Connect BPCS with R/3
Hi,
does anybody have experience connecting BPCS (automotive supply industry) software with R/3 over XI?
A documentation or a link would be very helpful,
Regards,
Udo
Hi...
Can you please let us know how your Business Planning and Control Systems (BPCS) works?
So that any body can explain you how XI will integrates with R/3.
Thanks..
Similar Messages
-
URGENT: Connecting BPC 10.0 with BI4.0, with Universe Design Tool
Hi all,
I have quite an urgent question that I need some guidance from all you SAP gurus on!
Is it possible to connect BPC 10 to BI4 using Universe Design Tool? We are under the impression very few people have connected these pieces of software together, if at all. It is very important to a Project I am on at the moment as to whether it is possible so any advice would be very much appreciated.
So far we have done..
Software is installed - Universe Design Tool (UDT)
Logins have been created for BPC 10
Opened up UDT and go through the Wizard;
Connection name is BPC CCONNECTION
Select data access driver: Business Planning and Consolidation OLE DB for OLAP
Enter the server address for BPC 10 (This is the URL that we log in to the BPC Admin Console)
After we try to continue, we get the error as follows:
[Image of error|http://s9.postimage.org/pxk8raci7/UDT_Screen1.jpg]
If anyone could give any kind of advice I would really apprecaite it!
NickHi Nick,
If you are trying to connect BPC 10 NW to BI 4.0 then I have some suggestions. We did this in our SAP EPM 10 training. In the Admin go to the model tab , select your model and edit it. Select the check box Use as a source. This creates a transient query in the backend.. Then we designed the connection in IDT (Information Design tool). Login to IDT and create a new project. Now Right click on the project and create a new OLAP connection. Select SAP BICS as driver selection. Provide the server details and user aunthetication. Select specify a cube in connection option. Now You can select your model <MODELNAME>_B folder and u will see one query with /CPMB/TQ_XXXX. Test your connection and publish your connection to repository . Now you can use this connection for creating Interactive Analysis (Webi Report). I am not sure about the reporting client you wish to use.
Hope this Helps
Regards
Nikhil -
BPC 4.2 connectivity issues with server
Hello All, I have a user that is experiencing connectivity issues with our server. This appears to be at a client level and I would like to know how to correct it. We are currently using BPC 4.2 (service pack 2).
The problem occurred when they had IE8 uninstalled and installed IE6 today. This morning he had no issues connecting to BPC w/ IE8, but lost that connection when IE6 was installed. When working through the connection wizard, the following errors appear.
Here are the pop-up error messages they are receiving:
"The server name, or IP address (srvbpmarl01) is unreachable now. Please check the following:
1. LAN connection or Internet connection is working properly.
2. Server name or IP address is invalid
Detailed Error Message: Internet connection is not available"
"The system cannot download information from server: SRVBPMARL01.
There may be a network or security issue.
Error message: Your LAN connection or Internet connection is not working properly.
Detailed error message: Internet connection is not available."
I can't help but feel this issue is a result of the IE 8/6 complications, but I do not know which actions to take next.
Thanks for any help you could provide!I don't think the problem is related to IE.
It seems to be more a problem of configuration of IE.
I suggest to chec the follow:
1. Please make sure you are not using any proxy into connection of IE. Ot if you neede then make sure you will add your server into exceptions of proxy.
2. Try to connect with IE to server. use: http://nameofserver/osoft and also http://nameofserver.
If you received errors in both cases then it seems it is a problem with installaion of IE.
If you are able to connect and to display the default page for osoft then it must be a configuration problem.
I suppose MSDTC or Pivot table services is not correct.Try to use slow connection when you connect to server not High connection.
Regards
Sorin Radulescu -
Configuring JCo3 Connection Pool with single sign on on non SAP Java server
Hi Everyone,
i have configured a connection pool on JBoss as per JCo3 Documentation and is working great.
Now I need help to configure this connection pool with single sign on so that RFc on SAP ECC systems are executed using end users credential rather than using single user name password used to configure JCo connection pool.
On SAP Java stack I am sure its possible within Java WebDynpro and i assume using JCA resource adapter. But what if we don't want to use SAP Java App server.
Any help will be appreciated.
Thanks,
Divyakumar JainEason, 你好！
I have exactly the same problem. Did you find a solution to this problem? If so, please let me know! -
My iPhone 5 won't let me use my apps until I connect them with iTunes after downloading ios7. There's just a thing that pops up and says that in order to activate banners and push notifications I have to connect the app with iTunes. The thing won't go away no matter how many times I push ok, and it doesn't give me another option. Solutions?
Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck! -
I have a SharePoint 2013 environment with 1 AD Server, 1 DB Server and 1 APP Server, with 13 Web Applications running under the SharePoint.
Recently I rebuilted the application because of some infrasctrucutre problems, and I was able to solve all of them, except one. I can't connect to any of those 13 Web Apps with SharePoint Designer. When I try to connect, it always ask credentials, then it
seems like loading the site, then the error appears:
"An error occurred accessing your Microsoft SharePoint Foundation site files. Authors - if you are authoring against
a Web server, please contact the Webmaster for this server's Web site. WebMasters - please see the server's application event log for more details."
I've spent hours troubleshooting it, but none of the information I found was valid. I've already tried to clean the cache, but didn't work. I found plenty of related data of this
error with FrontPage and old versions of SharePoint, but nothing helped. All the Web Apps are SPD-Enabled at Site Collection Administration. I've tried connecting from many different PC's. The 15/LOGS folder doesn't get any data from this error, neither the
Event Viewer.
I really don't know what else to do. Please Help!I found the answer of my issue was in a .NET Agent installed by NewRelic on the server. I found a connection trouble with Fiddler, then I end up figuring this out:
This can be the result of Real User Monitoring so the first step in troubleshooting would be to disable it and see how it affects the application. The .Net Agent injects snippets of javascript into the header of pages sent to the users browser to measure the
page load time on the user's end.
You can disable RUM by editing newrelic.config and changing this line:
<browserMonitoring autoInstrument="true"/>
to this:
<browserMonitoring autoInstrument="false"/> -
Connection issues with Safari 3
I'm having some connection issues with Safari 3.
When I connect wirelessly, Safari won't load any web pages. I go and use Firefox and everything is just peachy.
I've reset Safari, emptied the cache and whatnot. I went in and checked the permissions, everything checks out.
When I connect with Ethernet, there's nothing wrong, which is my dilemma.
Help would be greatly appreciated.There are a number of posts in the Leopard forum from people with direct experience with upgrading from Panther to Leopard. Here is a relevant thread from there that should reassure you.:
http://discussions.apple.com/thread.jspa?threadID=1418714
Your system should be fine for Leopard, but you will probably need a current version of Photoshop if you don't already have it. See this download:
http://www.adobe.com/support/products/pdfs/leopardsupport.pdf
Also, Leopard doesn't run Classic (OS 9) apps.
One caveat - first make a bootable backup "clone" of your present system onto an external firewire drive so you can recover if anything goes wrong. You can use the "Restore" tab of Disk Utility to make such a clone, and there are also Panther-compatible versions of Carbon Copy Cloner (v 2.3) and SuperDuper (v 2.1.4), both excellent for this.
It's even possible to a create second Panther clone on a different external volume to create a "dual-boot" system, using that volume to continue to run old applications that you can't run with Leopard. -
I had bad connection issues with my mobile device, so i pressed reset on my EA4500 router, and now when i connect to my network, it gives my limited connection even though i have 5 bars of signal. Not sure what to do now...
Resetting the router will erase all the settings you configured on the router since the initial setup. You manually configure the router's wireless settings so your wireless devices can have internet access again.
Procedure: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cfb50c0dc992443ab2405a782cca60f7_19073.xml&pid=80&...
Make sure to use a computer that is hardwired via Ethernet cable to the router.
For bad connection issues: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cf6ed888ce144d06905af4987887fd1b_KBxxxx_EN_v1.xml&... -
hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
-
CR2008 connectivity issue with BOE Universes(sap and non sap universes)
Hi Experts !!
Recently we tried to build/connect to a Universe in Crystal Reports2008 via 'Make a new connection tab'.
The universes are of SAP BW or non SAP Lying in BOE Servers and we are trying to build reports on them by conncting/utilizing the universes as a database for Crystal Reporting.
Our issue is most of the time we are not able to connect to the Universes and the connectivity blows out by some 'communication Error' thing initially.
While at some other points in time, the connectivity takes us to the Universe and we are able to select few characteristics and key figures from the Universe but the moment we go futher and try to run by pressing 'OK' button it blows out and say' LOGON FAILED'.
Apparantly, it is an connectivity issue with BOE server and from the different blogs it looks like it is a known issue for long.
The proposed issue resolution were like either CR2008 should be SP2 with BOE SP3 or there should be some additional .dll files defined in the paths in case of MSSQL database. None of this applies to us as we are on CR2008 with SP3 and going back to SP2 is probably not a viable option for us, and we are using Oracle as underlying database in this specific case.( i would like to tell you here that we are able to connect to Oracle Database directly though).
We have raised a message with SAP and was just wondering if we do have some solution/workaround already available to this known issue in place please?
Thanks&Regards.
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:41 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:44 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 3:14 PMHi Amit,
Moved to Universe Forum.
If you have a case logged then no point posting here also, this is a public site and not a case management tool.
Once you do get the solution from your case please post it here also to help others if they have the same problem.
Thank you
Don -
Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!
If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.
-
Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??
I misunderstood what Time Capsule is and had hoped for a wireless backup device that didn't have to be connected to the router.
The TC is a wireless backup device.. it does not need to be connected to the main router..
The problem is the computer.. not the TC.. the computer has only one wireless card.. if your current internet is by wireless.. then you must choose.. internet or backup.
But my other suggestion will work.. get a wireless USB stick compatible with Mac OS.. there are plenty and cheap.. since you are in the same room as the TC they will work fine.. plug it in and load the driver.. taint hard.
You should do the first backup by ethernet though.. wireless is too slow.. once you have that, you will do fine.
Search ebay for wireless n usb.. Mac compatible..
http://www.ebay.com/itm/New-EDUP-Mini-Wireless-11N-300M-USB-LAN-Card-WiFi-Adapte r-Nano-Card-Soft-AP-/150864362939?pt=US_USB_Wi_Fi_Adapters_Dongles&hash=item2320 377dbb#ht_3553wt_1165
As you can see.. they are getting smaller and neater.
I have no idea if it works .. haven't tried one.. but I have used USB wireless stick on the Mac to overcome this issue.
You will need to set static IP .. not hard but you need to set specifics if you do buy one post again for the setup. -
How can I play music on my macbook pro (OSX Lion) through a Pioneer receiver? I've connected them with a mini display port to HDMI cable with audio support bought at the Apple Store, but there's no sound coming through. There are 4 HDMI-in ports on the receiver - BD, DVD, DVR/BDR and audio. In my system preferences for sound, the receiver doesn't show up as an output option. Can anyone please advise. (ps, this is my first time posting a question, so I hope I can find your answers!) thanks, JP downunder
For sound, try the audio output port and connecting to the RCA audio input ports on your Pioneer receiver. Use something like this:
http://eshop.macsales.com/item/OWC/PODCONNECTOR/
Ciao. -
Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks
I did not say it is not possible.
I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
Maybe you can get on the Internet over Ethernet.
You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac). -
I just got an iPhone 4s, and I can not connect it with my iTunes from my previous account. I have already tried making another account, however it says that I have the wrong security code even though this is not true. What should I do?
Contact iTunes support. There's a link to it on the bottom of every page in the iTunes store.
Maybe you are looking for
-
USE OF ZERO AND BLANK CELLS IN CALCS
Hello Everybody, I'm making a new script logic that acumulates the values month by month, it means that february=januaryfebruary, march=januaryfeb+mar, etc. Everything was workin fine, until i had some values in blank in few months, in those cases th
-
How to setup facetime on my macbookpro
how to setup facetime on my macbook pro
-
IWeb '09 / Mobileme Gallery Widget / No Albums or Movies / Snow Leopard
This is my first time trying to use the Mobileme Gallery Widget in iWeb '09 and all I can get it to do is tell me "No Albums or Movies". I have non password / no hidden galleries published via iPhoto '09 and iMovie '09. I even tried publishing via me
-
Safari needs to click submit button twice when file uploading
Hi all, I'm using Safari 4.0.5 and developing the html (no AJAX, but plain PHP posting) form with the file uploading on my local environment. I tested it fast and thick several times, then suddenly Safari stopped to upload the jpeg file, indicating l
-
HT1766 Why does my 4S think its in the U.S for AppStore downloads/updates?
4S keeps telling me I have to switch to Canadian store to update or download Apps? I'm on Hamilton Ont??