Connect BO to SAP-BW system without using SAP Intergation Kit.

Hi All,
How Could we connect and do reporting in BO from SAP system without installing SAP INTEGARTION KIT ??
Like we could read data from Oracle by simply creating a Oracle connection in Desiger and all the tables are visible at universe level.
Do we have any such metod where SAP INTEGRATION KIT NOT comes into picture. and we could either read SAP tables or cube at Designer level or at reportr level.
DO We have any Guide or document or way were we would not use SAP INETGRATION KIT .
Thanks !!

Hi,
Try this .. not sure i hope it will help
http://edocs.bea.com/wls/docs90/jdbc_drivers/oracle.html
http://support.businessobjects.com/documentation/product_guides/planningxir2/en/xir2_Oracle_Setup_Guide_for_BusinessObjects_Planning_11.20_en.pdf
Regards
Ashwin

Similar Messages

Will it damage my iPod if I connect it to a universal dock without using an insert?

Will it damage my iPod if I connect it to a universal dock without using an insert?

Fist
- See:
iPod touch: Hardware troubleshooting
- Try another cable.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
If damage
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the connector for less. Google for more.
Simple and Affordable iPod Repair Services and parts from iResQ

Is there any blog or examples to handle the errors without using ESB tool kit.

Hello,
I have been trying to work with error handling since last week but I dont understand how to construct the error message. Is there any blog or examples to explain handle the errors step by step from scratch without using ESB tool kit.Can anybody help me out.
Thanks in advance.

You can use option 3 to construct the error message inside orchestration.
Before using a BizTalk XML Message inside an orchestration, it must first be constructed. In fact this is just populating the message with XML. If there is an attempt to use this message before it is constructed, the above error will come. Some messages
come pre-constructed, such as messages that originate from a send port
There are several ways to construct a message inside an orchestration:
Create a new message from an existing message using BizTalk map
Assign one message to other(i.e. creating a copy of an existing message)
Creating a message with the help of a System.XML.XMLDocument variable
We have to first declare an orchestration variable of type XmlDocument. Then in a message assignment shape, we need to do something like this:
myxmlDoc = new XmlDocument();
myxmlDoc.LoadXML("<somexmlhere></somexmlhere>")
myMsgBeingConstructed = myxmlDoc;
Abhijit Mahato - Microsoft Community Contributor 2011 - MCTS BizTalk Server blog: http://abhijitmahato.wordpress.com/ Please "Mark as Answer" if Post has Answered the Question

CONNECT ORACLE11g database in sharepoint 2013 without using metaman or any third party tool

Hi!
I want to access ORACLE db and bring it as an external list in SharePoint 2013. How can it be achieved without using third party tools? So far i referred Creating
web service, .Net connectivity assembly or crafting the BCS xml model file manually are the techniques that can be employed to achieve. Can anyone share the code to create External content type and External list by adopting any one of the techniques.
Thanks in advance.

Hi,
To connect SharePoint to your Oracle Database, you should use the BCS.
You will find here what is the structure of the XML File to create to access your Oracle DB.
http://msdn.microsoft.com/en-us/library/office/ff464424(v=office.14).aspx
Once you finished your BDCM, you will be able to import it with the following mehod :
http://www.manula.com/manuals/lightning-tools/bcs-meta-man-for-windows/1/en/topic/importing-the-bdc-model-into-sharepoint
The last step will be to create your external list from your BDCM.
http://msdn.microsoft.com/en-us/library/office/ee558778(v=office.14).aspx
Best Regards,
Frederic
Please remember to click "Mark As Answer" if a post solves your problem or "Vote As Helpful" if it was useful.

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

How to connect my appication to the internet without using web server?

I'm doing my final project. It is an client/server application and using gprs as the carrier. But i have a problem in connecting the application to the internet!How to set its application IP?Do u have the example code?

hi
no you dont require to set any IP address
but make sure that you have proper GPRS connection, once you have that it will automatically set the IP address!!
if you are in india then there is two kind of GPRS service avail one is normal GPRS and other is Advance GPRS
in this case you have to have Advacne GPRS!!
[email protected]

How can I access the Server file system without using any signed applet?

Is it possible for me to run an applet on the client machine such that the client can view my server file system and perform uploading and downloading of files through the applet without signing the applet?

Add the following in your java.policy file, your plug in accesses.
grant {
permission java.permission.AllPermission;

I want to use Express to connect a printer to my network without using an ethernet cable.

Cannot connect Airport Express into Airport Extreme netwrok...it is within range, but amber flashes and it is not recognized.

Well I just added an Airport Express to my network without doing any of that. All I did was check to be sure my network was setup to be extended which it was. I plugged in the Express and it joined my network no problem.
Allan

Billing for Project Systems without using Sales Orders

Hello All,
We are using project systems in our project and we are not creating any sales orders for the same, however I am creating delivery using t-code CNSO and hence the outbound delivery is getting created, my question is can I create a billing document for this delivery and if yes how can I create the same.
Kind Regards
Atul

Hi,
Yes you can create billing document for this delivery
Make sure following pre requsites
In VOFA for your billing type assign document pricing procedure under account assignment/pricing tab
In XD02 for customer under sales area data >> Billing assign customer pricing procedure
And last in OVKK in combination of
sales organization + distribution channel + division + document pricing procedure + customer pricing procedure = Price procedure
kapil

How to Send One file to different Receiver Systems without using ESR Object

Hi Gurus
I have developed two interafces in my current project and they are both By pass scenarios. My requirement was to Send Data from MDM system to BW system. This development does not involve any ESR objects, By Pass sceanrio.
Now there is the requirement to Send one file or files from MDM system to different BW( two BW systems for different regions)
How can i accomplish this.
here we are not using any ESR Objects, so to maintain any condition in Receiver Determination is not possible.
Please let me know how to do this.
Tahnx in advance.

Hi Arjun,
If i understand your situation correctly, You need to define two separate Business Systems/Components in SLD for each BW system.
if you intend to send the file from MDM to both the BW systems, then you need to configure the following:
1. If you want to follow the classical approach (for this by-pass scenario):
a) Two receiver channels - One for each BW system
b) Two receiver agreements for each channel
c) One Receiver determination - with both the receiver systems added as receivers (w/o condition)
d) Two interface determination - Dummy mappings as it is a by-pass scenario
2. If yo want to go ahead with the Integrated Configuration (most preferred in this case):
a) Two receiver channels - One for each BW system
b) One Integrated Configuration Scenario (ICO) with both the receivers configured in Outbound Processing tab
Let us know if you were looking for something else (as your problem statement is not very clear)
Hope this helps.
Regards, Gaurav

How Can I connect to a Microsoft Access Database without using LiveCycle?

I have Acrobat Professional X. And I need to read a Microsoft Access Database. I don't have LiveCycle Form. Is there any way that I can connect to my database?

You are in the wrong forum, mate. This is a forum for ColdFusion.

How to populate the last empty row in Excel without using Report Generation Kit

I wrote a Labview SUb Vi that uses Report Generation Toolkit that is not loaded on the test stand. I am looking to convert it from Report Generation Vi like New Report, Append Table to Report, Dispose Report. The tunneling through all the report generation Vis seems extensive. Code is attached. Thanks, Greg
Greg

Thank you that was a big help...
I used the Excel Forum to get a lot of great ideas. My code is almost working.
There is a 2-D String Array that represents the String data that I am exporting to the Excel File Sheet 1 - 5.
I am attempting to determine the last populated row in sheet 1 then populate the next row of Sheet 1. Since all 5 sheets are populated every time, I should not have to search every sheet for the last row.
I am getting two row populated on sheet 1 with seeming the same data.
I found an AXExcelWrite2D ArrayWorksheet.vi that I thought would work. I think there is a Table determination that is causing me problems. The link is http://lavag.org/topic/13324-labview-and-excel-activex-or-ado/. The Application Invoke Node has a convert formula with "FromReferenceStyle" with R1C1 Attached to it. I am not sure what this function is doing. When I try to bring the function help up, there is a missing file.
I am including both the new active x vi and the report generation vi. Report Generation VI works.
I would appreciate any assistance I can get on this.
Thanks
Greg
Greg
Attachments:
REPU Test Data Population using Active X Write Save.vi ‏92 KB
REPU Test Data Population.vi ‏60 KB

Activating WebService on R/3 to connect a non-SAP system (XML)

Hi Experts,
Apologize if my thread is not on the right category. I'm not sure where to put this.
Is there any steps on how to activate webService to connect to a non-SAP system without using middleware like XI/PI. I'm trying to connect to a non-SAP system that sends an xml format message and then directly connect to an R/3 system. Is this possible? thanks!

Hi,
Check this link.
Web Services from Function Module
it might help u.
Thanks.

Is it possible to integrate LSO 600 with an external system without SAP PI?

Hi,
as asked in the title, i am wondering if it is possible to integrate LSO 600 with an external (non-SAP) system without using SAP PI/XI. The external system is a middleware application which can handle RFC functions, IDocs besides the usual web service communications.
However, i don't know how LSO and SAP PI are integrated so i wonder if their interfaces are such that instead of SAP PI another middleware could be used.

Web Services are used. If you were to implement the services in your 3rd party middleware and configure SAP to call it, I suppose it is possible. The external course catalog can be used for CourseEnrollment and LearningProgress. See the application help for details. Don't expect to receive support from SAP with such a setup however.

How to move the changes from one system to other without using CMS

Hi
In our project they are migrating NWDI 6.40 to NWDI 7.0.
During migration CMS won't be available.
Could you plesae tell what are the different options are there to move the WebDynpro changes from (NWDS) Development to Quality system and then production system without using CMS server?
If i will create a development package and import this packgae in Quality package will my new changes also be available in Quality server?
Thanks & Regards
Susmita

Hi Susmita
I wasn't completely sure, but from your description of your problem, it seemed like you would have access to your DTR during your upgrade. The following solution assumes as much. If this is not the case, you'll need to do things slightly differently, but the solution will still be possible.
Depending on the scope and size of your changes, it may be practical for your developers to deploy directly from their NetWeaver Developer Studio (or for a designated administrator to install the NWDS and do the same). To do so, from the Development Configurations perspective, create a new NWDS project for each of the DCs you want to deploy. Then right-click the project and choose from one of the deployment options. (Deploy new archive and run will allow you to see if your deployment has taken effect.) When deploying, the target server is the one set up as your J2EE engine in the NWDS properties - you'll consequently have to modify this when the target server for your deployment changes (from QA to production, or vice versa).
Note that this is only applicable in certain situations, and only as a short term stopgap measure. This sort of practice - developers or administrators deploying haphazardly to servers other than those intended for development - is precisely what the NWDI is designed to prevent (and is one of very few things it's fairly good at doing). For instance, if your QA and production systems are attached as TEST and PROD runtimes systems respectively in your NWDI, a full assembly and subsequent full deployment would usually occur to these servers when deploying with the NWDI. This is a much stronger guarantee of consistency than the build that will be performed within your local NWDS to deploy your changes. (Conversely, the rigidity of the assembly is perhaps the NWDI's greatest design flaw.)
(Also, Snehal: thanks for the information on the sapmake_util blog. It's not something I've encountered before and looks very useful.)
James

Connect BO to SAP-BW system without using SAP Intergation Kit.

Similar Messages

Maybe you are looking for