple id but cannot transfer it to my itunes which all my apple products connect up to on my mac?! HELP!

    My apple id attached to my itunes account has expired and i have forgotten the password that was attached to it! I have created a new apple id but cannot transfer it to my itunes which all my apple products connect up to on my mac with all my pictures etc on!?! HELP!

    My apple id attached to my itunes account has expired
    They don't expire. As far as anyone knows Apple IDs live on forever - if you forgot its password use https://iforgot.apple.com. Good luck with the answers to whatever security questions it asks.
    ... I have created a new apple id but cannot transfer it to my itunes which all my apple products connect up to on my mac with all my pictures etc on!?!
    Right! That's the reason you do not create a new Apple ID.
    As far as Apple is concerned a new Apple ID is a completely different user, with absolutely, positively no access to anything available to any other Apple ID.
    Concentrate your efforts on resetting the password to your old Apple ID. It has not expired, and is the only way to use all your existing iTunes purchases, App Store purchases, computer authorizations... etc. Forget about the new Apple ID you just created.

  • How can I create a new folder in an external disk that is connected via USB to my Mac?

    How can I create a new folder in an external disk that is connected via USB to my Mac?

    Just like you would create a new folder anywhere. Open the drive's icon from your desktop or the Finder, and click shift-command-N. (Or use the Finder menu if you prefer - File - New Folder).
    If you can't create a folder, your drive may be the wrong format (you can't write to a Windows/NTFS formatted drive, for example). You'll have to back up any files you have on there, and then use Disk Utility to reformat it to Mac Extended (if it will only be used on a Mac) or MS-DOS format (if you want to share it with a PC).
    Matt

Maybe you are looking for

  • Material Master - Sales Organization

    Hi, I am having two company codes, each with one Plant and Sorg respectively. Say 4211 ( BUKRS ) SC00 ( WERKS ) 4211 ( VKORG ) 3121 ( BUKRS ) MB50 ( WERKS ) 3121 ( VKORG ) When i am tyring to maintain a material master for SC00 Plant and 3121 Sales o

  • At Selection Screen in Module Pool

    Hi,    I am doing an Module pool which has 2 screens. First screen has a table control. When user double clicks any record in the table control I have to process further with value of the clicked record. Can anyone let me know how the At Line Selecti

  • Not able to connect to DB in Redhat Linux - intermittent wired problem

    Hi, I need some help from you if possible please help me. There is a wired problem in the Linux based Oracle server. OS: Redhat Linux 8 Database: Oracle Enterprise server 9.2 There is an intermittent wired problem. After some time (it happen twice la

  • Artifacting in Photoshop CS4

    Hi there, I just got a new computer. It's stats are the following: Dell XPS 8300i5 Processor: Intel Core i5-2320 CPU @ 3.00 GHz RAM: 8 gigs System type: 64 bit Graphics card: AMD Radeon HD 6450 I use a Cintiq 21UX. My problem: Weird, random artifacti

  • Problems with itunes while making a playlist?

    I'm making a playlist in itunes. At 36 songs I got a message from my computer saying itunes stopped working. It closed itunes. I reopened it. Nothing wrong. Kept adding to my new playlist. At the 50-60 song area itunes froze. Still is at this moment.