Connect hp slate 7 to hp2470 printer

Looking for help with connecting hp slate 7 to 2470 printer, either wirelss or by usb.

Hi,
You may print through the wireless netowrk using either the HP ePrint app or directly from the HP Slate's meus as listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03726451&lc=en&product=3794615&tmp...
If your printer is not connected to your wireless network yet, you will first have to install it on a computer for a wireless network connection to connect it to your network. then it should become available on your HP Slate device.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

How do i connect my MacBook Air to a Printer on my Wireless Network

How do i connect my MacBook Air to a Printer on my Wireless Network ? The printer is connected to a PC running Windows 7. That PC is connected to my Wireless Network. MacBook connects fine to Network, but can't find Printer.

Hi Kappy,
Thanks for your response. I followed your instructions (for Mac OS 10.6.7). It seemed to set up OK, but when I tried to print I kept getting the following Failure Message "Session Setup failed : NT_Status_Invalid_Parameter".
When I get the "Advanced Window" should I enter anything into the "Location" field ? Maybe I am not entering the correct Workgroup, Server or Sharename ? Is there a way to make sure all of that is correct ? I went on to the computer that the printer is connected to and verified all of that, but am not sure I looked in the right places.
When I print via my Home Network from another Windows 7 Computer to the same PC, it works fine. I just can't get it to Print from my MacBook Air.
I thought of using the IP Address. How do I find the IP address of the Computer that is connected to the Printer ? Is it what they call the IPv4 Address, or the IPv4 Default Gateway ?
Appreciate any help you can provide.

My toshiba laptop won't connect to my HP Envy 4500 printer

I have recently attempted connecting my Toshiba laptop, which runs Windows 8, wirelessly to my HP Envy 4500 printer. I'm trying to scan something onto my laptop, which I have done with the printer before. I have the remote app, and I have connected to the printer's wireless network that pops up in the wifi section of my computer. However, when attempting to get the printer to scan, using the option on the printer's screen, it said that no device was connected, and to make sure the software was installed and that scan to pc was enabled. I opened the app on my laptop, hoping to get better results using it that was, but it told me that the printer was offline, though it was clearly on. I am not entirely sure why the printer is not recognizing my laptop, even though my laptop recognizes it. I spent nearly two hours disconnecting and reconnecting, as well as turning the printer off about three times. I am about to uninstall the app and try reinstalling it, but I am doubting the results will be any better.
I see no other way to fix this problem, as there is no USB port in which to connect a USB cable, like myprevious printer, and am wondering if it is my latop, not the printer, that is faulty. It works for printing when it comes to the other devices in my household, but I have had problems even printing with my Toshiba before. I have only attempted scanning with one other device: a HP Pavillion Media Center TV PC desktop. I am starting to think that the scanner is defaulting to only reognizing other HP products, and request any and all advice in fixing this issue.
This question was solved.
View Solution.

Hi AMakkei,
Welcome to the HP Forums!
I understand that you cannot scan with your HP Envy 4500 to your Windows 8 laptop, and I am happy to help you with this connection issue!
For further assistance, I will need to know following information:
If the printer is able to make copies by itself.
If the power cable plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this guide. A 'Computer Not Found' or 'Connection Error' Message Displays during Scanning, and let me know what happens!
Hope to hear from you, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How to connect my MacBook to a hp printer on windows network?

Please help! I had my MacBook connect to my hp 1200 series printer wireless on a windows network. It was working fine for a few weeks. Then yesterday it just stop printing. I can find the printer on my Mac and it sends the message to print and the printer turns on but nothing happens. I have another laptop on the network a Dell computer and it prints fine wirelessly. I originally connected the printer on the MacBook Thursday print/fax then when to + and windows icon found the shared computer then printer then add it and worked. Please help!!!

Take the Mac to the printer and use the USB cable.
Call your respective IT person for support.

Regarding trying to connect my iphone 5 to HP-Print-76-Deskjet 2540

Regarding my HP Print 76 Print Deskjet 2540 ive set up the wireless connection but when i come to print of my phone my phone cant find the printer although the printer shows up in my wireless connections page but im on the iphone 5 and using google cloud print but google cloud print cant the the printer can you help plssss

ade73
Welcome to the HP Community Forum.
You can install the Full Feature Software on your computer(s):
Install Full Feature Software – Printer
You might like to download a copy of the User Guide:
HP Deskjet 2540 All-in-One series - User Gujde
The printer is compatible with AirPrint: Airprint compatible printers
Printing Over a Wireless Network with Apple's AirPrint FAQs
==================================================
Google Bits:
Using Google Cloud Print with your HP Printer
Reminder: You must have the Google Chrome Web Browser installed
on your computer to use Google Cloud Print with a Classic Printer.
Windows, Mac, or Linux
From Google: Connect your classic printers with Google Cloud Print
==================================================
Adding Mobile Devices > Steps 1--2-3 and Troubleshooting
You can add your Mobile devices - on the same network:
HP Mobile Printing
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

My iPad 1 no longer connects to my photosmart hp 5520 printer anymore why is this can anyone help this has been since the update

My iPad 1 no longer connects to my photosmart hp 5520 printer since the update I now have to unconect from my bt and connect to the printer then I have to re conect bt again after which make it hard work it was all done through the bt line before how do I get it back to do this again any help out there please

Hi Duffynicol,
I'm sorry to hear you are having issues with your iPad and your printer. From your description of the issue, it sounds like your printer may have become disconnected from your WiFi network (BT?). If that is the case, you may find the information and steps outlined in the following article helpful:
Connect an AirPrint printer to a Wi-Fi network - Apple Support
Regards,
- Brenden

After upgrading to 10.6 I cannot use AppleTalk to connect to my HP LaserJet 4ML printer.

After upgrading to 10.6 I can no longer use AppleTalk to connect to my HP LaserJet 4ML printer. So I am now using a JetDirect 300X box connected to the parallel port of the printer and an ethernet cable into my Linksys router. But I have had no luck with this setup. I was able to get a printout from the JetDirect box that gave me the IP address of 184.35.129.151 which I tried using in the printer setup dialog box. No luck. My ethernet network IP is 192.168.1.100, so I tried putting in 192.168.1.2, etc. and 192.168.1.151 (151 being the JetDirect IP address). Still no luck. When I do the printer setup it seems to be finding the printer but when I try to print it cannot connect. I have also tried putting the ethernet cable from the JetDirect box directly into the other rear port on my MacPro. No difference.
The HP website clearly says that this printer can be connected to a Mac using the JetDirect box. But the configuration page that I printed out from the printer doesn't say anything about IP addresses and there is nothing in the manual about IP connection. Do I need to find the IP address of this printer, and how do I find that?
I would really like to continue to use this printer. Any help would be much appreciated.

Sorry about that. Let's see what we can do. Take a look at this site:
http://www.mikestechblog.com/joomla/networking-section/network-printing-category /52-how-to-configure-an-hp-jetdirect-300x-print-server.html
It's to set up on a Windows PC but just get an IP address at step 8. Then access the JetDirect's admin area using the IP address. Make the address fixed so your router cant change it. Then using System Preferences>Print & Fax you need to add the printer using the IPP protocol. If the IPP protocol doesn't work then try the HP JetDirect.
It's been a while since I had my HP LJ4MP set up that way so my memory is a bit fuzzy on it. Once you get it - it works. The only other thought is to get a cable with a 25 pin on one end and USB on the other.

Connecting to a HP Officejet 7610 printer when using a Mac running OSX 10.5.8

Connecting to a HP Officejet 7610 printer when using a Mac running OSX 10.5.8

Did you download & install the 10.5.8 driver?
http://www.hp4driver.com/2015/01/hp-officejet-7610-driver-download.html

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router and I can surf the web. I wonder if some security setting may be keeping it from connecting to my MacBook Pro.

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router.
I can surf the web. My wife can print from her PC wirelessly on it.
I wonder if some security setting may be keeping it from connecting to my MacBook Pro. I've installed the software, firmware and driver updates but
it still shows "off line"
with the printer power on. Any suggestions?

All I can suggest right now is back up first the try to reset the printing system, (all printers in the list will be removed).
Then connect directly to the printer via ethernet or to the Mac using USB and restart the efforts you have made up until now.
As for router settings, it's possible but not likely that your router only allows a small number of clients. It's also posible that you have MAC address filtering on, lastly are you using the correct wireless protocol, (802.11a/b/g WEP or WPA etc)?

Connecting wirelessly to a office copier/ printer

I am trying to connect wirelessly to the multifunction copier/ printer at work. I would like to be able to send files to my mailbox that is stored on the printer side of the machine. I am connected to my job's staff wireless internet. However, I have no idea where to even start... Please help!

Hi!
A couple of things to figure out...
1.) Is the printer you're trying to access on the same network you're currently connected to in the office? Reason I ask, some offices have one subnet for WiFi and another subnet for Ethernet (for security reasons).
2.) If so, what type of printer is it? You may require printer drivers for that specific unit to be installed onto your computer.
3.) If so, what is the IP address of the printer? Does it support Bonjour network services?
You can connect to a printer over a network, typically by adding it via the default browser. The default browser is accessible via the "Add a Printer" dialog box which is selected within "Print & Fax" via System Preferences.

Unable to connect my Macbook to a network printer

Hi,
My problem is specific to Canon iR2016 printer model which is connected to a router which in turn is connected to a wireless router. I want to connect my macbook pro to this printer, which somehow I am not able to.
Till now I have gone to "Print & Fax", clicked on "+" sign, then clicked on the "Windows" tab. There I can see the network printer listed. I select it, then asks for software driver or printer model. Now here I select Printer model, but my model iR2016 is not listed. Then I select generic Post script printer and Add. The printer gets added, but when I print, nothing prints. I also tried with generic laser printer option, but no luck.
Look forward to feedback.
Thanks.

Checking the Canon Australia web site the iR2016 lists UFR2 and PCL5e/PCL6 as supported print languages. Postscript was an option and given that the Generic PS did not work then it would be safe to assume that this option is not installed.
If you have installed the UFR2 v1.80 driver then you add this printer by selecting More Printers > Canon IP (UFR II). If you have installed the v2.xx driver then you simply select IP > LPD for the protocol. This then requires you to enter the IP address of the iR2016 and then you can browse for the iR2016 in the Print Using menu. However this is for a direct IP connection. You cannot use the UFR2 driver via the Windows share, which you mention trying.
So if the printer has its own Ethernet connection to the network then select to add the queue using IP > LPD, enter the IP address of the iR2016 and in the Print Using menu type 2016 to filter the list to the correct model. It should show UFRII in the name. Select this and you should be able to print.

HT3500 How do I connect my iPad to my wireless printer?

How do I connect my iPad to my wireless printer?

Your iPad should be able to print directly to your printer if it is an AirPrint compatible model.
Check this Apple support document to see if your printer is compatible.
http://support.apple.com/kb/HT4356
Post back on your findings.

Hi, I cant connect my imac to my wireless printer, epson wf-7515

Hello,
Im havin trouble connecting my imac to my epson printer. I can get the printer connected to the router and the computer is connected to the router.
I am loading the cd and following the on screen displays but they will not connect to each other. Any help will be grately reiceved.
Thanks.

Hello Frank,
I have 2 articles to recommend for you.
The first one is named OS X Mountain Lion: Troubleshoot a network printer found here http://support.apple.com/kb/PH11070.
The second is Troubleshooting printer issues in OS X, http://support.apple.com/kb/ts3147
All the best,
Sterling

FAX through HP laser jet 3050 which is connected on a Windows Network. I m also connected to this Network and i print through HP LJ 3050. How can i sent fax through HP LJ 3050?

HOW can i sent FAX through HP laser jet 3050 which is connected on a Windows Network.
I m also connected to this Network and i print through HP LJ 3050. How can i sent fax through HP LJ 3050?

Welcome to Apple Support Communities.
Apparently there is no HP software support for the HP 3050 fax or scan functions with OS X 'Lion' 10.7:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02950970 #A1
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c0292511 4
Alternatives?
1) Run a Windows client on the Mac using Boot Camp or one of the available virtualization programs like Parallels, VMware Fusion, and others so you can run the latest Windows print/fax/scan driver.
2) If your Mac hardware supports an older OS X version, downgrade to one (Snow Leopard?) that still had support for print, fax and scan.
3) Buy a newer printer. A 2007 model is 5+ years old, and should now be fully depreciated in a business.

Hello, I currently have a MacBook snow leapord and i'm trying to connect it with my Canon MP560 printer, i put in the CD and installed everything properly but now when i add a printer it says a Queue already exists, i click continue and nothing happens???

Hello,
I'm using a MacBook Snow Leapord and I'm trying to connect it with my Canon MP560 printer/scanner.
I installed the CD and followed along with the manual and did everything it asked, at the end it told me it was finished.
So then I went to go print something and an error had occured so i went to the file menu on Microsoft Word for
Mac and clicked Print/Add Printer and then i click on the Canon MP560 series-1 as it was the only one to click on.
When I did it stated that I already has a Queue for this printer and if I'd like to add a new one so I clicked continue and nothing
had happend. PLEASE HELP
sincerely,
Laura.

I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
But, before doing this, download the last good driver, CDs usually contain outdated drivers.

Connect hp slate 7 to hp2470 printer

Similar Messages

Maybe you are looking for