Connect firewire audio interface and external monitor

I have just bought my MacBook Pro 13 and I will mainly use it for audio recording . I have connect my audio interface through the firewire port. I need to connect an external monitor . The only available ports are thunderbolt and USB . Can I connect a monitor with these available ports ?

Hi charisio,
Thanks for visiting Apple Support Communities.
If you would like to connect an external display to your MacBook Pro, you can use the Thunderbolt port. See these articles for some good information about Thunderbolt:
Thunderbolt ports and displays: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht5219
OS X Mountain Lion: About Thunderbolt
http://support.apple.com/kb/PH11407
All the best,
Jeremy

Similar Messages

Audio interface and external hard drive config for new imac 21"

Hi. Just got the new imac 21" and I'm considering using it as my main daw with Logic Studio as an upgrade from my old sonar mobo. I usually run up to 40 tracks of recorded audio with fx plugs. I hope to do this at 24 bit 96 instead of 24bit 44 like I did on the old system. I also run the occasional softsynth and sequencer which I don't mind bouncing down to .wav to conserve cpu.
I really like the specs on the m-audio profire 2626 (I need the 8 mic inputs for recording drums) which needs firewire. But at the same time I'm reading a lot of recommendations about using an fw800 external drive for audio. I've read a little about daisy chaining and I'm wondering if anyone's gotten this type of configuration to work. I'm also open to any other configuration options you have to share that would enable my goal of successfully using this mac with logic.
thanks in advance for the help,
dave

I run three firewire audio interfaces daisy chained together, 2 Presonus FP10's and an Alesis Multimix8.
This gives me 24 simultaneous inputs. I normally record 24 bit at 88.2 . My iMac has a FW800 and a FW400 port. What I tried to do was run all the interfaces through the 400 and record to a FW800 external hard drive but I it kept dropping out interfaces, even if I used only one interface. I switched firewire cables on the hard drive to a 800/400 so that the hard drive was now operating as a 400 and I did not have any more interface drop outs.
Even though the iMac has 2 firewire ports, they connect to a single cable to the i/o inside the Mac. If I try recording to an external hard drive, that is 24 tracks going into the Mac, back out to the hard drive, back in to the Mac and then back out to the interfaces and on to the monitor speakers. That is a lot to ask of a firewire connection.
So, I record to the internal drive and use the external for backing up and saving the projects.

Firewire audio interface and drive on Macbook Pro?

Apologies if this is in a FAQ which I can't find.
I have been recording on the internal drive of my MacBook Pro up to now, with a MOTU896 (notHD) but want to buy an external drive, partly to save wear on the internal.
My last experience of this was in the days of bronze G3 swhere it was advised not to run a drive and an audio interface on the same firewire bus - in fact, I experience glitching when I tried to do this. Perhaps this is no longer an issue? I'm recording at 44.1/24 but do want to be able to record 8 simultaneous tracks.
Is it best to get an extra FW port via the slot on the side of the computer?
Thanks
Gorwel

Exactly the same question was posted yesterday, here is the link to the thread:
http://discussions.apple.com/message.jspa?messageID=9649795#9649795

IChat AV doesn't work with M-Audio Firewire audio interface

I saw similar topics to this but none dealing with a Firewire audio interface and none with exactly the same problem.
Every other piece of software I use works with the M-Audio Firewire Solo, except for iChat AV. When it is the selected output device and I start a video chat with someone, I get just horrible, loud static when the person on the other end speaks.
Running 10.4.10 on a Macbook Pro (2.16 GHz Intel Core 2 Duo).
Does anyone know of incompatibility issues with iChat and Firewire interfaces?

In Audio MIDI Setup (In applications/Utilities) the setting for my Mic is 44100khz 1Ch 16bit.
The Internal Audio connection also shows up at 44100Khz 2Ch 16bit
Are you looking in the same place or in the device itself ?
I would set it in the Audio MIDI Setup and then make sure it responds in System Preferences > Sound > Input tab.
Once the Blue bar moves to at least halfway there I would then check iChat > Preferences > Video Section to see if the green bar under the Vido pics is moving.
4:25 PM Friday; September 7, 2007

IMac20" with firewire audio-interface konnekt24D by tcelectronic

Hi folks,
I've got some cryptic problems with my iMac and the connected firewire audio-interface (konnekt24D by tcelectronic). I'm running MacOSX 10.4.10. The problem is that after four days working with no occuring problems I got no sound output. When I restarted the Mac the blue firewire light of the audio-interface disappeared and the tcnear control panel says 'no device'. I decided to update the firmware and then everything runs properly for one day. The next day I got the same 'no output' problem. I decided to update the firmware again but now the blue firewire light disappears and I got 'no device' message from the tcnear control panel. I started the Mac again but the interface was still gone. Now I switched off the Mac and turned it on again. The interface was there and I had output. Next day I got the same problems.
The tcelectronic support said that I should disconnect any other network cables, enable every network setting on the network control panel and connect the power supply of the audio interface. I did everything but got no improvements. The people from tcelectronic concluded that my audio-interface could be defective. So I went to my mönger and he gave me a new one.
From now on everything worked fine for three days. During this time I changed nothing on my setup. No new software was installed, the only thing I did was to start LogicExpress 7.2.1 and begin with my work. After three days I got the same 'no output' problem again. Now I think that there must be something wrong with the iMac. It is the 'old' version (bought in May this year) and I don't know exactly what to do now.
What I don't understand is that both devices worked a few days and then the problems occured. As I said before I didn't changed anything, installed no new software, etc. Maybe the harddisk of the iMac is defective? I've plugged the audio-interface into the other firewire port of the Mac but got no improvement.
I don't know exactly what I should do know because I worked ten years with a PowerMac/Audiomedia III/SCSI system and never had such strange problems.
Greetings to all of you,
Dorsch.

Check out this thread here:
http://discussions.apple.com/thread.jspa?threadID=1656583
It appears that sp3 has issues with firewire. I'm seeking a solution too, short of reinstalling as this person suggests. See also his link re: the famous little patch. I tried that already to no avail. I'm using SP3 too. My firewire behaves like USB... which would/could cause issues like you're describing.
Mike

FW audio interface and FW drive Q's

Hi all, we're planning on upgrading our home studio with a quad g5's and have a couple questions regarding the audio interface. We currently have a MDD with 2 internal ATA drives running in RAID as the scratch drive. We're planning on putting them in a RAID firewire 800 enclosure to continue using them as a scratch disk. We also run a PCI audio card which will have to be replaced. Since I've seen no PCI-E audio cards, I'm looking at firewire breakout boxes. Are we going to run into problems with running both a firewire audio interface and a firewire scratch disk?

Well I ran xbench and our current scratch disk scored consistently about 70 : ( The only high score (144) was the random uncached read with 256k blocks. The only thing is that xbench changed their base computers. I have a saved xbench file from a year or so ago and it scored a 116 with nearly equal speed if looking at MB/s/. If you still have your detailed xbench results, can you post how well it compares with mine?
Disk Test     67.92
          Sequential     76.94
               Uncached Write     97.63     59.94 MB/sec [4K blocks]
               Uncached Write     96.64     54.68 MB/sec [256K blocks]
               Uncached Read     47.45     13.89 MB/sec [4K blocks]
               Uncached Read     96.88     48.69 MB/sec [256K blocks]
          Random     60.79
               Uncached Write     27.89     2.95 MB/sec [4K blocks]
               Uncached Write     143.74     46.02 MB/sec [256K blocks]
               Uncached Read     97.80     0.69 MB/sec [4K blocks]
               Uncached Read     78.35     14.54 MB/sec [256K blocks]

Firewire chain for external audio interface and hard drive

I use Logic Studio 8 on a Macbook Pro with a Presonus Firebox, an external Lacie Firewire hard drive for audio recording, and another Lacie Firewire drive for backups.
Is there a recommended chain order when chaining my Firewire devices together? I read somewhere on a ProTools forum that they recommend putting their Firewire audio interface Mbox2Pro at the end of the chain.
So right now I have Macbook Pro -> Backup Drive -> Audio Drive -> Presonus Firebox. I once had it in a different order with the audio drive first, but I found it was reading more slowly from/to the audio drive when it was in that order. I have no idea technologically why this would be the case.

I just found and joined this great forum. Following up on Ray's comments about his MacBook set-up, I have a similar MacBook 2ghz, 4mb ram, 9400 chipset, and am exploring getting into Logic Pro 8 and was wondering if my MacBook was underpowered, and whether I needed to step up right away to a MacBook Pro because of my lack of PCI slots for recording audio to an external eSATA drive.
I was encouraged to hear that the USB 2.0 connection for Ray's external WD 7200 hard drive has worked and improved things and his audio isn't getting choked and he is not getting the clicks and other problems.
I'm wondering if Ray or anyone else has any other tips on using a MacBook for Logic and for optimizing one's setup. And Ray, did you notice a point at which the clicks started? .. in terms of number of tracks? Or were they present from the outset? I'm wondering how many tracks you are running now on your system.
I might mention that I don't have an audio interface yet but was impressed with what I've read about the Apogee Duet. Any comments on interfaces and the Duet?
By the way, I'm just recording one instrument/one track at a time and perhaps occasionally two instruments at a time. And right now, my main purpose for getting into Logic is for editing and mixdown of pre-existing tracks that have already been created on a standalone hard-disc based DAW. If all goes well and if I like the whole Logic experience I'd expect to get a more powerful MacBook Pro or even a Mac Pro or whatever higher end iMac exists in the future.
To summarize, all I'm intending to do initially with the MacBook is:
1) transfer individual digital tracks from a standalone hard disc-based DAW into Logic for mixdown and mastering.
2) Record a few extra new tracks one at a time - probably not using any instrument plug-ins but relying on external synth/sampler/guitar sound sources ..in each song (maybe 3-4 tracks at most), and
3) apply standard effects like reverb and EQ and panning to the mix down and master songs, each song containing a of approx 25-40 tracks.
My basic question is, can a MacBook 2Ghz with firewire 400, 4gb memory and USB2.0 to external hard drive handle this or is it underpowered? Thanks.
Derek

(MacOSX Lion 10.7.4) The problem of connecting the audio interface (USB and FireWire), grained acoustic distortion!?

When you connect the audio interface to usb or firewire grained acoustic distortion, there is no loud noise in the acoustics! In the old "iMac24 Snow Leopard" was not like this!
Just bought the iMac21 lion, installed the new drivers and the two interfaces of different firms is presented, this acoustic problem.
I understand it comes from a usb and firewire!?
Help Me_____
Sorry for my english

Well, it's been a few days and with no response I thought I'd look for another solution. I've been trying this software called iVPN, apparently it's like a front-end to OS X's built-in VPN server. Anyway, I disabled the VPN Server from the Server app, turned on iVPN and was VPN-ing from my iPhone over 3G in notime. It's a great app, though it kinda ***** that the server can't do what it's built to do. Since VPN was the big reason I got Server in the first place, I'll probably uninstall it and stick with OS X's built-in file sharing and iVPN.

Playing DVDs in 5.1 With Firewire Audio Interface Connected for Logic Pro

This is exactly the same q as asked by plantwebguy in July 06, link
http://discussions.apple.com/message.jspa?messageID=2696970#2696970...
I'm struggling to get an answer on this anywhere... I have Logic Pro running 5.1 Surround Mixes on a g5, using a Metric Halo Mobile IO Firewire audio interface - its 6 analog outs are connected to a M Audio LX4 powered surround system. It all works great - until... the problem is when I need to listen to DVDs with 5.1 soundtracks (for reference), or even HD trailers (with 5.1 soundtracks). With the Mobile IO selected as audio interface, DVDs only play in stereo. I think this is because the 5.1 soundtrack is only output thru the optical out - but connecting the optical out to the Mobile IO and selecting 'Digital out' on the g5 brings silence.. Im told this is because the MIO's optical in wont decode 5.1. I'm interested to hear from anyone with a Pro Audio interface - like a MOTU etc - who needs to switch between mixing their own music in 5.1 and then listening to DVDs in 5.1.. I cant be the first, surely?
Plantwebguy said he solved his issue with VLC. Do we know if VLC willl decode 5.1 and then output it to the Interface via Firewire? I've searched the net for a Pro Audio interface with (1) 6 analog outs & mic inputs etc (2) firewire connection and (3) optical in that reads AC3/5.1 etc (rather than just ADAT).... nada. Sorry to be long-winded but I cant get a solution anywhere..
Thanks in advance
g5 dual 2.5 Mac OS X (10.3.9) Logic Pro/Mobile IO 2882 FW Interface/M Audio LX4

This is exactly the same q as asked by plantwebguy in July 06, link
http://discussions.apple.com/message.jspa?messageID=2696970#2696970...
I'm struggling to get an answer on this anywhere... I have Logic Pro running 5.1 Surround Mixes on a g5, using a Metric Halo Mobile IO Firewire audio interface - its 6 analog outs are connected to a M Audio LX4 powered surround system. It all works great - until... the problem is when I need to listen to DVDs with 5.1 soundtracks (for reference), or even HD trailers (with 5.1 soundtracks). With the Mobile IO selected as audio interface, DVDs only play in stereo. I think this is because the 5.1 soundtrack is only output thru the optical out - but connecting the optical out to the Mobile IO and selecting 'Digital out' on the g5 brings silence.. Im told this is because the MIO's optical in wont decode 5.1. I'm interested to hear from anyone with a Pro Audio interface - like a MOTU etc - who needs to switch between mixing their own music in 5.1 and then listening to DVDs in 5.1.. I cant be the first, surely?
Plantwebguy said he solved his issue with VLC. Do we know if VLC willl decode 5.1 and then output it to the Interface via Firewire? I've searched the net for a Pro Audio interface with (1) 6 analog outs & mic inputs etc (2) firewire connection and (3) optical in that reads AC3/5.1 etc (rather than just ADAT).... nada. Sorry to be long-winded but I cant get a solution anywhere..
Thanks in advance
g5 dual 2.5 Mac OS X (10.3.9) Logic Pro/Mobile IO 2882 FW Interface/M Audio LX4

Bus power (firewire): both Audio interface - and - hard drive ? Risk

Is there a known risk to damage to the firewire controller (MacBook Pro April 2008 rev) if I connect both a Motu Traveler bus-powered audio interface and a G-Tech 5400 rpm bus-powered drive.
I seemed to recall seeing if one does this, there is a risk of "burning out" the firewire port on the MacBook Pro. Is this a real risk ? Is anyone doing this ? More generaly, what are the risks of chaining multiple bus-powered devices together ?
Thanks up front ...

Is there a known risk to damage to the firewire controller (MacBook Pro April 2008 rev) if I connect both a Motu Traveler bus-powered audio interface and a G-Tech 5400 rpm bus-powered drive.
I seemed to recall seeing if one does this, there is a risk of "burning out" the firewire port on the MacBook Pro. Is this a real risk ? Is anyone doing this ? More generaly, what are the risks of chaining multiple bus-powered devices together ?
Thanks up front ...

After using my new firewire audio interface, my devices get electrostatic

I recently bought a Focusrite Saffire 24DSP which is connected by a firewire cable to my macbook pro (late 2010). I connect it as stated with my macbook of. Now there are moments (and unfortunately they are moment of surprise) that my macbook's case get all electrostatic. Not just a little bit but one that makes your hair rises. Also at that same moment the case of the Focusrite audio interface is also all static, also the back of my audio monitors/speakers (which is connected by xlr-cable to this audio interface), these last two devices are the worse, and even in some cases the metal case of my Novation Remote SL keyboard which is connected by usb to my macbook. You can understand that I sometimes getting nervous to touch anything once the audio interface is powered on... or at the end of my session to power my stuff off.
I first thought that connecting the audio interface to its own wall socket/adapter, instead of using it by powered from the firewire, would solve it, but not.
Even this morning, after powering off everything last night (though the firewire cable still connected), i got a shock when opening my macbook and 5min. later touching the audio interface. How can I resolve this? Is it a problem of my new interface, is it a firewire problem? or is it the macbook? ......
Would it help to put the audio interface on rubber feets.. or should I take care in what order I put devices on and off? Please any help or suggestions, since waking up this way is a terrible one

Is the MBP plugged in using a three pronged properly grounded outlet?

Connecting the T410s to an external monitor

1) Excuse the ignorant question but how would you connect the T410s to an external monitor? The T410s has a DisplayPort port, but what if the monitor does not have a DisplayPort port but an HDMI port?
2) Which leads into my second question. How would I connect the T410s to two external monitors? I guess whatever the answer is to the above question, but connect some kind of a splitter coming out of the T410s DisplayPort port?
3) And lastly, take a look at this link...
http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:category.details?current-catalog-id=12F0696583E04D86B9B79B0FEC01C087&current-category-id=19C791A03AF24034A0011B825513BCED&tabname=Gallery
Once you get there, click on T400s below the thumbnails. If that long link I pasted does not work right, it is the T-series gallery on Lenovo's site. In one of the pictures, it shows the T400s connected to two external monitors, but does not say how. They brag at how you can export 2560x1600 to two monitors without the use of a dock. Is this possible even though the T410s video card tops out at 1440x900?
Thank you.
~Paul
Lenovo ThinkPad T410s - 2901CTO
IBM ThinkPad T41p - 2373GGU
Solved!
Go to Solution.

Thank you, lead_org. You've been very helpful. Last 2 questions hopefully.
1) Regarding the use of DisplayPort on the Mini Dock Plus, since DisplayPort transmits audio as well as video (unlike the old style VGA which only sent video), if I connected the Mini Dock Plus to the HDMI port of my monitor (using a DP-to-HDMI adapter of course) would I lose audio out coming out of the green miniplug port on the mini dock, since the system might assume I want all audio to go through the DisplayPort cable? I have seperate external speakers I want to use and not the ones on the monitor.
2) Do you lose any quality when you connect to an external monitor using a Mini Dock, as opposed to connecting directly from the T410s itself? The reason I'm asking is that some people claimed that using the green miniplug audio port on the dock generates a much lower volume than if they were to plug the speakers directly into the laptop instead.
~Paul
Lenovo ThinkPad T410s - 2901CTO
IBM ThinkPad T41p - 2373GGU

Audio Interfaces? External Hardrive?

I'm about to purchase a Macbook Pro the day after tommorow and I've been wondering if I'll be able to use a firewire Audio Interface to record with.. I'm thinking about getting the MOTU Ultralite..
And do you think it would be best to record audio tracks to an external harddrive? If so, what brands/models do you guys recommend?

looping what you play is as simple as: play a measure in time. grab the top right edge of the recorded region and drag to the right. it loops.
the only work you might have to do is trimming the beginning and ending of the region so that it starts and ends on a measure. this can be done by either cutting off the excess areas ("splitting" the region), or dragging to shrink it.
when you get it, read the help files, there is a wealth of information contained therein.

Multi channel firewire audio interface

Hello, Is anyone using a multi channel firewire audio interface with a mac mini? eg alesis miltimix?

No issues. You'll probably want to invest in an external 7,200 RPM Firewire drive though since the Mini only has a 5,400 RPM SATA internal drive.
I used it with both TIger and Leopard as well as Logic Express 7.2 and Logic Express 8.
OS X supports it right out of the box so I didn't even need to install additional drivers.

Lowest latency Firewire audio interface for Logic... which should I choose?

Hi Guys,
I'm about to replace my trusty Yamaha n12 with a dedicated firewire audio interface.
My main requirement is super-low latency for running BFD and other virtual instruments, along with monitoring through Logic directly sometimes (to add effects to vocals in real-time, etc).
I've narrowed down my choice (I think!!) to:
- RME Fireface 800
- Apogee Ensemble
- MOTU 896 Mk3
I have been told that the RME drivers are incredible, and hence it has the lowest latency.
I'd love to hear from other Logic users who own any of the above! What kind of latency do you get (round trip in ms)? What is the lowest buffer setting you can use?
Any downfalls or problems you've had with any of these interfaces?
Thanks heaps guys, can't wait to hear some opinions!
Cheers and thanks,
Mike

Thomjinx wrote:
If yeloop is using BFD, then direct monitoring isn't going to help him. That is for audio in.
Exactly.
FWIW, on MOTU Ultralites, I get a little (less than 1 ms) less latency with the Mk 1 rather than the Mk 3.
Perhaps the built-in DSP slows the Mk 3 down?
Interesting--thanks for the info (one more reason not to upgrade MOTU, frankly...)!
It is still 4.3 ms at 32 samples with the Mk 3. For MIDI controlled VIs, it would be less than that.
I think I measured 3.9ms with my Traveler mk2 at 44.1k with a 32 sample buffer. So, it's a bit faster than the mk3. At 96k I can use a 32 sample buffer to get 2.5ms latency, but I can't run BFD2 with a 32 sample buffer. Best I can do with BFD2 is a 64 sample buffer at 96k... 3.16ms.
But, you're exactly right, Thomjinx: with a VI, you won't hear that full amount of latency. Assuming the MIDI latency is negligible, the VI response time will be roughly 1/2 the full analog audio latency. (Logic reports both of the these figures--output latency and full roundtrip latency--if you click on the latency info in the Audio preferences. Be aware, though, that some devices report this information correctly, while others do not. For instance, with the Apogee and Metric Halo products I've used, the numbers reported by Logic are exactly correct, while with MOTU, the numbers shown in Logic are lower than reality: with a 64 buffer at 44.1k the Traveler mk2 indicates 4.3ms roundtrip latency with Logic, but I measured it as 5.6ms... so you may be misled if you try to use the latency values reported by Logic to compare products... in that regard, MOTU seems to cheat, while Apogee and Metric Halo follow the rules
-James

Connect firewire audio interface and external monitor

Similar Messages

Maybe you are looking for