Connect ECC and BI
Hi i have installed ECC and BI on two different virtual machines on a single machine.
I want to connect them so that i can test extractors .
Please tell he steps in details.
thankyou
See step=by=step procedure to create SAP ECC source system in SAP BW system in online docu:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ac/4a4e38493e4774e10000009b38f889/content.htm
Do not forget to replicate your datasources. try to build up data flows up to report and enjoy all the beauty of SAP BW.
Similar Messages
-
Is there any document to connect ECC and Netweaver CE 7.1
as subject...
i cound't find any document to connect ECC and CE 7.1 EHP4?
is there anyone how know any link?
thanks...I want to publish all enterprise service in ECC6.0 to ESR
but i cound't... now the error occured in below...
SM59 -> SAPSLDAPI -> Test connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: 连接 SAP 网关失败。启动 SAP 网关了吗?
Error Details LOCATION: SAP-Server aspnbp_YBP_01 on host aspnbp (wp 0)
Error Details COMPONENT: CPIC
Error Details COUNTER: 11
Error Details MODULE:
Error Details LINE:
Error Details RETURN CODE: 236
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Tue Jun 07 02:35:50 2011
Error Details VERSION: -
Troubles trying to connect ECC and XI through RFCs
Hi,
I'm trying to connect XI and ECC through HTTP RFC connections. The bridge between XI and ECC is OK, but the bridge between ECC and XI is not working. It results in the error above:
Service cannot be reached
What has happened?
URL http://brjgs916:8001/sap/xi/engine call was terminated because the corresponding service is not available.
Note
The termination occurred in system XD0 with error code 404 and for the reason Not found.
The selected virtual host was 1-.
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:P-i:brjgs916_XD0_01-v:1--s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Trying to teste the service root
default_host\sap\xi\engine and received the error message "Could not find host or port information". Looking at SMICF the services are functional and seams to work (green checks at right side) in both sides, ECC and XI.
Some one knows what happens and could help me?
ThanksHi,
>>>>I'm trying to connect XI and ECC through HTTP RFC connections
>>>>Troubles trying to connect ECC and XI through RFCs
what exactly are you trying to do?
connect via ABAP proxy (HTTP) or via RFC ?
if via proxy:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
if RFC:
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
I want to connect ecc 6.0 server and SOLMAN server together
Hello All , I need your help please ,
I`m working on ecc 6.0 on windows server 2008 R2 and i want to upgrade some components via EHPI ,
So after reading i reached that I need to install SOLMAN on another seperate server to generate the XML stack files for EHPI from t-code " mopz " .
I`ve installed the SOLMAN on another server " windows server 2008 R2 " , and succsesfully finished .
Now i have two seperated servers one for ECC and the other one for solution manager 7.1 .
NOW I NEED to connect the two servers together to let them see each other .
How Can I Connect them together Step by step Please ???
Hope to help Immedietly And thnx in advance.Hi Rami,
Once the basic configurations are done. It will be just 30 minutes sufficient to complete the connections between Solution manager and ECC 6 system.
http://help.sap.com/saphelp_bpc70sp02/helpdata/en/83/47421d68ea497fb7b813e17843122d/content.htm
Above link for the same.
You should create ECC system in solution manager as below link
http://help.sap.com/saphelp_bpc70sp02/helpdata/en/45/56dd10b5f62a50e10000000a11466f/frameset.htm
Set SUser id to solution manager which comes under the basic settings.
http://help.sap.com/saphelp_bpc70sp02/helpdata/en/45/56dd10b5f62a50e10000000a11466f/frameset.htm
Maintain SAPOSS RFC connection, hope you have an SAPROUTER setup for your company.
Please let us know if you are facing any issues.
Thanks
Jaianandh V -
RFC connection BI and ECC 6.0
Hi
I am trying to connect BI and ECC 6.0 at home on two different virtual machines for data extraction and practicing delta management ( they are on the same virtual network).
I am following these steps :
Step-by-step procedure to connect BI with ECCu2026
Define the logical system in R/3 using the transaction code SALE in both the systems (ECC and BI)
Assign Logical System to a client using transaction code SCC4 in both the systems (ECC and BI)
Setup the RFC Destination using transaction code SM59 in both the systems (ECC and BI)
Hit Transaction BD64 and Click Create model view - Enter the Short text u2013 Enter the Technical name u2013 Hit Execute - Distribution Model will be created and the technical name of the distribution model will be listed
Place the cursor on model created and and click Add message type button on the top right corner
Enter sender and receiver system IDs and select the correct message type assigned to the correct system
Distribute this model using Edit u2013 Model View u2013 Distribute
Select the receiver of the model view and proceed to distribute the model
Please note that the distribution of data model is not required to repeat in BI system as this step automatically replicates settings in BI
You have to generate partner profile for each system with which your system communicate using BD82
Outbound records are created in the partner profile for each outgoing message and inbound records are created for each incoming messages
You can view the partner profiles generated using the transaction code WE20
Message Types:
RSRQST: This message type is send by BI to R/3 while loading any data. This gives information about the data source, selection condition and other BI settings to R/3. As and when a load is started in BI, RSRQST message type is sent to R/3 requesting for data.
RSINFO: Once R/3 receives RSRQST message from BI, it sends an acknowledgment message type to BI informing about the status of the request. That is whether the request can be handled or not by R/3. It also gives information about how many data packages are being send and what is the total number of records extracted for the given data source and selection.
RSSEND: After sending a positive acknowledgement to BI, R/3 starts the extraction job and starts collecting data in data IDocs. This message type carries the actual data with it into the BI system.
My question is that : Do i know need to create three model views for these three message types?? Are these steps sufficient?
Please let me know if some other things needs to be followed or U know more simpler way to RFC connect so that I can pull data from ECC into BI and practice delta management.
Thanks
Edited by: max.sap on Apr 28, 2011 8:24 AMHi Niru,
Have you created a
[RFC destination in NW Administrator?|http://help.sap.com/saphelp_nwce10/helpdata/en/5a/97a066223e440b8ead3da027b17d9e/frameset.htm]. Have you created a [BI System connection?|http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm]
Best regards,
Dharmi -
No connection between ECC and PI
Hello,
I have developed proxy to file interface but I am not able to see any data flow between backend ECC and PI systems. I have gone through different blogs and forum threads to troubleshoot... creating RFC destinations, testing through RWB message, SLD configurations, SICF, etc. but I am not able to see any data going out of or into ECC. When I check SXMB_MONI or RWB message monitoring, I don't see any message either failed or success.
I don't think ECC is connecting to PI. I am able to create proxy in ECC and configure both inbound and outbound proxy but I don't see any data go through ECC. I am able to import RFC and IDocs in Integration Repository. Can anyone suggest what could be the problem and how to resolve it?
Thank you!Hello,
I created a new test interface - File to RFC and tried to test it by sending payload from RWB and got the following error. I already checked that the host file has the server name and IP address entries.
Adapter Framework caught exception: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=HOSTNAME SYSNR=30 GWHOST=hostname GWSERV=sapgw30 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '192.168.131.3:sapgw30' not reached TIME Mon Sep 26 13:51:26 2011 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3133 DETAIL NiPConnect2: 192.168.131.3:3330 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 2
Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=hostname SYSNR=30 GWHOST=hostname GWSERV=sapgw30 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '192.168.131.3:sapgw30' not reached TIME Mon Sep 26 13:51:26 2011 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3133 DETAIL NiPConnect2: 192.168.131.3:3330 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 2 . -
Hi folks,
i would like to see ECC and SCM scenarios connected by CIF, how ever HU2(ECC) and HU8 (SCM) systems are not interconnected. let us know whom do we need to contact in this regard.
Thanks in Advance ...Hi Amit,
The ES (emphasis on Enterprise Service or Web Service) Workplace Systems are actually setup for customers or consultants to test drive SAP delivered Enterprise Services, so it stands to reason that integration between these systems would be using web services / SAP Enterprise services for the most part.
Trying to contact someone to configure CIF / ALE integration between HU2 and HU8 is not going to work for you.
Regards, Trevor -
Communication between ECC and CRM
Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-VishalHi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal -
Organization structure in CRM 7.0 from ECC and HR
Hi,
We are trying to download Org structures from ECC and HR. (CRM 7.0, HR & R/3 ECC 6.0)
From HR
The ALE distribution is set across the systems CRM and HR and I did the PFAL run as per the best practices BB C05. There are about 100,000 Idocs inbound to CRM system and out of which about 15K are in 51 status and the rest are in 53 status.
Observations:
The Organization structure from HR is not totally mapped in CRM but only a part of it is displayed in PPOMA_CRM.
The remaining Org units are found in 'non-related objects' selection.
All the Idocs in failure are in error "Error in subroutine read_namtb for structure of infotype ". When I go to the long text
Message no. 5-109
Diagnosis
An error has occurred in subroutine read_namtb for structure of infotype .
Procedure
Check the entry for infotype in table T777D (structure, IDoc segment, expanded structure) and the corresponding structures.
I am not sure which infotype needs to be checked in T777D.
From ECC
The CRM - ECC connectivity is set. Downloaded all the required customizing objects successfully. Switched the org model to "enhanced backend integration version " and then followed on to SPRO->CRM->Master Data->Organizational Management->Data transfer->Copy SAP ECC structure and selected all the available R/3 Organization assignments available and then selected the "generate selected lines".
Observations:
All the generated org units are in GREEN in SPRO but there are no assignments found in PPOMA_CRM not even in the unrelated objects
Checked tables HRP1000 and HRP1001 from the CRM Sales org unit IDs (ex: O 5000012) created here and they are not found but the generation is in GREEN.
I will appreciate any assistance I get here.
<< Moderator message - Everyone's problem is important >>
Regards,
DT
Edited by: Rob Burbank on Oct 20, 2010 4:25 PMHello DT,
Could you please let me know the process how the problem is solved..
even we are having the same issue like, we have downloaded the Org Model form HR to CRM system, till here it was fine.
when we are trying to download the ECC sales structure(CRMC_R3_ORG_GENERATE) to CRM system, i have selected all the items and triggered the Gerenerated Selectd Lines, but after all the items are generating in a error with RED.
Could you please share you knowledge, so that it will help me in figuring out the issue.
Thanks in Advance DT. Hope you reply back.
Regards,
Ven -
Communication between ECC and SCM via XI
I am trying to set up the scenario 'Purchase_Order_Processing' between
ECC and SCM using XI. The SCM content for XI has been loaded into XI
and this scenario is included in the content.
We are running the following:
ECC - Version 5.0 - 640 SP level 12
XI - Version 3.0 - 640 SP Level 14
SCM - 4.10 - 640 SP Level 12
The connectivity between the systems has been set up as described in the configuration guides. On sending an IDOC (basic type ORDERS05) into XI I get the following error message 'Http server code 500 reason Internal Server Errorexplanation Error during parsing of SOAP header'.
The Error XML is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 500 reason Internal Server Error
explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any assistance would be much appreciated.Sravya,
Yes this an IDOC to http scenario. There was no dump at the receiver end. I've found out what was causing the problem - I was using an adapter type of HTTP. It should have been of type 'XI'. I've altered this and it works. Hopefully this will resolve your problem Vinod.
Richard -
IDOC type for interface between SAP ECC and SAP F&R
Hi Experts,
I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
Please help me in finding the idoc type?
Regards,
KrishanHi Denish,
You have 2 ways of loading data from R/3 to APO.
1. R/3 to BW cube to APO-BW cube to APO planning area
or
2. R/3 to APO-BW cube to APO planning area
BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO. -
ALE configuration in ECC and 4.7
Hello guys
Is there any difference in ALE configuration in ECC and 4.7??Summarised step follows below...
ALE settings for IDOC
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Also read this blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a>.
Do a SDN serch and you can get a lot more that this
~SaNv... -
How to connect ECC 5.0 system from EP?
Hi
I want to connect ECC 5.0 system, which is located in a remote SLD, from EP 6.0.
If anyone knows, please post the step by step details .
Thanks and Regards,
Abdul Kareem.SHello Abdul,
This should help you
How to connect IDES ECC 5.0 to EP ?
Also check
http://help.sap.com/saphelp_nw04/helpdata/en/77/931440a1c32402e10000000a1550b0/frameset.htm
regards
Mahesh -
Issues on Sources System ECC and BI
Dear Friends,
I m trying to get datas (extractions) from ECC 6.0 QA 110 to BI DEV 100. But I only have the Source System to the ECC 6.0 DEV without any data, this connections is working very well. I asked the Basis Consultant to do another connection of the BI DEV 100 with the ECC 6.0 QA 110 using RFC connections with Bitemote with sapall, between ECC and BI. He already did it and I can see at SPRO under SAP NetWeaver > SAP BIW > Links to Other Systems > General Connection Setting > Assign Logical System to Client, on both sides in BI and ECC. The question is, do I need to do Any configuration at the BI side to active (create?) this new Source System ECC 6.0 QA 110? I hope Im clear. Thanks in advance.
AntonyHi Frank,
I can't imagine any issues compared to other installations. The only thing you need to take care about is that in BI you can only work in one client and in your ecc system you can have multiple clients to work in. These will be treaten as different source systems for your bw.
regards
Siggi -
Mapping table for contact person download from ECC and Groupware
There are 3 connected system in our landscape:
- CRM
- Groupware (connected to CRM)
- ECC
We have a requirement that the Contact Person can be created in any of the above 3 system and should flow to the other. So, the below scenarios are valid in our case:
1. Contact created in Groupware, flows to CRM ->ECC
2. Contact created in ECC flows to CRM-> Groupware
3. Contact created in CRM flows to Groupware and ECC
Our flow system works fine and the contacts created in one system, flows to the other 3 and any changes also flow.
The problem is that for the contacts created in ECC, the communication data (phone, email etc) flow in CRM and get updated in the "Work Address" section in the Contact display screen in Web UI and the updates from Groupware for communication data gets updated in "Main Address" section.
Can anyone please advise what are the mapping tables for the address update when the contact is created in :
- Groupware/CRM
- ECC
RegardsHi Christophe,
Thanks for the response.
I checked for the notes you suggested, but having read it it doesnt appear to address my problem. Did you get this from SAP as fix to solve' specify the name of contact person' error in SMW01 ? Unfortunately even SAP isnt replying to me on this.
I am also not getting any dump, all my queues are getting cleared in ECC and CRM. My error remains 'specify the name of contact person'. Interestingly when i tried to push the contact person directly as bupa_main..it too failed with the same error..more interestingly whenver my contact person tried to get replicated as bupa_rel..ecc does eat up a number assignment..but no record is created for it in ecc...the smw01 says partiaslly send ..receivers has error..
Edited by: Hamed Kazi on Apr 19, 2011 2:33 AM
Maybe you are looking for
-
sorry cant think what details you may require, the problem is simply that I had bookmarks and when I upgraded to the latest edition of Firefox they were gone. I understand this is a common prob. and if i only knew what the devl I was doing i'm sure i
-
Ubuntu 15 openjdk version "1.8.0_45-internal"
hi I updated my is to Ubuntu 15 and when I even writing hello World Picked up JAVA_TOOL_OPTIONS: -javaagent:/usr/share/java/jayatanaag.jar that shows me this error I searched a lot into web but I couldn't solve it I saw some solution on Stack Overflo
-
How can i apply gradient...
I have a rectangular shape movie Clip (Size :130px X40 px). I want to apply linear gradient on it using action script. Can anybody help me how can I apply gradient on it. Note: This movie clip is made manually. Not by using createEmptyMovieClip metho
-
Performance Monitor Remote Data Collection unable to get data
When attempting data collection of a remote Windows 2008 server (Server_B) from another W2k8 server (Server_A) I receive the following error: "When attempting to start the Data Collector Set the following system error occurred: No data to return."
-
Flash Player - Disable Hardware Acceleration - Apple TV-Mac OS 10.4.7/Firefox
Hello all, I have been going down a fun path getting my 1st Generation Apple TV (160 GB HD) to run Hulu natively (without PlayOn restreaming). After fun times getting Firefox and Flash Player working, I blasted through setting up Hulu Widget to keep