Connect Devices not working properly

I just reinstalled my OS 10.4.6 and FCP Studio and log/capture isn't working correctly, nothing comes through from Canopus. When I print to video on my DVX I get audio and no video.
Based on what others have posted, I reverted to QT 7.0.1, but this didn't solve the problem.
Ideas?

Yes - deleting the receipts tells Quicktime to do a complete install - leave nothing out...
New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Similar Messages

  • Since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up

    since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up, while the airplay works fine with my iPad and iPhone. Anyone has experienced the same? any fix available?

    Hi Erdelestre,
    Thanks for visiting Apple Support Communities!
    See this article for some tips about troubleshooting AirPlay:
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Troubleshooting performance issues with AirPlay or AirPlay Mirroring
    If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
    Ensure that other devices are not trying to stream to the same Apple TV at the same time.
    Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
    Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
    Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
    If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
    If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
    If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
    Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
    Best,
    Jeremy

  • In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

    In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • No sound and audio device not working properly, T61 vista

    I unistalled the audio device SoundMax integrated HD audio because I had problems getting the mic of my new webcam (Logitech pro 9000) to work. But after reinstalling the SoundMax audio driver the audio device is no longer working.
    Installing the SoundMax driver doesn't report any problems and the device manger also says that the SoundMax integrated digital hd audio device is working properly. But the speaker icon on the taskbar is crossed out. When hovering the mouse over the speaker icon it says Volume: 0 SoundMax integrated digital hd audio. When opening the Volume Mixer it says "No audio decivice is installed"...
    I've completly removed all drivers and reinstalling several times but I cannot get it to work so I really need some help now.
    All software + drivers regarging the webcam has been completly removed.
    System data:
    T61, Vista business
    Audio chip seems to be a Analog Devices 1984
    SoundMax driver version 6.10.1.5510 (latest available from lenovo)

    Really silly bug, but there are times with the T series laptops, specifically the T61s that seem to not project the sound through the speakers and the way to fix it is to just keep hitting the silver volume buttons up by your power button on the actual laptop.  This may or may not work for you, but I literally just got done with this on a T61 running a fresh installation of XP.  The buttons on the lenovo itself control the direct signal input and do a very poor job with integrating with Windows Vista and XP.
    Let me know if that works for you.

  • TS2771 My Ipod (2nd gen) says connect to Itunes Because i restored it without a computer so when i connect it to my computer (windows 7) it says unknown device and i tried troubleshooting it and all it says is device not working properly.

    please help

    Try:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • USB media device not working properly

    Hello, I have a USB surround sound device that I cannot seem to get working properly. The audio works for the front speakers but will not work for the center or subwoofer. I have gone into the midi/audio device and switched it to multichannel, and it still wont work. The weird thing is that when I test the center and subwoofer speakers under the multichannel settings they respond, but when playing audio I can't get them to work. Any suggestions?
    Black MacBook 2 GB RAM   Mac OS X (10.4.7)  

    I have formatted and installed Windows 7 64bit and USB's were working!!
    Updated and now they don't again?
    Its going out the window soon!!
    Could the firmware update play a part? Am I able to go back to the older firmware?

  • TCP IP multi client connection is not working properly

    My Program is a client server software communication where the server collector data from a cDaq and sends data to the client then the client sends command to the server to execute. The problem I encountered is when I sedn a command to the server, It shows that the server receives it but it doesnt execute it properly. Please take it a look, and see where I went wrong. I have been stuck on this for a while. I will add the more subvis after this post 
    Solved!
    Go to Solution.
    Attachments:
    multiconnection-server-with waveformGen.vi ‏102 KB
    Daqmx channels config.vi ‏36 KB
    Waveform command receiver.vi ‏27 KB

    It's missing Untitled Library 1.
    What does  "not execute properly" mean?  Waht is it doing or not doing and what are you expecting it to do?
    I see a problem in the TCP-IP subVI client.  Why are you enqueueing an element then immediately dequeueing it?  Then you proceed to to enqueue it again after the subVI ends.  But you have a parallel loop where you dequeue the element.  You've got a race condition.  One of two things could happen.
    1.  The data gets enqueued and dequeued inside the subVI.  When it ends, it gets enqueued again in the same queue.  Then the parallel loop could dequeue it and work with it.  I'm guessing if this order of execution happens, it probably behaves properly for you.
    OR.
    2.  The data gets enqueued inside the subVI.  The parallel loop with the dequeue is sitting there waiting for something, dequeues the element and works with.  Then the dequeue inside the subVI sits there forever waiting for an element in the queue that will never come because now you've locked up the code.  The loop can't iterate to ever get more data in the queue.
    You have a lot of strange queue operations going on in that subVI and another subVI in the parallel loop.  Why are you obtaining another reference to the queue, flushing it, then releasing that queue reference.  I'm not even going to try to guess how that would complicate the 2 scenarios I already listed above.
    I suggest looking at more queue examples to understand how they work.  Any given queue should only have 1 dequeue operation, otherwise the dequeues will race to steal the data from each other.

  • Re: Satellite Pro 40 Synaptic Pointing device not working properly

    Good morning, I have a brand-new Satellite Pro L40 and the Synaptic mousepad has stopped operating.
    When I go to COntrol Panel > Mouse I get a message teling me that the system is "Unable to connect to the Synaptic Pointing Device Driver.
    I haven't installed another mouse, so I have declined uninstalling the driver, another dialogue box informs me that the "Windows (Vista) host process Rundll32 has stoped working", advising me that " a problem caused the oprogram working corectly" and that "Windows will close the program and notify you if a solution is available", the only option is then to Close Program.
    Although the mouse works, on the whole, I have lost the advanced scrolling and tapping features oft he mousepad, a bit disappointing in a Laptop lesst han a month old.
    Any suggestions? The Laptop did nto come with a Vista installation CD, should I have one? Can I re-install the driver? Is it available on the Toshiba website? What and where should I look?
    Many thanks to all and any who might be able to help.
    Toni M.

    OK, so it's probably not usual to answer oneself, and it may well be a sign of madness, but I have found a solution and wanted to share it, as well as prevent anyone wasting precious time replying.
    As I typed the question the old adage "the answer to a question may lie within the question itself" drifted into my small brain.
    It occurred to me that, as the Windows error messages pointed to a Driver problem, the simplest solution might be to search for one and and re-install it; so I found the Downloads > Vista Drivers > Synaptic Pointing Device driver, downladed and installed it, and Hey Presto! Back to scrolling and tapping-up for England!
    Goes to show the wisdom of the Hitchiker's Guide to the Galaxy, encapsulated in the legend on its cover:
    DON'T PANIC! :^0
    Thanks a million if you took the time to look at this and, if you have a similar problem, take heart, the solution is right here!
    TTFN!
    Toni

  • Screen not working and device not working properly!

    Npw im a careful person with mobile never had issues before 
    Earlier on in the day after just getting my phone today on contract with carephone warehouse i decided to do a little water test and take pics underwater , now the first thing i did was test the pressure of the device by going in the service menu  and when i did it with flaps totaly firmmly close the pressure , so i fought well there shouldnt be any problems if i put it in like 6 inches of  water in clean no redisidue sink ,now  i checked the flaps 6 times bettore putting in water ,now at first i was working fine taking the pics and that thne after 3 mins i pulled out then wiped it clean next thing i know the screen stop working and after the device wont come on proper ie no screen displaying ,now I bouught this because of the amazing battery life and camera now this isnt a cheap pone so it should hold up to what it says it can do , im very disappointed 
    I cant afford to have pay for \a new and its not my fault any help guys?

    thanls for the reply guys took it back showed and no water inside they swapped it for a new one justl ike that have another   problem now tho
    stockyvillage wrote:
    If on UK take it back to CPW and get them to exchange it.You could use the sale of goods act or consumer rights.

  • Applemobiledevice not working properly message

    Just downloaded the latest itunes. Every time I open itunes there's an "apple mobile device not working properly" message that continually pops up and it won't stop. I use Vista and have no clue how to stop it. Can anyone help?

    Take a look here:
    http://discussions.apple.com/ann.jspa?annID=640
    Selective startup info:
    http://support.microsoft.com/kb/310560
    Hope that helps.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • I have just upgraded to Lion and I now find that my VPN network does not work properly.  It worked fine with Leopard.

    I have just upgraded to Lion and now my VPN connection does not work properly.  It was working fine when I was using Leopard.  The VPN is My Private Network and we use it to link to BBC iPlayer when abroad.  It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site.  Any suggestions?

    Have a look at System Preferences, Accessibility, VoiceOver.
    (Command - F5).
    charlie

  • My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.  I uninstalled the program and reinstalled again but nothi

    my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but  it does not add any ebook either.
    I uninstalled the program and reinstalled again but nothing gone better-
    What should I do?
    Best regards

    Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
    Re: Everytime I close Itunes it loads back up

  • I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

    I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly.  The wireless light is blinking green very quickly and I connect and disconnect from the network constantly.  How do I get the router to work properly

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

  • OS Update/Connection to PC fails/ says device not installed properly???

    I connected my Playbook to my computer after the most recent OS update to back it up. Windows 7 ticked along and then said it could not install the device properly. Now with the Playbook connected I cannot get the Blackberry Desktop Software to work because the Playbook is not installed correctly.
    I went to the Device section in the control panel when the Playbook was connected and it indicates a RIM Network Device but doesn't let me delete to have it reset or whatever and when I troubleshoot it it says the device is working properly. But obviously it isn't. The RIM Network Device disappears when I disconnect the Playbook so I can't delete the device that way either.
    In addtion, in the past when I connected the Playbook, I got a drive designation for it. This time I don't.
    Any help would be very much appreciated.
    Thanks.

    As with most any electronics and software, reboots fix many things as it was made by humans and we do make mistakes.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Bootcamp 3.2: Microsoft Virtual WiFi MiniPort Adapter shows "device is not working properly...Code 31"

    Using Windows 7 Enterprise 64-bit, Microsoft Virtual WiFi Miniport Adapter shows the "device is not working properly because Windows cannot load the drivers required for this device. (Code 31).".The device is the Apple iMac10,1 All-in-one computer. Right clicking browse files (for the device) shows the Bootcamp (C:), DVD (D:); and my external hard drives can be selected.
    Internet and WiFi connections all working ok. Am also running MacDrive 8 to access the Mac drives when in the Windows partition, again without any seeming issues.
    Updating the driver simply generates another Code 31 error.
    Appreciate this seems to be a known problem - is the a solution a novice use might be able to follow or should I simply ignore the error message?
    Driver Date us 21/06/2006 and Driver Version is 6.1.7600.16385.

    Hi  ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 4-1204tx Ultrabook and issues with WiFi adapter is not working properly. Error codes in Device Manager in Windows  8.1 could be fixed by deleting any extra drivers. So I would uninstall all that is listed in the Network drivers in the Device Manager, restart the Notebook. Here is a list of Device Manager options, this might help.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating or reinstalling. Hope this helps. Thanks.

Maybe you are looking for