Connect c3 wlan configuration

plz help me co connect c3 wlan configuration plz help me a detail configuration
i have router and connect easy but internet not open

If you are experiencing that some of the apps in the C3-00 don't use WiFi even when you choose so to read this thread /t5/Cseries/nokia-c3-wlan/td-p/711188 it has some fixes that people have found useful.

Similar Messages

Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
Only the option "connect to wlan" is succesful.
With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
My notebook is a MacBook pro.
Any idea????
Thank a lot in advance!
Kind regards
Ingo

Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
Apple - AirPort Extreme - Feedback
If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
The "catch" here is that you must have an Apple router providing the network to be extended.

Cannot connect to WLAN on E63

Hi,
I had my home network setup sweet for a while but then my phone started dropping the connection like crazy. One second I could go to a webpage and then the next it would say WLAN not found. Keep in mind this was literally 10cm from the wireless router.
Now at work I tried connecting to the WLAN after following a very comprehensive guide put together by our IT department with all the required details. I also downloaded the required certificate and opened it (selecting all 3 of the options that come up, whatever they were).
Another person at work has the E65 and they connected fine. I have attached the settings I used in case you can spot something wrong.
Cheers
Attachments:
ESeries WLAN Configuration.txt ‏1 KB

My problem is like Harry (whose question I think was answered by cjlim). I have an E63 which I purposely I have do not have my SIM in, as I wish to use it, a) to answer SKYPE calls around the house which I work from thne b) I'm going to transfer my agenda from my PSION 5MX/Outlook and then c) convert the many data files from it, but first the wireless link. Now I have taken out my SIM, I can see my wireless link is recognised but as soon as I move to say Bookmarks etc I get I cannot get say SKYPE to work as it tells me unable to use Network. Phone is in offline mode. Has anyone any suggestions, have been through some of the other areas of the forum, this seems close to my problems! Cheers beecee

Toshiba 46TL938G loses WLan configuration after shut down

Hello,
46TL938G unpacked yesterday, upgraded firmware from Internet.
Wireless set up with WPS works, but configuration is lost after turning the TV off/ back on.
I cannot use assisted configuration because of hidden SSID.
In manual mode I always get information about improper autorhization and/or unsupported encryption. Access point uses WPA2-PSK AES.
Is there any way to make WPS setting stick??

Any news?
I would recommend you to try different configuration scenarios:
- try password which are no longer than 8-10 characters.
- try different encryptions: WPE / WPA-PSK / WPA2-PSK (AES, TKIP or AES and TKIP)
- try to connect with Pre-Authentication ON and OFF
- try to connect to WLan using option Hidden Network - enabled or disabled

Unable to connect to WLAN with Nokia N95

Hi
Just bought a nokia N95 and I'm unable to connect to the WLAN at my work place. No problem connecting to my home WLAN, and there are no problems connecting my laptop to the workplace WLAN.
I browse for WLANs and select "Start web browsing", the wlan name comes up find and I select it, but after quite some time I get: "Internet: server not found".
I've read the other posts about assigning a static IP, but the sysadms here will kill me if I try that. Is there another way of getting this to work? It can't be true that the N95 is so picky with WLAN configurations?
Jens

Can you post your question on here with the WLAN AP model name, firmware version and N95 sw version (*#0000#)?
http://discussion.forum.nokia.com/forum/forumdisplay.php?f=121
Forum Nokia provides a wealth of resources to mobile developers. To be informed about the latest on mobile tools, devices and technologies, register at http://www.forum.nokia.com/main/registration/registration.html

Message "WLAN: Unable to connect. Wlan Network not...

Well guys i bought my nokia 5800 today so like any other curious people i looked the wi-fi hoping connect with the internet and when i try to connect with the wi-fi appears this message "WLAN: Unable to connect. Wlan Network not Found." and then it dosen´t connectbut he finds normally the networ and this message appears after i type the Router password.i´ve already looked in another foruns and i´ve already switch off the Option Qos in my router and the problem cotinues, so anyone can help me?my router is one linksys wrt54g and the type of connection is static ip an the security is Wpa Personal TKIP....
PLEASE ANYONE CAN HELP ME?I´D BE VERY GRATEFUL WITH THE SOLUTION FOR MY PROBLEM...
Thanks
Message Edited by darkcraft on 13-Jul-2009 09:47 PM

tomasvaril wrote:
Same To me. I have Asus WL-500W router at home, WPA2-PSK(AES), password similar to this "lIGf@91pY0TnFY!Jh@7LjTUlsL3ZPY", MAC address filtering. My old Nokia E51 works, my Touch Pro Works with it. When i try my one day old Nokia E72 it does not work, the same like others:WLAN: Unable to connect. Wlan Network not Found. E72 works at my work wifi, which has the same settings but without mac filtering. Have no idea what is happening, all is setting correctly. MAC address of E72 is allowed on router. It has the same settings like E51, but E51 works like a charm E72 does not work. What is wrong?
As already suggested, you could try disabling the MAC filtering from the router, just to outrule possibility of a typo while entering E72's MAC address to router settings.
Have you tried swithing a WLAN channel that your router uses?
Log in to your router's web management pages (check router's default IP address and username/password from it's manual) and switch of the "Automatic" channel selection mode. Try few different channels, like 1, 3, 6, 9, 11, if one of the channels happens to work any better. Note that in case you have set your router to use channels 12 or 13 (or in case "Automatic" channel selection mode has decided to select channel 12 or 13) you must have a SIM card inserted and some other than "Offline" profile enabled on your phone since Offline mode (i.e. airplane / flight mode) won't allow your phone to operate on higher channels than 11.
In case you have configured your WLAN network (SSID) to be "hidden", try disabling hidden SSID mode on the router.
Asus WL-500W router seems to be a pre-standard 802.11n device so might be worth looking in to your router's WLAN settings and see if playing around with router's WLAN operating mode and settings improve the situation. First of all ensure that your router is not set to operate in 20/40MHz mode (set it to 20MHz only) assuming that the router is in default 802.11b/g/n mode. You could also try disabling the 802.11n mode completely by selecting a 802.11b/g mode (if available).
You should probably also check that you're running latest (2.0.0.6 ??) firmware version on your Asus WL-500W router since there seems to plenty of complaints regarding WLAN connectivity and stability issues (in general, not specific to Nokia handsets) with this particular router model.

Nokia C7 - Problem with VPN Connection over WLAN

Hello,
today I installed Nokia VPN Client 44.01(5) for Belle.
Before this update I used the following configuration: I set two SIP-profiles up and for each profile a own VPN-connection. One for connecting over radio and one for connecting over WLAN or hotspots.
So over all I had three kinds of connections or connection groups to choose: "Internet" with the radio and home wlan connections, "Intranet" for the VPN-connection over radio and "Intranet over WLAN" for VPN-connections over other WLANs.
The advantage of this configuration was that I could use the SIP-profile depending on my location and the phone had not to use the "standard" VPN-connection ("Intranet") over radio.
Now after the update I have the problem that I can't connect to my VPN over WLAN at all. Not with the SIP profile and not manually over the internet browser. There is always the notification "Connection Problem".
I tried also to put the "VPN over WLAN access point" from the "Intranet over WLAN"-group to the "Intranet"-group and gave it the first priority, but that doesn't helped too.
Does someone of you had or have the same kind of problem or otherwise has any clue about that?
Any help is very much appreciated!
Thank you in advance! I hope that I described my problem clearly.
Greetings
unsys

testing with the faceplate removed and into the master socket witha brand new filters result's below . I tried the quiet line test and it seems silent so no issues there. Can anyone see an issue, I've posted the noise results etc as well with the faceplate removed. (using a butter knife cause i'm just out of bed and tools are in the garage!)
0.7 Mbps
0 Mbps
1 Mbps Max Achievable Speed
Download speedachieved during the test was - 0.7 Mbps For your connection, the acceptable range of speeds is 0.2 Mbps-1 Mbps. Additional Information: Your DSL Connection Rate :1.06 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM) IP Profile for your line is - 0.75 Mbps
System Up Time 00:11:28
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
WAN
PPPoA
6657
9689
0
2806
19425
00:10:58
LAN
10M/100M
28652
22350
0
22356
5418
00:11:24
WLAN
11M/54M/300M
0
0
0
0
0
00:11:11
ADSL Link
Downstream
Upstream
Connection Speed
1056 kbps
448 kbps
Line Attenuation
49.0 db
27.0 db
Noise Margin
10.6 db
20.0 db

Satellite Pro M70: Cannot connect to WLan with ConfigFree

Hi in Forum.
I'm having trouble with a Satelite Pro M70, concerning gaining control of wireless conections.
When scanning with "The Radar" i ConfigFree for available wireless accesspoints, I get several points available, but is not able to connect to a single one of them. I can read their status and see their WEP encryption marker.
When I try to connect to any one of them, I get a pop up dialog box, which says (translated from danish) "Another suppliers software is in control of the wireless adapter". When trying to set up a connection through the classic windows way, windows states that "windows is not able to configure this wireless connection - if you have another program to administrate wireless connections you must use this". I suppose it refers to ConfigFree...?
Is the unnamed "other supplier" Windows related or maybe McAfee related (Security Suite 2007)?
If you're familiar with this problem or something like it I would be please to know.
By the way - where do I enter WEP encryption keys for my friends WLAN routers in ConfigFree?

> When trying to set up a connection through the classic windows way, windows states that "windows is not able to configure this wireless connection - if you have another program to administrate wireless connections you must use this". I suppose it refers to ConfigFree...?
It must be not a ConfigFree. Depending on you WLan card an Intel ProSet utility or a Atheros Client utility could controls the Wlan configuration!
Please check if one of the both tools controls the wlan and disable the function!
> where do I enter WEP encryption keys for my friends WLAN routers in ConfigFree
You should have three different tabs in the Configfree utility.
The second one Device settigns provides device list and there you should find Wireless network connection.
Choose it and use the button Network connections.
There you should find some encryption settings!
Please check also the Profile settings tab and the option called Security settings

When trying to update the i phone " fault 1630" occurs - both when connected to WLAN or USB. What can I do?

When trying to update my i phone IOS 5.0 (connected by WLAN and USB to my computer) there is always "fault 1630" saying I`ve got no connection to the internet / network, which seems to be wrong to me (phone is online). What can I do?

C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again.

E72: Unable to connect to WLAN

Something weird is with my E72. I had been happily using the WLAN in my house for a few months now. Then yesterday it suddenly failed.
Unable to connect to the wlan. The default browser showed me "Unable to connect. WLAN not found" and "Unable to perform operation"
But during a WLAN scanning, I can clearly search my house WLAN showing me "2WIRE*** found".
E72 had really give me lots of problem. Hope this will be my last problem I encountered with my phone. Thank is advance for any suggestion for this problem.

Try with Hard Reset (shift+space+backspace+on/off). Make a full backup before!
Cheers
Einar

SharePoint 2007:Cannot connect to the configuration database.

The share point 2007 server under Windows Server 2008 R2 runs well formerly, but suddenly the user can't visit the site with error on page:
Cannot connect to the configuration database.
I also checked windows log with bellow main errors：
Log Name:      Application
Source:        Office Server Search
Date:          2015/2/28 22:30:47
Event ID:      10034
Task Category: Gatherer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
Could not access the Search service configuration database.
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Office Server Search" />
    <EventID Qualifiers="49152">10034</EventID>
    <Level>2</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:30:47.000000000Z" />
    <EventRecordID>2323514</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)</Data>
</EventData>
</Event>
======================================
Log Name:      Application
Log Name:      Application
Source:        Windows SharePoint Services 3
Date:          2015/2/28 22:30:50
Event ID:      5586
Task Category: Database
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
Unknown SQL Exception 64 occured. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows SharePoint Services 3" />
    <EventID Qualifiers="0">5586</EventID>
    <Level>2</Level>
    <Task>484</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:30:50.000000000Z" />
    <EventRecordID>2323517</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>64</Data>
    <Data>A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)</Data>
</EventData>
</Event>
==================================================
Source:        Windows SharePoint Services 3
Date:          2015/2/28 22:31:00
Event ID:      27745
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ***
Description:
The description for Event ID 27745 from source Windows SharePoint Services 3 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows SharePoint Services 3" />
    <EventID Qualifiers="14130">27745</EventID>
    <Level>2</Level>
    <Task>1105</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-28T14:31:00.000000000Z" />
    <EventRecordID>2323520</EventRecordID>
    <Channel>Application</Channel>
    <Computer>***</Computer>
    <Security />
</System>
<EventData>
    <Data>#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.</Data>
</EventData>
</Event>
Please kindly support to find the root cause and guide how to fix it ASAP.
Many appreciations for your hellp in advance!
Note:
1)As checked, SQL server service is running well;
2)Web server log under the path C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS with bellow errors:
03/02/2015 11:25:53.28 mssearch.exe (0x0F0C)                   0x08FC Search Server Common
GathererSql                   0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx
Line:9654
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          Common
0 Monitorable Application b9f7f366-4027-4923-b5ce-b93c132df7c3, resource 1: pIDBInitialize->Initialize error. Failed to create a non fast load session. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp Line:608
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          Common
0 Monitorable CResourceManager::CreateSession Error creating non fastload session 'Provider=SQLOLEDB;Extended Properties='Server=***;Database=SP_SharedServices_Search;Trusted_Connection=yes;App=Windows SharePoint Services;Timeout=15';'. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp
Line:658
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          UtilCommon
0 Monitorable Dumping error record [0]:   Source: Microsoft OLE DB Provider for SQL Server   HRESULT: 0x80004005   Code: 11   Description: [DBNETLIB][ConnectionRead (recv()).]General network error. Check
your network documentation. - File:d:\office\source\search\common\pkmutild\atldbext.cxx Line:1250
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C)                   0x08FC Search Server Common          GathererSql
0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:9654

Hi,
In this forum we mainly discuss questions and feedbacks about Office products, since your question is about SharePoint, I suggest you post the question in SharePoint forum to get further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Internet connection failed to configure DHCP ipv6 on Small business server 2008

1. disabled ipv6 on nic and RESTARTED SERVER....
2. realizing i did a mistake, i renabled ipv6 on nic after that
3. now fix my network gives error report DHCP not configured properly for IPV6
4. ipv4 has fixed ip address (192.168.43.9), router ip 192.168.43.254, i chose dynamic ip assignment for ipv6 (not sure should be static or dynamic).
5. Fixed my network assigned fixed ip address automatically but failed to fix error DHCP for ipv6 for the network.
6. i also tried internet connection wizard, which fails reporting error Internet connection wizard cannot configure dhcp for ipv6 sbs 2008. this
error is received after click NEXT button on successfully server and router ip on Detecting Router and configuration page.
Although I am not using IPV6 but server may be using it. Can someone please please help me.
thanks

Hi,
I can find that there is a
same thread that you posted in the forum. I had replied it. Please check if can help you. Just remind that please reboot when uncheck IPv6 option and monitor the result. Meanwhile, please check if can find some relevant issue when you run
SBS 2008 BPA.
In addition, please refer to the following thread and skip the DHCP check, then run the wizard. Please check
if this wizard can be ran completely. If run successfully, then enable the DHCP
again.
SBS
2011 is detecting DHCP on my network after I disable it and i cant continue setup
Hope this helps.
Best regards,
Justin Gu

Nokia 5800 connected to WLAN but can't browse the ...

wassup! peeps.
recently I can't browse the web or use any free messaging apps such as Nimbuzz on my nokia 5800 (fw version 21.0) finland made, but clearly indicates that it's connected to WLAN...the ones I used before (in my home & @ my work).
I noticed it started when I was waiting for a video in youtube to finish buffering, then halfway to it it suddenly went back to my main screen. when i tried again, same thing happens. then i try to log-in to facebook or any website... first it will give the impression that its connecting but then, juz a couple of seconds or less, it willl suddenly revert back to my phone home screen.
this started a couple of weeks back, and now the bluetooth too is f***ed-up!
because my laptop can't see it, while yesterday it can.
it seems that mines the first one with this kind of problem bcoz i can't find any forum discussing this issue.
anyone who can help will be worshiped forever...thanx!
Solved!
Go to Solution.

You could also try to clean privacy data inside the browser, and reset your device by taking out the battery for a couple of min and set it back again.
Last resort: Soft reset it by dialling *#7370# (this will delete contacts, messages and everything else on C, so make a backup using PC suite) and do a format of the memorycard. - Then you start out with a fresh device.

N8 re-connect to wlan all the time.

I have search the forum and it seems that many people have the same problem. However I have not yet found a solution to the problem.
Widgets are set to offline. Datapacket is "only when needed".
Switch to wlan is "manual"
Data use in home country is "Always ask" . It connects without asking anyway!
Email is set up to sync every 30 min. This is not the issue.
I have social 1.2 installed but widgets are set to offline so it doesn't update.
The phone is ALLWAYS connected to wlan. If I tried to disconnect, it reconnects immediately. I can make it work by setting the phone to offline -> remove the access point (home network) -> put it back to online.
If I try to connect to home network via wlan guide now, it says "connection not available". However, if I restart the phone here then I can connect via wlan guide.
This will make the connection work properly. Email will connect when syncing and then disconnect again like it should.
If I restart the phone once more (now the home wlan connection is set up) then I will be back on square one. WLAN connected all the time I refuses to disconnect.
I would like to call this a proper BUG. This has nothing to do with setup.
Does anybody have a solution for this or do I have to wait until Nokia FIXES this?
I'm running PR1.2
regards
/Jens

I do have the wlan set to a higher priority than packet data. This is the way it should be I believe. I want it to connect via wlan first then packet data if no wlan is available.
I just tried to kill the "xmppservice.exe" process and this solves the problem. However this requires that I buy a 3rd party task manager. So this isn't really a solution. Also this needs to be done each time the phone reboots.
I also noticed that it is not just connected all the time but it is continuously sending data at slow rate.
The question here is really what does the xmppservice do I why does it work when shut down?
/Jens

WLAN Configuration g++

Hello,
My setup: there are 3 Computers, all connected via WLAN, to an router (no Apple), this router supports 802.11g++. The first Computer is connected via 802.11g++ (max 125 Mbit/s) running windows, the second also windows connects via 802.11g (max 54 Mbit/s). The third is my Macbook Pro, with ability for 802.11 a/b/g/n but I can only connect with 54 Mbis/s, can you tell me why ? For sure, n is not g++ , but n is the successor so at least the g++ connection should be available. Is there anything else required for g++ maybe another update, like the Update to n ?
Regrades Snoop1990

AFAIK your router would have to specifically support the N Standard in order for your mac to connect to it using wireless N.
What is the make and model of your router I may be familiar with it.

Connect c3 wlan configuration

Similar Messages

Maybe you are looking for