Connect HP LTO5 through SAS port to HP Storage

Hi,
We just bought a HP LTO5 tape drive with SAS interface. Is it possible to connect Backup Drive with SAS port directly to SAS ports in HP Storage. Storage is MSA 2000. I'm new to storages, and didn't see any option there to configure it.
Thank you

Hi, For connecting HP LTO-5 SAS Drives you need SAS HBA Card in your server. You have to install that SAS HBA Hardware.

Similar Messages

Connecting iPod mini through Firewire port

I usually connect my iPod through my USB 2.0 ports, but I would like to try connecting it through my firewire port. When I plug in my iPod with the included firewire cable, my computer doesnt recognized the mini is plugged in (the mini is charging so I know its connected). But it works when I use my USB cable.
Any help would be greatly appreciated. Thanks

Reset the iPod when it is connected to the computer. Several attempts may be necessary.

Trying to connect 2nd printer through Ethernet Port of AEX b/g

Hello all, Hello (maybe) Duane,
I do have a 2nd Airport Express b/g on our home network, and have a normal laser printer running as a wireless bonjour printer through that 2nd AEX, which is set up as a remote base station. I do have the Ethernet port free on that AEX, and want to connect a Brother 4040cn network ready color laser printer through the Ethernet port of this base station and use it as a bonjour printer? wirelessly... The AEX is set up as a remote base station to the main base station using WDS... I read a lot that the ethernet port only works when this station is in WDS mode - it is, but I still can't get it to work...
I talked to a guy at the Apple Store and he told me it should work, and that I somehow have to configure the Ethernet port of the AEX as a bridge so that could work.... ? It is not a supported solution (as expected...) so I tried to find that, but I am not able to work it out.
I can see the printer using the brother software, it shows me the status of the printer correctly, but I cannot get any printouts. The printing windows shows the printer, even lets me pick it as a bonjour printer, sends it off to the printer, but nothing arrives at the printer... I can use the web based printer management utility, which directly connects to the using the IP address, and can send stuff that is printed out, but i cannot get it working.
Hope that makes sense - anyone out there able to help?
Ningaloo

Hello,
If you wanted to setup a wireless network, you could look at some Wireless Ethernet USB adapters (will work just like the AirPort):
http://www.afterthemac.com/
Understand that the "AirPort" is just Apple's fancy name for Standard WiFi Networking. It's not anything special. Just Apple's implementation.
So, any WiFi Ethernet Adapter is going to be compatible with Apple's Airport network.
If you want to use the standard USB to Ethernet adapters, then you could look to see if you can find a suitable driver that will either enable your adapter (the one you just purchased) to work, or perhaps find an adapter that has a 3rd-party driver and then purchase that one. The following website lists Mac OS drivers that will enable "Windows-Only" adapters to work:
http://www.sustworks.com/site/newsusbethernet.html
The problem there, is that most USB to Ethernet (not wireless) adapters come only with Windows drivers. So, this website provides information and support to make those devices with with Mac OS X.
Otherwise, I have not found a pre-packaged USB to Wired Ethernet device that comes with Mac drivers.
But, the first website lists lots of USB to Wireless Ethernet adapters that come with Mac Drivers.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

LCD becomes fuzzy after connects with T61p through VGA port

Hello,
I have a Dell E207WFP LCD which is previously connected to a Dell desktop through VGA. Today I connect it to my T61p through VGA using the same cable. I am able to setup the resolution as native resolution which is 1680*1050 @ 60Hz. However, I found that the screen is obviously fuzzy than connect to the desktop. The font is not sharp. I tried to adjust the cleartype font in Win7 and the bright and contrast in the LCD but nothing helps. I connect it back to the desktop and it works fine... Both computers run Win7. Could you please let me know what could be the possible reason? Thank you very much!
My T61p uses FX 570m video card.

This is hard to judge without a picture. It could just be a low-quality VGA port which is not a defect but an attribute or a nature of many laptop VGA ports.
Remember that the VGA is an analog-type video connector and some sort of blurriness is to be expected, especially at higher resolutions, this is because the GPU processes the image digitally as well as the LCD, but the VGA is analog so the image has to go through 2 conversions.
In conclusion: VGA is great for use in projectors and other devices with resolution no higher than 1280x1024. Above this resolution, defects are likely to appear.
For higher resolutions I'd suggest purchasing the Advanced Mini Dock which features the digital DVI port.
ThinkPad T61p | 15,4 WSXGA+ | Intel Core2Duo T9300 2.5GHz | 4GB CL4 DDR2 RAM | nVidia Quadro FX 570M | Win7 Ultimate x64

Iphone 3 and 4 can't connect with wireless through air port

We purchased a new Time Capsule yesterday to replace one that stopped working. We have been able to get the Air Port/network working for our Mac Books and iPads, but cannot access the wireless network on our iPhones (a 3 and a 4). The wireless connection function on the phones show the network and shows a check mark next to the network, but does not switch to the wireless network from 3G. We tried to 'forget the network' and sign in again, making sure we are on the WPA2. Any other suggestions? Tami

I had this happen to me yesterday. I have a AirPort Extreme and my iPhone was unable to connect to the wireless network.
I tried everything from resetting the network settings on my iPhone, Hardbooting the iPhone, and even changing the wireless password on my Wireless network and restarting the AirPort Extreme. Nothing worked.
However here is my solution:
Hardware restart. I just unplugged the AE waited about 20 seconds and plugged it back in. When it came back up ...My iPhone was able to connect to the network.

I connected the rocketfish mini display port but am only able to have audio through my computer. I was able to successfully drag the video to the tv. What can I do to hear through the tv?

I connected the rocketfish mini display port but am only able to have audio through my computer. I was able to successfully drag the video to the tv. What can I do to hear through the tv?

I HAVE T.V VOLUME!!! Thank you sooooo much eww. I was on my way thinking I would have to buy yet another type of cable. : ) Again thanks!!!

Is there way to share Air-Port Wi-Fi connection through ethernet port?

I was wondering if anyone could help me out with this, I have wireless network in the building, and is there way to configure Mac Mini to share Air-Port Wi-Fi connection through ethernet port (feed Vonage adapter)?

Have you actually shared wi-fi to ethernet on a Mac? I ask because it is not usually that simple, it is a more complicated configuration. Most folks who do it the way you described get a self assigned IP and nothing connects.
See my comment here;
http://discussions.apple.com/thread.jspa?messageID=12585788&#12585788
I have a Vonage phone adapter and Vonage does not provide the info that you need to hand configure these boxes, I have tried in the past with the one I have with a US phone number from here in Mexico.
Dah•veed

Error in people search when connecting through ldaps port

Hello,
I am getting following error when doing windows people search through ldaps port(636).
The specified directory service could not be reached.
The service may be temporarily unavailable or the server name may be incorrect.
It is working fine when i am connecting thro ldap port.
Could any one help me in this regard
-mala

Just setting the port in the console does not enable SSL. Do you have a certificate installed on that instance? If so, does your ldap client have that certificate (or its CA certificate) as a trusted cert? If not, you may need to run certutil to create/update the client certificate database.

TS2634 When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.

Airport Extreme and connecting through ethernet port to Windows XP Pro SP3

I have today had the sad experience to loose network connection to My Windows XP Pro SP3 using the ethernet port on Airport Extreme Base station, the newest one.
It seems it won't pass an IP address for XP using DHCP, and to make things worse My wireless access using My is working okay!!!
Why do I only have this problem through ethernet ports on the Airport Extreme Base Station for XP, but wireless connectivity for My Mac's works????
If others have similar problems and have found a solution please let Me know.
Yes, I have twice today contacted My ISP provider but as the Mac's can connect the problem seems to lie with the Airport Extreme Base Station.
I will check this forum tomorrow and hopefully a response has been given to solve My problem
Kind regards
Engineer
Preben Duus
Denmark, Europe

You can access the AirPort Disk via normal file-sharing connection options, such as selecting the server from any Finder window’s sidebar in the Shared section. AirPort Disk uses two standard methods: AFP (for Macs) and Samba (for Windows or Linux).
Leopard accesses AirPort Disks through the Finder, just like any other network volume. Open any Finder window, and look in the sidebar for a list of servers in the Shared section. You should find your AEBSn.
To mount an AirPort Disk volume, follow these steps:
1. Select the AEBSn in the Sharing section of the sidebar.
2. To connect as a Guest user, you need take no more steps; To use a named account, click the Connect As button in the upper right and enter your credentials.
3. Double click a volume that’s shown to mount it on your system.
For both Windows XP and Vista, open the network browser by double-clicking Network on the Desktop. The base station name should appear in the Network browser.

Capture Weigh Bridge Reading in ABAP Program through RS232 port

Dear SAPers,
I am in Cement Implementation Project and i have requirement to Connect Weigh Bridge to SAP ERP and capture the readings of that Weigh Bridge in ABAP program.
How can i capture those readings in ABAP program or save them in a Z table using RS232 port????
Best Regards,
Kholoud
Moderator message: please do not cross-post.
Edited by: Thomas Zloch on Mar 17, 2011 1:22 PM

Dear Vijay,
I'm having the same problem in my implementation, the client needs me to capture the readings from Weigh Bridge through RS232 port directly to ABAP program.
Could please tell me how did you solve this??
Thanks
Kholoud

Unable to Connect to SAP through SAPGUI

Dear all,
We have a PI 7.11 dual stac ksystem on Linux, oracle.
we are able to connect to the server through putty, but not able to launch xmanager as it is sayign XDMCP error....
Also unable to connect to SAP through SAP GUI
we are getting wsaewouldblock resource temporarily unavailable
I am connecting to servers through CISCO VPN......
Thanks,
Murali L.

[root@PIPROD work]# ps -ef | grep dw
pipadm    2042 23763 0 19:34 ?        00:00:01 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
root      8373 6880 0 19:52 pts/1    00:00:00 grep dw
gdm      17480 17397 0 15:48 ?        00:00:00 /usr/libexec/gdmgreeter --gtk-module=gail:atk-bridge:/usr/lib64/gtk-2.0/modules/libkeymouselistener:/usr/lib64/gtk-2.0/modules/libdwellmouselistener
pipadm   23763 23690 0 17:28 ?        00:00:00 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23777 23763 0 17:28 ?        00:00:08 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23778 23763 0 17:28 ?        00:00:05 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23781 23763 0 17:28 ?        00:00:10 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23783 23763 0 17:28 ?        00:00:04 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm   23786 23763 0 17:28 ?        00:00:03 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
[root@PIPROD work]# more stderr1
(23762) New Child Process created.
(23762) Starting local Command:
Command: ms.sapPIP_DVEBMGS00
           pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
[root@PIPROD work]# more stderr2
(23763) New Child Process created.
(23763) Starting local Command:
Command: dw.sapPIP_DVEBMGS00
           pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
Thu Oct 20 17:28:21 2011
DpVmcInit: initialize vmc
DpVmcInit: vm lib loaded
DpVmcInit: vm linked with kernel
DpVmcInit: vm native libs loaded
ICM up and operational (pid: 23775) ***
[root@PIPROD work]# more stderr3
(23764) New Child Process created.
(23764) Starting local Command:
Command: ig.sapPIP_DVEBMGS00
           -mode=profile
           pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
NiInit3: NI already initialized; param 'maxHandles' ignored (init=1;par=202;cur=2048)
***LOG Q0I=> NiPConnect2: 172.28.30.45:3300: connect (111: Connection refused) [nixxi.cpp 3142]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 7
    (SI_ECONN_REFUSE/111; I4; ST; 172.28.30.45:3300) [nixxi.cpp    3142]
[root@PIPROD work]# more dev_ms
trc file: "dev_ms.new", trc level: 1, release: "711"
[Thr 47613442779232] Thu Oct 20 17:28:21 2011
[Thr 47613442779232] ms/http_max_clients = 500 -> 500
[Thr 47613442779232] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid   390 (AMD/Intel x86_64 with Linux)
relno      7110
patchlevel 0
patchno    81
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
pid        23762
[Thr 47613442779232] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 23762) [msxxserv_mt. 2174]
[Thr 47613442779232] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 47613442779232] load acl file = /usr/sap/PIP/SYS/global/ms_acl_info
[Thr 47613442779232] MsGetOwnIpAddr: my host addresses are :
[Thr 47613442779232]   1 : [172.28.30.45] PIPROD (HOSTNAME)
[Thr 47613442779232]   2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 47613442779232] *** ERROR => NiHsLGetHostName: NiPGetHostByAddr failed (rc=-1) [nixxhsl.cpp 527]
[Thr 47613442779232]   3 : [192.168.122.1] 192.168.122.1 (NILIST)
[Thr 47613442779232] MsHttpInit: full qualified hostname = PIPROD
[Thr 47613442779232] HTTP logging is switch off
[Thr 47613442779232] set HTTP state to LISTEN
[Thr 47613442779232] *** I listen to port sapmsPIP (3600) ***
[Thr 47613442779232] *** I listen to internal port 3900 (3900) ***
[Thr 47613442779232] *** HTTP port 8100 state LISTEN ***
[Thr 47613442779232] CUSTOMER KEY: >Z2073759310<
[Thr 47613442779232] build version=711.2009.08.31
[Thr 47613442779232] Thu Oct 20 17:28:35 2011
[Thr 47613442779232] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
[Thr 47613442779232] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
Edited by: Murali Lakkoju on Oct 20, 2011 4:14 PM

Error connecting 10g DB through 9i client

I have one 10g database on a remote machine and I want to connect this database through 9i client.
Would some please tell me the procedure for connection.
Running netca didn't is not solving my problem.
Thanks,
Bikash

Thanks ...
Yes, I do have a valid netalias configured on the 9i client.
Result of tnsping against a remote 10g database is as below:
===========================================================
C:\oracle\ora902\bin>tnsping usunnbd24.us.oracle.com 10
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 25-AUG-2
05 20:54:54
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
C:\oracle\ora902\network\admin\sqlnet.ora
Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SID=*)(SERVICE_NAME=usunnbd24
us.oracle.com))(ADDRESS=(PROTOCOL=TCP)(HOST=usunnbd24.us.oracle.com)(PORT=1521)
OK (610 msec)
OK (610 msec)
OK (630 msec)
OK (590 msec)
OK (610 msec)
OK (610 msec)
OK (610 msec)
OK (590 msec)
OK (610 msec)
OK (610 msec)
===========================================================
I am trying to connect through sqlplus.
Hope I answered all your questions.Please let me know the worlaround needed.
Thanks,
-Bikash

OIM AD password Sync connector. Connection to AD through SSL

Hi.
I am trying to configure AD password sync connector 9.1.1.5 with patch 14627510 to connecto to AD through SSL.
At this moment, connector is able to connect to OIM through SSL but not to the AD. If i set AD port number to 389 on the connector configuration, everything works fine.
If i set it to 636, it is not able to connect to the AD.
I've imported the AD SSL certificate to <connector install directory>\OIMADPasswordSync\_jvm\lib\security\cacerts and restarted the domain controller but still no luck.
To test that the certificate and everything else is OK, i've also installed a jxplorer and imported the same certificate into <jexplorer install directory>\jxplorer321\security\cacerts. Jxplorer is able to connect to the AD through SSL on port 636 so user credentials, certificate, etc.. are ok
Connector documentation doesn't mention anything regarding SSL connection to AD, it only describes SSL connection to OIM.
Anyone has donde this before? Is there any additional step i should follow to enable SSL connection from AD password sync connector to AD? Does the connector support SSL connection to AD?
Regards.

have you tried importing the cert in cacerts under $JAVA_HOME?

What tools other than cardman can upload applet through UBS port?

The javacard2.2.1 guid says that it supports serial port. But my card reader connect the pc through UBS.
Currently I use cardman from JCOPTool to communicate with card.
Could you please tell my other ways to do that? Thanks.

You can write your own loader as long as you have an interface to the reader. PCSC is the defacto standard to do that and all reader manufacturers support it.
You can also use a kit provided by any card vendor. I recommend you write your own so you can develop a good understanding of how it all works.

Connect HP LTO5 through SAS port to HP Storage

Similar Messages

Maybe you are looking for