Connect BW to external system

Hello Experts,
We have data in Essbase system...is there a way to connect it to the BW system ?? is DB connect the way to go ??
Thanks
Asha

Hi
I guess is it related with Hyperion.
Regards
Manga

Similar Messages

  • Connecting of an external system by IDOC adapter

    Hello everybody,
    we want to connect an external (storage) system to XI by IDOC-Adapter.
    In a scenario without XI the R/3 backend triggers the external system by RFC-Call (TCPIP-conncetion) and an program on the external system is called. This program executes an RFC-call on the R/3 to get the IDOC-informations.
    IN the new scenario (with XI) the R/3 Backend sends the IDOC information to XI. The XI routes this to external system. An TCPIP-Connection is needed which calls the program from the external system.
    But how should this work? The program can not (or should not) call the R/3 Backend directly but the XI.
    What has to be done now? Has the program of the external system changed so that it can understand IDOC-structure directly?
    Or do I have to implement a business process scenario to guarantee that the external system reads the IDOC data in XI (similar to "old" scenario?
    Thanks a lot!

    HI everybody,
    thank you very much for your help. Now it es possible to send an IDOC from R/3 Backend and IDOC-Adapter via XI to an external system using the IDOC-Adapter.
    But now the external system wants to send IDOCs back. So the communication is realised by using the IDOC-Adapter again. In this case we do not get the messages in XI. The conncection is ok (we see this in the Gateway), but the system gets an error in IDOC adapter (sys-log):
    <b><b>Transaktions-Abbruch IDOC_ADAPTER 151 ( LFS 910 )</b></b>LFS = external system (AS400).
    In the RFC-Trace we find following information:
    <b> **** Tra
    Transaktions-Abbruch IDOC_ADAPTER 151 ( LFS 910 )ce file opened at 20060223 111414 W. Europe Stand, SAP-REL 640,0,109 RFC
    ======> Der Funktionsbaustein "EDI_FILL_SYIDOC01_FOR_RFC" ist nicht vorhanden
    ABAP Programm: SAPLIDX1 (Transaction: )
    Called function module: EDI_FILL_SYIDOC01_FOR_RFC
    User: RFC_USER (Client: 910)
    Destination: C01 (handle: 3, , {C322581B-EB47-43E7-87D7-4607C2873828})
    SERVER> RFC Server Session (handle: 1, 95896538, {43FD899F-8993-0202-E100-00000A
    SERVER> Caller host: LHMAS40A.INTRANET.SYS
    SERVER> Caller transaction code:  (Caller Program: SAPCPIC)
    SERVER> Called function module: ARFC_DEST_SHIP</b>
    Can anybody help us?
    Thanks a lot!
    Florian

  • Connection between portal (KM system) and external server.

    Hello All,
    I need to establish connection between portal (KM system) and external server. At external server, IIS and WebDAV are configured.
    So for this reason, I have created an HTTP system and a webDAV repository manager at portal, but not able to connect to the external system.
    I have created a webDAV template, but not able see it under KM systems to create a webDAV system, I have even restarted the portal, still no use
    Please suggest, any prerequisites need to be done?
    Thanks
    sk

    Hello Supraja.
    Yes, ofcourse i already followed the doc.... In the 20th page of the doc, it is said the portal needs to be started, for the WebDAV template to be seen. to go head and creat a WebDAV system under KM systems.
    But even after restarting the portal, I cant find the already created WebDAV template. Any guess to reslove it...
    A quick response it appreciated.
    regards-
    sk

  • FTP file on Appserver to an external system from ABAP

    Hi,
    I am trying to FTP a file that my program writes to the APPSERVER directory. I used FTP_CONNECT, FTP_COMMAND and FTP_DISCONNECT.
    I am able to connect to the external system and change to the directory where I have to write the file using cd. The problem arises when I use lcd command to switch the local directory. Although, i specify the path, lcd /usr/sap/icomm/iface/outbound/, on execution of this command, the system points to my C:\Documents and Settings\rkademani\SapWorkDir.
    How can I make it point to my appserver?
    Further, this program will be scheduled as a background job in Production. I have tried to schedule this as a background job, even then it gives me the same error.
    Please help. Thanks in advance.
    RK

    What error do you get?  When I hit "test" I see:
                              Connection test SAPFTPA 
    Connection type:    TCP/IP connection            
    Logon:                    155  msec              
       0  KB:                    1  msec              
      10  KB:                   15  msec              
      20  KB:                    2  msec              
      30  KB:                    3  msec             
    The only visible settings are "Activation type = Start on Application Server, and the Program = sapftp... in the RFCDES table in SE16, I see:
    Destination                      Type Options                                                                               
    SAPFTP                           T    H=%%SAPGUI%%,N=sapftp,R=N,     
    SAPFTPA                          T    N=sapftp,R=N,                 
    Jonathan

  • FTP to external system

    Hi,
    I am try to establish a connection to the external system. I am using the FM "FTP_CONNECT" for connection in my ABAP program. But somehow I am not able to connect.
    I am getting an error message saying "Attempting to connect to (HOSTname) fail".
    I have checked user authorization and it seems everything is fine.
    Do I need to pass gateway parameters in this FM as this is the external system (They are optional)? Currently I am not passing anything in all three gateway information.
    CALL FUNCTION 'FTP_CONNECT'
         EXPORTING USER = USER
                   PWD = PASSWORD
                   ACCT = ACCOUNT HOST = HOST
                   TRACE = FTP_TRACE
                   GUSER = ''
                   GPWD = ''
                   GHOST = ''
         IMPORTING HANDLE = HANDLE
                   ERROR = CERROR
         EXCEPTIONS SYSTEM_FAILURE = 1
                    COMMUNICATION_FAILURE = 2.
    Appreciate your early response.
    Thanks,
    Samay

    Hi Samay,
    You need to setup RFC Destination (SM59). If you don't have authorization, please ask BASIS to help you. Otherwise please follow this steps.
    When you define an RFC server program (usually an executable on a server) as RFC destination, you choose either 'START' or 'Registration'. 'Start' means the SAP application sending anything to this destination will trigger this program, while registration means this program will already be running (like a service) and have already registered itself to SAP server.
    Once you have defined your RFC destination as of type 'registration', you should execute this exe with the syntax
    "pgmname.exe -a<ProgramID>
    -g<Gateway Host>
    -x<Gateway Service>
    " where programID shall be the same as the RFC destination name (I think) and gateway host and service is from the app server where you are registering this destination,
    to have it started as a service and registered as the destination to the SAP server (which you can afterwards see in SMGW txn).
    If you want this program to be started when something is sent to this RFC destination from SAP, make it of type 'START'.
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Office 365 ECT to Azure Cannot connect to the LobSystem (External System)

    I've tried to set up External Content Types to an Azure SQL database but when I access my page I get an error.
    I basically followed http://www.pointbeyond.com/2012/12/31/surfacing-data-from-sql-azure-in-sharepoint-2013-online-office-365
    Can you help me work out what i've not done, I don't know where to configure Azure firewall as this message suggests. The error is below:
    Cannot connect to the LobSystem (External System). Reason: 'Cannot open server 'uf7prto4sj' requested by the login. Client with IP address '157.55.225.241' is not allowed to access the server. To enable access, use the Windows Azure Management
    Portal or run sp_set_firewall_rule on the master database to create a firewall rule for this IP address or address range. It may take up to five minutes for this change to take effect. Login failed for user '*REMOVED*'. This session has been assigned a tracing
    ID of '9389a67c-dc78-4134-9167-545ec963be3a'. Provide this tracing ID to customer support when you need assistance.'
    Correlation ID:9a3fb39c-d0ea-1000-8099-2fad02009a01

    Hi,
    It depends, if it's a static IP address for your machine, it should be OK for this one IP address; if it is a dynamic IP address in a range, you can input the IP address range which contains this mentioned IP address
    157.55.225.241, or update the changed address to date.
    http://stackoverflow.com/questions/8543653/windows-azure-client-with-ip-address-xxx-xxx-xxx-xx-is-not-allowed-to-access-t
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you
    have feedback for TechNet Subscriber Support, contact [email protected] 
    Daniel Yang
    TechNet Community Support

  • Error while connecting to external system in SM59 with ICM_HTTP_SSL_ERROR

    Hi all,
    we have configured an SM59 RFC destination of G type which pings to the external third party server. Before testing we have uploaded the external server certificate in PI system. it was working fine with * HTTP 200 OK* message. since 2 days we are facing the ICM_HTTP_SSL_ERROR while testing the connection. when we telnet from PI to the external system using the port no.443, its getting connected.
    so any idea why it started giving the error.
    We have check out this forums but of no help.
    [ICM_HTTP_SSL_ERROR|ICM_HTTP_SSL_ERROR;
    The trace file dev_icm says
    [Thr 52] Thu Jan 20 14:34:00 2011
    [Thr 52] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_CONNECTION_LOST
    [Thr 52]    session uses PSE file "/usr/sap/XD1/DVEBMGS00/sec/SAPSSLDRV.pse"
    [Thr 52] No Secude Error present in trace stack!
    [Thr 52]   SSL_get_state() returned 0x00002141 "SSLv3 read server key exchange B"
    [Thr 52]   SSL NI-sock: local=192.168.127.70:65243  peer=80.78.2.187:443
    [Thr 52] <<- ERROR: SapSSLSessionStart(sssl_hdl=6000000000d50fd0)==SSSLERR_SSL_CONNECT
    [Thr 52] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00370a03} [icxxconn_mt.c 1957]
    [Thr 81] Thu Jan 20 14:34:15 2011
    [Thr 81] IcmWorkerThread: end worker thread 53
    [Thr 80] Thu Jan 20 14:44:45 2011
    [Thr 80] IcmWorkerThread: end worker thread 52
    Thanks,
    Asem

    Hareen,
    We checked the the note 1318906 and followed the steps but error persists.
    Could you please advice more on this.
    Rahul,
    The note you mentioned is for different error "ICM_HTTP_INTERNAL_ERROR".
    Br
    Asem

  • Connection with external System using AS2/SFTP adapter.

    Hi All,
    I need to use SFTP/AS2 to connect to an external Server which is not in our landscape.
    Can anybody could help whether i need to create a party on the Sender side as sender system is an external Server.
    I have gone through many docs but i am not clear when to use party and when not..?
    Regards,
    Rahul

    Hi Rahul
    Whether to use a party or not is both an architectural question as well as a development question.
    Architecturally, if an external server is not in your landscape and belongs to a different company/entity, your scenario would be a B2B process. You can refer to the below link for more details about B2B, but I've included a short snippet below too.
    http://help.sap.com/saphelp_nwpi711/helpdata/en/48/c7a475da5e31ebe10000000a42189b/content.htm
    Using a communication party, you address a company that is involved in a B2B process.
    The (technical) name of the communication party (for example Bosch) is the identifier for the company within an Integration Directory. To be able to identify the company during any external communication using a globally unique ID, you specify alternative identifiers for a communication party. For external communication, the name of the communication party that is known internally is mapped to the ID. A particular identifier is specified in the communication channel (see below).
    In terms of development, not all adapters (FTP, SFTP, SOAP, etc) require the use of a party object when you develop a B2B integration scenario. There are companies which have implemented all B2B scenarios using those adapters in an A2A style (using just Business Systems.)
    As Harish has mentioned, if you use the Seeburger AS2 adapter, you will need the party object (AS2ID is configured there), but if you use the SFTP adapter, it is optional.
    For your case, I'd recommend going with Party to clear distinguish that it is a B2B process.
    Rgds
    Eng Swee

  • Connecting external systems via JMS

    Hello there!
    I have this ATG MessageSink component connected on a sqldms queue named /integration/CustomerQueue, what is the best approach for connecting external system (like a standalone .jar) on ATG sqldms Messaging System, to post a message on this sqldms queue?
    <message-sink>
         <nucleus-name>
              /integration/jms/sink/CustomerMessageSink
         </nucleus-name>
         <input-port>
              <input-destination>
                   <provider-name>
                        sqldms
                   </provider-name>
                   <destination-name>
                        sqldms:/integration/CustomerQueue
                   </destination-name>
                   <destination-type>
                        Queue
                   </destination-type>
              </input-destination>
         </input-port>
    </message-sink>
    Thanks!

    Resolved.
    I just created a ConnectionFactory and a Queue on Weblogic, than I created a JMSProvider on ATG and registered on dynamoMessagingSystem.xml:
    Create a JNDI Reference for the ConnectionFactory created on WLS: /atg/dynamo/messaging/WeblogicJMSProvider
    $class=atg.nucleus.JNDIReference
    JNDIName=jms.ConnectionFactory
    Register a Provider on: /atg/dynamo/messaging/dynamoMessagingSystem.xml
    <!-- ============================================================== -->
    <!-- ====================WEBLOGIC PROVIDER========================= -->
    <!-- ============================================================== -->
    <provider>
      <provider-name>
        weblogic
      </provider-name>
      <topic-connection-factory-name>
        dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
      </topic-connection-factory-name>
      <queue-connection-factory-name>
        dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
      </queue-connection-factory-name>
      <xa-topic-connection-factory-name>
        dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
      </xa-topic-connection-factory-name>
      <xa-queue-connection-factory-name>
        dynamo:/atg/dynamo/messaging/WeblogicJMSProvider
      </xa-queue-connection-factory-name>
      <supports-transactions>
        true
      </supports-transactions>
      <supports-xa-transactions>
        false
      </supports-xa-transactions>
    </provider>
    And finally create a MessageSink or MessageSource pointing the provider-name for weblogic
    <message-sink>
      <nucleus-name>
      /integration/jms/sink/CustomerMessageSink
      </nucleus-name>
      <input-port>
      <input-destination>
      <provider-name>
      weblogic
      </provider-name>
      <destination-name>
      Integrations.CustomerQueue
      </destination-name>
      <destination-type>
      Queue
      </destination-type>
      </input-destination>
      </input-port>
    </message-sink>

  • Step by Step how we can connect SAP CRM to External system..

    Hi Experts,
    I want to know the informations of how we can connect sap CRM to External system, and what are the settings we have to do ,to enable XIF adapter..
    This is very imp requirement kindly give support.., how we can connect to other system..through XIF Adapter..??
    IS it possible to create ZBAPI in SAP CRM..?
    Thankz in Advance
    Regards
    J Sarathi

    Hi,
    - Xif adapters and service process the BDOC messages.
    - adapters for inbound and outbounfd processing.
    -it will forward the messages from  the inbound queues to the control component.
    -BDOC is a business document where the flow of data to and from the CRM system takes place.
    -Bdoc is a container that contain business data
    - it describes the hierarchial structure of the business data.
    -you can also create custom specific BDOC types,
    -BDOC's as a data container to process business objects as one unit and this avoid having to transport several individual tables.
    Bdoc types are found in BDOC repositry.
    Bdoc types have two part
    Header- consist of one single segment so-caooed control segment
    Body - consist of one or more data segment
    Idoc having three types of data:
    control record
    Data record
    status record
    hope it will useful.
    thanks
    Hemant ghiya

  • DB Connect, BW on MSSQL, Oracle as external system(NON SAP)

    Hi,
    Requirement:
    I want to connect and Extract data from Oracle database (non-sap).
    BI System Details:
    1. BI 7.0 (EHP 1) server is running on MSSQL 2005.
    2. I have WEB AS as ABAP only.
    3. Operating system Win 2003 server.
    Oracle Database (NON SAP) Details:
    1. OS : Win 2003
    2. Oracle 10g Release 2
    Activity:
    1. I have downloaded, unpacked and copied the Database Shared Library (DBSL) as mentioned on sap help link http://help.sap.com/saphelp_nw04s/helpdata/en/42/fdccb72aa95277e10000000a1553f7/frameset.htm
    2. I have installed the oracle 8i client on BW server and configured the tnsnames.ora file. I am able to ping(tnsping sap.world) the oracle database through command prompt(cmd).
    3. RSA1 -> Source system -> DB Connect.
    4. Right Click on DB Connect -> Create.
    5. Entered following entries in screen: Create Source System
    Logical System Name : Oracon
    Source System Name  : Oracle Connection
    6. Click on Enter icon.
    7. I make the following entries in the screen "Description Of Database Connections"
    DB Connection  : Oracon
    DBMS : ORA
    User Name : username of oracle database with admin right
    DB password : database password
    Conn. info : sap.world
    Permanent : unticked
    Connection Limit: empty
    Optimum Conns : empty
    8. Click on SAVE Button
    9. Click on Back Button and again click on Back Button
    10. Now i got the Dialog box "Cannot Access Source System ORACON" with three button.
    System Log
    Correct
    Cancel
    11. I clicked on System Log and checked the log.
    12. I am getting the following error
    No shared library found for the database with ID ORACON
    Documentation for system log message BY G :
    As well as the standard connection, an attempt was made to set up
    another database connection, under the specified ID. The Shared Library
    for this second database could not be found.
    The Shared Library is usually found in the  Executable
    directory (profile parameter DIR_LIBRARY) under the name dbs
    <dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
    stands for the operating system-specific extension of the Shared
    Libraries.
    The database type is determined from the entry that corresponds to the
    specified DB ID in the table DBDCON. Check whether the data in this
    entry is correct.
    Please Help me to rectify the error.
    Regards,
    Aslam Khan

    Hi,
    and thanks for the answers.
    Now I have the oracle client installed on the BW server, and the dbsoraslib library has been copied to the BW run directory. But any attempt to connect to the system just gives me the error "No shared library found for the database with ID AGRESSO"
    (I get ths error no matter what I input when trying to set up the connection, also if I intentionally gives wrong ID and/or IP)
    I'm wondering if my input is the problem, and then, what would be correct.
    My tnsnames.ora looks like this
    AGRESSO =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = xxx.xxx.xxx.xxx)(Port = 1521))
          (ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = xxx.xxx.xxx.xxx))(Port = 1521))
        (CONNECT_DATA =
          (SID = db06)
    (edited out ip adress)
    When creating the connection I give
    Logical system name "AGRESSO",
    source system name I assume I can give whatever here.
    Type and release I leave blank.
    Next screen I give:
    DB Connection: AGRESSO (Can not be edited)
    DBMS: ORA
    Username/passord as given by the server admin
    Conn. info I have tried many different inputs. AGRESSO, the IP adress, the SID (db06), but no luck.
    Anyone have any knowledge about what to give as input? (if the tnsnames.ora is lacking information etc)
    Thanks for any input.
    Regards,
    Øystein

  • HTTP connection from OSB web service to external system via a Proxy Server

    Dear experts,
    May I know has anyone tried to use HTTP protocol to send a request from OSB web service to external system via a proxy server? Heard that we need to establish some sort of tunnel (socket) to talk to Proxy Server. Can you please any have sample code or configuration steps to share?
    Thank you very much!!

    http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#wp1137294
    Adding Proxy Servers
    Use the Summary of Proxy Servers page to add and configure Proxy Server resources and make them available in Oracle Service Bus as a system resource. You must be in an active session to configure or reconfigure Proxy Server resources.
    1. If you have not already done so, click Create to create a new session or click Edit to enter an existing session. See Using the Change Center.
    2. Select System Administration > Proxy Servers.
    3. Click Add.
    4. In the Name field, enter a name for the Proxy Server resource. This is a required field.
    5. In the Description field, enter a short description for the Proxy Server resource.
    6. In the Host-Port Parameters section, enter the following information:
    1. In the Server Host field, enter the host name or IP address of the Proxy Server. This is a required field.
    The Server Host name for the Oracle Service Bus proxy server must be identical to the server host name of the actual proxy server.
    2. In the Clear Text Port field, enter the Proxy Server clear-text port number.
    3. In the SSL Port field, enter the Proxy Server SSL port number. You must enter either a clear text or SSL port number.
    4. Click Add.
    You can configure multiple Proxy Servers for each Proxy Server resource. This enables Oracle Service Bus to perform load balancing and offer fault tolerance features for the Proxy Server resource.
    7. If the Proxy Server performs proxy authentication, enter a user name in the User Name field, and the associated password in the Password and Confirm Password fields.
    These fields are optional, and required only if the Proxy Server is secured.
    8. Click Save to create and save the Proxy Server resource in the current session.
    9. To end the session and deploy the configuration to the run time, click Activate under Change Center.

  • How can I connect an old external FDD Model# M0130 ?

    I have an original Macintosh 128k with an external FDD DB-19 connection. Now I have 400k diskettes and I would like to get the files from these diskettes. Is there a way to connect this old External FDD that has an db-19 connection to a Quadra 650 or Powerpc 7600 so that I can get the files from the diskettes.
    Or is there another way to be able to access these 400k diskettes from a Quadra 650 or PowerPc 7600.

    400 KB diskettes are physically readable in any Apple 800 KB or combination 800KB/1.44 MB diskette drive. 400 KB diskettes are double density (2D or 2DD) media, but are written one one side only.
    Support for 400 KB MFS diskettes was removed from the System Software at System 8.0, when HFS+ Extended was first introduced (but not made active until 8.1).
    So you need an older Mac, like your Quadra 650, running Mac OS before Mac OS 8.
    Do not try to fool the drive by using HD media -- the oxide is different, and the data will decay and become unreadable in a matter of a few minutes. Both types of diskettes are still available from the catalogs of major office supply retailers.

  • Calling a web service in external system from SRM

    Hi folks,
    A web service is created in the external system and I need to access this web service from a BADI. Can you tell me how can I call this web service (the external system is giving me a URL) and how I'll get a return. Please let me know in detail.
    Thanks,
    Prem

    Prem,
    Hi. You can call the service via HTTP protocol. Pass them values (SET_DATA), and receive a response (GET_DATA), via xml/html.
    In your code you would need to create the xml data to pass them, and evaluate the returned xml.
    Process...
    Data setup
    1) Create the XML to send them
    Working with the external service
    2) Open the HTTP connection
    2a) cl_http_client=>create_by_url (IF_HTTP_CLIENT)
    2b) lr_client->authenticate
    3) Call the to send them the XML
    3a) lr_client->request->set_data
    3b) lr_client->send
    4) Call the lr_client->receive to return the response
    5) Close the connection lr_client->close
    Data evaluate
    6) Evaluation the returned XML and process.
    Hope this helps
    Cheers
    Rob
    Code example below.. (There are loads of SAP examples depending on which release you are on).
    Process the call to the HTTP client - logic copied from RSHTML01     *
    Open IF_HTTP_CLIENT
      call method cl_http_client=>create_by_url
        exporting
          url                = l_url
        importing
          client             = lr_client
        exceptions
          argument_not_found = 1
          plugin_not_active  = 2
          internal_error     = 3
          others             = 4.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                   with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
          raising oops.
      endif.
    Authenticate the user
      if not g_int_type-usr is initial.
        move: g_int_type-usr      to l_user,
              g_int_type-password to l_password.
        call method lr_client->authenticate
          exporting
            username = l_user
            password = l_password.
      endif.
    Allow for Cookies
      lr_client->propertytype_accept_cookie = lr_client->co_enabled.
    Set the server protocol
      select single gsval into l_server_protocol
        from z77s0
          where grpid = c_grpid
          and   semid = c_server_protocol.
      if sy-subrc eq 0
      and not l_server_protocol is initial.
        move l_server_protocol to l_st_server_protocol.
        call method lr_client->request->set_header_field
          exporting
            name  = '~server_protocol'
            value = l_st_server_protocol.
      endif.
      Send out the XML
      Set body to XML data
        lr_client->request->set_data( g_xxml ).
        save_xml( i_role = cl_xml_document=>c_role_oreq ).
        l_request_length = xstrlen( g_xxml ).
      If Data is sent through then we need certain flags set
        lr_client->request->set_header_field(
                                   name = 'Content-Type'
                                   value = zcl_tem_bsp=>c_xml_content ).
        call method lr_client->request->set_header_field
          exporting
            name  = '~request_method'
            value = 'POST'.
      Set length of string to the header fields
        if not l_request_length is initial.
          move l_request_length to l_st_request_length.
          lr_client->request->set_header_field(
                                    name = 'content-length'
                                    value = l_st_request_length ).
        endif.
      Send the request
        call method lr_client->send
          exceptions
            http_communication_failure = 1
            http_invalid_state         = 2
            http_processing_failed     = 3
            http_invalid_timeout       = 4
            others                     = 5.
        check_for_error 'Send'.
      Receive the response
        call method lr_client->receive
          exceptions
            http_communication_failure = 1
            http_invalid_state         = 2
            http_processing_failed     = 3
            others                     = 4.
        check_for_error 'Receive'.
      Determined returned XML or HTML
        g_xxml = lr_client->response->get_data(  ).
      Determine the header fields for failure validation
        if lr_client->response->get_header_field( '~status_code' )
              between 200 and 299.
          save_xml( i_role = cl_xml_document=>c_role_ires ).
        else.
          l_status_code =
            lr_client->response->get_header_field( '~status_code' ).
          l_descript_1 =
            lr_client->response->get_header_field( 'error' ).
          l_descript_2 =
            lr_client->response->get_header_field( 'errortext' ).

  • I want to use the Thunderbolt connection for an external hard drive

    I want to use the Thunderbolt connection for an external hard drive - so what port would I use on the MacBook Pro 13" for the display monitor.  Thank you!

    This is not the forum for MacBook Pro owners.
    You just need to reformat the drive in Disk Utility and erase the drive and have  Mac HFS.
    If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
    Or buy something that isn't pre-formatted to Windows NT file system.
    First though make sure you have backups of your system. TimeMachine being used now?
    http://macperformanceguide.com/Mac-TimeMachine-drive.html
    http://www.apple.com/support/timemachine/
    Maybe cleanout some files you don't need.
    Install a larger notebook hard drive even.
    http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

Maybe you are looking for