Connect Crystal reports using SAP BW 3.X
Hi,
Help me in Crystal reports with BW :
We are using Sap Ecc 6.0 and BW 3.x. I want create BW queries in Crystal Reports.
1. which Crystal reports versions are supported. ( I have crystal reports 6.0 )
2. Send me the procedure to connect and create crystal reports .
3. any FM is there to connect and display Crystal reports using ABAP like ALV .
Thanks in advance.
Regards,
BusinessObjects and SAP - Overview
/people/ingo.hilgefort/blog/2008/02/07/businessobjects-and-sap-part-i
Crystal Reports and BI Queries
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Crystal Reports and BI Hierarchies
/people/ingo.hilgefort/blog/2008/02/27/businessobjects-and-sap-part-3
Crystal Reports and SAP R/3`
/people/ingo.hilgefort/blog/2008/03/23/businessobjects-and-sap-part-4
Getting started
https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/20f83c7e-3f2a-2c10-7dbf-a5ec14611a1e [original link is broken]
Software / Installation
https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/a02d2792-452a-2c10-7c8f-ddd50dad779b [original link is broken]
Content Library
https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/70041b55-b52a-2c10-87a3-e4fa3c3acdaa [original link is broken]
Ingo
Similar Messages
-
Connecting Crystal Reports to SAP BW BEx query
Post Author: mfrank
CA Forum: Data Connectivity and SQL
We have used Crystal Enterprise 8.5 to connect to an SAP BW BEx query in the past, however we are having some difficulties. Rather than trying to upgrade our old CE system, I've been told that we should be able to connect Crystal Reports (2008?) directly to the BW BEx query. I've been trying to accomplish this, but can't seem to find any drivers that will allow the connectivity. When I try to set up a connection using OLAP, the only two options listed are Hyperion and Microsoft OLAP. I have an old version of Brio Query (now Hyperion, now Oracle) that does show up with a driver for BW, but this doesn't show up in my Crystal options.
Can someone give me some advice as to how to connect Crystal Reports to SAP BW? I realize there are licensing issues with running live data without using Crystal Enterprise (or later BO products), but I'm just looking to print a report to a PDF.
ThanksPost Author: A Kumar
CA Forum: Data Connectivity and SQL
Hi mfrank,
I am also facing a similar kind of a problem. Did you get any solution to your problem. If yes, kindly let me know.
Thanks
A kumar -
Error with crystal report using SAP GUI
Hi,
While using crystal report in sap gui i get the following error. I already googled and only found one thing on this forum that talks about this and it was never solve. Can you please help me? Thank you
Errors in Crystal Reports Installation(SupportsSAPQuery)
Message no.ALVHT218
Diagnosis:
This function requires that Seagate Crystal Reports and the Functional Area drivers(InfosetDrivers) from Seagate software are installed.
This sotware is either not available on your frontend or has been installed with errors
System Response:
The action has been terminated
Once again
thank youHi
Please check if you have installed all the SAP transports which are required for Crystal Reports to run based off SAP.
Regards
Sourashree -
Error Message while connecting Crystal reports with SAP CRM
Hello Friends,
I am able to establish a connection with Crystal Reports with SAP CRM but after that i get a error Function module "Crystal/Get_ODS_field_Info "not found & Database connection error RFC/invalid/ handle".
Please advice how to solve this.
Regards
SwatiHi,
You need to have the BusinessObjects Integration Kit for SAP. Integration Kit provides the database drivers and other features for reporting off SAP,to access sap objects into BO or Crystal Reports
Link to download the useru2019s Guide:
Please go to Http://help.sap.com
Click on BusinessObjects tab
Select the product as Integration Kit for SAP
User guide: BusinessObjects Integration Kit for SAP Useru2019s Guide.
It will list all the documents for Integration Kit for SAP which will be helpful to you.
Also if you have any other questions around the SAP Integration Kit for Crystal Reports I recommend to post this query to the Integration Kits - SAP forumThis forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
you can download the complete documentation from the following link :
http://support.businessobjects.com/documentation/product_guides/
Choose "BusinessObjects XI Release 2" for the version and "Integration Kit for SAP" for the Product
http://www.businessobjects.com/solutions/sap/default.asp
Also Search ->Expert Forums->Business Objects-->Crystal Reports design
Regards
CSM Reddy -
Database Connection error in Crystal Reports using SAP BW system
Hi,
While using Crystal Reports in trying to build a report on the SAP Query in SAP/BW System using the MDX driver, I am able to get the structure of the query fields into the report but on the other hand while trying to refresh the report for data I am getting the error message u201C Failed to connect to the databaseu201D . This database connection error occurs despite the fact that the SAP server authentication details being entered on Refreshing the report is correct.
What could be the possible reason? Any guess...
Thanks,
AmoghHi,
Yes, I am using the MDX driver.
Is there any pre-requisites of importing certain ABAP transports into SAP Server since I haven't done any? Please recommend.
Thanks,
Amogh -
Unable to Access BI InfoSet in Crystal Reports using SAP Info sets driver
Hi,
I am looking to develop a report on top of BI InfoSet in Crystal Reports. However using the the SAP InfoSets driver I am only able to visualize 'Classic InfoSet' and 'SAP Query'. It does not show the option to import the regular InfoSet as a datasource. I am unable to access the InfoSet built by the db join on InfoCubes that is available in SAP BW System.
Can anybody help.
Thanks,
AmoghHi all,
i know this discussion is abaout 2 years old, but i faced a similar problem. I try to get access to the regular InfoSets (SQ02) within a direct connection between SAP and Crystal Reports. Which components and tools did i need to get a connection?
look here: http://scn.sap.com/thread/3365060
Thanx for your help!
Best Regards
David -
Connecting Crystal report with SAP MAX DB DATABASE
Hi friends,
Can we connect SAP MAXDB database with crystal report to generate reports.
If yes pls give me steps to do the same.
basically we want to generate few reports in crystal report(separate from SAP ABAP)
rgds
Bi> Can we connect SAP MAXDB database with crystal report to generate reports.
Technically that's possible -y es.
> basically we want to generate few reports in crystal report(separate from SAP ABAP)
You can use the SAP standard tools (SAP Query - SQ00) or Quick Views (SQVI) to do the same in ABAP.
If you connect to the database with an external tool you have to use a user who has ALL permissions on the database, means, a full table can accidentally be deleted. The user can also use ALL tables.
Markus -
Creating BO or Crystal reports using SAP - R3 - Possible?
Hi,
Is it possible to create Business objects or crystal report with just SAP R3 system (without using SAP BW)?
Thanks in advance
Regards,
Subbu SHi,
In latest release in BOXI3 we have option BO and SAP integration kit.whilt installing you need to install this integration kit i.e. how we are installing Deski and designer.
Once you have install this option we can directly use SAP R3 source and we can gentrate reports and we can use SAP R3 source table in to universe desing and we can design universe. Once universe desing done we can use this universe for report creation.
Thanks
Vivek.K -
I have downloaded a trial version of crystal rpt. But can I connect to SAP to try out? Thx
Hi there,
yes you can.
You need to install BOE and SAP Integration Kit. These are also availiable for 30 days trial versions.
You also need to install some packages (transports) on your BW-system to get the best performance of connecting CR to BW.
Kind regards
/martin
PS. I wasn't sure if you meant SAP ERP or BW. Which one is it you want to connect to? -
How to connect crystal report 2013 using sap business one data source
hello Professionals .
when i try to use data source sap b1 in crystal report 2011 or 2013 i got no list in company database,
when i try to write it manual i got error "Connection failed".
I tried to connect OLE DB and ODBC all work fine with me.
i attached some snapshots .
Any Advice Please ?Hi Mohamed,
Please check below link.
SAP Crystal Reports 2011/2013 doesn't show Company Data Base
SAP Business One Data Source in Crystal
Crystal Reports - How To - Connecting to your SAP Database - YouTube
Migrating Crystal Reports of SAP Business One from SQL Server to SAP HANA
Hope this helps
Regards::::
Atul Chakraborty -
Crystal reports 2013 , SAP MDX Driver not able to connect with BW BEX Query
Hi All,
We just installed Crystal 2013, and want to create crystal report on SAP BW CUBE/BEX Query through SAP MDX Driver.
1.When start connecting through SAP MDX Query option from new connection , SAP Systems which are in SAPLOGON are not appearing in initial screen. where as from OLAP Connection we are able to connect to SAP BEX Query.
2.Even from SAP Tool kit we are not able to connect to BEX query, we are getting ERROR MESSAGE.
and we are using SAP BI BO PLATFORM 4.1 sp01 .
Please suggest me , if I am missing any configuration settings.
Regards,
JosephHi Joseph,
Before you start building the report, make sure the right transports have been loaded on the SAP System. The right Transport files are the ones found inside the installation zip you download from SAP's server. They're under the "Collaterals\Add-Ons\SAP\Transports" folder.
For more info on Transports, authorizations etc, please have your BASIS admin go through this wiki:
Crystal Reports 2008 and BW - Installation and Configuration - Business Intelligence (BusinessObjects) - SCN Wiki
To resolve your first issue, please follow the steps from this thread:
Problems with SAPLogon.ini for SAP GUI and Crystal 2011
P.S: Crystal Reports for Enterprise 4.1 does a better job at handling BEx queries that the CR 2013 designer. It directly connects to BEx queries via the BICS connectivity driver and doesn't need the Transports to be there on the SAP System. You might want to give this flavour of CR a try too.
-Abhilash -
Connection between Crystal Report and SAP ECC
Hi. can you help me please.
I'm testing the connection between Crystal Report and SAP ECC. I tried using the tables,
but by making the links between foreign keys does not bring data. The other way I tried was using an ABAP function module,
but using this way, Crystal will only works like a Presentation Layer because all the work was did it in ABAP;
besides that shows the limitation that I can not pass as input a table.
what is the best practice for reporting on SAP ECC using Crystal Report?
Thanks.Hi,
Crystal Reports is able to leverage tables, ABAP functions, SAP query and InfoSets.
what is the issue when using the tables ?
ingo -
Type Of Connection For Crystal Report in SAP B1 2007 A
Dear All,
I want to make Crystal Report for a module?What connection must be used? I made User DSN and File DSN both but when I called that particular .rpt file from SAP B1 2007 A it shows the error "
Crystal Report Windows Forms Viewer
Failed to open the connection.
Failed to open the connection.
TestFileDSN_OITM {A3103093-3D56-4F37-95B4-AD9739E212A2}.rpt
If possible please tell me the details how to used appropriat connection on both client and server (if possible step by step).
Thanks in advance
Ghazanfaris your report running inside SAP b1 or directly from crystal report in system where you developed it
In Client you need to install .net framework 3.5 and Crystal Run time to run reports.
in the client make sure the shared directory is accessible from run without any password
and in the add on go to report properties and set the path to the shared folder .rpt files and apply changes
use OLE DB connection
CRYSTAL REPORTS 2008 V1 FOR B1
(click on Installation)
https://websmp208.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=01200314690900002156&V=INST
Crystal Reports Integration for SAP Business One
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/707f51b3-0b20-2b10-8daa-d8ee72ace309 [original link is broken]
in case you have any problem installation go through the demo and make sure you have installed correctly
https://websmp201.sap-ag.de/~sapidp/011000358700000727712008E.htm
Thanks
Krish -
Print Preview using crystal report in SAP B1 slow.
Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a query view in SQL server but it's still slow for my user. First time i create using table in crystal report. just drag the table. It's take more than 10 minutes. After that i move all the query to view in SQL server , it's take 1-2 minutes to print preview some time more.. But i think that it's still slow. Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
bodhi86Hello,
How do you answered to this question ?
Malika
Edited by: Malika Sanoune on May 13, 2011 1:48 PM -
Print preview using crystal report in SAP B1 is very slow.
Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a layout in AR invoice form and applying the print sequences (ie 4 prints). Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
Kamlesh NawareHi,
Basically Crystal report run with SQL statement, I would suggest to do well performance tuning on SQL query / Store Procedure.
Structure your query in DBA manner that will make some how faster such as use ( inner join, less condition,...)..
also if it simple query then use Command in Crystal report rather store Procedure..that make some how Faster your report.
Thanks
Kevin
Edited by: Kevin Shah on May 27, 2011 4:21 PM
Maybe you are looking for
-
Time machine taking too long (indexing)
I run my time capsule to back up both of my computers a Imac 2GHz intel core duo running 10.6.8 and an Imac 3.4GHz intel core i7 running 10.7.4 both are connected wirelessly to the Time Capsule Recently, on the older machine, backups have stalled. I
-
Different background color when loading applets
I can't find the information for when a browser loads an applet, to change the background color while the applet is loading. I know there are other "optional" applet tags as well, but I can't find the information. Any help is appreciated.
-
Hello everybody, Does anyone have an idea of how long it takes to configure XI 04S? and what are the material requirements? I'm new in XI and i worked on the configuration of XI 3.0 but i haven't allready configured XI 2004s, so i wondered how long i
-
What is the Statistical Analysis
Hi, What is the Statistical Analysis(I need Tcode and What would i check in this) and Indexes Analysis(I need Tcode and What would i check in this) and RSRV also. Please do the needful for me. Thanks
-
FCP X deleted about 2/3 of events to a project and the project. I uploaded the project to vimeo from FCP X, and the next day when I tried to use FCPX, they were gone, the events are gone from fcp and my ext hd, the project is still on the ext hd, but