Connect ECC 6.0 with EP NW04, BW NW04 and CRM 4.0

Hello All,
We have R/3 Enterprise 47 x 200, we have connected to it the EP version NW04, BW version NW04 and CRM version 4.0 so, we need to upgrade only the R/3 to the new ECC 6.0 without upgrading the other components.
My questions is if anyone knows if, Is it possible connect those old version to the new ECC 6.0 and where can I found this information?
I was looked into marketplace, help.sap and in this forums but I didn't found anything so if you can help me to solve it, I will be very grateful.
Thanks in advance,
Alfonso

EP6.0 will work perfectly fine with ECC6 but as previous posters have pointed out, technically its not a supported landscape.
You would have little problem with simple transactional, BSP access etc but you would need to be careful about the use of any business packages you might want to use. You would need business packages appropriate to the backend version you have (particularly for ESS/MSS) and then you would need to validate whether they actually work with EP6.0.
Bit of risk as its not supported.
Haydn

Similar Messages

Can't connect to our wifi with my laptop, but pc and iphone can!

All devices (my boyfriends pc and my iphone and ipad) can log into our new wifi network except for my macbook pro. I can connect to any other wifi like the starbucks or our neighbors network, and all different hotel networks. I've never had a problem connecting with this laptop and have had it for years. Apple says it's comcasts, comcast says it's apple. I've spent hours on the phone with both and neither has solved the problem. HELP please anyone. I feel so constrained with this ethernet cord! And I don't want to get a new laptop just to get wifi.
I've reset the modem, I've changed login and password info, I've been on the phone with apple clearing out all my network history etc...
Thanks in advance to anyone who can offer some help.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

DVI/HDMI connection for Thinkpad R61 (with IBM 2504 Docking station) and Samsung LNT4665F LCD TV

I am trying to connect my laptop (Thinkpad R61) with my TV (Samsung LNT4665F) using a DVI/HDMI cable. Because the R61 doesn't have a DVI port, I am using it in the IBM 2504 Docking station. I have docked the computer, connected the DVI/HDMI cord (using HDMI in 1 on the TV, which I believe is the only DVI accepted HDMI on the TV). I followed the Samsung instructions to then hit "Fn-F7" on the laptop. Unfortunately, nothing is happening. It doesn't appear that any signal is pushing out to the TV.
I am not very tech savvy. Can someone please tell me what I need to do?
Thanks for your help.
Brian

lead_org wrote:
if your R61 uses an intel GPU, then it won't support the dvi passthrough port on the dock.
The 14" models with intel GMA have DVI pass through.
@ bweisy, welcome to the forum,
Which model R61 do you have? Could post the Type and Model Number Please do NOT post your s/n.
Thanks
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Connect my Arch pc with a Windows 7 laptop and use it remotely

I want to manage my pc, which has Archlinux installed from a Windows 7 laptop when I'm in the faculty. I have installed rdesktop following the Wiki instructions (https://wiki.archlinux.org/index.php/Rdesktop).
To know the IP address in the windows laptop, I use
ipconfig/all
in the system symbol konsole, and I get the following address:
I have used the following line in my Archlinux pc to connect both computers:
$ rdesktop -g 1440x900 -P -z -x l -r sound:off -u windowsuser 192.168.0.11:3389
And after a seconds, I got this message:
Autoselected keyboard map es
ERROR: connect: Expiró el tiempo de conexión
What am I doing wrong?Is there any steps I haven't done?
Thanks and sorry for my English.

Your first sentence implies you want use a windows machine to administer arch.
Assuming you actually want to use your arch machine to run windows, have you enabled remote desktop in windows, and given your user permission to connect remotely?
Also, when I last did this, I had to use the "less secure" Remote Desktop option in Windows, or use an unofficial rdesktop fork that supported NLA.

Error when connecting an oracle DB with Integration gateway

I followed the steps from the blog How to connect an Oracle DB with Integration Gateway in SMP3 and the ojdbc was deployed successfully to SMP. Still, i'm getting "Driver class oracle.jdbc.driver.OracleDriver not found" error message when i try to test my connection. The first difference i saw when completing these steps was that I'm using SMP3 SP05, could this be the issue?

Joao D Franco Net
Could you share below information:
Can you cross check if deployed driver are OSGi enabled? Refer this.
Can you share screenshot of the destination settings and error ?
note: The blog you followed is referring to SP03 (1st GA of SMP3)..You should not have any problem in connecting to Oracle DB being on any SP.
Regards,
JK

Need Help Connecting New MacBook Pro with Wireless Network Password

Hi Linksys Community,
I would like to ask for your help and advice.
I recently purchased a new MacBook Pro, OS X, Version 10.8.3.
I need to setup a password to the wireless internet network (I've successfully done this)
I have a Wireless G, WRT54G Router.
When I setup the password, I'm not able to connect to the internet with my new MacBook Pro, which is running Mac OS X Version 10.8.3. I get the message 'cannot connect to Internet, connection timeout) However, I'm able to connect to the internet with an older MacBook Pro, and my iPad. The password works fine with other models.
Would anyone be able to help me troubleshoot what is going on, or how I can solve this problem?
I would like to be able to have a password on my network, and use the internet with my new MacBook Pro.
I have read about manually adding in the MAC address of computers, and setting up a Wireless MAC fiter.
Does anyone think this would solve the problem? if so, how can I find out the MAC address of my MacBook Pro?
Thanks in advance for you help and time!

Hi,
Thanks for your response.
Yes, my computer connects when your network is open (no password set)?
I used WPA Pre-Shared Key.
Do you know how I could check if my new MacBook Pro is compatible with this?
Thanks!

With Crystl32.ocx Error 20599 and 20000

Hi all,
first of all Im working with VB6, CR8 and SQL 2005; we still work with the old Crystl32.ocx to generate some reports, and seems that some clients have issues with the Reports that have subreports in it; as example I have one report with 13 Subreports in it; our client reported an error, the "Error 20599 - Cannot open SQL Server", so I tought that the subreports had to connect too; As soon as I tried this:
With MDI1.CrystalReport1
        .ReportFileName = "C\:"Epi.rpt"
        .Connect = "DSN:myDSN;Trusted_Connection=Yes"
        For i = 0 To .GetNSubreports - 1
            .SubreportToChange = .GetNthSubreportName(i)
            .Connect = "DSN:myDSN;Trusted_Connection=Yes"
            .SubreportToChange = ""
        Next i
    End With
to connect my subreports, the client and locally reported the "Error 20000 - No Error";
is there any help paper for that error?

Ok,
1- I tried your code for "Using a Trusted connection or Integrated Security with the OCX at runtime" and leave it like this
    With MDI1.CrystalReport1
        .ReportFileName = "C:\Epi.rpt"
        .Connect = "DSN=myDSN; UID = ; PWD = "
    End With
and didnt work.
2- I just realized that I had an ODBC called myDSN, I renamed it and boom "Error 20599 - Cannot open SQL Server"; now somehow Im happy with this, now I can test it locally, but still I dont know what to do from here.
Thanks for replying.
PD: Also I tried the RPT
     - without any SubReport, it worked 100%
     - 2 SubReports with only formulas in it, it worked 100%
     - 2 SubReports with only formulas in it and 1 subReport with tables in it, it failed 200%
so it seems like connection is not propaging or Im doing it in the wrong place?
Edited by: Rawl Ocana on Oct 21, 2009 11:40 PM

Connect BI 7.0 with ECC 5.0

Hello all,
I don't seem to succeed when trying to connect my BI system with my ECC system. I have followed the best practices document "BI Connectivity" step by step, but I still get errors.
When performing a connection test from BI - SM59 (one of the two "test" buttons in SM59) I succeed. However, when trying to logon remotely (the other test button) to the ECC, nothing at ll happens.
When performing a connection test from ECC - SM59 I fail ("Error opening an RFC connection"). Also, when attemting to logon remotely to the BI system, I fail ("error opening an RFC connection").
What should be done here? Any ideas?
Thanks,
F C

Please don't post the same question at multiple fourms:
connection BI 7.0 - ECC 5.0
Close any one of them.

Is SAP BI reporting is possible in ECC 6.0 with same client

Hi all,
                         My requirement is, we need to design SAP BI data flow in ECC 6.0 with same client only. Now I am designing the BI data models as per the requirement of SD sales reports in ECC 6.0.For this, when i was extracting the data from SD datasource(2lis_11_vahdr) in RSA3 its showing 0 records,actually as per VA01 some records are available but its not showing in the RSA3.
                          My doubt is , is it possible to extract the data from ECC 6.0 and load the data to the datatargets and get the SAP BI reports in ECC6.0 with the same client.
                          Please suggest as soon as possible.
Thanks

It is possible to load the data from the same client. It all depends on the source system and the client which has been connected in the RFC connection.
Let me know if this helps.
Regards,
Avinash

Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?

hello,
I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
If I can't is there any proof about it? I have to show it to a client.
Best Regards,
Pablo Mortera,

Pablo,
GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
Regards,
Amol

Crystal Report against ECC 6.0 with SSO configured

I created a simple report against the ECC 6.0 Article table and saved it to InfoView. I can run the report fine, but when others run it they get an error stating the logon parameters are incomplete. We are in the process of configuring single sign on and have created other Crystal Reports going against ECC 6.0 with Business Views where SSO turned on in the data connection. Everyone can refresh those reports with no problems. Is their some report setting that needs to be set for Crystal Reports using a data source directly against ECC 6.0 tables?

We have multiple reasons for implementing SNC.
The main reason we have enabled SNC is to simply the users experience while working in the SAP environment. We are going live this month with Plant Maintenance, SRM, Project System, General Ledge and Asset Management reporting cubes in our BW environment as well as in our ECC 6.0 environment. We have set up SAP Portal and have created iviews to BOBJ folders and reports. Users are authenticated once by logging on to the Lan. Once logged on we would like them to seemlessly run SAP transactions and Business Objects reports through the SAP Portal based on their job function. Each user has security setup in BOBJ and SAP to allow access to transactions and reports appropriate for their job function.
We have three types of SAP reports and data connectors.
- One set of Crystal reports go against ECC 6.0 through Business Views with a Data Connection set up for SSO.
- One set of WEBI reports goes against BW queries though Universe Connections set up for SSO.
- One set of Crystal reports go directly against ECC 6.0 tables.
We currently have two issues:
1) The Crystal reports going directly against ECC 6.0 tables are returning the error
Error - The database logon information for this report is either incomplete or incorrect.
2) When we send a link to any report using OpenDocument if the user is not logged on to InfoView they get a rather long error message:
Account Information not recognized: Active Directory Authentication failed to log you on. Please contact your system admin....
Our hardware and server setup is a load balancer connected to a cluster of two Tomcat servers connected to two BOBJ servers.

Connect one Business system with two Integration Server

Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.

Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

I tried to connect SAP BW7.0 with use Jco2.1.7...

I tried to connect SAP BW7.0 with Jco2.1.7(64bit Itanium) in Microsoft Windows 2003 on IA64 and x86_64 with SUN JSE 1.4.2 (64-bit VM).
But I got error as followings.
java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [no sapjcorfc in java.library.path]. java.library.
path [C:\fds2\jrun4\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WI
NDOWS;C:\WI
what's wrong?
one more question
What is the "Microsoft C runtime libraries version 7"?
Message was edited by: kooknam han

Hi,
I think it's not possible to create a Universe directly on ECC 6.0.
You need to use a Data Federator for this to work. A Data Federator view is created on top of the ECC source using the connector then you can create Universe on top of Data Federator.
Check the below for more info on the same.
SAP BusinessObjects Web Intelligence Reporting for SAP ERP
Data Federator Installation Guide:
http://help.sap.com/businessobject/product_guides/boexi3SP1/en/xi3_sp1_df_install_en.pdf
User Guide on Data Federator:
http://help.sap.com/businessobject/product_guides/boexi3SP2/en/xi3_sp2_df_userguide_en.pdf
Hope it helps.
Regards,
Raghu

Troubles trying to connect ECC and XI through RFCs

Hi,
I'm trying to connect XI and ECC through HTTP RFC connections. The bridge between XI and ECC is OK, but the bridge between ECC and XI is not working. It results in the error above:
Service cannot be reached
What has happened?
URL http://brjgs916:8001/sap/xi/engine call was terminated because the corresponding service is not available.
Note
The termination occurred in system XD0 with error code 404 and for the reason Not found.
The selected virtual host was 1-.
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:P-i:brjgs916_XD0_01-v:1--s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Trying to teste the service root
default_host\sap\xi\engine and received the error message "Could not find host or port information". Looking at SMICF the services are functional and seams to work (green checks at right side) in both sides, ECC and XI.
Some one knows what happens and could help me?
Thanks

Hi,
>>>>I'm trying to connect XI and ECC through HTTP RFC connections
>>>>Troubles trying to connect ECC and XI through RFCs
what exactly are you trying to do?
connect via ABAP proxy (HTTP) or via RFC ?
if via proxy:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
if RFC:
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

Connect ECC 6.0 with EP NW04, BW NW04 and CRM 4.0

Similar Messages

Maybe you are looking for