Connect eMac to Internet through an iMac
I have a wireless router in one room that has the only phone jack in my house. In another room, I have an iMac running Leopard and an eMac running Panther. The iMac is connected to the Internet via the wireless router. Is there a way to hook up the eMac to the Internet THROUGH the iMac? Like with an Ethernet cable and internet sharing, or something like that? I don't want to buy an Airport card or a USB internet stick if I don't have to.
My eMac is wired via ethernet direct into my Airport Base Station router, and then my MacBookPro and Powerbook connect to the Airport via wireless...
So, yes, you could plug the eMac into the router via ethernet.
But yes also, you should be able to connect both Macs via ethernet, tell the iMac to allow "Internet Sharing" (and choose Ethernet in the list), and then go online on the eMac...
Similar Messages
-
I'm not entirely displeased with the situation but I cannot see how I could be connecting to the Internet through my airport express when the Airport is not connected to anything.
Weird huh?
I have a separate non- Airport wireless network connected to the Internet. I had previously set-up the Airport to link with this network but disconnected it (by resetting it) as music streaming was unlistenable due to frequent drop out. I now just have the Airport Express as a standalone wireless network only connecting to the stereo to stream music from devices.
My devices are only connected to the Airport network with cellular data off. Yet I can still connect to the Internet AND listen to streaming music (without drop-out no less).
I don't want to fix it but I would like to know how the frag it could happen so i don't screw it up accidentally.I would say you still have something of the previous setup.
To be sure you don't mess up, save the configuration.. go to the top menu area of the airport utility and export configuration.. which will land on your computer.
Now you can recover at anytime to the current setup.
How it works.. that is magical ..
Open the airport utility.. edit.. and take a screenshot and post it of the following pages..
Internet wireless network
THen we can tell you how it is working. -
My MacBook pro will not connect to the Internet through wifi yet all other devices do
My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?
Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...
-
My ipod touch says that I am connected to the internet through the setting tab but when i try to get on the internet it says no connection. I tried new downloads and updats and connectioning to other wifi in variouse places and still no luck.
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset<Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
How do I get windows to connect to the internet on my iMac
How do I get Windows 7 Home Premium to connect to my existing internet connection, on my iMac (Lion 10.7.3)? The installation of the Windows 7 using Bootcamp went fine, up to the point of getting connected to the internet. My iMac side of the partition connects to the internet just like it always did.
You should ask this in the boot camp forum.
You will probably get more help there. -
What are the benefits of buying an iPad 2 with wi-fi, or with 3G when I already have an iPhone 4 with 3G? My plan with was to go for wi-fi and connect to the internet through my iPhone 4. Am I missing out on anything by not getting 3G?
James9901 wrote:
I tried the tethering and hated it. The connection breaks every time I get > 25 feet from it and it's a pain to reestablish the connection. I suppose if I had to choose between breaking connections every now and then or paying another $100 + $25/month I'd do the tethering.
Or just carrying the phone in your pocket? Just saying..... -
I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?
Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner. -
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Connect iphone to internet through macbook
How do I connect my iphone to the internet through my macbook which is connecting to the internet through broadband
Assuming your MacBook is connected via ethernet and you want to create a wifi signal for the iPhone (and that you don't have a wifi router which would be the more usual way with both devices just connecting to the router): http://support.apple.com/kb/PH10740
-
We are on holiday in Mexico. Our iPad2 has no problem connecting to the Internet through our hotel's subscription WiFi network. But, both of our macbookpros can not with the same password. What can we try?
We can join the network, but can not access the Internet. The password is correct. We have tried network assistant and diagnostics, restarting the laptops, re-joining the network. Our iPhone 4s also works all the time.
Same location. Signal strength is good.Since I couldn't figure out a way to edit our original post, here's another potential clue.
Our laptops, when in System Preferences>Network, say "WiFi has the self-assigned IP address of XXXXXXXXX and will not be able to connect to the Internet".
Strangely, my six year old MBP running OS 10.6.8 accessed the Internet straight away, just by opening Safari to my home page. My wife's six month old MBP running OS 10.7.2 could not. -
I recently updated my iPod touch to sync through iCloud - now can't connect to the internet through wifi, my macbook air is working as we speak. ive tried 'forgetting this network" in settings; tried turning off and on again; and pulling my hair out! The last was equally useless and a little painful!
Try:
- Resetting the iPOd. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Pwer off and then back on yur router
- Reset network settings: Settings>General>Reset>Reet Network Settings
- iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
IMacs won't connect to the internet through a Double Router Network.
Hey guys,
I have 4 computers in the house, 1 is an XP system, 2 are iMacs running latest version of Leopard, the last is my Macbook Pro running latest Snow Leopard. The reason for the two router solution is as follows: The connection where the modem and router were previously was unable to broadcast a signal to the other side of the house (concrete). So I placed a wired router on the end where the modem is, and through cat cables placed in the walls, placed a wireless router on the other side of the house.
I have already set up the wireless router to become a wireless access point by turning the operating mode to router instead of gateway, and changed the internal ip to 192.168.2.x. All in all my macbook connects to the internet just fine through the router now turned access point and picks up the IP of 192.168.1.x (from the wired router directly connected to the modem), but the iMacs are picking up 192.168.2.x ips which have no connection to the internet.
I have tried to renew the DHCP lease (which should pull the 192.168.1.x since the wireless router has DHCP turned off) but it still wants to connect to 192.168.2.x. Any ideas or solutions to fix this?hi i have read your problem but i can be wrong... because suppose to be your system have working before. i think can exist conflicts between modem ip address and router ip address. first disconnect your modem from your router put in your internet explorer 192.168.1.1 and if your router has password live user name area in blank. and put in password area admin and push return. when appear the setup menu ( must to be in basic setup menu by default) search the text Local IP Address 192.168.1.1 and let change for 192.168.2.1 and do click in save settings button turn off your modem your router and connect everything and turn on them. check if you get access internet service.
-
Can't connect to the internet through router
I have an HP Pavillian DV6 laptop, DSL connection through ATT, a Linksys wireless N router. It had been working fine for abourt 7 months, Then all of a sudden I lost my network connection. I clicked in the right hand corner to connect to the network & it was gone. I have tried to re-run the software for the router & I get to where it wants to connect to the internet & it won't. I have tried to log into the router to run the setup on the internet explorer page using 192.168.1.1 I now can find my network, I click connect, it says it is connected, but no internet. I can connect to the internet if I plug the modem directly into my laptop, but once I connect from the modem to the router, it will not connect to the internet. I have been searching HP, CIsco, & even my maker of my wirelkess card to see if there were any driver updates. My wireless card says it is up to date. I tried to rest my BIOS, that didn't help either. I'm stumped, & I've spent entirely too much time trying to figure this out with no success, PLEASE HELP!!!!!
Reset your router to defaults. Here's the procedure.
Reconfigure the router so it would connect to the internet. Here's the procedure.
Reconfigure your wireless settings. Here's the procedure. I suggest you set your SSID to something unique. In addition, set your wireless security to WPA or WPA2. Don't use WEP as it is insecure. -
PPC WM5.0 connect to the internet through a blackberry phone?
Is there a way to connect to the internet with a ppc wm5.0 through a blackberry phone 8700 series. I know how to do it using a ppc phone and the internet sharing program after you pair the two devices. Just wondering if you could do it with a blackberry as well?
i am pinging from the ASA itself, not the inside network.
interface Ethernet0/1
speed 100
duplex full
nameif outside
security-level 0
ip address 10.10.10.1 255.255.255.252
access-list 101 extended permit icmp any any
access-list 101 extended permit tcp any any
access-list 101 extended permit ip any any
access-group 101 in interface outside
access-group 101 out interface outside
route outside 0.0.0.0 0.0.0.0 10.10.10.2 1
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect ip-options
inspect icmp
service-policy global_policy global
asa5510# ping 10.10.10.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.2, timeout is 2 seconds:
Success rate is 0 percent (0/5) -
Blackberry 9320 can't connect to the internet through WIFI
Dear all
I have problem connecting my Blackberry 9320 to the internet via the wifi. I have tried all settings but still can't connect. I connect to the WIFI but when I try to connect to the net its says can't connect to the internet if the problems continues contact your internet service provider. I had the Blackberry 8520, I could connect to the net through the WIFI easily but with this I really don't know where the problem could be. I really need your helpIf it says "Contact your service provider", then i don't think it's a problem with BB's end. You need to contact your carrier.
God is Great
Maybe you are looking for
-
Adding an ipod touch to existing account (with multiple ipods)
Hello. My current itunes account syncs completely to my Ipod classic (much music and many playlists). I also have a ipod shuffle which I have set up to sync ONLY to its own designated playlist in the same account. I have just aquired an ipod touch wh
-
Error while opening the offer letter.
Candidate has applied for a vacancy and offered.But when trying to view offer from offers workbench the offer letter does not show up....we get an error page. plz suggest if m missing some profile option or anything
-
Can someone tell me some reason for using ASM when using hardware stripe & mirror besides that files are created and managed automatically?
-
Apple Tv no photos. Home sharing only lasts for one session
My Apple Tv only shares photos for a while then my computers name disappears from head list I can only access Music after subscribing to I match and using I cloud. Have tried some ideas suggested by others with similar problems; and 4 calls with Appl
-
Quality and Index Design repository Reports
Hi, I'm looking in Designer6i for reports to document the design phase. In particular, to 1)list all the indexes defined for tables, in old versions of Designer it was called Tables and their Indexes 2)list the design quality checks. In old versions