Connect directv receiver to watch on iMac

I just got an iMac and I'm new to apple computers, except for my iPhone. I had a Windows Media PC connected to a DirecTV Receiver in my office such that I could switch and watch DirecTV on the Computer. Is there a way I can do this with my iMac. The receiver is HDMI capable, so I'm sure it's a cable and maybe software, just not sure how to do it!
Thanks,
Tracy

You would require 3rd-party hardware/software solution such as the ElGato EyeTV HD.

Similar Messages

How to set up connection for directv receiver, TV, and home theater system?

Can some one please show me the CORRECT way to connect my Directv receiver (it has no HDMI), Panasonic Viera HDTV (has 3 HDMIs) and my Samsung home theater HT-Z510 (has 1 HDMI)? The second question is with the set up that you advise, can I play the TV sound through my home theater speakers? and How do I do that each time I want to listen the TV sound through my home theater speakers? I am new and confused about all this so please provide or explain step by step please. Thanks in advance.

Making sense of your connections on a message board is never easy. Hopefully you can piece this information together.
Direct TV box to Panasonic TV using S-video cable....assuming it's standard definition. Component video if the box is HD. Run standard stereo RCA cables to the appropriate input for sound threw the TV speakers.
Your Panasonic TV will have a set of stereo(left/white,right/red) outputs. Run cable from that output into the same inputs on the Samsung surround unit. Use the sound units effects to acheive simulated surround. This is assuming you have no digital outputs on your box. If you do, you'll be able to get 5.1 when available using a digital connection.
Good luck.
Disclosure: Former BBY employee.

HT201320 Unable to step my outlook account keep getting warning unable to verify account I can send and receive mail on my iMac using the outlook account HELP

Unable to setup my ipad for my outlook account I keep getting the message unable to verify, although I can send and receive mail from my iMac using the same outlook account.

Confirm you did this: https://support.google.com/mail/answer/1173270?hl=en
You might also try removing all gmail passwords from your keychain in Keychain Access. Then connect again and enter the password code given by Google.

Having problem with gmail smtp server. Since going to google 2-step, and entering 16-digit code in gmail account, I can receive mail on my iMac, but cannot send. What do I do?

Having problem with gmail smtp outgoing server. Since going to google 2-step, and entering 16-digit code in gmail account, I can receive mail on my iMac, but cannot send. I keep getting an error message that Mail "Cannot send message using Gmail (my assigned name) server." What do I do?

Confirm you did this: https://support.google.com/mail/answer/1173270?hl=en
You might also try removing all gmail passwords from your keychain in Keychain Access. Then connect again and enter the password code given by Google.

Cannot receive emails on my IMAC

I cannot receive Email on my IMac, when I try to connect the internetaccount to my gmail account, it is not possible

sounds like your
imap or pop3 or Exchange settings depending on your mail provider
are setup wrong
or that your firewall or wifi routers firewall are blocking the ports
used by the mail recieving service

TS3276 Mail is not receiving messages on my iMac.

Mail is not receiving messages on my iMac. I can send messages but not receive. My MacBook Pro receives OK. What can be the matter?

I sorted this out in the end by playing around with Connection Doctor

How do I connect my Xbox 360 to my iMac

I want to use my imac as a TV so i want to know how to connect the xbox 360 to my imac.
Thank you for your support

What iMac model do you have ?
The 2011 ThunderBolt iMacs only work with other ThunderBolt Macs Thunderbolt 10.6 Help: Using another Mac as an external display
For the 2009 and 2010 27" iMacs with Mini DisplayPort you would need something like the Kanex XD http://www.kanexlive.com/xd
The Kanex XD is not compatible with ThunderBolt iMacs.
Stefan

How can I connect my TV sony bravia to Imac for display !

How can I connect my TV sony bravia to Imac for display ! I did it before but a week ago crash my sistem and been to apple store london to fix it and wend I come home I can not reconnect the tv to imac ! please help !!!!!!!!!!!

I BUY A CABLE FROM AMAZON.CO.UK AND MY iMAC WAS WORKING WITH THIS CABLE BUT AFTER THEY (APPLE STORE REGENT STREET ) REPARIT NOW IS NOT RECONICE THE DISPLAY !!!!!

How do I get windows to connect to the internet on my iMac

How do I get Windows 7 Home Premium to connect to my existing internet connection, on my iMac (Lion 10.7.3)? The installation of the Windows 7 using Bootcamp went fine, up to the point of getting connected to the internet. My iMac side of the partition connects to the internet just like it always did.

You should ask this in the boot camp forum.
You will probably get more help there.

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

Why is wireless router connectivity is different with Powerbook than iMac?

I had problems with my 10.2 on the G3 450 iMac (that caused me to go to 10.3 about 2 weeks ago), my trusty old Buffalo router fried its WAN port. I replaced it with a Netgear unit, then a Linksys unit, now I'm back to Buffalo. The ongoing problem is that the laptop has a heck of a time connecting to the internet - while the iMac (via ethernet) has no problems whatsoever. It doess/did this with every manufacturer of routers I tried (since first I thought it may be a Netgear incompatibility issue).
Strange part about the problems: Only initially does it spend 20+ seconds (close to Safari/Firefox timeout) "looking for" the host. Once it has found it, if you click on any links within the same host, it's lightning-fast. Just the initial callup seems to be inordinately difficult. I was hoping new firmware for the wireless modem, 10.4, the latest Airport update etc would alleviate the situation - no such luck. It USED to work fine on the old wireless router ... Also, it does this "looking for" business whether I have security enabled or not (I usually run 128bit encoding).
I don't really mind waiting for a few seconds for a site to load, but when you're talking about something like Yahoo or ESPN, all these independent advertising servers have to be contacted to load the page and - you guessed it - it's a 20+ second delay for each one...
I've rebooted the router and the laptop many times; I doubt it's the cable modem as the Ethernet on the iMac comes from the same router an doesn't have a problem at all. Any chance it's a setting of some sort in the preferneces panels?
The problem appeared initially with the Netgear router. The whole reason I went back to Buffalo is that I never had any issues in the 4 years I owned the previous one (until the WAN port went out). I also tried a Linksys router but admittedly didn't spend a lot of time with it as the delay problem appeared right from the start.
As far as 3rd party hardware is concerned, I wouldn't mind just getting an Apple Airport station at this time, but really don't want to spend the $ if it's an issue with either the laptop or its Airport card. I guess I could get one here at the local Apple store and bring it back if it doesn't work any differently (at least then I'd know it's either a laptop or a Comcast Cable-issue...).
System setup:
Desktop: G3 "Graphite" iMac / slot-loading / 400Mhz / 640MB RAM / 10.3.9
Laptop: 15" G4 Aluninium Powerbook / 1.25Ghz / 1GB RAM / 10.4.6
Wireless: Buffalo AirStation Turbo G WHR-HP-G54 (wireless to laptop / ethernet to iMac).
Powerbook 15/1.25GHz/1GBRAM Mac OS X (10.4.6)

It sounds as though you're having a problem with DNS lookups. Try this, type into Terminal (Applications > Utilities)…
sudo lookupd -flushcache
It will subsequently ask you for your administrator password. Type it in and then wait for the prompt to return. Do not do anything before then. Now, restart and see if things are any better.

I have connected the adapter and cable from imac to GVA HD tv but nothing seems to be happening.

I have connected the adapter and cable from imac to GVA HD tv but nothing seems to be happening. Any suggestions?

Was that message showing a s dialog when selecting the tv connection as a sound output device? I ask because I don't know the exact context of that message and never heard of it before.
It may be helpful to take a screen shot of both that message and also the list of the sound output devices while the tv is connected.
You never specified your model (year) of your imac so I don't know its limitations. Maybe some version doesn't support sound through the mini-displayport (hard to believe any model wouldn't with mini-displayport). But if that is the case you may have to resort to analog stereo from you stereo line out output jack to your tv.
One final thing. The mini-displayport adapter you have may not support audio. That was a possibility a few years ago. That is why most places that sells these things also explicity specify whether the adapter supports audio. For example, monoprice's adapter:
Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support
or even the Moshi adapter sold through the apple store.
Moshi Mini DP to HDMI Adapter with Audio Support
Note both these adapters explictily say they have audio support.

23" Cinema Display hook up to DirecTV receiver?

I have tried hooking up my 23" Cinema display directly to my HD DirecTV receiver. My DirecTV receiver has HDMI output. So I bought a HDMI to DVI adapter. I was not able to get a picture on the display. The monitor was continusly flashing the power LED three consecutive times. My DirecTV receiver supports these resoultions: 480i/480p/720p/1080i. Is it a resolution problem?
Should I be able to do this? I thought that LCD displays could be used as a TV monitor? Am I wrong in this assumption?

There are two big barriers to this working. One is that the DirectTV box's output is likely protected by HDCP. The ACD can't perform the required HDCP handshake and so the DirectTV box will not output a signal.
The second problem is that Apple's displays have an architecture that is unique in the world of monitors. They don't have conventional multi-sync capabilities and can only work from one fixed format, fixed frequency resolution. They can't run from ATSC compatible signals like the ones you listed.

Trying to connect my iPhone6 with my old iMac with 10.6.8 MacOS. It says I need a new version of iTunes. When I try to upgrade the iTunes (11.3.1), it says, it is already the latest version. What do I do now?

Trying to connect my iPhone6 to my old iMac with 10.6.8 MacOS, and synch up the music. It says I need a new version of iTunes. When I try to upgrade the iTunes on my iMac, it says, it is already the latest version. What do I do now?

The current version of iTunes is 12.x.x and requires OS X later than Snow Leopard.

How to connect xbox 360 to the newest iMac 21'5?

How to connect xbox 360 to the newest iMac 21'5?

So if I connect my Xbox thru adapter like that one ( http://store.apple.com/us/product/H3983ZM/A ). It will work?

Connect directv receiver to watch on iMac

Similar Messages

Maybe you are looking for