Connect Desktop Tool Using EBS Security

Hi,
I have integrated EBS security with BI Publisher successfully. Now I want to access through Desktop tool as well i.e. from Word,Excel etc. But unable to do is there any setting i need do.
Really appreciate your help.
Thanks
SYK

Similar Messages

The server you are connected to is using a security certificate that CAN NOT BE VERIFIED.

First we have changed nothing, we have not done anything to our Yahoo or Outlook 2003 and suddenly this starts popping up all the time.
We have Windows 7, Office Pro. 2003 and use Outlook 2003 with Verizon Fios and Yahoo is our email server. This message started popping up yesterday out no where, does anyone have any thoughts about it? I have posted it on the Verizon site, however I have more faith in the help I receive here thank you.
The server you are connected to is using a security certificate that CAN NOT BE VERIFIED.
A certificate chain processed but terminated in a root certificate which is not trusted by the trust provider.
Do you want to continue using this server?
Solved!
Go to Solution.

Did you get any email notification of a change to your email servers? So far I only found these settings from 2010
Incoming Server: incoming.yahoo.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a Secure Connection (SSL): No
Port: 110
Outgoing Server: outgoing.yahoo.verizon.net
Server Requires Authentication: Yes (You can set it to use the same settings as incoming, or manually enter the username and password.)
Requires a Secure Connection (SSL): No
Port: 25
(Big thanks to SomeGirl for this info)
Are these the settings configured in outlook? If these are the setting they may need to be updated
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

Internet Security Warning - The Server you are connected to is using security certificate that...

Mail Client on Laptop is Windows Live Mail. Mail server outgoing.yahoo.verizon.net. DSL Internet. Long time Verizon customer. Client configuration settings correct according to Verizon. I now get an Interenet Security Warning message whenever I start up the Live Mail Client and send an e-mail. Only happens on sending e-mails. The warning message comes back looking for a YES or NO answer. The message is
"The server you are connected to is using a security certificate that could not be verified."
"A certificate chain processed, but terminated in a root certificate which is not trused by the trust provider."
"Do you want to continue using the server?" "YES or NO"
I click YES in order to successfully send e-mail messages which I do not like to do. I only have to press YES on the first e-mail message that I send. The rest outgoing e-mail work correctly after that first one.
What has Verizonn done to cause the problem on my client software? I have done nothing to change configurations on my Windows 7 and Windos Live Mail laptop. I have done some research, and verified that my computer time and time zone is correct. I am looking for an explanation on why this is happening from Verizon.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

If no one has a better idea you may want to unlink Yahoo from VZ. http://forums.verizon.com/t5/Verizon-net-Email/Unlinking-Verizon-email-from-Yahoo-portal/td-p/413475 It is possible to lose data as pointed out in the linked thread.
OR Did you get any indication that your mail server settings were going to change at the end of Sept 2013? A mass email went out for "standard" verizon users earlier this year. I am not sure if this effects Yahoo/VZ settings.
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

Viewing a report using integrated security for connection to database

PLEASE HELP!!
I am able to connect to an SQL Server 2008 database from the Crystal Reports Designer using integrated security and can succesfully load the database to create my report with. I provide the following parameters at connection;
Connection string = jdbc:sqlserver://<hostname>:1433;databaseName=<dbname>;integratedSecurity=true
Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
HOWEVER, I do not know/cannot find how to then access the report using JRC in a JSP Web Viewer for Crystal Reports.
Any ideas experts??
Regards
Nick Hirst

I'm having this same issue, but from the desktop app side. Did you ever find a solution?

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
Rp

1. in physical connections part can i use the same work schema
2. Can i use same contexts created or do i need to create everything as new and then try?
Thanks,
Rp.
Hi,
As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

WRT54G2 dropping connection when I use security

I can only get connection that is stable when I eliminate all security. I have gone through both levels of security on multiple computers and still cannot hold a stable connection unless I disable all security. Im looking for any advice I can get.

From your post, I assume that you are able to make a secure wireless connection, and that your Internet connection works through this secured wireless connection, but that you frequently loose your wireless connection --- is that all correct?
If so, then the most likely cause is that you simply have a poor wireless connection. Secured wireless requires a more solid wireless connection than is needed for unsecured wireless. So when you have a poor connection, your secured wireless is more likely to drop your connection. Note that you can have a poor wireless connection even if your computer shows "five bars".
There are many causes for poor wireless connections, and many solutions:
First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. If your router has external antenna, they should be vertical.
Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. If your current network is not listed, enter its info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".
If the above does not fix your problem, download and install the latest driver for your wireless adapter.
Some users have reported improved wireless performance by switching to WPA encryption.
If you continue to have problems, try the following:
For wireless g routers, try setting the "Transmission Rate" to 54 Mbps.
If you still have trouble, download and install the latest firmware for your router. After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Hope this helps.
Message Edited by toomanydonuts on 11-23-2009 01:47 AM

Connecting to 802.11a AP using WPA security - no go

I have an AP that is set to 802.11a (5GHz) using WPA security and is set to hide its SSID. My iMac is connecting to this AP without any problems whatever frequency i set on AP, hide/show SSID. The problem is - Macbook does not show this AP in AP list when requested, if i select other and enter correct settings (ssid and WPA passkey) it says - connection timed out, AP does not show any signs that something even tried to connect to AP.
the only resort is to use 802.11g when i can connect to AP without any problems.
in Network utilities it shoes that it supports 802.11a/b/g/n
hope i gave enough details.
later today i will try to set WPA2 instead of WPA, also will try to set no security settings at all.
any thoughts how to force it to connect to 5GHz AP?
edit:
forgot to say why i want to switch to 5GHz - the problem is - lately many 2.4GHz b/g APs popped up in neighborhood and started to cause latency/interference as some manage to follow me over frequencies i set up.
Message was edited by: janiskr

ok, setting to WPA2 solved the issue, because still, with WPA configuration i was not able to connect. allowing TKIP and WPA2 allowed macbook to connect. Also iMac changed the settings to WPA2 and it didn't matter that it had correct settings fot WPA.
weird.
maybe someone could point out how to set these things explicitly, so i can choose what settings are in use.

Is it possible to use EBS as a ETL tool ?

Is it possible to use EBS as a ETL tool ?

Hi,
Are you referring to "Extract, Transform, Load"? It is possible to download/upload the data from/to Oracle Apps and there are many APIs and tools (provided by Oracle or 3rd party) which should be helpful -- Please see these links for details:
Oracle Integration Repository
http://irep.oracle.com
3rd Party/ISV Generic Installation Advice
3rd Party/ISV Generic Installation Advice
Note: 951604.1 - Implementing Oracle EBS Service on a Separate Instance
However, you still need to use such tools with caution (make sure it is supported) as you do not want to end up with referential integrity issues and data corruption problems.
Regards,
Hussein

Connections drop when using Cisco Anyconnect Secure Mobility Client

Folks I have a strange issues. I have a few laptops that I'm testing using the Cisco AnyConnect Secure Mobility Client Network Access Manager. We like the interface and overall are happy, but have one nagging issue. Periodically the connection drops when using the client, and the only way to reconnect is to choose the Network repair option on the client. That fixes it just fine, but we shouldn't have to do this. The same clients using the built in WIndows supplicant do not have this problem. We are on version 3.0.07059.

Right now I'm testing on a single access point (autonomous) with WEP! The same laptop works fine without the Cisco client. Usually it is several hours, 12 or more when it happens, but I've seen it less than that. And I've seen it up for over a day and a half. At this point I just don't trust the client to roll out to a larger audience.

I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??

I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??

Hi ashleydanc588,
If you are interested in more information on using an iMac in Target Display Mode, including what machines are compatible, you may find the following article helpful:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Regards,
- Brenden

Cannot install the Microsoft Exchange connectivity analysis tool

I am troubleshooting our new 2013 Exchange server because Outlook client cannot connect but OWA is working fine. The 2 new 2013 Exchange server as DAG were installed to co-exist with Exchange 2007.
I am trying to download and install Microsoft Exchange connectivity analysis tool BUT always got an error "Error attempting to install the Microsoft Exchange connectivity analysis tool" and in the log the error is "URLDownloadToCacheFile
failed with HRESULT '-2146697208'.
I am installing it in Windows 8 64b, Please help as we are troubleshooting the new Exchange without any success so far...If there is an full download link, please provide.
Thanks in advance...

Hi Teyob,
Did you try to use different browser to check if the issue persist?
This issue was occurred on browser. If you IE with this issue, we should check to clear the option "Warn if changing between secure and not secure mode" from your Internet Explorer(IE) Tools--Internet Options--- Advanced--Security.
If the setup URL of the ClickOnce application being installed is redirected from a non-secure to a secure site (or vice-versa), the installation would fail due to the Internet Explorer warning. Therefore, please make sure to remove the redirection completely
and point to the actual setup URL.
If the issue persists, we could perform Windows Update to install updates and then run the Desktop configuration again.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

PI 7.11: Cannot connect to server using message server:...

Hello Guys,
we make the Application Management for a Customer PI System.
Scenario:
- the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
- WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
Problem:
Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
"Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
In the Details from the Error Message:
"<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
Sorry for my bad English
Best Regards,
Markus

Hi Markus,
did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented. There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
(This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
Solution: Establish a connection without any proxy in between.
E.g.: a terminal server in the same network
It would be helpful to find more people with the same problem to force a fix from SAP for that.
If anyone else is having problems with this, please add a comment to this thread.
Best regards
Christian

Using SSAS Security Proxy as a Data Source in SSRS

Hello--
We have a tabular model that is exposed externally to our clients via msmdpump.dll (Configure
HTTP Access to Analysis Services on Internet Information Services (IIS) 7.0).
We have also created a proxy to use custom security accessing the cube. This proxy works fantastic from Excel. The proxy URL looks like this:
https://xxxxx.xxxxx.com/login
However, from Reporting Services, using the URL to the security proxy as the server name, I cannot make a connection. I ran a profiler trace on the server and I see a connection trying to be made to get the database names, but it returns an error that says:
"DataSourceInfo property cannot be overwritten."
I've searched and searched online and found nothing so I'm turning to this forum to see if I can get some help here.
To summarize, the proxy works great from Excel, but does not work from SSRS. It attempts to connect and get the database names, but returns an error.
Any help would be greatly appreciated!!

Hi AshleyPaceNC,
According to your description, you have configured Http access to SSAS, and you also created a custom security for when connecting the cube. Now you find when applying the custom login URL in Excel, it can work. However, In SSDT, this URL is not working.
Right?
In this scenario, I want to know the connection string you use in Excel. You can click Connections->Properties->Definition to see the Connection String.
Based on my research, it seems the internal working of Excel external data source connection is either a ODBC or OLEDB type connection. It can access with credentials via some hops redirect. However, in SQL Server Data Tool, our BI services directly
open connection to the data source (database, file....), so it can't have a URL redirect before getting the destination database.
Best Regards,
Simon Hou
TechNet Community Support

Windows 8 Remote Desktop Error "The Requested Security Package Does Not Exist"

When my remote host (win server 2008 R2) is configured to use SSL for security layer, RDP from my Windows 8 gets
"An authentication error has occurred. The requested security package does not exit."
When the host is set to use RDP security layer, it works fine.
Registry key solution for Win7 suggested on other posts does not seem to apply to win8.
This is a Lenovo desktop, I uninstalled silverlight and bunch of other OEM installed programs.

This fixed my problem in Windows 8 while connecting to a Windows 7 host. I needed the pku2u entry. I decided to look it up and here's the info for anyone that's interested.
Introducing PKU2U in Windows
Applies To: Windows 7, Windows Server 2008 R2
This product evaluation topic for the IT professional describes the Public Key Cryptography Based User-to-User (PKU2U) security support provider (SSP) that is new in Windows 7 and Windows Server 2008 R2.
PKU2U protocol
The PKU2U protocol in Windows 7 and Windows Server 2008 R2 is implemented as an SSP. The SSP enables peer-to-peer authentication, particularly through the Windows 7 media and file sharing feature called Homegroup, which permits sharing
between computers that are not members of a domain.
How PKU2U works
Windows 7 and Windows Server 2008 R2 introduce an extension to the Negotiate authentication package, Spnego.dll. In previous versions of Windows, Negotiate decides whether to use Kerberos or NTLM for authentication. The extension SSP for Negotiate,
Negoexts, which is treated as an authentication protocol by Windows, supports Microsoft SSPs including PKU2U. You can also develop or add other SSPs.
When computers are configured to accept authentication requests by using online IDs, Negoexts.dll calls the PKU2U SSP on the computer that is used to log on. The PKU2U SSP obtains a local certificate and exchanges the policy between the peer computers. When
validated on the peer computer, the certificate within the metadata is sent to the logon peer for validation and associates the user's certificate to a security token and the logon process completes.
For more information about developing SSPs, see
Custom Security Packages in the MSDN Library.
For more information about the Negotiate extensions (Negoexts), see
Introducing Extensions to the Negotiate Authentication Package.

Desktop tool for Oracle Database 10 XE Client?

Hi,
I have installed Oracle 10g Client XE on Windows remote computer. By SQL Command Line I'm correctly connected whit Oracle Database XE Server on a differrent computer.
This is my question:
there are desktop tools, similar to "Net Manager" of "Oracle 9i Client", for manage Client instance ?. As i can manage Client istance for configure host_name, port and service_name in relation to the Database XE Server ?.
In a "2 Day DBA Guide" have not found nothing !
I have the doubt of to have made an wrong installation !!!
Thanks in advance
Mario

This is my question:
there are desktop tools, similar to "Net Manager" of
"Oracle 9i Client", for manage Client instance ?.No, you must use "normal" 10g Client for that features.
As
i can manage Client istance for configure host_name,
port and service_name in relation to the Database XE
Server ?.Again use "normal" 10g Client for that - XE Client is based on Instant Client. For enabling ceratin "features" of XE Client see Installing Oracle Database XE Client.

Connect Desktop Tool Using EBS Security

Similar Messages

Maybe you are looking for