Connect "Generic Data Source" target to a MySQL instance

I'm trying to connect our TEO (2.2) instance to a MySQL instance, but unable to do so successfully.
On the TEO server, I've loaded the MySQL provider as well as the ODBC driver.
I then try to define the connection details in the new target:
Hostname: <hostname of the server hosting MySQL>
Default user: <runtime user for the read-only account to the database>
Connection String: Provider=MySQLProv;Data Source=<database name>
Clicking "OK" throws the following error: "The 'MySQLProv' provider is not registered on the local machine."
Based on the error, it feels to me like the TEO server doesn't recognize that provider, but I'd like some help on getting it to the point where it does.
Could you please provide me with the steps needed to get our TEO instance to connect to the DB?
Thanks,
Mark
Solution:
1) Install the provider from Cherry City Software : http://cherrycitysoftware.com/CCS/Providers/ProvMySQL.aspx
2) Configure the connection string as follows: Provider=OleMySql.MySqlSource.1;Data Source=<FQDN of DB host>;Initial Catalog=<DB name>
Thank you very much C Roberts!

The connection string shows "MySQLProv", is that what you actually used?
Looking at the sample C# code(and VB.net) I see this as the provider:
OleMySql.MySqlSource.1
Did you try that?
Also it looks like
Data Source=
Initial Catalog=
If you cannot get by this, would probably be best to open a TAC case for review.

Similar Messages

Issue with Safety Upper limit for CALDAY Field for Generic Data Source

Hi,
I have given Upper limit as 1 for Calday field of one of the Generic Data Sources.
I have got a doubt here.If today's load got failed and I will rerun the load next day.So Will that new run captures all 2 days records.
Can any one advise me on this.
Regards,
K.Krishna.

Hi,
A one-day upper safety interval determines that an extraction run today, only fetches records up to yesterday (if the pointer has the day before yesterday date, the extraction comprises from the day before yesterday to yesterday). This is meant to avoid missing records that were about to be persisted in the database when the delta extraction is running but whose date was determined in memory before the delta started.
If pointer has today date value and you want to load data from today and yesterday, you should use a lower safety interval. Take into account that this could reload data previously extracted. Therefore, only InfoProviders with overwritting features (DataStores or InfoObject master data) should be used as targets of this extractions.
You can find further details at:
http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
I hope this helps you.
Regards,
Maximiliano

I added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..b

i added 0AMOUNT in generic data source and in rsa3 i am seeing the data ..but i am not seeing any data in target table..
what would be the cause

Hi,
I guess you mean the target table in BW, correct?
First replicate your DSource in BW
Open your TRules. In tab Transfer structure/Datasource locate your field in the right pane (should be greyed, not blue); move it from to the left (to the transfer structure); reactivate and reload.
You should now see the field in your PSA table.
hope this helps...
Olivier.

Generic Data Source and InfoPackage Data Selection

Hello, I'm trying to extract data from a generic data source (composed of a view joining 4 tables) using the Data Selection Criteria in an infopackage. Sometimes the selection criteria is ignored and more data is pulled than expected. The number of selectable items in the generic data source has been reduced (in case this was an issue) and for a short time the infopackaged pulled the expected number of records. Then another change was made to the generic data source and the problem returned. In any case, the transported generic data source does not work in the target system either. I'm not sure what is causing this to happen. Any ideas??? BW 3.5.
Regards,
Sue
Message was edited by: Sue and Enrique
Ramesh P

Hi,
Some of the datasources will not have default Infopackages for them.You can create the infopackages according to the requirement.There is no big deal for creating Infopackages.You can go ahead creating them.
Regards
Karthik

Delta Enabled Generic Data Source

Hi All,
I have created one Delta Enabled Generic Data Source with
Function Module. The Delta field is Date Field. The Data source picks data from R3 to BW.
In RSA3, I executed the Extractor with the Delta Type "C" i.e Delta Initialization ... but it is throwing the error "Errors occured during the extraction". I also checked the Display Log and the error message is "Could not determine BW release of logical system".
Moreover I am not able to see the Delta Attributes in
RSA7. I checked with the other delta enabled generic extractors which uses Views .. is found to be working fine ... and I also able to see the Delta Attributes in RSA7.
Any suggestions?
Bye
Dinesh

Dinesh,
Once you have generated transfer rules in BW for the datasource, delta init can be tried out in RSA3. It iwll not create the delta queue though. Only test the initialization.
To do this, once you have created the transfer rules in BW, specify the logical system name of the BW system in the target system field. After that the extractor can be run in RSA3. It is flagged as read only so delta queue will not get created.
Cheers
Aneesh

Doubt in Generic data sources for hierarchy & text

Hi All,
I have a couple of doubts as mentioned below.
1 . Why we canu2019t generate generic data source for hierarchy?
2. While creating Generic datasource for text there is one more option is available i.e. "Extraction from domain"
what is domian please explain .
Thanks & Regards,
Saurabh Bansal

Hi,
1.We can't maintain Hierarchies in ECC, Because the Database design of the OLTP system is based on ERM(Entity Relationship Model),i.e Tables are connected via Primary and Foriegn key relationships, Whenever we need 1: Many connection divide the data in different tables,connect them using the primary and foriegn key relationships.
2. Domain will provide the technical properties of the Field of the R/3 table.
for Eg: length,data type of the field.

Problem during extraction using generic data sources

Hi
While performing extraction(master data) using generic data sources I am getting a problem.
while selecting application component, I am unable to find SD to select it.What should I do?
I selected CRM as application component and did the extraction , it is successful.
But what about if we want to select SD? I am guessing it as an installation problem ... Anyone plz help me
Thank you
Deepthi

Hi Deepthi,
Looks like the RFC connection between source system and BW system is broken..
Contact your basis team to check the connection what went wrong.
once the connection is re-established you can gohead ...
Try out this procedure
Type Transaction SM59.
a.) Open the RFC Destinations.
b.) Find your Source System and double click on it.
c.) Technical setting should contain information regarding your source
system
d.) Logon Information should contain source system client and name &
password for you remote logon.
**Suggestion : our remote name for our R/3 was ALEREMOTE. We use
BWREMOTE so that we can monitor without confusion.
e.) Execute your 'Test Connection' & 'Remote Logon'. You connection
should be You should NOT be prompted for a password.
f.) Repeat above to verify RFCs for other systems
regards
KP
Edited by: KP on Dec 14, 2009 12:11 PM

Generic Data Source - Delta

Hi,
I am trying to extra delta record from generic data source, but I am not getting any record in RSA7.
I have done the following setting for generic delta source
- customized table from VBRK
- Deltas Specific field (ERDAT) - Date on which record was created
- Time Stamp (As i need to run this delta process every one hour)
- Safety interval upper limit = 900 Sec.
- Safety interval lower limit = 0 Sec.
- Additive Delta for target info cube.
Can you please help me to debug this issue.
Thanks

Hi Rajiv
Can you give more details on the load( Loading cube or ODS)?
When was the INIT done?
Regards,
Monika

Generic Data Source with Function Module data mismatch

Hi All,
I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
and single record is divided into 2 records in BI side(not all the records), how can it be possible???
is there anything Im missing to explain you my issue???
if understood please help me out.
Thanks n Regards,
ravi.

HI rkiranbi,
1. FIrst you excute function module according to your paramers, you will get some records. then goto tcode RSA3 --> excute
Provide your Data source name and under setting we have options like Data records/calls, Display extractor calls and selections --> fields .
in that options you have to increase the values. and then you have to pass paramers in RSA3 according to your function module
selections in SE37. Now you will get equal values in both functin module selection and RSA3 Selection. if it fail means you need to
check coding logic in function module.
2. if your are getting wrong values in BI System then check with
              1. compare with PSA data and data target data (here you need to check with characterstic as well as keyfigures)
              if you find any mistake you need change the coding in function module according to client requirement.
              2. compare data with RSA3 and bi report data or data target data.
                             check it properly above steps, you will get solution.
thanks and regards,
malli

Generic data source on Ztable

Hi
I wanted to create a Generic Data source based on a Ztable which is having Quantity fields, and not having Unit fields.
Thanks
Teja

You may be able to do this. But while updating into the cube /ODS, you may have a problem with UOM. How do you propose to update the key figure with unit in the data target? If you dont want this to laod into a data target, but to an info object, then can you create a info object of type NUMC and load it.
Ravi Thothadri

Generic data source

hi experts
   i have created generic data source for master data and replicated in to BW system , and created the infopakge for loading in to the data target , but wen iam loading it is coming to psa . but wen iam loading to Data target its giving error message , i tried so many times the same error is coming please help me , Error messge is "Infoobject SMID dont have Alpha Conforming value 1", (this SMID OBJECT IS from source system object )

Hi,
That Char is having ptoblem, so implement the following Routines for your Problem Char.
See the following program, and the same logic you can apply in Transfer Rules/Transformations. Take ABAPer help. Change the Code as per your requiremets, first copy and past this code in SE38 and see the result.
REPORT ZALPHA_INPUT.
DATA: ZI(18) TYPE C,
      ZO(12) TYPE C.
DATA: ZS(12) TYPE C,
      ZR(18) TYPE C.
      ZI = '000000099999889925'.
      ZS = '099999889925'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT         = ZI
   IMPORTING
     OUTPUT        = ZO.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
    EXPORTING
      INPUT         = ZS
   IMPORTING
     OUTPUT        = ZR .
Write:/   ZI.
Write:/   ZO.
Write:/   ZS.
Write:/   ZR.
Thanks
Reddy

Regarding: Loading data from R/3 To BI for a Generic Data source

Hi Every,
Need Help Urgent
I had created a Generic data source with function Module as the data source, in Rsa3 it is working fine.
1-> I had replicated the data source to Bi then i had created a info package and then I executed the same. when it is getting the data and it is show in the request monitor (Number of records ) but the status is not changing from Yellow to Green.
Status in Step by step analysis is every step is green Except "Data selection successfully finished ?" (RED)
2-> Then I had seen the Back ground job in Source system which is executing still. I waited for it for a long time but nearly 30 min.
(I had done Steps one and 2 number of time by activating replicating the data source and so on, but still their is no change in it)
3-> Then I had canceled that back ground job with the help of BASIS (as i feel that it is something going wrong).
4-> I feel that their is some thing wrong in the Code of Extractor.
Please Help...............
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZBI_MATGRIR OPTIONAL
*Need to get the data only for two Gl account which are fro material purchase while MIGO
*G/L Account Numbers: 0010502001 0010502002
data: E_T_DATA1 type table of ZBI_MATGRIR.
RANGES: R_BUKRS FOR BSIS-BUKRS,
          R_BUDAT FOR BSIS-BUDAT,
          R_GJAHR FOR BSIS-GJAHR,
          R_HKONT FOR BSIS-HKONT.
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
           S_COUNTER_DATAPAKID LIKE SY-TABIX,
           S_CURSOR TYPE CURSOR.
*Declare
TYPES: BEGIN OF TY_FAGL,
    RBURS TYPE FAGLFLEXA-RBUKRS,
    RYEAR TYPE FAGLFLEXA-RYEAR,
    DOCNR TYPE FAGLFLEXA-DOCNR,
    BUZEI TYPE FAGLFLEXA-BUZEI,
    DOCLN TYPE FAGLFLEXA-DOCLN,
    PRCTR TYPE FAGLFLEXA-PRCTR,
    SEGMENT TYPE FAGLFLEXA-SEGMENT,
END OF TY_FAGL.
DATA: GT_FAGL TYPE TABLE OF TY_FAGL,
        GS_FAGL TYPE TY_FAGL.
IF I_INITFLAG = SBIWA_C_FLAG_ON.
    CASE I_DSOURCE.
      WHEN 'ZFI_GL_M4'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
     this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
        APPEND R_BUKRS.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
        MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
        APPEND R_GJAHR.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
        APPEND R_BUDAT.
      ENDLOOP.
*GRIR Inventory (RM/Stores/Spares/FG)   10502001
*GRIR Services & Others Payable   10502002
      R_HKONT-SIGN = 'I'. "i_t_select-sign.
      R_HKONT-OPTION = 'BT'." i_t_select-option.
      R_HKONT-LOW = '0010502001'.
      R_HKONT-HIGH = '0010502002'. "i_t_select-high.
      APPEND R_HKONT.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      OPEN CURSOR WITH HOLD S_CURSOR FOR
       SELECT BUKRS
              AUGBL
              ZUONR
              BELNR
              GJAHR
              BUZEI
              BUDAT
              HKONT
              BLART
              MONAT
              BSCHL
              SHKZG
              DMBTR
              WAERS
              FROM BSIS
             INTO TABLE E_T_DATA
              WHERE BUKRS IN R_BUKRS
                AND GJAHR IN R_GJAHR
                AND BUDAT IN R_BUDAT
                AND HKONT IN R_HKONT.
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA1
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
DELETE E_T_DATA WHERE BLART NE 'WE'.
      SELECT BUKRS
             AUGBL
             ZUONR
             BELNR
             GJAHR
             BUZEI
             BUDAT
             HKONT
             BLART
             MONAT
             BSCHL
             SHKZG
             DMBTR
             WAERS
             FROM BSAS
             into table   E_T_DATA
             WHERE BUKRS IN R_BUKRS
               AND GJAHR IN R_GJAHR
               AND BUDAT IN R_BUDAT
               AND HKONT IN R_HKONT.
           FETCH NEXT CURSOR S_CURSOR
              APPENDING CORRESPONDING FIELDS
              OF TABLE E_T_DATA
              PACKAGE SIZE S_S_IF-MAXSIZE.
append LINES OF e_t_data1 TO E_T_DATA.
DELETE E_T_DATA WHERE BLART NE 'WE'.
ENDIF.                             "First data package ?
    DATA: F_YEAR TYPE BKPF-GJAHR.
    DATA: F_PERI TYPE BAPI0002_4-FISCAL_PERIOD.
IF E_T_DATA[] IS NOT INITIAL.
   SELECT RBUKRS
          RYEAR
          DOCNR
          BUZEI
          DOCLN
          PRCTR
          SEGMENT
          FROM FAGLFLEXA
          INTO TABLE GT_FAGL
          FOR ALL ENTRIES IN E_T_DATA
       WHERE RYEAR = E_T_DATA-GJAHR
           AND DOCNR = E_T_DATA-BELNR
           AND RLDNR = '0L'
           AND RBUKRS = E_T_DATA-BUKRS
           AND BUZEI = E_T_DATA-BUZEI.
         WHERE RYEAR = E_T_DATA-GJAHR
           AND DOCNR = E_T_DATA-BELNR
           AND RBUKRS = E_T_DATA-BUKRS.
     AND DOCLN = E_T_DATA-BUZEI.
ENDIF.
LOOP AT E_T_DATA.
      IF E_T_DATA-SHKZG = 'H'.
        E_T_DATA-DMBTR = E_T_DATA-DMBTR * -1.
      ENDIF.
      CLEAR: F_YEAR.
      CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
        EXPORTING
          COMPANYCODEID       = E_T_DATA-BUKRS
          POSTING_DATE        = E_T_DATA-BUDAT
       IMPORTING
         FISCAL_YEAR         = F_YEAR
         FISCAL_PERIOD       = F_PERI.
      DATA: V_DOC(6) TYPE C .
      CLEAR: V_DOC.
      V_DOC = E_T_DATA-BUZEI.
      IF V_DOC IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = V_DOC
          IMPORTING
            OUTPUT = V_DOC.
      ENDIF.
     aS PROFIT center is not updated in all the lines in Bsis
      READ TABLE GT_FAGL INTO GS_FAGL WITH KEY RYEAR = E_T_DATA-GJAHR
                                                DOCNR = E_T_DATA-BELNR
                                                RBURS = E_T_DATA-BUKRS
                                                BUZEI = E_T_DATA-BUZEI.
      IF SY-SUBRC = 0.
        E_T_DATA-PRCTR = GS_FAGL-PRCTR.
        E_T_DATA-SEGMENT = GS_FAGL-SEGMENT.
      ENDIF.
*As we are using the amount DMBTR in which the amount
*will be in company code currency that is Local currency
*group currency always in the main company code currency.
      CONCATENATE   F_YEAR '0' F_PERI INTO E_T_DATA-FISCPER.
      MODIFY E_T_DATA. " from gs_bsis transporting dmbtr fiscper.
      CLEAR: E_T_DATA.
    ENDLOOP.
      S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
   ENDIF.

Hi,
Please check the log of same jobs for last week and check is today its taking more time,also check with basis is their any backup initited at same time.
Moreover until the background job failed automatically its difficult to imagine what is the exact issue.
Thanks,

Error While Creating The Generic Data Source.

Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santosh

n Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM

Error while creating Generic data source using FM

Hi Experts,
I try to create a generic data source using the Function Module via the transaction RSO2. I got the following error messages.
" Das Einheitenfeld CURR des Feldes ZPKZA1 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA2 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA10 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide".
for all 10 fields of type CURR.
How shall i handle this issue..........any suggestions please........
thanks in advance
cheers
sailekha

Hi,
Are your CURR fields refereded to a currency field of your structure?? Maybe the problem is that the field containing the currency is refered to other table/structure and it has to be one of your structure fields.
Hope this helps,
Regards,
Carlos.

PowerView error -Cannot create a connection to data source 'TemporaryDataSource'.

Hello and thanks for the time.
I am getting the following error when trying to create a powerview report. I don't get where is this TemporaryDataSource is and how do I check the permissions on it? that is what this error is pointing to, no? I tried re-installing the
SQL reporting add-in and no go there. SQL Browser services are running. I can see the file in Excel just can't create a powerview report. any and all help is appreciated. thanks.
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'https://teamsite.domain.com/POWERPIVOT/PowerPivot%20Gallery/Test.xlsx'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'https://teamsite.domain.com/POWERPIVOT/PowerPivot%20Gallery/Test.xlsx'. Verify that the connection information is
correct and that you have permissions to access the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'TemporaryDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error
navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>

Hi,
Issue not supported in sharepoint on-premise team.
In addition, as this issue is related to Powerview, I suggest you create a new thread on for Powerview forum, more experts will assist you.
https://social.technet.microsoft.com/Forums/en-US/home?forum=powerview
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Connect "Generic Data Source" target to a MySQL instance

Similar Messages

Maybe you are looking for